ar71xx: add support for the TP-Link TL-WR1041N v2 board
Patch-by: Vince Huang <axishero@foxmail.com> SVN-Revision: 31608
This commit is contained in:
Gabor Juhos
parent
73383c252e
commit
ab897ab04e
@ -112,6 +112,7 @@ get_status_led() {
|
||||
tl-mr3420 | \
|
||||
tl-wa901nd | \
|
||||
tl-wa901nd-v2 | \
|
||||
tl-wr1041n-v2 | \
|
||||
tl-wr1043nd | \
|
||||
tl-wr741nd | \
|
||||
tl-wr741nd-v4 | \
|
||||
|
||||
@ -188,7 +188,8 @@ tl-wr741nd-v4)
|
||||
set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
|
||||
;;
|
||||
|
||||
tl-wr941nd)
|
||||
tl-wr941nd | \
|
||||
tl-wr1041n-v2)
|
||||
set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
|
||||
;;
|
||||
|
||||
|
||||
@ -89,6 +89,13 @@ ap113)
|
||||
ucidef_add_switch_vlan "eth0" "2" "0t 2"
|
||||
;;
|
||||
|
||||
tl-wr1041n-v2)
|
||||
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
|
||||
ucidef_add_switch "eth0" "1" "1"
|
||||
ucidef_add_switch_vlan "eth0" "1" "0t 2 3 4 5"
|
||||
ucidef_add_switch_vlan "eth0" "2" "0t 1"
|
||||
;;
|
||||
|
||||
tl-wr1043nd)
|
||||
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
|
||||
ucidef_add_switch "rtl8366rb" "1" "1"
|
||||
|
||||
@ -97,6 +97,9 @@ tplink_board_detect() {
|
||||
"094100"*)
|
||||
model="TP-Link TL-WR941N/ND"
|
||||
;;
|
||||
"104100"*)
|
||||
model="TP-Link TL-WR1041N/ND"
|
||||
;;
|
||||
"104300"*)
|
||||
model="TP-Link TL-WR1043N/ND"
|
||||
;;
|
||||
@ -274,6 +277,9 @@ ar71xx_board_detect() {
|
||||
*TEW-673GRU)
|
||||
name="tew-673gru"
|
||||
;;
|
||||
*"TL-WR1041N v2")
|
||||
name="tl-wr1041n-v2"
|
||||
;;
|
||||
*TL-WR1043ND)
|
||||
name="tl-wr1043nd"
|
||||
;;
|
||||
|
||||
@ -136,6 +136,7 @@ platform_check_image() {
|
||||
tl-wr841n-v1 | \
|
||||
tl-wr841n-v7 | \
|
||||
tl-wr941nd | \
|
||||
tl-wr1041n-v2 | \
|
||||
tl-wr1043nd | \
|
||||
tl-wr2543n)
|
||||
[ "$magic" != "0100" ] && {
|
||||
|
||||
@ -57,6 +57,7 @@ CONFIG_ATH79_MACH_TL_MR3020=y
|
||||
CONFIG_ATH79_MACH_TL_MR3X20=y
|
||||
CONFIG_ATH79_MACH_TL_WA901ND=y
|
||||
CONFIG_ATH79_MACH_TL_WA901ND_V2=y
|
||||
CONFIG_ATH79_MACH_TL_WR1041N_V2=y
|
||||
CONFIG_ATH79_MACH_TL_WR1043ND=y
|
||||
CONFIG_ATH79_MACH_TL_WR2543N=y
|
||||
CONFIG_ATH79_MACH_TL_WR703N=y
|
||||
|
||||
154
target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c
Normal file
154
target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c
Normal file
@ -0,0 +1,154 @@
|
||||
/*
|
||||
* TP-LINK TL-WR1041 v2 board support
|
||||
*
|
||||
* Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
|
||||
* Copyright (C) 2011-2012 Anan Huang <axishero@foxmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/pci.h>
|
||||
#include <linux/phy.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ath9k_platform.h>
|
||||
#include <linux/ar8216_platform.h>
|
||||
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "dev-ap9x-pci.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-spi.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "machtypes.h"
|
||||
|
||||
#define TL_WR1041NV2_GPIO_BTN_RESET 14
|
||||
#define TL_WR1041NV2_GPIO_LED_WPS 13
|
||||
#define TL_WR1041NV2_GPIO_LED_WLAN 11
|
||||
|
||||
#define TL_WR1041NV2_GPIO_LED_SYSTEM 12
|
||||
|
||||
#define TL_WR1041NV2_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||
#define TL_WR1041NV2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1041NV2_KEYS_POLL_INTERVAL)
|
||||
|
||||
#define TL_WR1041NV2_PCIE_CALDATA_OFFSET 0x5000
|
||||
|
||||
static const char *tl_wr1041nv2_part_probes[] = {
|
||||
"tp-link",
|
||||
NULL,
|
||||
};
|
||||
|
||||
static struct flash_platform_data tl_wr1041nv2_flash_data = {
|
||||
.part_probes = tl_wr1041nv2_part_probes,
|
||||
};
|
||||
|
||||
static struct gpio_led tl_wr1041nv2_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "tp-link:green:system",
|
||||
.gpio = TL_WR1041NV2_GPIO_LED_SYSTEM,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "tp-link:green:wps",
|
||||
.gpio = TL_WR1041NV2_GPIO_LED_WPS,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "tp-link:green:wlan",
|
||||
.gpio = TL_WR1041NV2_GPIO_LED_WLAN,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_keys_button tl_wr1041nv2_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "reset",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = TL_WR1041NV2_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = TL_WR1041NV2_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
|
||||
.mode = AR8327_PAD_MAC_RGMII,
|
||||
.txclk_delay_en = true,
|
||||
.rxclk_delay_en = true,
|
||||
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
|
||||
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
|
||||
};
|
||||
|
||||
static struct ar8327_platform_data db120_ar8327_data = {
|
||||
.pad0_cfg = &db120_ar8327_pad0_cfg,
|
||||
.cpuport_cfg = {
|
||||
.force_link = 1,
|
||||
.speed = AR8327_PORT_SPEED_1000,
|
||||
.duplex = 1,
|
||||
.txpause = 1,
|
||||
.rxpause = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct mdio_board_info db120_mdio0_info[] = {
|
||||
{
|
||||
.bus_id = "ag71xx-mdio.0",
|
||||
.phy_addr = 0,
|
||||
.platform_data = &db120_ar8327_data,
|
||||
},
|
||||
};
|
||||
|
||||
static void __init db120_gmac_setup(void)
|
||||
{
|
||||
void __iomem *base;
|
||||
u32 t;
|
||||
|
||||
base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
|
||||
|
||||
t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
|
||||
t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 |
|
||||
AR934X_ETH_CFG_GMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE);
|
||||
t |= AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE;
|
||||
|
||||
__raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
|
||||
|
||||
iounmap(base);
|
||||
}
|
||||
|
||||
static void __init tl_wr1041nv2_setup(void)
|
||||
{
|
||||
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
|
||||
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
|
||||
|
||||
ath79_register_m25p80(&tl_wr1041nv2_flash_data);
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1041nv2_leds_gpio),
|
||||
tl_wr1041nv2_leds_gpio);
|
||||
ath79_register_gpio_keys_polled(-1, TL_WR1041NV2_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(tl_wr1041nv2_gpio_keys),
|
||||
tl_wr1041nv2_gpio_keys);
|
||||
ath79_register_wmac(ee, mac);
|
||||
|
||||
db120_gmac_setup();
|
||||
|
||||
ath79_register_mdio(1, 0x0);
|
||||
ath79_register_mdio(0, 0x0);
|
||||
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
|
||||
|
||||
mdiobus_register_board_info(db120_mdio0_info,
|
||||
ARRAY_SIZE(db120_mdio0_info));
|
||||
|
||||
/* GMAC0 is connected to an AR8327 switch */
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
||||
ath79_eth0_data.phy_mask = BIT(0);
|
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
||||
ath79_eth0_pll_data.pll_1000 = 0x06000000;
|
||||
ath79_register_eth(0);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_TL_WR1041N_V2, "TL-WR1041N-v2",
|
||||
"TP-LINK TL-WR1041N v2", tl_wr1041nv2_setup);
|
||||
@ -0,0 +1,40 @@
|
||||
--- a/arch/mips/ath79/Kconfig
|
||||
+++ b/arch/mips/ath79/Kconfig
|
||||
@@ -451,6 +451,17 @@ config ATH79_MACH_TL_WR941ND
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
+config ATH79_MACH_TL_WR1041N_V2
|
||||
+ bool "TP-LINK TL-WR1041N v2 support"
|
||||
+ select SOC_AR934X
|
||||
+ select ATH79_DEV_AP9X_PCI if PCI
|
||||
+ select ATH79_DEV_ETH
|
||||
+ select ATH79_DEV_GPIO_BUTTONS
|
||||
+ select ATH79_DEV_LEDS_GPIO
|
||||
+ select ATH79_DEV_M25P80
|
||||
+ select ATH79_DEV_USB
|
||||
+ select ATH79_DEV_WMAC
|
||||
+
|
||||
config ATH79_MACH_TL_WR1043ND
|
||||
bool "TP-LINK TL-WR1043ND support"
|
||||
select SOC_AR913X
|
||||
--- a/arch/mips/ath79/machtypes.h
|
||||
+++ b/arch/mips/ath79/machtypes.h
|
||||
@@ -64,6 +64,7 @@ enum ath79_mach_type {
|
||||
ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */
|
||||
ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
|
||||
ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */
|
||||
+ ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */
|
||||
ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1041ND */
|
||||
ATH79_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */
|
||||
ATH79_MACH_TL_WR703N, /* TP-LINK TL-WR703N */
|
||||
--- a/arch/mips/ath79/Makefile
|
||||
+++ b/arch/mips/ath79/Makefile
|
||||
@@ -74,6 +74,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += m
|
||||
obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o
|
||||
obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
|
||||
obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o
|
||||
+obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o
|
||||
obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o
|
||||
obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o
|
||||
obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o
|
||||
Loading…
Reference in New Issue
Block a user