ath79: add support for Aruba AP-105
SoC: Atheros AR7161-8C1A @ 680 MHz RAM: 128MB - 2x Etron Technology EM6AB160TSA-5G NOR: 16MB - 1x MXIC MX25L12845EMI-10G (SPI-NOR) WI1: Atheros AR9223-AC1A 802.11bgn WI2: Atheros AR9220-AC1A 802.11an ETH: Atheros AR8021-BL1E + PoE LED: Dual-Color Power/Status, Ethernet, WLAN2G and WLAN5G BTN: 1 x Reset I2C: AT97SC4303s TPM (needs driver!) CON: RS232-level 8P8C/RJ45 Console Port - 9600 Baud Factory installation: - Needs a u-boot replacement. See Wiki for information on how to do a in-circut flash with a SPI-Flasher like a CH314A or flashrom. Wiki page can be found at https://openwrt.org/toh/aruba/aruba_ap-105 - Be careful when dis- and reassembling the device to not squish any of the antenna cables in the process! - Be sure to make a full 16 MiB backup of your device before flashing the new u-boot! This is needed if you ever have interest in reverting back to stock firmware. Not working: - TPM (needs a driver) Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
This commit is contained in:
Chris Blake
Christian Lamparter
parent
2fdd02cc7c
commit
aee5c98619
@ -9,6 +9,7 @@ ath79_setup_interfaces()
|
||||
local board="$1"
|
||||
|
||||
case "$board" in
|
||||
aruba,ap-105|\
|
||||
avm,fritz300e|\
|
||||
devolo,dvl1200i|\
|
||||
devolo,dvl1750c|\
|
||||
|
||||
190
target/linux/ath79/dts/ar7161_aruba_ap-105.dts
Normal file
190
target/linux/ath79/dts/ar7161_aruba_ap-105.dts
Normal file
@ -0,0 +1,190 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "ar7100.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "aruba,ap-105", "qca,ar7161";
|
||||
model = "Aruba AP-105";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,9600";
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-boot = &power_green;
|
||||
led-failsafe = &power_red;
|
||||
led-running = &power_green;
|
||||
led-upgrade = &power_green;
|
||||
};
|
||||
|
||||
extosc: ref {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "ref";
|
||||
clock-frequency = <40000000>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
power_green: power_green {
|
||||
label = "ap-105:green:power";
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
power_red: power_red {
|
||||
label = "ap-105:red:power";
|
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
||||
panic-indicator;
|
||||
};
|
||||
|
||||
wifi_2g_red: wifi_2g_red {
|
||||
label = "ap-105:red:wlan2g";
|
||||
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wifi_5g_red: wifi_5g_red {
|
||||
label = "ap-105:red:wlan5g";
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
ath9k-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
wifi_2g_green {
|
||||
label = "ap-105:green:wlan2g";
|
||||
gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
wifi_5g_green {
|
||||
label = "ap-105:green:wlan5g";
|
||||
gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c {
|
||||
compatible = "i2c-gpio";
|
||||
|
||||
sda-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
|
||||
scl-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
|
||||
/* can be removed on 4.19 */
|
||||
gpios = <&gpio 5 GPIO_ACTIVE_LOW>,
|
||||
<&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
tpm@29 {
|
||||
compatible = "atmel,at97sc3203s";
|
||||
reg = <0x29>;
|
||||
|
||||
/* triggering it, will also kill system */
|
||||
reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
|
||||
ath9k0: wifi@0,11 { /* 2.4 GHz */
|
||||
compatible = "pci168c,0029";
|
||||
mtd-mac-address = <&hwinfo 0x1c>;
|
||||
mtd-mac-address-increment = <1>;
|
||||
reg = <0x8800 0 0 0 0>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
ath9k1: wifi@0,12 { /* 5 GHz */
|
||||
compatible = "pci168c,0029";
|
||||
mtd-mac-address = <&hwinfo 0x1c>;
|
||||
mtd-mac-address-increment = <2>;
|
||||
reg = <0x9000 0 0 0 0>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
};
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
phy-mask = <0x1>;
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
mtd-mac-address = <&hwinfo 0x1c>;
|
||||
|
||||
pll-data = <0x00110000 0x00001099 0x00991099>;
|
||||
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "firmware";
|
||||
reg = <0x40000 0xfa0000>;
|
||||
compatible = "denx,uimage";
|
||||
};
|
||||
|
||||
hwinfo: partition@fe0000 {
|
||||
label = "hwinfo";
|
||||
reg = <0xfe0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@ff0000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0xff0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -75,6 +75,14 @@ define Device/seama
|
||||
SEAMA_SIGNATURE :=
|
||||
endef
|
||||
|
||||
define Device/aruba_ap-105
|
||||
ATH_SOC := ar7161
|
||||
DEVICE_TITLE := Aruba AP-105
|
||||
IMAGE_SIZE := 16000k
|
||||
DEVICE_PACKAGES := kmod-i2c-core kmod-i2c-gpio kmod-tpm-i2c-atmel
|
||||
endef
|
||||
TARGET_DEVICES += aruba_ap-105
|
||||
|
||||
define Device/avm_fritz300e
|
||||
ATH_SOC := ar7242
|
||||
DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E
|
||||
|
||||
Loading…
Reference in New Issue
Block a user