EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

kirkwood: remove support for kernel 4.19

Browse Source 
kirkwood has moved to DSA on 5.4, which will make kernel 4.14 and 4.19
support broken on the affected devices.
Support on kernel 5.4 seems to have been running fine for almost 2 months
on multiple devices, while support for 4.19 has never left testing state.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Pawel Dembicki <paweldembicki@gmail.com>
This commit is contained in:
Adrian Schmutzler 2020-04-28 11:58:32 +02:00
parent 0af2c44604
commit 8b373892d3
17 changed files with 0 additions and 1759 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

344
target/linux/kirkwood/config-4.19
View File

@ -1,344 +0,0 @@
CONFIG_ALIGNMENT_TRAP=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_ARCH_HAS_KCOV=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MULTIPLATFORM=y
CONFIG_ARCH_MULTI_CPU_AUTO=y
# CONFIG_ARCH_MULTI_V4 is not set
# CONFIG_ARCH_MULTI_V4T is not set
CONFIG_ARCH_MULTI_V4_V5=y
CONFIG_ARCH_MULTI_V5=y
CONFIG_ARCH_MVEBU=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_LIBATA_LEDS=y
CONFIG_ARM=y
# CONFIG_ARMADA_THERMAL is not set
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
CONFIG_ARM_HAS_SG_CHAIN=y
# CONFIG_ARM_KIRKWOOD_CPUIDLE is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
# CONFIG_ARM_MVEBU_V7_CPUIDLE is not set
CONFIG_ARM_PATCH_PHYS_VIRT=y
# CONFIG_ARM_THUMB is not set
CONFIG_ATA=y
CONFIG_ATAGS=y
CONFIG_ATA_LEDS=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_CACHE_FEROCEON_L2=y
# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMMON_CLK=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_FEROCEON=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_FEROCEON=y
# CONFIG_CPU_FEROCEON_OLD_ID is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_PM=y
CONFIG_CPU_THUMB_CAPABLE=y
CONFIG_CPU_TLB_FEROCEON=y
CONFIG_CPU_USE_DOMAINS=y
CONFIG_CRC16=y
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_SLICEBY8=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_DEV_MARVELL_CESA=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
CONFIG_DEBUG_MVEBU_UART0_ALTERNATE=y
# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
CONFIG_DEBUG_UART_8250=y
# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
CONFIG_DEBUG_UART_8250_SHIFT=2
# CONFIG_DEBUG_UART_8250_WORD is not set
CONFIG_DEBUG_UART_PHYS=0xf1012000
CONFIG_DEBUG_UART_VIRT=0xfed12000
CONFIG_DEBUG_UNCOMPRESS=y
# CONFIG_DEBUG_USER is not set
# CONFIG_DLCI is not set
CONFIG_DNOTIFY=y
CONFIG_DTC=y
# CONFIG_EARLY_PRINTK is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EXT4_FS=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_FRAME_POINTER=y
CONFIG_FS_IOMAP=y
CONFIG_FS_MBCACHE=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GLOB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_MVEBU=y
CONFIG_GPIO_SYSFS=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_UID16=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HZ_FIXED=0
CONFIG_HZ_PERIODIC=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MV64XXX=y
# CONFIG_I2C_PXA is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_JBD2=y
CONFIG_KIRKWOOD_CLK=y
CONFIG_KIRKWOOD_THERMAL=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_NETXBIG=y
CONFIG_LEDS_NS2=y
CONFIG_LIBFDT=y
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MACH_KIRKWOOD=y
CONFIG_MACH_MVEBU_ANY=y
CONFIG_MANGLE_BOOTARGS=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MEMFD_CREATE=y
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_MIGRATION=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_MVSDIO=y
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MTD_CFI is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_MARVELL is not set
CONFIG_MTD_NAND_ORION=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MV643XX_ETH=y
CONFIG_MVEBU_CLK_COMMON=y
CONFIG_MVEBU_MBUS=y
CONFIG_MVMDIO=y
# CONFIG_MVNETA is not set
# CONFIG_MVPP2 is not set
CONFIG_MVSW61XX_PHY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_KUSER_HELPERS=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NLS=y
CONFIG_NO_BOOTMEM=y
CONFIG_NVMEM=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_KOBJ=y
CONFIG_OF_MDIO=y
CONFIG_OF_NET=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_ORION_IRQCHIP=y
CONFIG_ORION_TIMER=y
CONFIG_ORION_WATCHDOG=y
CONFIG_OUTER_CACHE=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_MVEBU=y
# CONFIG_PCI_V3_SEMI is not set
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
CONFIG_PHY_MVEBU_SATA=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_KIRKWOOD=y
CONFIG_PINCTRL_MVEBU=y
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PLAT_ORION=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
# CONFIG_POWER_RESET_QNAP is not set
CONFIG_POWER_SUPPLY=y
CONFIG_RATIONAL=y
CONFIG_REFCOUNT_FULL=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_SPI=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_MV=y
CONFIG_RTC_I2C_AND_SPI=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_SATA_MV=y
CONFIG_SATA_PMP=y
CONFIG_SCSI=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_MVEBU_UART is not set
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SGL_ALLOC=y
CONFIG_SG_POOL=y
CONFIG_SOC_BUS=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
# CONFIG_SPI_ARMADA_3700 is not set
CONFIG_SPI_MASTER=y
CONFIG_SPI_ORION=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_SRAM=y
CONFIG_SRAM_EXEC=y
CONFIG_SRCU=y
CONFIG_SWCONFIG=y
CONFIG_SWPHY=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_OF=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_TINY_SRCU=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_USB=y
CONFIG_USB_COMMON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_ORION=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
CONFIG_USB_LED_TRIG=y
# CONFIG_USB_ROLE_SWITCH is not set
CONFIG_USB_STORAGE=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
# CONFIG_VFP is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_WAN=y
CONFIG_WATCHDOG_CORE=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y

135
target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-goflexhome.dts
View File

@ -1,135 +0,0 @@
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Seagate GoFlex Home";
compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
aliases {
led-boot = &led_health;
led-failsafe = &led_fault;
led-running = &led_health;
led-upgrade = &led_fault;
};
memory@0 {
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
stdout-path = &uart0;
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_usb_power_enable: pmx-usb-power-enable {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_led_white: pmx-led-white {
marvell,pins = "mpp40";
marvell,function = "gpio";
};
pmx_led_green: pmx-led_green {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_led_orange: pmx-led-orange {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
};
serial@12000 {
status = "okay";
};
sata@80000 {
status = "okay";
nr-ports = <2>;
};
};
gpio-leds {
compatible = "gpio-leds";
led_health: health {
label = "status:green:health";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_fault: fault {
label = "status:orange:fault";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
misc {
label = "status:white:misc";
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
linux,default-trigger = "disk-activity";
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_usb_power_enable>;
pinctrl-names = "default";
usb_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "USB Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
};
};
&nand {
status = "okay";
chip-delay = <40>;
partition@0 {
label = "u-boot";
reg = <0x0000000 0x0100000>;
read-only;
};
partition@100000 {
label = "ubi";
reg = <0x0100000 0xff00000>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};

207
target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-linksys-audi.dts
View File

@ -1,207 +0,0 @@
// SPDX-License-Identifier: GPL-2.0
/*
* kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
*
* (c) 2013 Jonas Gorski <jogo@openwrt.org>
* (c) 2013 Deutsche Telekom Innovation Laboratories
* (c) 2014 Luka Perkov <luka@openwrt.org>
* (c) 2014 Dan Walters <dan@walters.io>
*
*/
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6282.dtsi"
/ {
model = "Linksys Audi (EA3500)";
compatible = "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
memory@0 {
device_type = "memory";
reg = <0x00000000 0x4000000>;
};
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&pmx_btn_wps &pmx_btn_reset>;
pinctrl-names = "default";
wps {
label = "WPS Button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_led_green_power>;
pinctrl-names = "default";
led_power: power {
label = "audi:green:power";
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
mvsw61xx {
compatible = "marvell,88e6171";
status = "okay";
reg = <0x10>;
mii-bus = <&mdio>;
cpu-port-0 = <5>;
cpu-port-1 = <6>;
is-indirect;
};
};
&pinctrl {
pmx_led_green_power: pmx-led-green-power {
marvell,pins = "mpp7";
marvell,function = "gpo";
};
pmx_btn_wps: pmx-btn-wps {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
pmx_btn_reset: pmx-btn-reset {
marvell,pins = "mpp48";
marvell,function = "gpio";
};
};
&nand {
status = "okay";
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "u_env";
reg = <0x80000 0x4000>;
};
partition@84000 {
label = "s_env";
reg = <0x84000 0x4000>;
};
partition@200000 {
label = "kernel1";
reg = <0x200000 0x290000>;
};
partition@490000 {
label = "rootfs1";
reg = <0x490000 0x1170000>;
};
partition@1600000 {
label = "kernel2";
reg = <0x1600000 0x290000>;
};
partition@1890000 {
label = "rootfs2";
reg = <0x1890000 0x1170000>;
};
partition@2a00000 {
label = "syscfg";
reg = <0x2a00000 0x1600000>;
};
partition@88000 {
label = "unused";
reg = <0x88000 0x178000>;
};
};
};
&pciec {
status = "okay";
};
&pcie0 {
status = "okay";
};
&pcie1 {
status = "okay";
};
&mdio {
status = "okay";
};
&uart0 {
status = "okay";
};
/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
* fixed speed and duplex.
*/
&eth0 {
status = "okay";
ethernet0-port@0 {
speed = <1000>;
duplex = <1>;
};
};
/* eth1 is connected to the switch at port 6. However DSA only supports a
* single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
*/
&eth1 {
status = "okay";
ethernet1-port@0 {
speed = <1000>;
duplex = <1>;
};
};
/* There is no battery on the board, so the RTC does not keep
* time when there is no power, making it useless.
*/
&rtc {
status = "disabled";
};

141
target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-nsa310b.dts
View File

@ -1,141 +0,0 @@
/dts-v1/;
#include "kirkwood-nsa3x0-common.dtsi"
/*
* There are at least two different NSA310 designs. This variant has
* a red/green USB Led (same as nsa310) and a lm85 temp/fan controller.
*/
/ {
model = "ZyXEL NSA310b";
compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
aliases {
led-boot = &led_green_sys;
led-failsafe = &led_red_sys;
led-running = &led_green_sys;
led-upgrade = &led_red_sys;
};
memory@0 {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200";
stdout-path = &uart0;
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pinctrl-names = "default";
pmx_led_esata_green: pmx-led-esata-green {
marvell,pins = "mpp12";
marvell,function = "gpio";
};
pmx_led_esata_red: pmx-led-esata-red {
marvell,pins = "mpp13";
marvell,function = "gpio";
};
pmx_led_usb_green: pmx-led-usb-green {
marvell,pins = "mpp15";
marvell,function = "gpio";
};
pmx_led_usb_red: pmx-led-usb-red {
marvell,pins = "mpp16";
marvell,function = "gpio";
};
pmx_led_sys_green: pmx-led-sys-green {
marvell,pins = "mpp28";
marvell,function = "gpio";
};
pmx_led_sys_red: pmx-led-sys-red {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_led_hdd_green: pmx-led-hdd-green {
marvell,pins = "mpp41";
marvell,function = "gpio";
};
pmx_led_hdd_red: pmx-led-hdd-red {
marvell,pins = "mpp42";
marvell,function = "gpio";
};
};
i2c@11000 {
status = "okay";
lm85: lm85@2e {
compatible = "national,lm85";
reg = <0x2e>;
};
};
};
gpio-leds {
compatible = "gpio-leds";
led_green_sys: green-sys {
label = "nsa310:green:sys";
gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
led_red_sys: red-sys {
label = "nsa310:red:sys";
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
green-hdd {
label = "nsa310:green:hdd";
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
};
red-hdd {
label = "nsa310:red:hdd";
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
green-esata {
label = "nsa310:green:esata";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
red-esata {
label = "nsa310:red:esata";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
green-usb {
label = "nsa310:green:usb";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
red-usb {
label = "nsa310:red:usb";
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
};
green-copy {
label = "nsa310:green:copy";
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
};
red-copy {
label = "nsa310:red:copy";
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
};
};

165
target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-on100.dts
View File

@ -1,165 +0,0 @@
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6282.dtsi"
/ {
model = "Cisco Systems ON100";
compatible = "cisco,on100", "marvell,kirkwood-88f6282", "marvell,kirkwood";
memory@0 {
device_type = "memory";
reg = <0x00000000 0x20000000>;
};
aliases {
led-boot = &led_health_green;
led-failsafe = &led_health_red;
led-running = &led_health_green;
led-upgrade = &led_health_red;
serial0 = &uart0;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = "serial0:115200n8";
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&pmx_btn_reset>;
pinctrl-names = "default";
reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_led_health_red &pmx_led_health_green>;
pinctrl-names = "default";
led_health_green: health-green {
label = "on100:green:health";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_health_red: health-red {
label = "on100:red:health";
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
};
health2-green {
label = "on100:green:health2";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
health2-red {
label = "on100:red:health2";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
phy-connection-type = "rgmii-id";
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
phy-connection-type = "rgmii-id";
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
/* Marvell 88E1121R */
compatible = "ethernet-phy-id0141.0cb0",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
};
ethphy1: ethernet-phy@1 {
/* Marvell 88E1121R */
compatible = "ethernet-phy-id0141.0cb0",
"ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
&nand {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x00000000 0x000a0000>;
read-only;
};
partition@a0000 {
label = "u-boot environment";
reg = <0x000a0000 0x00020000>;
read-only;
};
partition@c0000 {
label = "kernel";
reg = <0x000c0000 0x00540000>;
};
partition@600000 {
label = "ubi";
reg = <0x00600000 0x1fa00000>;
};
};
&pinctrl {
pmx_led_health_red: pmx-led-health-red {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
pmx_led_health_green: pmx-led-health-green {
marvell,pins = "mpp44";
marvell,function = "gpio";
};
pmx_led_health2_red: pmx-led-health2-red {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
pmx_led_health2_green: pmx-led-health2-green {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_btn_reset: pmx-btn-reset {
marvell,pins = "mpp31";
marvell,function = "gpio";
};
};
&sdio {
status = "okay";
};
&uart0 {
status = "okay";
};

53
target/linux/kirkwood/patches-4.19/100-ib62x0.patch
View File

@ -1,53 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -6,7 +6,14 @@
/ {
model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
- compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ compatible = "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ aliases {
+ led-boot = &led_green_os;
+ led-failsafe = &led_red_os;
+ led-running = &led_green_os;
+ led-upgrade = &led_red_os;
+ };
memory {
device_type = "memory";
@@ -81,12 +88,12 @@
&pmx_led_usb_transfer>;
pinctrl-names = "default";
- green-os {
+ led_green_os: green-os {
label = "ib62x0:green:os";
gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
+ default-state = "on";
};
- red-os {
+ led_red_os: red-os {
label = "ib62x0:red:os";
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
};
@@ -118,13 +125,13 @@
};
partition@100000 {
- label = "uImage";
- reg = <0x0100000 0x600000>;
+ label = "second stage u-boot";
+ reg = <0x100000 0x200000>;
};
- partition@700000 {
- label = "root";
- reg = <0x0700000 0xf900000>;
+ partition@200000 {
+ label = "ubi";
+ reg = <0x200000 0xfe00000>;
};
};

80
target/linux/kirkwood/patches-4.19/101-iconnect.patch
View File

@ -1,80 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -8,6 +8,13 @@
model = "Iomega Iconnect";
compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ aliases {
+ led-boot = &led_power_blue;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_blue;
+ led-upgrade = &led_power_red;
+ };
+
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
@@ -16,8 +23,6 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
- linux,initrd-start = <0x4500040>;
- linux,initrd-end = <0x4800000>;
};
ocp@f1000000 {
@@ -89,12 +94,12 @@
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- power-blue {
+ led_power_blue: power-blue {
label = "power:blue";
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
+ default-state = "on";
};
- power-red {
+ led_power_red: power-red {
label = "power:red";
gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
@@ -146,28 +151,23 @@
status = "okay";
partition@0 {
- label = "uboot";
- reg = <0x0000000 0xc0000>;
+ label = "u-boot";
+ reg = <0x0000000 0xe0000>;
};
- partition@a0000 {
- label = "env";
- reg = <0xa0000 0x20000>;
+ partition@e0000 {
+ label = "u-boot environment";
+ reg = <0xe0000 0x100000>;
};
partition@100000 {
- label = "zImage";
- reg = <0x100000 0x300000>;
- };
-
- partition@540000 {
- label = "initrd";
- reg = <0x540000 0x300000>;
+ label = "second stage u-boot";
+ reg = <0x100000 0x200000>;
};
- partition@980000 {
- label = "boot";
- reg = <0x980000 0x1f400000>;
+ partition@200000 {
+ label = "ubi";
+ reg = <0x200000 0x1fe00000>;
};
};

62
target/linux/kirkwood/patches-4.19/102-dockstar.patch
View File

@ -1,62 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
@@ -8,6 +8,13 @@
model = "Seagate FreeAgent Dockstar";
compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ aliases {
+ led-boot = &led_health;
+ led-failsafe = &led_fault;
+ led-running = &led_health;
+ led-upgrade = &led_fault;
+ };
+
memory {
device_type = "memory";
reg = <0x00000000 0x8000000>;
@@ -42,12 +49,12 @@
pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
pinctrl-names = "default";
- health {
+ led_health: health {
label = "status:green:health";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- default-state = "keep";
+ default-state = "on";
};
- fault {
+ led_fault: fault {
label = "status:orange:fault";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
@@ -78,18 +85,22 @@
partition@0 {
label = "u-boot";
- reg = <0x0000000 0x100000>;
- read-only;
+ reg = <0x0000000 0xe0000>;
+ };
+
+ partition@e0000 {
+ label = "u-boot environment";
+ reg = <0xe0000 0x100000>;
};
partition@100000 {
- label = "uImage";
- reg = <0x0100000 0x400000>;
+ label = "second stage u-boot";
+ reg = <0x100000 0x200000>;
};
- partition@500000 {
- label = "data";
- reg = <0x0500000 0xfb00000>;
+ partition@200000 {
+ label = "ubi";
+ reg = <0x200000 0xfe00000>;
};
};

67
target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch
View File

@ -1,67 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -8,6 +8,13 @@
model = "Iomega StorCenter ix2-200";
compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_health;
+ led-running = &led_power;
+ led-upgrade = &led_health;
+ };
+
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
@@ -127,16 +134,16 @@
&pmx_led_rebuild &pmx_led_health >;
pinctrl-names = "default";
- power_led {
+ led_power: power_led {
label = "status:white:power_led";
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
+ default-state = "on";
};
rebuild_led {
label = "status:white:rebuild_led";
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
};
- health_led {
+ led_health: health_led {
label = "status:red:health_led";
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
};
@@ -186,18 +193,18 @@
};
partition@a0000 {
- label = "env";
+ label = "u-boot environment";
reg = <0xa0000 0x20000>;
read-only;
};
partition@100000 {
- label = "uImage";
+ label = "kernel";
reg = <0x100000 0x300000>;
};
partition@400000 {
- label = "rootfs";
+ label = "ubi";
reg = <0x400000 0x1C00000>;
};
};
@@ -211,7 +218,7 @@
};
&eth0 {
- status = "okay";
+ status = "disabled";
ethernet0-port@0 {
speed = <1000>;
duplex = <1>;

144
target/linux/kirkwood/patches-4.19/105-ea4500.patch
View File

@ -1,144 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
@@ -24,6 +24,10 @@
};
aliases {
+ led-boot = &led_white_health;
+ led-failsafe = &led_white_health;
+ led-running = &led_white_health;
+ led-upgrade = &led_white_health;
serial0 = &uart0;
};
@@ -56,9 +60,10 @@
pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
pinctrl-names = "default";
- white-health {
+ led_white_health: white-health {
label = "viper:white:health";
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
white-pulse {
@@ -67,9 +72,18 @@
};
};
- dsa {
- status = "disabled";
+ mvsw61xx {
+ compatible = "marvell,88e6171";
+ status = "okay";
+ reg = <0x10>;
+
+ mii-bus = <&mdio>;
+ cpu-port-0 = <5>;
+ cpu-port-1 = <6>;
+ is-indirect;
+ };
+ dsa {
compatible = "marvell,dsa";
#address-cells = <2>;
#size-cells = <0>;
@@ -161,22 +175,22 @@
};
partition@200000 {
- label = "kernel";
+ label = "kernel1";
reg = <0x200000 0x2A0000>;
};
partition@4a0000 {
- label = "rootfs";
+ label = "rootfs1";
reg = <0x4A0000 0x1760000>;
};
partition@1c00000 {
- label = "alt_kernel";
+ label = "kernel2";
reg = <0x1C00000 0x2A0000>;
};
partition@1ea0000 {
- label = "alt_rootfs";
+ label = "rootfs2";
reg = <0x1EA0000 0x1760000>;
};
@@ -207,53 +221,6 @@
&mdio {
status = "okay";
-
- switch@10 {
- compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <16>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- label = "ethernet1";
- };
-
- port@1 {
- reg = <1>;
- label = "ethernet2";
- };
-
- port@2 {
- reg = <2>;
- label = "ethernet3";
- };
-
- port@3 {
- reg = <3>;
- label = "ethernet4";
- };
-
- port@4 {
- reg = <4>;
- label = "internet";
- };
-
- port@5 {
- reg = <5>;
- label = "cpu";
- ethernet = <&eth0port>;
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
- };
};
&uart0 {
@@ -272,10 +239,14 @@
};
/* eth1 is connected to the switch at port 6. However DSA only supports a
- * single CPU port. So leave this port disabled to avoid confusion.
+ * single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
*/
&eth1 {
- status = "disabled";
+ status = "okay";
+ ethernet1-port@0 {
+ speed = <1000>;
+ duplex = <1>;
+ };
};
/* There is no battery on the board, so the RTC does not keep

53
target/linux/kirkwood/patches-4.19/106-goflexnet.patch
View File

@ -1,53 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -8,6 +8,13 @@
model = "Seagate GoFlex Net";
compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ aliases {
+ led-boot = &led_health;
+ led-failsafe = &led_fault;
+ led-running = &led_health;
+ led-upgrade = &led_fault;
+ };
+
memory {
device_type = "memory";
reg = <0x00000000 0x8000000>;
@@ -85,12 +92,12 @@
>;
pinctrl-names = "default";
- health {
+ led_health: health {
label = "status:green:health";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- default-state = "keep";
+ default-state = "on";
};
- fault {
+ led_fault: fault {
label = "status:orange:fault";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
@@ -159,18 +166,8 @@
};
partition@100000 {
- label = "uImage";
- reg = <0x0100000 0x400000>;
- };
-
- partition@500000 {
- label = "pogoplug";
- reg = <0x0500000 0x2000000>;
- };
-
- partition@2500000 {
- label = "root";
- reg = <0x02500000 0xd800000>;
+ label = "ubi";
+ reg = <0x0100000 0x0ff00000>;
};
};

48
target/linux/kirkwood/patches-4.19/107-01-zyxel-nsa3x0-common-nand-partitions.patch
View File

@ -1,48 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
@@ -112,40 +112,16 @@
partition@0 {
label = "uboot";
- reg = <0x0000000 0x0100000>;
+ reg = <0x0000000 0x00c0000>;
read-only;
};
partition@100000 {
label = "uboot_env";
- reg = <0x0100000 0x0080000>;
+ reg = <0x00c0000 0x0080000>;
};
- partition@180000 {
- label = "key_store";
- reg = <0x0180000 0x0080000>;
- };
- partition@200000 {
- label = "info";
- reg = <0x0200000 0x0080000>;
- };
- partition@280000 {
- label = "etc";
- reg = <0x0280000 0x0a00000>;
- };
- partition@c80000 {
- label = "kernel_1";
- reg = <0x0c80000 0x0a00000>;
- };
- partition@1680000 {
- label = "rootfs1";
- reg = <0x1680000 0x2fc0000>;
- };
- partition@4640000 {
- label = "kernel_2";
- reg = <0x4640000 0x0a00000>;
- };
- partition@5040000 {
- label = "rootfs2";
- reg = <0x5040000 0x2fc0000>;
+ partition@140000 {
+ label = "ubi";
+ reg = <0x0140000 0x7ec0000>;
};
};

31
target/linux/kirkwood/patches-4.19/107-03-nsa325.patch
View File

@ -1,31 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-nsa325.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
@@ -15,6 +15,13 @@
model = "ZyXEL NSA325";
compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+ aliases {
+ led-boot = &led_green_sys;
+ led-failsafe = &led_orange_sys;
+ led-running = &led_green_sys;
+ led-upgrade = &led_orange_sys;
+ };
+
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>;
@@ -162,11 +169,12 @@
&pmx_led_hdd1_green &pmx_led_hdd1_red>;
pinctrl-names = "default";
- green-sys {
+ led_green_sys: green-sys {
label = "nsa325:green:sys";
gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
- orange-sys {
+ led_orange_sys: orange-sys {
label = "nsa325:orange:sys";
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};

87
target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch
View File

@ -1,87 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
@@ -18,12 +18,20 @@
compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
"marvell,kirkwood";
+ aliases {
+ led-boot = &led_health;
+ led-failsafe = &led_fault;
+ led-running = &led_health;
+ led-upgrade = &led_fault;
+ };
+
memory {
device_type = "memory";
reg = <0x00000000 0x08000000>;
};
chosen {
+ bootargs = "console=ttyS0,115200";
stdout-path = "uart0:115200n8";
};
@@ -37,8 +45,8 @@
eject {
debounce-interval = <50>;
wakeup-source;
- linux,code = <KEY_EJECTCD>;
- label = "Eject Button";
+ linux,code = <KEY_RESTART>;
+ label = "Reset";
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
};
@@ -48,12 +56,12 @@
pinctrl-0 = <&pmx_led_green &pmx_led_red>;
pinctrl-names = "default";
- health {
+ led_health: health {
label = "pogoplugv4:green:health";
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
default-state = "on";
};
- fault {
+ led_fault: fault {
label = "pogoplugv4:red:fault";
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
};
@@ -137,29 +145,19 @@
#size-cells = <1>;
partition@0 {
- label = "u-boot";
- reg = <0x00000000 0x200000>;
+ label = "uboot";
+ reg = <0x00000000 0x1c0000>;
read-only;
};
- partition@200000 {
- label = "uImage";
- reg = <0x00200000 0x300000>;
- };
-
- partition@500000 {
- label = "uImage2";
- reg = <0x00500000 0x300000>;
- };
-
- partition@800000 {
- label = "failsafe";
- reg = <0x00800000 0x800000>;
+ partition@1c0000 {
+ label = "uboot_env";
+ reg = <0x001c0000 0x40000>;
};
- partition@1000000 {
- label = "root";
- reg = <0x01000000 0x7000000>;
+ partition@200000 {
+ label = "ubi";
+ reg = <0x00200000 0x7e00000>;
};
};
};

70
target/linux/kirkwood/patches-4.19/110-pogo_e02.patch
View File

@ -1,70 +0,0 @@
--- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts
+++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
@@ -20,6 +20,13 @@
compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
"marvell,kirkwood";
+ aliases {
+ led-boot = &led_health;
+ led-failsafe = &led_fault;
+ led-running = &led_health;
+ led-upgrade = &led_fault;
+ };
+
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
@@ -33,12 +40,12 @@
gpio-leds {
compatible = "gpio-leds";
- health {
+ led_health: health {
label = "pogo_e02:green:health";
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
- default-state = "keep";
+ default-state = "on";
};
- fault {
+ led_fault: fault {
label = "pogo_e02:orange:fault";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
@@ -95,25 +102,26 @@
status = "okay";
partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x100000>;
+ label = "uboot";
+ reg = <0x0 0xe0000>;
read-only;
};
- partition@100000 {
- label = "uImage";
- reg = <0x0100000 0x400000>;
+ partition@e0000 {
+ label = "uboot_env";
+ reg = <0xe0000 0x20000>;
};
- partition@500000 {
- label = "pogoplug";
- reg = <0x0500000 0x2000000>;
+ partition@100000 {
+ label = "second_stage_uboot";
+ reg = <0x100000 0x100000>;
};
- partition@2500000 {
- label = "root";
- reg = <0x02500000 0x5b00000>;
+ partition@200000 {
+ label = "ubi";
+ reg = <0x200000 0x7e00000>;
};
+
};
&mdio {

10
target/linux/kirkwood/patches-4.19/201-enable-sata-port-specific-led-triggers.patch
View File

@ -1,10 +0,0 @@
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -118,6 +118,7 @@ config MACH_DOVE
config MACH_KIRKWOOD
bool "Marvell Kirkwood boards"
depends on ARCH_MULTI_V5
+ select ARCH_WANT_LIBATA_LEDS
select CPU_FEROCEON
select GPIOLIB
select KIRKWOOD_CLK

62
target/linux/kirkwood/patches-4.19/202-linksys-find-active-root.patch
View File

@ -1,62 +0,0 @@
The WRT1900AC among other Linksys routers uses a dual-firmware layout.
Dynamically rename the active partition to "ubi".
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
---
--- a/drivers/mtd/ofpart.c
+++ b/drivers/mtd/ofpart.c
@@ -25,6 +25,8 @@ static bool node_has_compatible(struct d
return of_get_property(pp, "compatible", NULL);
}
+static int mangled_rootblock;
+
static int parse_fixed_partitions(struct mtd_info *master,
const struct mtd_partition **pparts,
struct mtd_part_parser_data *data)
@@ -32,6 +34,7 @@ static int parse_fixed_partitions(struct
struct mtd_partition *parts;
struct device_node *mtd_node;
struct device_node *ofpart_node;
+ const char *owrtpart = "ubi";
const char *partname;
struct device_node *pp;
int nr_parts, i, ret = 0;
@@ -110,9 +113,15 @@ static int parse_fixed_partitions(struct
parts[i].size = of_read_number(reg + a_cells, s_cells);
parts[i].of_node = pp;
- partname = of_get_property(pp, "label", &len);
- if (!partname)
- partname = of_get_property(pp, "name", &len);
+ if (mangled_rootblock && (i == mangled_rootblock)) {
+ partname = owrtpart;
+ } else {
+ partname = of_get_property(pp, "label", &len);
+
+ if (!partname)
+ partname = of_get_property(pp, "name", &len);
+ }
+
parts[i].name = partname;
if (of_get_property(pp, "read-only", &len))
@@ -219,6 +228,18 @@ static int __init ofpart_parser_init(voi
return 0;
}
+static int __init active_root(char *str)
+{
+ get_option(&str, &mangled_rootblock);
+
+ if (!mangled_rootblock)
+ return 1;
+
+ return 1;
+}
+
+__setup("mangled_rootblock=", active_root);
+
static void __exit ofpart_parser_exit(void)
{
deregister_mtd_parser(&ofpart_parser);