apm821xx: unify My Book Live Single + Duo images
By takimata: "Come to think of it, an MBL Single board boots up just fine on an MBL Duo image, and the MBL Single board identifies completely identical to the MBL Duo (Board: Apollo-3G - APM82181 Board, 2*SATA, 1*USB). I wonder if there is any downside to just using the MBL Duo firmware on a MBL Single. I wonder if the two firmwares could even be unified." <https://forum.lede-project.org/t/wd-mybook-live-duo-two-disks/16195/9> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
This commit is contained in:
Christian Lamparter
Mathias Kresin
parent
c4f09fc9f8
commit
9b47aa93c7
@ -1,189 +0,0 @@
|
||||
/*
|
||||
* Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
|
||||
* (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved.
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without
|
||||
* any warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include "apm82181.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "amcc,apollo3g";
|
||||
|
||||
aliases {
|
||||
serial0 = &UART0;
|
||||
led-boot = &status;
|
||||
led-failsafe = &status;
|
||||
led-running = &status;
|
||||
led-upgrade = &status;
|
||||
};
|
||||
};
|
||||
|
||||
&POB0 {
|
||||
ebc {
|
||||
nor_flash@0,0 {
|
||||
status = "okay";
|
||||
compatible = "amd,s29gl512n", "jedec-probe", "cfi-flash", "mtd-rom";
|
||||
bank-width = <1>;
|
||||
reg = <0x00000000 0x00000000 0x00080000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
/* Part of bootrom - Don't use it without a jump */
|
||||
label = "free";
|
||||
reg = <0x00000000 0x0001e000>;
|
||||
};
|
||||
|
||||
partition@1 {
|
||||
label = "env";
|
||||
reg = <0x0001e000 0x00002000>;
|
||||
};
|
||||
|
||||
partition@2 {
|
||||
label = "uboot";
|
||||
reg = <0x00020000 0x00050000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
GPIO1: gpio1@e0000000 {
|
||||
compatible = "wd,mbl-gpio", "ti,74273";
|
||||
reg-names = "dat";
|
||||
reg = <0xe0000000 0x1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
|
||||
enable-phy {
|
||||
/* toggle to reset EMAC PHY */
|
||||
gpio-hog;
|
||||
line-name = "enable EMAC PHY";
|
||||
gpios = <0 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
};
|
||||
|
||||
enable-button {
|
||||
/* Defined in u-boot as: NOT_NOR
|
||||
* "enables features other than NOR
|
||||
* specifically, the buffer at CS2"
|
||||
* (button).
|
||||
*
|
||||
* Note: This option is disabled as
|
||||
* it prevents the system from being
|
||||
* rebooted successfully.
|
||||
*/
|
||||
|
||||
gpio-hog;
|
||||
line-name = "Enable Reset Button, disable NOR";
|
||||
gpios = <1 GPIO_ACTIVE_HIGH>;
|
||||
output-low;
|
||||
};
|
||||
|
||||
enable-usb {
|
||||
gpio-hog;
|
||||
line-name = "Power USB Core";
|
||||
gpios = <2 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
enable-port1 {
|
||||
gpio-hog;
|
||||
line-name = "Power Drive Port 1";
|
||||
gpios = <3 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
};
|
||||
|
||||
enable-port0 {
|
||||
gpio-hog;
|
||||
line-name = "Power Drive Port 0";
|
||||
gpios = <7 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
GPIO2: gpio2@e0100000 {
|
||||
compatible = "wd,mbl-gpio", "ti,74244";
|
||||
reg-names = "dat";
|
||||
reg = <0xe0100000 0x1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
no-output;
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
failsafe: power-red {
|
||||
label = "mbl:red:power";
|
||||
gpios = <&GPIO1 4 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "panic";
|
||||
};
|
||||
|
||||
status: power-green {
|
||||
label = "mbl:green:power";
|
||||
gpios = <&GPIO1 5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power-blue {
|
||||
label = "mbl:blue:power";
|
||||
gpios = <&GPIO1 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys_polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <60>; /* 3 * 20 = 60ms */
|
||||
autorepeat;
|
||||
|
||||
button@1 {
|
||||
label = "Reset button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&GPIO2 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&CRYPTO {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&PKA {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&TRNG {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&SATA1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&UART0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&EMAC0 {
|
||||
status = "okay";
|
||||
|
||||
phy-map = <0x2>;
|
||||
phy-address = <0x1>;
|
||||
phy-handle = <&phy>;
|
||||
|
||||
mdio {
|
||||
phy: phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&SATA1 {
|
||||
status = "okay";
|
||||
};
|
||||
@ -1,38 +0,0 @@
|
||||
/*
|
||||
* Device Tree Source for AMCC Canyonlands (460EX)
|
||||
*
|
||||
* Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
|
||||
* (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved.
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without
|
||||
* any warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "apollo3g.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "wd,mybooklive-duo", "amcc,apollo3g";
|
||||
model = "MyBook Live Duo";
|
||||
};
|
||||
|
||||
&SATA0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&USBOTG0 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&GPIO1 {
|
||||
enable-usb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
enable-port0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
@ -9,9 +9,190 @@
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "apollo3g.dtsi"
|
||||
#include "apm82181.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "wd,mybooklive", "amcc,apollo3g";
|
||||
model = "MyBook Live";
|
||||
|
||||
aliases {
|
||||
serial0 = &UART0;
|
||||
led-boot = &status;
|
||||
led-failsafe = &status;
|
||||
led-running = &status;
|
||||
led-upgrade = &status;
|
||||
};
|
||||
};
|
||||
|
||||
&POB0 {
|
||||
ebc {
|
||||
nor_flash@0,0 {
|
||||
status = "okay";
|
||||
compatible = "amd,s29gl512n", "jedec-probe", "cfi-flash", "mtd-rom";
|
||||
bank-width = <1>;
|
||||
reg = <0x00000000 0x00000000 0x00080000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
/* Part of bootrom - Don't use it without a jump */
|
||||
label = "free";
|
||||
reg = <0x00000000 0x0001e000>;
|
||||
};
|
||||
|
||||
partition@1 {
|
||||
label = "env";
|
||||
reg = <0x0001e000 0x00002000>;
|
||||
};
|
||||
|
||||
partition@2 {
|
||||
label = "uboot";
|
||||
reg = <0x00020000 0x00050000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
GPIO1: gpio1@e0000000 {
|
||||
compatible = "wd,mbl-gpio", "ti,74273";
|
||||
reg-names = "dat";
|
||||
reg = <0xe0000000 0x1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
|
||||
enable-phy {
|
||||
/* toggle to reset EMAC PHY */
|
||||
gpio-hog;
|
||||
line-name = "enable EMAC PHY";
|
||||
gpios = <0 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
};
|
||||
|
||||
enable-button {
|
||||
/* Defined in u-boot as: NOT_NOR
|
||||
* "enables features other than NOR
|
||||
* specifically, the buffer at CS2"
|
||||
* (button).
|
||||
*
|
||||
* Note: This option is disabled as
|
||||
* it prevents the system from being
|
||||
* rebooted successfully.
|
||||
*/
|
||||
|
||||
gpio-hog;
|
||||
line-name = "Enable Reset Button, disable NOR";
|
||||
gpios = <1 GPIO_ACTIVE_HIGH>;
|
||||
output-low;
|
||||
};
|
||||
|
||||
enable-usb {
|
||||
gpio-hog;
|
||||
line-name = "Power USB Core";
|
||||
gpios = <2 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
};
|
||||
|
||||
enable-port1 {
|
||||
gpio-hog;
|
||||
line-name = "Power Drive Port 1";
|
||||
gpios = <3 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
};
|
||||
|
||||
enable-port0 {
|
||||
gpio-hog;
|
||||
line-name = "Power Drive Port 0";
|
||||
gpios = <7 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
|
||||
GPIO2: gpio2@e0100000 {
|
||||
compatible = "wd,mbl-gpio", "ti,74244";
|
||||
reg-names = "dat";
|
||||
reg = <0xe0100000 0x1>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
no-output;
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
failsafe: power-red {
|
||||
label = "mbl:red:power";
|
||||
gpios = <&GPIO1 4 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "panic";
|
||||
};
|
||||
|
||||
status: power-green {
|
||||
label = "mbl:green:power";
|
||||
gpios = <&GPIO1 5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power-blue {
|
||||
label = "mbl:blue:power";
|
||||
gpios = <&GPIO1 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys_polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <60>; /* 3 * 20 = 60ms */
|
||||
autorepeat;
|
||||
|
||||
reset-button {
|
||||
label = "Reset button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&GPIO2 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&EMAC0 {
|
||||
status = "okay";
|
||||
|
||||
phy-map = <0x2>;
|
||||
phy-address = <0x1>;
|
||||
phy-handle = <&phy>;
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
phy: phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&CRYPTO {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&PKA {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&TRNG {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&SATA0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&SATA1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&UART0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&USBOTG0 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
@ -214,7 +214,11 @@ define Build/hdd-img
|
||||
./mbl_gen_hdd_img.sh $@ $@.boot $(IMAGE_ROOTFS)
|
||||
endef
|
||||
|
||||
define Device/MyBookLiveDefault
|
||||
define Device/wd_mybooklive
|
||||
DEVICE_TITLE := Western Digital My Book Live Series (Single + Duo)
|
||||
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport kmod-usb-storage kmod-fs-vfat wpad-mini
|
||||
DEVICE_DTS := wd-mybooklive
|
||||
SUPPORTED_DEVICES += mbl wd_mybooklive-duo
|
||||
IMAGE_SIZE := 48m
|
||||
BLOCKSIZE := 1k
|
||||
DTB_SIZE := 16384
|
||||
@ -228,25 +232,8 @@ define Device/MyBookLiveDefault
|
||||
IMAGE/rootfs.img.gz := boot-script | boot-img | hdd-img | gzip | append-metadata
|
||||
endef
|
||||
|
||||
define Device/wd_mybooklive
|
||||
$(Device/MyBookLiveDefault)
|
||||
DEVICE_TITLE := Western Digital My Book Live
|
||||
DEVICE_DTS := wd-mybooklive
|
||||
SUPPORTED_DEVICES += mbl
|
||||
endef
|
||||
|
||||
TARGET_DEVICES += wd_mybooklive
|
||||
|
||||
define Device/wd_mybooklive-duo
|
||||
$(Device/MyBookLiveDefault)
|
||||
DEVICE_TITLE := Western Digital My Book Live Duo
|
||||
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport kmod-usb-storage kmod-fs-vfat wpad-mini
|
||||
DEVICE_DTS := wd-mybooklive-duo
|
||||
SUPPORTED_DEVICES += mbl
|
||||
endef
|
||||
|
||||
TARGET_DEVICES += wd_mybooklive-duo
|
||||
|
||||
endif
|
||||
|
||||
$(eval $(call BuildImage))
|
||||
|
||||
Loading…
Reference in New Issue
Block a user