ath79: add support for Hak5 Packet Squirrel
Hak5 Packet Squirrel is a pocket-sized device dedicated for pentesters
(MITM attacks). This device is based on Atheros AR9331 but it lacks
WiFi. Support for it was first introduced in 950b278c81 (ar71xx).
Specifications:
- Atheros AR9331
- 400/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 16 MB of flash (SPI NOR)
- 2x RJ45 10/100 Mbps Ethernet (AR9331)
- 1x USB 2.0
- 1x RGB LED, 1x button, 1x 4-way mechanical switch
- 1x Micro USB Type-B for main power input
Flash instruction:
You can use sysupgrade image directly in vendor firmware which is based
on OpenWrt/LEDE.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This commit is contained in:
Piotr Dymacz
parent
a2f3a58607
commit
b33ce8c535
@ -1,9 +1,6 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "ar9331.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "ar9331_hak5_lan-turtle.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Hak5 LAN Turtle";
|
||||
@ -13,21 +10,6 @@
|
||||
led-boot = &led_system;
|
||||
led-failsafe = &led_system;
|
||||
led-upgrade = &led_system;
|
||||
serial0 = &uart;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&enable_gpio11>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
@ -42,79 +24,3 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
mtd-mac-address = <&uboot 0x1fc00>;
|
||||
mtd-mac-address-increment = <(-1)>;
|
||||
|
||||
gmac-config {
|
||||
device = <&gmac>;
|
||||
|
||||
switch-phy-addr-swap = <1>;
|
||||
switch-phy-swap = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
ð1 {
|
||||
status = "okay";
|
||||
|
||||
mtd-mac-address = <&uboot 0x1fc00>;
|
||||
mtd-mac-address-increment = <1>;
|
||||
};
|
||||
|
||||
&pinmux {
|
||||
enable_gpio11: pinmux_enable_gpio11 {
|
||||
pinctrl-single,bits = <0x0 0x0 0x4>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
|
||||
num-cs = <1>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
m25p,fast-read;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
uboot: partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
label = "firmware";
|
||||
reg = <0x020000 0xfd0000>;
|
||||
compatible = "tplink,firmware";
|
||||
};
|
||||
|
||||
partition@ff0000 {
|
||||
label = "art";
|
||||
reg = <0xff0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
102
target/linux/ath79/dts/ar9331_hak5_lan-turtle.dtsi
Normal file
102
target/linux/ath79/dts/ar9331_hak5_lan-turtle.dtsi
Normal file
@ -0,0 +1,102 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "ar9331.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial0 = &uart;
|
||||
};
|
||||
|
||||
keys: keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&enable_gpio11>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
mtd-mac-address = <&uboot 0x1fc00>;
|
||||
mtd-mac-address-increment = <(-1)>;
|
||||
|
||||
gmac-config {
|
||||
device = <&gmac>;
|
||||
|
||||
switch-phy-addr-swap = <1>;
|
||||
switch-phy-swap = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
ð1 {
|
||||
status = "okay";
|
||||
|
||||
mtd-mac-address = <&uboot 0x1fc00>;
|
||||
mtd-mac-address-increment = <1>;
|
||||
};
|
||||
|
||||
&pinmux {
|
||||
enable_gpio11: pinmux_enable_gpio11 {
|
||||
pinctrl-single,bits = <0x0 0x0 0x4>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
|
||||
num-cs = <1>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
m25p,fast-read;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
uboot: partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
label = "firmware";
|
||||
reg = <0x020000 0xfd0000>;
|
||||
compatible = "tplink,firmware";
|
||||
};
|
||||
|
||||
partition@ff0000 {
|
||||
label = "art";
|
||||
reg = <0xff0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
64
target/linux/ath79/dts/ar9331_hak5_packet-squirrel.dts
Normal file
64
target/linux/ath79/dts/ar9331_hak5_packet-squirrel.dts
Normal file
@ -0,0 +1,64 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "ar9331_hak5_lan-turtle.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Hak5 Packet Squirrel";
|
||||
compatible = "hak5,packet-squirrel", "qca,ar9331";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_system_green;
|
||||
led-failsafe = &led_system_green;
|
||||
led-running = &led_system_green;
|
||||
led-upgrade = &led_system_green;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_system_green: system-green {
|
||||
label = "packet-squirrel:green:system";
|
||||
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
system-blue {
|
||||
label = "packet-squirrel:blue:system";
|
||||
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
system-red {
|
||||
label = "packet-squirrel:red:system";
|
||||
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&keys {
|
||||
sw1 {
|
||||
label = "sw1";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
sw2 {
|
||||
label = "sw2";
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
sw3 {
|
||||
label = "sw3";
|
||||
linux,code = <BTN_2>;
|
||||
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
sw4 {
|
||||
label = "sw4";
|
||||
linux,code = <BTN_3>;
|
||||
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
@ -503,7 +503,8 @@ ath79_setup_macs()
|
||||
enterasys,ws-ap3705i)
|
||||
label_mac=$(mtd_get_mac_ascii u-boot-env0 ethaddr)
|
||||
;;
|
||||
hak5,lan-turtle)
|
||||
hak5,lan-turtle|\
|
||||
hak5,packet-squirrel)
|
||||
label_mac=$(mtd_get_mac_binary u-boot 0x1fc00)
|
||||
;;
|
||||
iodata,etg3-r)
|
||||
|
||||
@ -1032,6 +1032,19 @@ define Device/hak5_lan-turtle
|
||||
endef
|
||||
TARGET_DEVICES += hak5_lan-turtle
|
||||
|
||||
define Device/hak5_packet-squirrel
|
||||
$(Device/tplink-16mlzma)
|
||||
SOC := ar9331
|
||||
DEVICE_VENDOR := Hak5
|
||||
DEVICE_MODEL := Packet Squirrel
|
||||
TPLINK_HWID := 0x5351524c
|
||||
IMAGES := sysupgrade.bin
|
||||
DEVICE_PACKAGES := kmod-usb-chipidea2 -iwinfo -kmod-ath9k -swconfig \
|
||||
-uboot-envtools -wpad-basic-wolfssl
|
||||
SUPPORTED_DEVICES += packet-squirrel
|
||||
endef
|
||||
TARGET_DEVICES += hak5_packet-squirrel
|
||||
|
||||
define Device/iodata_etg3-r
|
||||
SOC := ar9342
|
||||
DEVICE_VENDOR := I-O DATA
|
||||
|
||||
Loading…
Reference in New Issue
Block a user