ath79: add support for TP-Link RE455 v1
TP-Link RE455 v1 is a dual band router/range-extender based on
Qualcomm/Atheros QCA9563 + QCA9880.
This device is nearly identical to RE450 v3
Specification:
- 775 MHz CPU
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 3T3R 5 GHz
- 1x 10/100/1000 Mbps Ethernet (AR8033 PHY)
- 7x LED, 4x button
- UART header on PCB[1]
Flash instruction:
Apply factory image in OEM firmware web-gui.
[1] Didn't work, probably need to short unpopulated resistor R64
and R69 as RE450v3
Signed-off-by: Roberto Valentini <valantin89@gmail.com>
This commit is contained in:
Roberto Valentini
Adrian Schmutzler
parent
0c721434ea
commit
af56075a8f
52
target/linux/ath79/dts/qca9563_tplink_re455-v1.dts
Normal file
52
target/linux/ath79/dts/qca9563_tplink_re455-v1.dts
Normal file
@ -0,0 +1,52 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qca9563_tplink_re450.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "tplink,re455-v1", "qca,qca9563";
|
||||
model = "TP-Link RE455 v1";
|
||||
};
|
||||
|
||||
&partitions {
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
info: partition@20000 {
|
||||
label = "info";
|
||||
reg = <0x020000 0x002000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@22000 {
|
||||
label = "partition-table";
|
||||
reg = <0x022000 0x002000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@24000 {
|
||||
label = "info2";
|
||||
reg = <0x024000 0x00a000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@2e000 {
|
||||
label = "config";
|
||||
reg = <0x02e000 0x022000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "tplink,firmware";
|
||||
label = "firmware";
|
||||
reg = <0x050000 0x7a0000>;
|
||||
};
|
||||
|
||||
art: partition@7f0000 {
|
||||
label = "art";
|
||||
reg = <0x7f0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
@ -352,7 +352,8 @@ tplink,tl-wr902ac-v1)
|
||||
tplink,re355-v1|\
|
||||
tplink,re450-v1|\
|
||||
tplink,re450-v2|\
|
||||
tplink,re450-v3)
|
||||
tplink,re450-v3|\
|
||||
tplink,re455-v1)
|
||||
ucidef_set_led_netdev "lan_data" "LAN Data" "green:lan_data" "eth0" "tx rx"
|
||||
ucidef_set_led_netdev "lan_link" "LAN Link" "green:lan_link" "eth0" "link"
|
||||
;;
|
||||
|
||||
@ -70,6 +70,7 @@ ath79_setup_interfaces()
|
||||
tplink,re450-v1|\
|
||||
tplink,re450-v2|\
|
||||
tplink,re450-v3|\
|
||||
tplink,re455-v1|\
|
||||
tplink,tl-wr902ac-v1|\
|
||||
ubnt,bullet-ac|\
|
||||
ubnt,bullet-m-ar7240|\
|
||||
|
||||
@ -141,7 +141,8 @@ case "$FIRMWARE" in
|
||||
;;
|
||||
tplink,eap245-v1|\
|
||||
tplink,re450-v2|\
|
||||
tplink,re450-v3)
|
||||
tplink,re450-v3|\
|
||||
tplink,re455-v1)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
|
||||
;;
|
||||
|
||||
@ -486,6 +486,18 @@ define Device/tplink_re450-v3
|
||||
endef
|
||||
TARGET_DEVICES += tplink_re450-v3
|
||||
|
||||
define Device/tplink_re455-v1
|
||||
$(Device/tplink-safeloader)
|
||||
SOC := qca9563
|
||||
IMAGE_SIZE := 7808k
|
||||
DEVICE_MODEL := RE455
|
||||
DEVICE_VARIANT := v1
|
||||
DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
|
||||
TPLINK_BOARD_ID := RE455-V1
|
||||
LOADER_TYPE := elf
|
||||
endef
|
||||
TARGET_DEVICES += tplink_re455-v1
|
||||
|
||||
define Device/tplink_tl-mr6400-v1
|
||||
$(Device/tplink-8mlzma)
|
||||
SOC := qca9531
|
||||
|
||||
@ -2431,6 +2431,46 @@ static struct device_info boards[] = {
|
||||
.last_sysupgrade_partition = "file-system"
|
||||
},
|
||||
|
||||
/** Firmware layout for the RE455 v1 */
|
||||
{
|
||||
.id = "RE455-V1",
|
||||
.vendor = "",
|
||||
.support_list =
|
||||
"SupportList:\r\n"
|
||||
"{product_name:RE455,product_ver:1.0.0,special_id:00000000}\r\n"
|
||||
"{product_name:RE455,product_ver:1.0.0,special_id:55530000}\r\n"
|
||||
"{product_name:RE455,product_ver:1.0.0,special_id:45550000}\r\n"
|
||||
"{product_name:RE455,product_ver:1.0.0,special_id:4A500000}\r\n"
|
||||
"{product_name:RE455,product_ver:1.0.0,special_id:43410000}\r\n"
|
||||
"{product_name:RE455,product_ver:1.0.0,special_id:41550000}\r\n"
|
||||
"{product_name:RE455,product_ver:1.0.0,special_id:41530000}\r\n"
|
||||
"{product_name:RE455,product_ver:1.0.0,special_id:4B520000}\r\n"
|
||||
"{product_name:RE455,product_ver:1.0.0,special_id:42520000}\r\n",
|
||||
.part_trail = 0x00,
|
||||
.soft_ver = NULL,
|
||||
|
||||
/* We're using a dynamic kernel/rootfs split here */
|
||||
.partitions = {
|
||||
{"fs-uboot", 0x00000, 0x20000},
|
||||
{"default-mac", 0x20000, 0x00020},
|
||||
{"pin", 0x20020, 0x00020},
|
||||
{"product-info", 0x21000, 0x01000},
|
||||
{"partition-table", 0x22000, 0x02000},
|
||||
{"soft-version", 0x24000, 0x01000},
|
||||
{"support-list", 0x25000, 0x01000},
|
||||
{"profile", 0x26000, 0x08000},
|
||||
{"user-config", 0x2e000, 0x10000},
|
||||
{"default-config", 0x3e000, 0x10000},
|
||||
{"config-info", 0x4e000, 0x00400},
|
||||
{"firmware", 0x50000, 0x7a0000},
|
||||
{"radio", 0x7f0000, 0x10000},
|
||||
{NULL, 0, 0}
|
||||
},
|
||||
|
||||
.first_sysupgrade_partition = "os-image",
|
||||
.last_sysupgrade_partition = "file-system"
|
||||
},
|
||||
|
||||
/** Firmware layout for the RE500 */
|
||||
{
|
||||
.id = "RE500-V1",
|
||||
|
||||
Loading…
Reference in New Issue
Block a user