move comgt to trunk and add network scripts for umts compatible with the wrt54g3g

SVN-Revision: 5433
This commit is contained in:
Felix Fietkau 2006-11-04 00:21:54 +00:00
parent ab80113a68
commit 8cc785bdf6
11 changed files with 356 additions and 0 deletions

65
package/comgt/Makefile Normal file
View File

@ -0,0 +1,65 @@
#
# Copyright (C) 2006 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
# $Id$
include $(TOPDIR)/rules.mk
PKG_NAME:=comgt
PKG_VERSION:=0.3
PKG_RELEASE:=1
PKG_SOURCE:=$(PKG_NAME)$(PKG_VERSION).tgz
PKG_SOURCE_URL:=http://www.pharscape.org/3G/comgt
PKG_MD5SUM:=cd32663025ed94a0ee623a689989f3c3
PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
PKG_UNPACK:=mkdir -p $(PKG_BUILD_DIR); zcat $(DL_DIR)/$(PKG_SOURCE) | $(TAR) -C $(PKG_BUILD_DIR) $(TAR_OPTIONS)
include $(INCLUDE_DIR)/package.mk
define Package/comgt
SECTION:=utils
CATEGORY:=Utilities
TITLE:=Option/Vodafone 3G/GPRS control tool
DEPENDS:=+chat
DESCRIPTION:=\
comgt is a scripting language interpreter useful for establishing communications \\\
on serial lines and through PCMCIA modems as well as GPRS and 3G datacards.
URL:= http://www.pharscape.org/content/view/46/70/
endef
define Build/Compile
$(MAKE) -C $(PKG_BUILD_DIR) \
$(TARGET_CONFIGURE_OPTS) \
CFLAGS="$(TARGET_CFLAGS)" \
gcom
endef
define Package/comgt/install
install -d -m0755 $(1)/usr/bin
install -m0755 $(PKG_BUILD_DIR)/gcom $(1)/usr/bin/
install -d -m0755 $(1)/etc/ppp
install -m0755 ./files/3g.connect $(1)/etc/ppp/3g.connect
install -d -m0755 $(1)/etc/chatscripts
install -m0644 ./files/3g.chat $(1)/etc/chatscripts/3g.chat
install -d -m0755 $(1)/lib/network
install -m0644 ./files/3g.sh $(1)/lib/network/3g.sh
install -d -m0755 $(1)/etc/hotplug.d/button
install -m0644 ./files/3g.button $(1)/etc/hotplug.d/button/05-3g
install -d -m0755 $(1)/etc/hotplug.d/iface
install -m0644 ./files/3g.iface $(1)/etc/hotplug.d/iface/05-3g
install -d -m0755 $(1)/etc/gcom
install -m0644 ./files/setpin.gcom $(1)/etc/gcom/setpin.gcom
install -m0644 ./files/setmode.gcom $(1)/etc/gcom/setmode.gcom
install -m0644 ./files/getcardinfo.gcom $(1)/etc/gcom/getcardinfo.gcom
install -m0644 ./files/getstrength.gcom $(1)/etc/gcom/getstrength.gcom
endef
$(eval $(call BuildPackage,comgt))

View File

@ -0,0 +1,35 @@
button_action() {(
# use led for keeping track of the state
case "$(cat /proc/diag/led/3g_green)" in
1)
ifdown "$1"
ifup wan
;;
0)
ifdown wan
ifup "$1"
;;
esac
)}
[ "$ACTION" = "released" -a "$BUTTON" = "3g" ] && {
(echo /bin/true > /proc/sys/kernel/hotplug)
include /lib/network
scan_interfaces
config_cb() {
config_get TYPE "$CONFIG_SECTION" TYPE
case "$TYPE" in
interface)
config_get proto "$CONFIG_SECTION" proto
config_get button "$CONFIG_SECTION" button
case "$button" in
1|on|enabled) [ "$proto" = "3g" ] && button_action "$CONFIG_SECTION";;
esac
;;
esac
}
config_load network
(echo /sbin/hotplug > /proc/sys/kernel/hotplug)
} &

View File

@ -0,0 +1,12 @@
ABORT BUSY
ABORT 'NO CARRIER'
ABORT ERROR
REPORT CONNECT
TIMEOUT 10
"" "AT&F"
OK "ATE1"
OK 'AT+CGDCONT=1,"IP","$USE_APN"'
SAY "Calling UMTS/GPRS"
TIMEOUT 30
OK "ATD*99***1#"
CONNECT ' '

View File

@ -0,0 +1,4 @@
#!/bin/sh
. /lib/network/3g.sh
set_3g_led 1 1 1
/usr/sbin/chat -V -E -f /etc/chatscripts/3g.chat

View File

@ -0,0 +1,10 @@
include /lib/network
config_load network
scan_interfaces
config_get proto "$INTERFACE" proto
[ "$proto" = "3g" ] && {
case "$ACTION" in
ifup) set_3g_led 1 1 0;;
ifdown) set_3g_led 0 0 0;;
esac
}

89
package/comgt/files/3g.sh Normal file
View File

@ -0,0 +1,89 @@
set_3g_led() {
grep WRT54G3G /proc/diag/model >/dev/null || return 0
echo "$1" > /proc/diag/led/3g_green
echo "$2" > /proc/diag/led/3g_blue
echo "$3" > /proc/diag/led/3g_blink
}
scan_3g() {
local device
scan_ppp "$@"
config_get device "$1" device
# try to figure out the device if it's invalid
[ -n "$device" -a -e "$device" ] || {
for device in /dev/tts/2 /dev/usb/tts/0 /dev/noz0; do
[ -e "$device" ] && {
config_set "$1" device "$device"
break
}
done
}
# enable 3G with the 3G button by default
config_get button "$1" button
[ -z "$button" ] && {
config_set "$1" button 1
}
}
stop_interface_3g() {
set_3g_led 0 0 0
killall gcom >/dev/null 2>/dev/null
}
setup_interface_3g() {
local iface="$1"
local config="$2"
config_get device "$config" device
for module in slhc ppp_generic ppp_async; do
/sbin/insmod $module 2>&- >&-
done
config_get apn "$cfg" apn
config_get service "$cfg" service
config_get pincode "$cfg" pincode
config_get mtu "$cfg" mtu
set_3g_led 1 0 1
# figure out hardware specific commands for the card
if gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | grep Novatel 2>/dev/null >/dev/null; then
case "$service" in
umts_only) CODE=2;;
gprs_only) CODE=1;;
*) CODE=0;;
esac
mode="AT\$NWRAT=${CODE},2"
else
case "$service" in
umts_only) CODE=1;;
gprs_only) CODE=0;;
*) CODE=3;;
esac
mode="AT_OPSYS=${CODE}"
fi
PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
echo "$cfg(3g): Failed to set the PIN code."
set_3g_led 0 0 0
return 1
}
MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom
set_3g_led 1 0 0
start_pppd "$config" \
noaccomp \
nopcomp \
novj \
nobsdcomp \
noauth \
lock \
crtscts \
connect "USE_APN=\"$apn\" /etc/ppp/3g.connect" \
${mtu:+mtu $mtu mru $mtu} \
460800 "$device"
}

View File

@ -0,0 +1,14 @@
opengt
set com 115200n81
set comecho off
set senddelay 0.02
waitquiet 0.2 0.2
flash 0.1
:start
send "ATI^m"
get 1 "" $s
print $s
:continue
exit 0

View File

@ -0,0 +1,14 @@
opengt
set com 115200n81
set comecho off
set senddelay 0.02
waitquiet 0.2 0.2
flash 0.1
:start
send "AT+CSQ^m"
get 1 "" $s
print $s
:continue
exit 0

View File

@ -0,0 +1,26 @@
# set wwan mode from environment
opengt
set com 115200n81
set senddelay 0.02
waitquiet 1 0.2
flash 0.1
:start
print "Trying to set mode\n"
send $env("MODE")
send "^m"
waitfor 15 "OK","ERR","ERROR"
if % = 0 goto continue
if % = 1 goto modeerror
if % = 2 goto modeerror
print "Timeout setting WWAN mode!\n"
exit 1
:modeerror
print "Error setting WWAN mode!\n"
exit 1
:continue
exit 0

View File

@ -0,0 +1,55 @@
# set pin code from evnironment "$PINCODE"
opengt
set com 115200n81
set senddelay 0.05
waitquiet 3 0.5
flash 0.1
let c=0
:start
send "AT+CPIN?^m"
waitfor 15 "SIM PUK","SIM PIN","READY","ERROR","ERR"
if % = -1 goto timeout
if % = 0 goto ready
if % = 1 goto setpin
if % = 2 goto ready
if % = 3 goto checkrepeat
if % = 4 goto checkrepeat
:checkrepeat
inc c
if c>3 goto pinerror
waitquiet 12 0.5
goto start
:timeout
print "timeout checking for PIN."
exit 1
:ready
print "SIM ready\n"
goto continue
exit 0
:setpin
# check if output was "SIM PIN2", that's ok.
waitfor 1 "2"
if % = 0 goto ready
print "Trying to set PIN\n"
send "AT+CPIN=\""
send $env("PINCODE")
send "\"^m"
waitfor 20 "OK","ERR"
if % = -1 goto pinerror
if % = 0 goto continue
if % = 1 goto pinerror
:pinerror
print "Error setting PIN, check card manually\n"
exit 1
:continue
print "PIN set successfully\n"
exit 0

View File

@ -0,0 +1,32 @@
--- gcom-0.3.x/Makefile 2006-01-04 17:05:28.000000000 +0200
+++ gcom-0.3/Makefile 2006-02-26 13:02:07.000000000 +0200
@@ -20,8 +20,6 @@
#
# $Id$
#
-LIB = -L/usr/local/lib
-INC = -I/usr/local/include
EXE = /usr/local/bin
MAN = /usr/share/man/man1
CPROG = gcom
@@ -29,9 +27,6 @@
BIN = $(CPROG) $(SCRIPT)
MANP = gcom.1 sigmon.1
-CFLAGS = -c
-LDFLAGS =
-
all: $(BIN)
install:
@@ -53,8 +48,8 @@
gcom: gcom.o
- cc gcom.o $(LDFLAGS) -o gcom
+ $(CC) gcom.o $(LDFLAGS) -o gcom
gcom.o: gcom.c gcom.h
- cc gcom.c $(CFLAGS)
+ $(CC) -c $(CFLAGS) gcom.c