bcm63xx: lzma-loader: rely on CHIP_ID for UART address

lzma-loader uart output wasn't working on BCM3380/BCM6362 because these
SoCs have the same processor ID.
Let's use CHIP_ID for establishing the UART base address.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

target/linux/bcm63xx/image/Makefile

@@ -17,7 +17,8 @@ LOADER_MAKEOPTS= \
 		KDIR=$(KDIR) \
 		LOADADDR=$(KERNEL_LOADADDR) \
 		RAMSIZE=$(RAMSIZE) \
-		LZMA_TEXT_START=$(LZMA_TEXT_START)
+		LZMA_TEXT_START=$(LZMA_TEXT_START) \
+		CHIP_ID=$(CHIP_ID)
 
 RELOCATE_MAKEOPTS= \
 		CACHELINE_SIZE=16 \

target/linux/bcm63xx/image/lzma-loader/Makefile

@@ -1,4 +1,6 @@
 #
+# Copyright (C) 2020 Álvaro Fernández Rojas <noltari@gmail.com>
+# Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
 # Copyright (C) 2011 OpenWrt.org
 # Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
 #
@@ -14,6 +16,25 @@ LOADER_NAME	:= $(basename $(notdir $(LOADER)))
 LOADER_DATA 	:=
 TARGET_DIR	:=
 
+UART_BASE_3329 := 0xb0000100
+UART_BASE_3368 := 0xfff8c100
+UART_BASE_3380 := 0xb4e00200
+UART_BASE_3383 := 0xb4e00500
+UART_BASE_3384 := 0xb4e00500
+UART_BASE_6318 := 0xb0000100
+UART_BASE_6328 := 0xb0000100
+UART_BASE_6338 := 0xfffe0300
+UART_BASE_6345 := 0xfffe0300
+UART_BASE_6348 := 0xfffe0300
+UART_BASE_6358 := 0xfffe0100
+UART_BASE_6362 := 0xb0000100
+UART_BASE_6368 := 0xb0000100
+UART_BASE_63268 := 0xb0000180
+UART_BASE_6816 := 0xb0000100
+UART_BASE_6818 := 0xb0000100
+UART_BASE_6828 := 0xb0000180
+UART_BASE := $(if $(UART_BASE_$(CHIP_ID)),$(UART_BASE_$(CHIP_ID)),0)
+
 ifeq ($(TARGET_DIR),)
 TARGET_DIR	:= $(KDIR)
 endif
@@ -35,6 +56,7 @@ loader-compile: $(PKG_BUILD_DIR)/.prepared
 	$(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE="$(TARGET_CROSS)" \
 		LZMA_TEXT_START=$(LZMA_TEXT_START) \
 		LOADER_DATA=$(LOADER_DATA) \
+		UART_BASE=$(UART_BASE) \
 		clean all
 
 loader.elf: $(PKG_BUILD_DIR)/loader.elf

target/linux/bcm63xx/image/lzma-loader/src/Makefile

@@ -2,6 +2,8 @@
 # Makefile for the LZMA compressed kernel loader for
 # Atheros AR7XXX/AR9XXX based boards
 #
+# Copyright (C) 2020 Álvaro Fernández Rojas <noltari@gmail.com>
+# Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
 # Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
 #
 # Some parts of this file was based on the OpenWrt specific lzma-loader
@@ -34,6 +36,7 @@ CFLAGS		= -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
 		  -mabi=32 -march=mips32 \
 		  -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
 CFLAGS		+= -D_LZMA_PROB32
+CFLAGS		+= -DUART_BASE=$(UART_BASE)
 
 ASFLAGS		= $(CFLAGS) -D__ASSEMBLY__
 
@@ -82,6 +85,3 @@ mrproper: clean
 
 clean:
 	rm -f loader *.elf *.bin *.o
-
-
-

target/linux/bcm63xx/image/lzma-loader/src/board.c

@@ -1,6 +1,7 @@
 /*
  * BCM63XX specific implementation parts
  *
+ * Copyright (C) 2020 Álvaro Fernández Rojas <noltari@gmail.com>
  * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -10,7 +11,6 @@
 
 #include <stddef.h>
 #include "config.h"
-#include "cp0regdef.h"
 
 #define READREG(r)	*(volatile unsigned int *)(r)
 #define WRITEREG(r,v)	*(volatile unsigned int *)(r) = v
@@ -18,14 +18,12 @@
 #define UART_IR_REG	0x10
 #define UART_FIFO_REG	0x14
 
-unsigned long uart_base;
-
 static void wait_xfered(void)
 {
         unsigned int val;
 
         do {
-                val = READREG(uart_base + UART_IR_REG);
+                val = READREG(UART_BASE + UART_IR_REG);
                 if (val & (1 << 5))
                         break;
         } while (1);
@@ -33,79 +31,10 @@ static void wait_xfered(void)
 
 void board_putc(int ch)
 {
-	if (!uart_base)
+	if (!UART_BASE)
 		return;
 
 	wait_xfered();
-        WRITEREG(uart_base + UART_FIFO_REG, ch);
+	WRITEREG(UART_BASE + UART_FIFO_REG, ch);
 	wait_xfered();
 }
-
-#define PRID_IMP_BMIPS32_REV4	0x4000
-#define PRID_IMP_BMIPS32_REV8	0x8000
-#define PRID_IMP_BMIPS3300	0x9000
-#define PRID_IMP_BMIPS3300_ALT	0x9100
-#define PRID_IMP_BMIPS3300_BUG	0x0000
-#define PRID_IMP_BMIPS43XX	0xa000
-
-void board_init(void)
-{
-	unsigned long prid, chipid, chipid_reg;
-
-	prid = read_32bit_c0_register($15, 0);
-
-	switch (prid & 0xff00) {
-	case PRID_IMP_BMIPS32_REV4:
-	case PRID_IMP_BMIPS32_REV8:
-	case PRID_IMP_BMIPS3300_ALT:
-	case PRID_IMP_BMIPS3300_BUG:
-		chipid_reg = 0xfffe0000;
-		break;
-	case PRID_IMP_BMIPS3300:
-		if ((prid & 0xff) >= 0x33)
-			chipid_reg = 0xb0000000;
-		else
-			chipid_reg = 0xfffe0000;
-		break;
-	case PRID_IMP_BMIPS43XX:
-		if ((prid & 0xff) == 0x04)
-			chipid_reg = 0xfff8c000;
-		else if ((prid & 0xff) == 0x70)
-			return;	/* FIXME: 0002a070 can be 6362 and 3380 */
-		else if ((prid & 0xff) >= 0x30)
-			chipid_reg = 0xb0000000;
-		else
-			chipid_reg = 0xfffe0000;
-		break;
-	default:
-		return;
-	}
-
-	chipid = READREG(chipid_reg);
-
-	switch (chipid >> 16) {
-	case 0x3368:
-	case 0x6318:
-	case 0x6328:
-	case 0x6358:
-	case 0x6362:
-	case 0x6368:
-	case 0x6369:
-		uart_base = chipid_reg + 0x100;
-		break;
-	case 0x6316:
-	case 0x6326:
-		uart_base = chipid_reg + 0x180;
-		break;
-	case 0x3380:
-		uart_base = chipid_reg + 0x200;
-		break;
-	case 0x6338:
-	case 0x6345:
-	case 0x6348:
-		uart_base = chipid_reg + 0x300;
-		break;
-	default:
-		return;
-	}
-}

target/linux/bcm63xx/image/lzma-loader/src/loader.c

@@ -44,8 +44,6 @@
 extern unsigned char workspace[];
 
 
-extern void board_init(void);
-
 static CLzmaDecoderState lzma_state;
 static unsigned char *lzma_data;
 static unsigned long lzma_datasize;
@@ -135,11 +133,10 @@ void loader_main(unsigned long reg_a0, unsigned long reg_a1,
 			      unsigned long);
 	int res;
 
-	board_init();
-
 	printf("\n\nOpenWrt kernel loader for BCM63XX\n");
 	printf("Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>\n");
 	printf("Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>\n");
+	printf("Copyright (C) 2020 Alvaro Fernandez Rojas <noltari@gmail.com>\n");
 
 	lzma_init_data();