ath10k-firmware: update Candela Tech firmware images

Release notes since last time:

Release notes for wave-1:

2019-04-02: Support some get/set API for eeprom rate power tables.
	    Mostly backported from 10.2

2019-04-02: Support adaptive-CCA, backported from 10.2

2019-04-02: Support adding eeprom configAddr pairs via the
            set-special API. These configAddrs can be used to change
            the default register settings for up to 12 registers.

2019-05-03: Fix tx-power settings for 2x2, 3x3 rates.
	    Original logic I put in back in 2016 set 2x2 and 3x3 lower
	    than the needed to be when using most NICs (very high
	    powered NICs would not have been affected I think, not sure
	    any of those exist though.)

	    This improves throughput for 2x2 and 3x3 devices,
	    especially when the signal is weaker.

Release notes for wave-2:

2019-04-08: When setting keys, if high bit of high value of
	    key_rsc_counter is set to 0x1, then the lower 48 bits will
	    be used as the PN value.  By default, PN is set to 1 each
	    time the key is set.

2019-04-08: Pack PN into un-used 'excretries' aka
	    'num_pkt_loss_excess_retry' high 16 bits.
	    This lets us report peer PN, but *only* if driver has
	    previously set a PN when setting key (or set-special cmd is
	    used to enable PN reporting).

	    This is done so that we know the driver is recent
            enough to deal with the PN stat reporting.

2019-04-16: Support specifying tx rate on a per-beacon packet.
	    See ath10k_wmi_op_gen_beacon_dma and
	    ath10k_convert_hw_rate_to_rate_info for API details.

	     Driver needs additional work to actually enable this
	     feature currently.

2019-04-30: Compile out tx-prefetch caching logic.
	    It is full of tricky bugs that cause tx hangs.
	    I fixed at least one, but more remain and I have wasted too
	    much time on this already.

2019-05-08: Start rate-ctrl at mcs-3 instead of mcs-5.
	    This significantly helps DHCP happen quickly, probably
	    because the initial rate being too high would take a while
	    to ramp down, especially since there are few packets sent
	    by the time DHCP needs to start.

	    This bug was triggered by me decreasing retries of 0x1e
	    (upstream default) to 0x4.  But, I think it is better to
	    start with lower initial MCS instead of always having a
	    very high retry count.

Tested on 8devices Jalapeno dev board(IPQ4019)

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [neatify]
This commit is contained in:
Robert Marko 2019-05-09 17:27:57 +02:00 committed by Christian Lamparter
parent a4dc519888
commit 61f4ceb146

View File

@ -64,92 +64,92 @@ define Download/ct-firmware-htt
URL_FILE:=$($(1)_FIRMWARE_FILE_CT_HTT)
endef
QCA988X_FIRMWARE_FILE_CT:=firmware-2-ct-full-community-22.bin.lede.007
QCA988X_FIRMWARE_FILE_CT:=firmware-2-ct-full-community-22.bin.lede.008
define Download/ath10k-firmware-qca988x-ct
$(call Download/ct-firmware,QCA988X,)
HASH:=56b8faa255d053404981fc0e2ffa8dec1aa6adfffd4e4a2af2b6ac25f131ecce
HASH:=c2407cbdaaf143c9796e654aed026f0aa70fc93a82dd1244c62e95ede894e829
endef
$(eval $(call Download,ath10k-firmware-qca988x-ct))
QCA988X_FIRMWARE_FILE_CT_HTT:=firmware-2-ct-full-htt-mgt-community-22.bin.lede.007
QCA988X_FIRMWARE_FILE_CT_HTT:=firmware-2-ct-full-htt-mgt-community-22.bin.lede.008
define Download/ath10k-firmware-qca988x-ct-htt
$(call Download/ct-firmware-htt,QCA988X,)
HASH:=f85296afae06548256167a58ecf58f11cc79aba7f96629124dc7b07611f4614f
HASH:=789c4d1c8ac5edeb43d507157944102b564cd6970c365a14b50cab08ffa4e3b5
endef
$(eval $(call Download,ath10k-firmware-qca988x-ct-htt))
QCA9887_FIRMWARE_FILE_CT:=firmware-2-ct-full-community-22.bin.lede.007
QCA9887_FIRMWARE_FILE_CT:=firmware-2-ct-full-community-22.bin.lede.008
define Download/ath10k-firmware-qca9887-ct
$(call Download/ct-firmware,QCA9887,ath10k-9887)
HASH:=d42d57ded7de4f8caf4bfd163db0910af7f0e155b11e484dbaa94c341f1e6dec
HASH:=07692a63ab9d11a65c17cc896aff89ea33b7af4e0e1e51ae100651291afe3a4d
endef
$(eval $(call Download,ath10k-firmware-qca9887-ct))
QCA9887_FIRMWARE_FILE_CT_HTT:=firmware-2-ct-full-htt-mgt-community-22.bin.lede.007
QCA9887_FIRMWARE_FILE_CT_HTT:=firmware-2-ct-full-htt-mgt-community-22.bin.lede.008
define Download/ath10k-firmware-qca9887-ct-htt
$(call Download/ct-firmware-htt,QCA9887,ath10k-9887)
HASH:=2b016a6f59520925ff9996e458c26dde3422e2d142a36e235cca7aad822ad2b6
HASH:=ef336462d4a44ab9a0d89e83064124e647a9fb4a8af8be9df5724378611d2e82
endef
$(eval $(call Download,ath10k-firmware-qca9887-ct-htt))
QCA99X0_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.007
QCA99X0_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.008
define Download/ath10k-firmware-qca99x0-ct
$(call Download/ct-firmware,QCA99X0,ath10k-10-4b)
HASH:=3dbf966fdbad9e55936fa62516e2fcca2a5952030132407f80c41d7da819c82c
HASH:=3357d7ba739512619ccd14043338cfe8e148d5d8e99343e3ccf7a2ff0d07d05f
endef
$(eval $(call Download,ath10k-firmware-qca99x0-ct))
QCA99X0_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.007
QCA99X0_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.008
define Download/ath10k-firmware-qca99x0-ct-htt
$(call Download/ct-firmware-htt,QCA99X0,ath10k-10-4b)
HASH:=c98993f541fbe02e88dfd3d5ed70bbaaad228776da29260348c5b00966682b69
HASH:=ce81e1b9b80b30263e9d5010e38fac3f005214fd955dc2cff95e7fe633796212
endef
$(eval $(call Download,ath10k-firmware-qca99x0-ct-htt))
QCA9984_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.007
QCA9984_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.008
define Download/ath10k-firmware-qca9984-ct
$(call Download/ct-firmware,QCA9984,ath10k-9984-10-4b)
HASH:=1bdb2f62fb7f6947db992f0dc48b2864b51c7544ff8672a6c7570ecf2273054c
HASH:=e2794ce577ff7942dc5f767a77fa52167f323bc8f50f04570fc5efe92ed761cf
endef
$(eval $(call Download,ath10k-firmware-qca9984-ct))
QCA9984_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.007
QCA9984_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.008
define Download/ath10k-firmware-qca9984-ct-htt
$(call Download/ct-firmware-htt,QCA9984,ath10k-9984-10-4b)
HASH:=ff4c4f734711d4ead8a8ed226c5347073a9ce32b60b91d995f197b6e7809b7c6
HASH:=1f90555963c2e52ac8fc5581b2a0f9c658e3f5205844898bdc48c78d009bb6eb
endef
$(eval $(call Download,ath10k-firmware-qca9984-ct-htt))
QCA4019_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.007
QCA4019_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.008
define Download/ath10k-firmware-qca4019-ct
$(call Download/ct-firmware,QCA4019,ath10k-4019-10-4b)
HASH:=98568845cf82dea679b1f4dee23f3d3eb39755c6bcdaeb89ed188e52e0f42b2d
HASH:=4e73cf8e24e83df87d6dce2038e350b3f67753ccca37a8c0d1b861818991e6aa
endef
$(eval $(call Download,ath10k-firmware-qca4019-ct))
QCA4019_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.007
QCA4019_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.008
define Download/ath10k-firmware-qca4019-ct-htt
$(call Download/ct-firmware-htt,QCA4019,ath10k-4019-10-4b)
HASH:=b791820962e26ba186d2310c024dd16c5ec44bfbbaf40bfeb77ab30bb297e75f
HASH:=8f6434856d6f0207bc3f519cf50d2bf45df1bfcbc69b864ed02fcb5cd5ef6f4b
endef
$(eval $(call Download,ath10k-firmware-qca4019-ct-htt))
QCA9888_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.007
QCA9888_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-12.bin-lede.008
define Download/ath10k-firmware-qca9888-ct
$(call Download/ct-firmware,QCA9888,ath10k-9888-10-4b)
HASH:=f96e5d62c9b5d79cad0b0ff702cdd2644c408bcaeb1bd23f340f0425a002c8cd
HASH:=6b627746f88c1bfecb872e72c61d6097192e389592e391630d2661b44f13b10d
endef
$(eval $(call Download,ath10k-firmware-qca9888-ct))
QCA9888_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.007
QCA9888_FIRMWARE_FILE_CT_HTT:=firmware-5-ct-full-htt-mgt-community-12.bin-lede.008
define Download/ath10k-firmware-qca9888-ct-htt
$(call Download/ct-firmware-htt,QCA9888,ath10k-9888-10-4b)
HASH:=1f6d872f29d1635df55737458fc054adc64803638b4ad220ce0ccb13be5c0010
HASH:=4ef46b2bdd3ddc894f79da2dbf90ee04cb58781f3eb193840bd5fdb8624b447b
endef
$(eval $(call Download,ath10k-firmware-qca9888-ct-htt))