ramips: add preliminary support for SGE AP-MTKH7-0006 developer board

Signed-off-by: Felix Fietkau <nbd@nbd.name>
This commit is contained in:
Felix Fietkau 2018-10-15 12:52:34 +02:00
parent 363ce4329d
commit b1db6d0539
4 changed files with 125 additions and 0 deletions

View File

@ -415,6 +415,7 @@ ramips_setup_interfaces()
"0:lan:3" "1:lan:2" "2:lan:1" "3:wan" "6@eth0" "0:lan:3" "1:lan:2" "2:lan:1" "3:wan" "6@eth0"
;; ;;
planex,mzk-dp150n|\ planex,mzk-dp150n|\
sge,ap-mtkh7-0006|\
vocore,vocore-8m|\ vocore,vocore-8m|\
vocore,vocore-16m) vocore,vocore-16m)
ucidef_add_switch "switch0" \ ucidef_add_switch "switch0" \

View File

@ -0,0 +1,111 @@
/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "sge,ap-mtkh7-0006", "mediatek,mt7621-soc";
model = "SGE AP-MTKH7-0006";
chosen {
bootargs = "console=ttyS0,57600";
};
wdt@18 {
status = "okay";
compatible = "linux,wdt-gpio";
always-running;
hw_algo = "level";
hw_margin_ms = <60000>;
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
};
};
&wdt {
status = "disabled";
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
partition@850000 {
label = "firmware2";
reg = <0x850000 0x7b0000>;
};
};
};
};
&ethernet {
mtd-mac-address = <&factory 4>;
mtd-mac-address-increment = <(-2)>;
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci", "wdt";
ralink,function = "gpio";
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&pcie1 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0000>;
};
};
&xhci {
status = "disabled";
};

View File

@ -685,6 +685,17 @@ define Device/xzwifi_creativebox-v1
endef endef
TARGET_DEVICES += xzwifi_creativebox-v1 TARGET_DEVICES += xzwifi_creativebox-v1
define Device/ap-mtkh7-0006
DTS := AP-MTKH7-0006
IMAGE_SIZE := $(ralink_default_fw_size_32M)
SUPPORTED_DEVICES := sge,ap-mtkh7-0006
DEVICE_TITLE := SGE AP-MTKH7-0006
DEVICE_PACKAGES := \
kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 \
kmod-usb3 kmod-usb-ledtrig-usbport wpad-mini
endef
TARGET_DEVICES += ap-mtkh7-0006
define Device/youhua_wr1200js define Device/youhua_wr1200js
MTK_SOC := mt7621 MTK_SOC := mt7621
IMAGE_SIZE := 16064k IMAGE_SIZE := 16064k

View File

@ -91,6 +91,8 @@ CONFIG_GPIOLIB=y
CONFIG_GPIO_MT7621=y CONFIG_GPIO_MT7621=y
# CONFIG_GPIO_RALINK is not set # CONFIG_GPIO_RALINK is not set
CONFIG_GPIO_SYSFS=y CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_WATCHDOG=y
CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
# CONFIG_GRO_CELLS is not set # CONFIG_GRO_CELLS is not set
CONFIG_HANDLE_DOMAIN_IRQ=y CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDWARE_WATCHPOINTS=y CONFIG_HARDWARE_WATCHPOINTS=y