layerscape: add flashing manual for LS1012FRDM
LS1012FRDM is supported but there's no flashing instruction in README. This patch adds it. While at it, add a missing saveenv for MAC address setup. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [add comment about saveenv] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
parent
e12ac40552
commit
81ac2a73bc
@ -71,6 +71,16 @@ from SD card.
|
||||
|
||||
3.2 Program firmware.bin to flash
|
||||
---------------------------------
|
||||
* LS1012FRDM (QSPI flash)
|
||||
Board have only one nor flash bank. Those commands will replace stock
|
||||
bootloader and firmware. Please refer point 4 for MAC recovery.
|
||||
|
||||
=> tftp a0000000 <firmware_name>-firmware.bin
|
||||
=> sf probe 0:0
|
||||
=> sf erase 0 +$filesize
|
||||
=> sf write a0000000 0 $filesize
|
||||
=> reset
|
||||
|
||||
* LS1012ARDB (QSPI flash)
|
||||
Start up from bank1, and program firmware to bank2 with below commands.
|
||||
Switch to bank2 to start up OpenWrt.
|
||||
@ -155,6 +165,7 @@ from SD card.
|
||||
|
||||
=> setenv ethaddr 00:04:9F:04:65:4b
|
||||
=> setenv eth1addr 00:04:9F:04:65:4c
|
||||
=> saveenv
|
||||
|
||||
|
||||
5. Other references
|
||||
|
Loading…
Reference in New Issue
Block a user