port wan_device changes from whiterussian to kamikaze
SVN-Revision: 2993
This commit is contained in:
parent
99ddd56ca3
commit
e272d81c21
@ -26,7 +26,7 @@ find_name()
|
||||
}
|
||||
;;
|
||||
*)
|
||||
[ "$(nvram get ${IFPROTO}_ifname)" = "$INTERFACE" \
|
||||
[ "$(nvram get ${IFTYPE}_device)" = "$INTERFACE" \
|
||||
-a -x /sbin/ifup.${IFPROTO} ] && return 0
|
||||
;;
|
||||
esac
|
||||
|
@ -15,7 +15,7 @@ case "$if_proto" in
|
||||
""|none) exit 0;;
|
||||
esac
|
||||
|
||||
[ "${if%%[0-9]*}" = "ppp" ] && if="$(nvram get ${if_proto}_ifname)"
|
||||
[ "${if%%[0-9]*}" = "ppp" ] && if="$(nvram get ${type}_device)"
|
||||
|
||||
if [ "${if%%[0-9]}" = "br" ]; then
|
||||
for sif in $(nvram get ${type}_ifnames); do
|
||||
|
@ -23,7 +23,7 @@ case "$if_proto" in
|
||||
none|"") exit 0;;
|
||||
esac
|
||||
|
||||
[ "${if%%[0-9]*}" = "ppp" ] && if="$(nvram get ${if_proto}_ifname)"
|
||||
[ "${if%%[0-9]*}" = "ppp" ] && if="$(nvram get ${type}_device)"
|
||||
|
||||
if [ "${if%%[0-9]}" = "br" ]; then
|
||||
for sif in $(nvram get ${type}_ifnames); do
|
||||
|
@ -14,7 +14,7 @@ for module in slhc ppp_generic pppox pppoe; do
|
||||
/sbin/insmod $module 2>&- >&-
|
||||
done
|
||||
|
||||
IFNAME=$(nvram get pppoe_ifname)
|
||||
IFNAME=$(nvram get ${type}_device)
|
||||
USERNAME=$(nvram get ppp_username)
|
||||
PASSWORD=$(nvram get ppp_passwd)
|
||||
KEEPALIVE=$(nvram get ppp_redialperiod)
|
||||
|
@ -33,7 +33,7 @@ do_ifup $PPTP_PROTO $type
|
||||
|
||||
# hack for some buggy ISPs
|
||||
NETMASK=$(nvram get ${type}_netmask)
|
||||
IFNAME=$(nvram get pptp_ifname)
|
||||
IFNAME=$(nvram get ${type}_device)
|
||||
[ -z "$NETMASK" -o -z "$IFNAME" ] || ifconfig $IFNAME netmask $NETMASK
|
||||
|
||||
/usr/sbin/pppd \
|
||||
|
@ -88,10 +88,10 @@ END {
|
||||
print "# pppoe: PPP over Ethernet"
|
||||
print "# pptp: Point-to-Point tunneling Protocol"
|
||||
print "# for pppoe and pptp you need to use wan_ifname=\"ppp0\""
|
||||
print "# and {pppoe,pptp}ifname=\"" c["wan_ifname"] "\")"
|
||||
print ""
|
||||
print "wan_proto=dhcp"
|
||||
p("wan_ifname")
|
||||
print "wan_device=\"" c["wan_ifname"] "\""
|
||||
print "# wan_ipaddr=\"192.168.0.2\""
|
||||
print "# wan_netmask=\"255.255.255.0\""
|
||||
print "# wan_gateway=\"192.168.0.1\""
|
||||
@ -99,8 +99,6 @@ END {
|
||||
print ""
|
||||
print "## PPP over Ethernet and PPTP"
|
||||
print "# wan_ifname=\"ppp0\""
|
||||
print "# pppoe_ifname=\"" c["wan_ifname"] "\""
|
||||
print "# pptp_ifname=\"" c["wan_ifname"] "\""
|
||||
print "# pptp_server_ip=\"192.168.0.1\""
|
||||
}
|
||||
' > /etc/config/network
|
||||
|
@ -107,6 +107,14 @@ case "$(nvram get productid)" in
|
||||
nvram set lan_ifnames="eth1 eth2"
|
||||
nvram set wan_ifname="none"
|
||||
;;
|
||||
*)
|
||||
# wl-500g defaults. these are placed here, because WL-HDD and WL-300g
|
||||
# might have the same nvram settings.
|
||||
[ "$(nvram get boardnum)" = "asusX" \
|
||||
-a "$(nvram get boardtype)" = "bcm94710dev" ] && {
|
||||
nvram_default wan_device "eth1"
|
||||
}
|
||||
;;
|
||||
esac
|
||||
|
||||
# hacks for wap54g hardware
|
||||
@ -130,21 +138,12 @@ esac
|
||||
nvram_default wl0id 0x4320
|
||||
}
|
||||
|
||||
WAN_PROTO="$(nvram get wan_proto)"
|
||||
[ "$WAN_PROTO" = "pptp" \
|
||||
-o "$WAN_PROTO" = "pppoe" ] && {
|
||||
WAN_IFNAME="$(nvram get wan_ifname)"
|
||||
[ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] || {
|
||||
nvram set wan_ifname=ppp0
|
||||
nvram set ${WAN_PROTO}_ifname="$WAN_IFNAME"
|
||||
}
|
||||
}
|
||||
|
||||
# defaults
|
||||
nvram_default lan_ifname "br0"
|
||||
nvram_default lan_ifnames "$FAILSAFE_ifnames"
|
||||
|
||||
nvram_default wan_ifname "vlan1"
|
||||
nvram_default wan_device "vlan1"
|
||||
nvram_default wan_proto "dhcp"
|
||||
|
||||
nvram_default wl0_ssid OpenWrt
|
||||
@ -152,6 +151,13 @@ nvram_default wl0_mode ap
|
||||
nvram_default wl0_infra 1
|
||||
nvram_default wl0_radio 1
|
||||
|
||||
WAN_PROTO="$(nvram get wan_proto)"
|
||||
WAN_IFNAME="$(nvram get wan_ifname)"
|
||||
case "$WAN_PROTO" in
|
||||
pp*) [ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] || nvram set wan_ifname=ppp0;;
|
||||
*) [ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] && nvram set wan_ifname="$(nvram get wan_device)";;
|
||||
esac
|
||||
|
||||
[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
|
||||
# if default wifi mac, set two higher than the lan mac
|
||||
nvram set il0macaddr=$(nvram get et0macaddr|
|
||||
|
@ -57,9 +57,8 @@ END {
|
||||
# WAP54G
|
||||
if ((nvram["boardnum"] == "2") || \
|
||||
(nvram["boardnum"] == "1024")) {
|
||||
c["lan_ifnames"]="eth1 eth2"
|
||||
c["lan_ifnames"]="eth0 eth1"
|
||||
c["wan_ifname"]=""
|
||||
c["unused_ifnames"]="eth0"
|
||||
}
|
||||
|
||||
print "#### VLAN configuration "
|
||||
@ -79,7 +78,6 @@ END {
|
||||
print "# lan_gateway=\"192.168.1.1\""
|
||||
|
||||
print ""
|
||||
p("unused_ifnames")
|
||||
print ""
|
||||
|
||||
print "#### WAN configuration"
|
||||
@ -90,10 +88,10 @@ END {
|
||||
print "# pppoe: PPP over Ethernet"
|
||||
print "# pptp: Point-to-Point tunneling Protocol"
|
||||
print "# for pppoe and pptp you need to use wan_ifname=\"ppp0\""
|
||||
print "# and {pppoe,pptp}ifname=\"" c["wan_ifname"] "\")"
|
||||
print ""
|
||||
print "wan_proto=dhcp"
|
||||
p("wan_ifname")
|
||||
print "wan_device=\"" c["wan_ifname"] "\""
|
||||
print "# wan_ipaddr=\"192.168.0.2\""
|
||||
print "# wan_netmask=\"255.255.255.0\""
|
||||
print "# wan_gateway=\"192.168.0.1\""
|
||||
@ -101,8 +99,6 @@ END {
|
||||
print ""
|
||||
print "## PPP over Ethernet and PPTP"
|
||||
print "# wan_ifname=\"ppp0\""
|
||||
print "# pppoe_ifname=\"" c["wan_ifname"] "\""
|
||||
print "# pptp_ifname=\"" c["wan_ifname"] "\""
|
||||
print "# pptp_server_ip=\"192.168.0.1\""
|
||||
}
|
||||
' > /etc/config/network
|
||||
|
Loading…
Reference in New Issue
Block a user