comgt-ncm: Add support for specifying profile index

Add support for specifying a call profile index instead of APN. A specific index different from 1 must be used for some service provider and modem combinations. In addition, change the manufacturer detection to use the standard AT+CGMI command, which produces more predictable output than ATI, remove the redundant ipv6 option, since it is less ambiguous to directly specify the PDP context type with mobile connections, and fix missing device during teardown when using ncm through the wwan proto. Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
2016-12-11 17:28:52 +02:00 · 2016-12-11 17:28:52 +02:00 · 5bd3b9dfc0
commit 5bd3b9dfc0
parent 2e2748b053
4 changed files with 51 additions and 56 deletions
--- a/package/network/utils/comgt/Makefile
+++ b/package/network/utils/comgt/Makefile
@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk

 PKG_NAME:=comgt
 PKG_VERSION:=0.32
-PKG_RELEASE:=27
+PKG_RELEASE:=28

 PKG_SOURCE:=$(PKG_NAME).$(PKG_VERSION).tgz
 PKG_SOURCE_URL:=@SF/comgt
--- a/package/network/utils/comgt/files/getcardinfo.gcom
+++ b/package/network/utils/comgt/files/getcardinfo.gcom
@ -6,7 +6,7 @@ opengt
 flash 0.1

 :start
- send "ATI^m"
+ send "AT+CGMI^m"
 get 1 "" $s
 print $s

--- a/package/network/utils/comgt/files/ncm.json
+++ b/package/network/utils/comgt/files/ncm.json
@ -7,7 +7,7 @@
 			"ATV1",
 			"ATE1",
 			"ATS0=0",
-			"AT+CGDCONT=1,\\\"${pdptype}\\\",\\\"${apn}\\\""
+			"AT+CGDCONT=${profile},\\\"${pdptype}\\\"${apn:+,\\\"$apn\\\"}"
 		],
 		"modes": {
 			"preferlte": "AT^SYSCFGEX=\\\"030201\\\",3fffffff,2,4,7fffffffffffffff,,",
@ -17,8 +17,8 @@
 			"gsm": "AT^SYSCFGEX=\\\"01\\\",3fffffff,2,4,7fffffffffffffff,,",
 			"auto": "AT^SYSCFGEX=\\\"00\\\",3fffffff,2,4,7fffffffffffffff,,"
 		},
-		"connect": "AT^NDISDUP=1,1,\\\"${apn}\\\"${username:+,\\\"$username\\\"}${password:+,\\\"$password\\\"}${auth:+,$auth}",
-		"disconnect": "AT^NDISDUP=1,0"
+		"connect": "AT^NDISDUP=${profile},1${apn:+,\\\"$apn\\\"}${username:+,\\\"$username\\\"}${password:+,\\\"$password\\\"}${auth:+,$auth}",
+		"disconnect": "AT^NDISDUP=${profile},0"
 	},
 	"samsung": {
 		"initialize": [
@ -26,7 +26,7 @@
 			"AT+CGREG=2",
 			"AT+CFUN=5",
 			"AT+MODESELECT=3",
-			"AT+CGDCONT=1,\\\"${pdptype}\\\",\\\"${apn}\\\""
+			"AT+CGDCONT=${profile},\\\"${pdptype}\\\"${apn:+,\\\"$apn\\\"}"
 		],
 		"modes": {
 			"umts": "AT+CHANGEALLPATH=1"
@ -34,11 +34,11 @@
 		"connect": "AT+CGATT=1",
 		"disconnect": "AT+CGATT=0"
 	},
-	"sierra wireless, incorporated": {
+	"sierra": {
 		"initialize": [
 			"AT+CFUN=1",
-			"AT+CGDCONT=1,\\\"${pdptype}\\\",\\\"${apn}\\\"",
-			"AT$QCPDPP=1${auth:+,$auth}${password:+,\\\"$password\\\"}${username:+,\\\"$username\\\"}"
+			"AT+CGDCONT=${profile},\\\"${pdptype}\\\"${apn:+,\\\"$apn\\\"}",
+			"AT$QCPDPP=${profile},${auth:-0}${password:+,\\\"$password\\\"}${username:+,\\\"$username\\\"}"
 		],
 		"modes": {
 			"preferlte": "AT!SELRAT=07",
@ -48,20 +48,20 @@
 			"gsm": "AT!SELRAT=02",
 			"auto": "AT!SELRAT=00"
 		},
-		"connect": "AT!SCACT=1,1",
-		"disconnect": "AT!SCACT=0,1"
+		"connect": "AT!SCACT=1,${profile}",
+		"disconnect": "AT!SCACT=0,${profile}"
 	},
-	"sony ericsson": {
+	"sony": {
 		"initialize": [
 			"AT+CFUN=1",
-			"AT+CGDCONT=1,\\\"${pdptype}\\\",\\\"${apn}\\\"",
-			"AT*EIAAUW=1,1,\\\"${username}\\\",\\\"${password}\\\",${auth:-00111}"
+			"AT+CGDCONT=${profile},\\\"${pdptype}\\\"${apn:+,\\\"$apn\\\"}",
+			"AT*EIAAUW=${profile},1,\\\"${username}\\\",\\\"${password}\\\",${auth:-00111}"
 		],
 		"modes": {
 			"umts": "AT+CFUN=6",
 			"gsm": "AT+CFUN=5"
 		},
-		"connect": "AT*ENAP=1,1",
+		"connect": "AT*ENAP=1,${profile}",
 		"disconnect": "AT*ENAP=0"
 	}
 }
--- a/package/network/utils/comgt/files/ncm.sh
+++ b/package/network/utils/comgt/files/ncm.sh
@ -18,7 +18,7 @@ proto_ncm_init_config() {
 	proto_config_add_string delay
 	proto_config_add_string mode
 	proto_config_add_string pdptype
-	proto_config_add_boolean ipv6
+	proto_config_add_int profile
 	proto_config_add_defaults
 }

@ -27,22 +27,15 @@ proto_ncm_setup() {

 	local manufacturer initialize setmode connect ifname devname devpath

-	local device apn auth username password pincode delay mode pdptype ipv6 $PROTO_DEFAULT_OPTIONS
-	json_get_vars device apn auth username password pincode delay mode pdptype ipv6 $PROTO_DEFAULT_OPTIONS
-	
-	if [ "$ipv6" = 0 ]; then
-		ipv6=""
-	else
-		ipv6=1
-	fi
-	
-	[ -z "$pdptype" ] && {
-		if [ -n "$ipv6" ]; then
-			pdptype="IPV4V6"
-		else
-			pdptype="IP"
-		fi
-	}
+	local device apn auth username password pincode delay mode pdptype profile $PROTO_DEFAULT_OPTIONS
+	json_get_vars device apn auth username password pincode delay mode pdptype profile $PROTO_DEFAULT_OPTIONS
+
+	[ "$metric" = "" ] && metric="0"
+
+	[ -n "$profile" ] || profile=1
+
+	pdptype=`echo "$pdptype" | awk '{print toupper($0)}'`
+	[ "$pdptype" = "IP" -o "$pdptype" = "IPV6" -o "$pdptype" = "IPV4V6" ] || $pdptype="IP"

 	[ -n "$ctl_device" ] && device=$ctl_device

@ -57,11 +50,6 @@ proto_ncm_setup() {
 		proto_set_available "$interface" 0
 		return 1
 	}
-	[ -n "$apn" ] || {
-		echo "No APN specified"
-		proto_notify_error "$interface" NO_APN
-		return 1
-	}

 	devname="$(basename "$device")"
 	case "$devname" in
@ -83,7 +71,7 @@ proto_ncm_setup() {

 	[ -n "$delay" ] && sleep "$delay"

-	manufacturer=`gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk '/Manufacturer/ { print tolower($2) }'`
+	manufacturer=`gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk 'NF && $0 !~ /AT\+CGMI/ { sub(/\+CGMI: /,""); print tolower($1); exit; }'`
 	[ $? -ne 0 ] && {
 		echo "Failed to get modem information"
 		proto_notify_error "$interface" GETINFO_FAILED
@ -126,6 +114,7 @@ proto_ncm_setup() {
 		json_select ..
 	}

+	echo "Starting network $interface"
 	json_get_vars connect
 	eval COMMAND="$connect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
 		echo "Failed to connect"
@ -133,19 +122,24 @@ proto_ncm_setup() {
 		return 1
 	}

-	echo "Connected, starting DHCP on $ifname"
+	echo "Setting up $ifname"
 	
 	proto_init_update "$ifname" 1
+	proto_add_data
+	json_add_string "manufacturer" "$manufacturer"
+	proto_close_data
 	proto_send_update "$interface"

-	json_init
-	json_add_string name "${interface}_4"
-	json_add_string ifname "@$interface"
-	json_add_string proto "dhcp"
-	proto_add_dynamic_defaults
-	ubus call network add_dynamic "$(json_dump)"
+	[ "$pdptype" = "IP" -o "$pdptype" = "IPV4V6" ] && {
+		json_init
+		json_add_string name "${interface}_4"
+		json_add_string ifname "@$interface"
+		json_add_string proto "dhcp"
+		proto_add_dynamic_defaults
+		ubus call network add_dynamic "$(json_dump)"
+	}

-	[ -n "$ipv6" ] && {
+	[ "$pdptype" = "IPV6" -o "$pdptype" = "IPV4V6" ] && {
 		json_init
 		json_add_string name "${interface}_6"
 		json_add_string ifname "@$interface"
@ -161,17 +155,18 @@ proto_ncm_teardown() {

 	local manufacturer disconnect

-	local device
-	json_get_vars device
+	local device profile
+	json_get_vars device profile

-	echo "Stopping network"
+	[ -n "$ctl_device" ] && device=$ctl_device

-	manufacturer=`gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk '/Manufacturer/ { print tolower($2) }'`
-	[ $? -ne 0 ] && {
-		echo "Failed to get modem information"
-		proto_notify_error "$interface" GETINFO_FAILED
-		return 1
-	}
+	[ -n "$profile" ] || profile=1
+
+	echo "Stopping network $interface"
+
+	json_load "$(ubus call network.interface.$interface status)"
+	json_select data
+	json_get_vars manufacturer

 	json_load "$(cat /etc/gcom/ncm.json)"
 	json_select "$manufacturer" || {
@ -181,7 +176,7 @@ proto_ncm_teardown() {
 	}

 	json_get_vars disconnect
-	COMMAND="$disconnect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+	eval COMMAND="$disconnect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
 		echo "Failed to disconnect"
 		proto_notify_error "$interface" DISCONNECT_FAILED
 		return 1