EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

bgmac: backport small DMA fix

Browse Source 
It's supposed to significantly improve performance but doesn't seem to
affect Northstar unfortunately. It seems only some other platforms were
limited because of this DMA setup mistake.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
This commit is contained in:
Rafał Miłecki 2016-11-07 14:40:24 +01:00
parent 4fae9db765
commit e2a65f4aa5
4 changed files with 88 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

25
target/linux/generic/patches-4.4/077-0004-net-bgmac-fix-spelling-mistake-connecton-connection.patch Normal file
View File

@ -0,0 +1,25 @@
From c121f72a66c5f92fbe2fc53baa274eef39875cec Mon Sep 17 00:00:00 2001
From: Colin Ian King <colin.king@canonical.com>
Date: Mon, 24 Oct 2016 23:46:18 +0100
Subject: [PATCH] net: bgmac: fix spelling mistake: "connecton" -> "connection"
trivial fix to spelling mistake in dev_err message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/broadcom/bgmac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -1465,7 +1465,7 @@ static int bgmac_phy_connect(struct bgma
phy_dev = phy_connect(bgmac->net_dev, bus_id, &bgmac_adjust_link,
PHY_INTERFACE_MODE_MII);
if (IS_ERR(phy_dev)) {
- dev_err(bgmac->dev, "PHY connecton failed\n");
+ dev_err(bgmac->dev, "PHY connection failed\n");
return PTR_ERR(phy_dev);
}

59
target/linux/generic/patches-4.4/077-0005-bgmac-stop-clearing-DMA-receive-control-register-rig.patch Normal file
View File

@ -0,0 +1,59 @@
From fcdefccac976ee51dd6071832b842d8fb41c479c Mon Sep 17 00:00:00 2001
From: Andy Gospodarek <gospo@broadcom.com>
Date: Mon, 31 Oct 2016 13:32:03 -0400
Subject: [PATCH] bgmac: stop clearing DMA receive control register right after
it is set
Current bgmac code initializes some DMA settings in the receive control
register for some hardware and then immediately clears those settings.
Not clearing those settings results in ~420Mbps *improvement* in
throughput; this system can now receive frames at line-rate on Broadcom
5871x hardware compared to ~520Mbps today. I also tested a few other
values but found there to be no discernible difference in CPU
utilization even if burst size and prefetching values are different.
On the hardware tested there was no need to keep the code that cleared
all but bits 16-17, but since there is a wide variety of hardware that
used this driver (I did not look at all hardware docs for hardware using
this IP block), I find it wise to move this call up and clear bits just
after reading the default value from the hardware rather than completely
removing it.
This is a good candidate for -stable >=3.14 since that is when the code
that was supposed to improve performance (but did not) was introduced.
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Fixes: 56ceecde1f29 ("bgmac: initialize the DMA controller of core...")
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/broadcom/bgmac.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
index 31ca204..91cbf92 100644
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -307,6 +307,10 @@ static void bgmac_dma_rx_enable(struct bgmac *bgmac,
u32 ctl;
ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL);
+
+ /* preserve ONLY bits 16-17 from current hardware value */
+ ctl &= BGMAC_DMA_RX_ADDREXT_MASK;
+
if (bgmac->feature_flags & BGMAC_FEAT_RX_MASK_SETUP) {
ctl &= ~BGMAC_DMA_RX_BL_MASK;
ctl |= BGMAC_DMA_RX_BL_128 << BGMAC_DMA_RX_BL_SHIFT;
@@ -317,7 +321,6 @@ static void bgmac_dma_rx_enable(struct bgmac *bgmac,
ctl &= ~BGMAC_DMA_RX_PT_MASK;
ctl |= BGMAC_DMA_RX_PT_1 << BGMAC_DMA_RX_PT_SHIFT;
}
- ctl &= BGMAC_DMA_RX_ADDREXT_MASK;
ctl |= BGMAC_DMA_RX_ENABLE;
ctl |= BGMAC_DMA_RX_PARITY_DISABLE;
ctl |= BGMAC_DMA_RX_OVERFLOW_CONT;
--
2.10.1

2
target/linux/generic/patches-4.4/170-net-bgmac-fix-reversed-checks-for-clock-control-flag.patch
View File

@ -18,7 +18,7 @@ Cc: Jon Mason <jon.mason@broadcom.com>
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -1046,9 +1046,9 @@ static void bgmac_enable(struct bgmac *b
@@ -1049,9 +1049,9 @@ static void bgmac_enable(struct bgmac *b
mode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >>
BGMAC_DS_MM_SHIFT;

6
target/linux/generic/patches-4.4/773-bgmac-add-srab-switch.patch
View File

@ -12,7 +12,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
#include <linux/bcm47xx_nvram.h>
#include "bgmac.h"
@@ -1400,6 +1401,17 @@ static const struct ethtool_ops bgmac_et
@@ -1403,6 +1404,17 @@ static const struct ethtool_ops bgmac_et
.get_drvinfo = bgmac_get_drvinfo,
};
@ -30,7 +30,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
/**************************************************
* MII
**************************************************/
@@ -1536,6 +1548,14 @@ int bgmac_enet_probe(struct bgmac *info)
@@ -1539,6 +1551,14 @@ int bgmac_enet_probe(struct bgmac *info)
net_dev->hw_features = net_dev->features;
net_dev->vlan_features = net_dev->features;
@ -45,7 +45,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
err = register_netdev(bgmac->net_dev);
if (err) {
dev_err(bgmac->dev, "Cannot register net device\n");
@@ -1559,6 +1579,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe);
@@ -1562,6 +1582,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe);
void bgmac_enet_remove(struct bgmac *bgmac)
{