diff --git a/target/linux/ipq806x/patches-5.4/083-ipq8064-dtsi-additions.patch b/target/linux/ipq806x/patches-5.4/083-ipq8064-dtsi-additions.patch
index cbb0231d43..ccfae25494 100644
--- a/target/linux/ipq806x/patches-5.4/083-ipq8064-dtsi-additions.patch
+++ b/target/linux/ipq806x/patches-5.4/083-ipq8064-dtsi-additions.patch
@@ -26,7 +26,7 @@
  		};
  
  		cpu1: cpu@1 {
-@@ -38,11 +50,458 @@
+@@ -38,11 +50,476 @@
  			next-level-cache = <&L2>;
  			qcom,acc = <&acc1>;
  			qcom,saw = <&saw1>;
@@ -42,19 +42,9 @@
 +			cpu-idle-states = <&CPU_SPC>;
  		};
  
- 		L2: l2-cache {
- 			compatible = "cache";
- 			cache-level = <2>;
-+			qcom,saw = <&saw_l2>;
-+		};
-+
-+		qcom,l2 {
-+			qcom,l2-rates = <384000000 1000000000 1200000000>;
-+			qcom,l2-cpufreq = <384000000 600000000 1200000000>;
-+			qcom,l2-volt = <1100000 1100000 1150000>;
-+			qcom,l2-supply = <&smb208_s1a>;
-+		};
-+
+-		L2: l2-cache {
+-			compatible = "cache";
+-			cache-level = <2>;
 +		idle-states {
 +			CPU_SPC: spc {
 +				compatible = "qcom,idle-state-spc", "arm,idle-state";
@@ -66,6 +56,31 @@
 +		};
 +	};
 +
++	opp_table_l2: opp_table_l2 {
++		compatible = "operating-points-v2";
++
++		opp-384000000 {
++			opp-hz = /bits/ 64 <384000000>;
++			opp-microvolt = <1100000>;
++			clock-latency-ns = <100000>;
++			opp-level = <0>;
++		};
++
++		opp-1000000000 {
++			opp-hz = /bits/ 64 <1000000000>;
++			opp-microvolt = <1100000>;
++			clock-latency-ns = <100000>;
++			opp-level = <1>;
++		};
++
++		opp-1200000000 {
++			opp-hz = /bits/ 64 <1200000000>;
++			opp-microvolt = <1150000>;
++			clock-latency-ns = <100000>;
++			opp-level = <2>;
++ 		};
++ 	};
++ 
 +	opp_table0: opp_table0 {
 +		compatible = "operating-points-v2-kryo-cpu";
 +		nvmem-cells = <&speedbin_efuse>;
@@ -78,6 +93,7 @@
 +			opp-microvolt-speed0-pvs3-v0 = <800000>;
 +			opp-supported-hw = <0x1>;
 +			clock-latency-ns = <100000>;
++			opp-level = <0>;
 +		};
 +
 +		opp-600000000 {
@@ -88,6 +104,7 @@
 +			opp-microvolt-speed0-pvs3-v0 = <850000>;
 +			opp-supported-hw = <0x1>;
 +			clock-latency-ns = <100000>;
++			opp-level = <1>;
 +		};
 +
 +		opp-800000000 {
@@ -98,6 +115,7 @@
 +			opp-microvolt-speed0-pvs3-v0 = <900000>;
 +			opp-supported-hw = <0x1>;
 +			clock-latency-ns = <100000>;
++			opp-level = <1>;
 +		};
 +
 +		opp-1000000000 {
@@ -108,6 +126,7 @@
 +			opp-microvolt-speed0-pvs3-v0 = <950000>;
 +			opp-supported-hw = <0x1>;
 +			clock-latency-ns = <100000>;
++			opp-level = <1>;
 +		};
 +
 +		opp-1200000000 {
@@ -118,6 +137,7 @@
 +			opp-microvolt-speed0-pvs3-v0 = <1000000>;
 +			opp-supported-hw = <0x1>;
 +			clock-latency-ns = <100000>;
++			opp-level = <1>;
 +		};
 +
 +		opp-1400000000 {
@@ -128,6 +148,7 @@
 +			opp-microvolt-speed0-pvs3-v0 = <1050000>;
 +			opp-supported-hw = <0x1>;
 +			clock-latency-ns = <100000>;
++			opp-level = <2>;
 +		};
 +	};
 +
@@ -485,7 +506,7 @@
  		};
  	};
  
-@@ -93,6 +552,15 @@
+@@ -93,6 +570,15 @@
  		};
  	};
  
@@ -501,10 +522,21 @@
  	firmware {
  		scm {
  			compatible = "qcom,scm-ipq806x", "qcom,scm";
-@@ -120,6 +588,84 @@
+@@ -120,6 +606,95 @@
  			reg-names = "lpass-lpaif";
  		};
  
++		L2: l2-cache {
++			compatible = "qcom,krait-cache", "cache";
++			cache-level = <2>;
++			qcom,saw = <&saw_l2>;
++
++			clocks = <&kraitcc 4>;
++			clock-names = "l2";
++			l2-supply = <&smb208_s1a>;
++			operating-points-v2 = <&opp_table_l2>;
++		};
++
 +		qfprom: qfprom@700000 {
 +			compatible = "qcom,qfprom", "syscon";
 +			reg = <0x700000 0x1000>;
@@ -586,7 +618,7 @@
  		qcom_pinmux: pinmux@800000 {
  			compatible = "qcom,ipq8064-pinctrl";
  			reg = <0x800000 0x4000>;
-@@ -159,6 +705,15 @@
+@@ -159,6 +734,15 @@
  				};
  			};
  
@@ -602,7 +634,7 @@
  			spi_pins: spi_pins {
  				mux {
  					pins = "gpio18", "gpio19", "gpio21";
-@@ -168,6 +723,53 @@
+@@ -168,6 +752,53 @@
  				};
  			};
  
@@ -656,7 +688,7 @@
  			leds_pins: leds_pins {
  				mux {
  					pins = "gpio7", "gpio8", "gpio9",
-@@ -229,6 +831,17 @@
+@@ -229,6 +860,17 @@
  			clock-output-names = "acpu1_aux";
  		};
  
@@ -674,7 +706,7 @@
  		saw0: regulator@2089000 {
  			compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
  			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-@@ -241,6 +854,17 @@
+@@ -241,6 +883,17 @@
  			regulator;
  		};
  
@@ -692,7 +724,7 @@
  		gsbi2: gsbi@12480000 {
  			compatible = "qcom,gsbi-v1.0.0";
  			cell-index = <2>;
-@@ -436,6 +1060,15 @@
+@@ -436,6 +1089,15 @@
  			#power-domain-cells = <1>;
  		};
  
@@ -708,7 +740,7 @@
  		tcsr: syscon@1a400000 {
  			compatible = "qcom,tcsr-ipq8064", "syscon";
  			reg = <0x1a400000 0x100>;
-@@ -448,6 +1081,95 @@
+@@ -448,6 +1110,95 @@
  			#reset-cells = <1>;
  		};
  
@@ -804,7 +836,7 @@
  		pcie0: pci@1b500000 {
  			compatible = "qcom,pcie-ipq8064";
  			reg = <0x1b500000 0x1000
-@@ -601,6 +1323,167 @@
+@@ -601,6 +1352,167 @@
  			perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
  		};
  
@@ -972,7 +1004,7 @@
  		vsdcc_fixed: vsdcc-regulator {
  			compatible = "regulator-fixed";
  			regulator-name = "SDCC Power";
-@@ -676,4 +1559,17 @@
+@@ -676,4 +1588,17 @@
  			};
  		};
  	};
diff --git a/target/linux/ipq806x/patches-5.4/851-add-gsbi1-dts.patch b/target/linux/ipq806x/patches-5.4/851-add-gsbi1-dts.patch
index f75f994904..a123189804 100644
--- a/target/linux/ipq806x/patches-5.4/851-add-gsbi1-dts.patch
+++ b/target/linux/ipq806x/patches-5.4/851-add-gsbi1-dts.patch
@@ -1,6 +1,6 @@
 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -865,6 +865,41 @@
+@@ -894,6 +894,41 @@
  			reg = <0x12100000 0x10000>;
  		};