EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

ipq806x: fixes for R7800 and C2600

Browse Source 
Updating spi pins configuration in R7800 and C2600 DTs
Adding more usb power pin export and gsbi6 in R7800 DT
Updating and fixing leds

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
This commit is contained in:
Pavel Kubelun 2016-11-08 08:49:07 +03:00 committed by John Crispin
parent 3ac5eb9141
commit 5aace5a5fb
4 changed files with 115 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
target/linux/ipq806x/base-files/etc/board.d/01_leds
View File

@ -15,7 +15,7 @@ c2600)
ucidef_set_led_usbport "usb1" "USB 1" "${board}:white:usb_2" "usb1-port1" "usb2-port1"
ucidef_set_led_usbport "usb2" "USB 2" "${board}:white:usb_4" "usb3-port1" "usb4-port1"
ucidef_set_led_netdev "wan" "WAN" "${board}:white:wan" "eth0"
ucidef_set_led_netdev "lan" "LAN" "${board}:white:lan" "br-lan"
ucidef_set_led_netdev "lan" "LAN" "${board}:white:lan" "eth1"
ucidef_set_led_default "general" "general" "${board}:white:ledgnr" "1"
;;
d7800 |\
@ -29,8 +29,8 @@ r7500v2)
ucidef_set_led_default "rfkill" "rfkill" "${board}:white:rfkill" "0"
;;
r7800)
ucidef_set_led_usbdev "usb1" "USB 1" "${board}:white:usb1" "2-1"
ucidef_set_led_usbdev "usb2" "USB 2" "${board}:white:usb2" "4-1"
ucidef_set_led_usbport "usb1" "USB 1" "${board}:white:usb1" "usb1-port1" "usb2-port1"
ucidef_set_led_usbport "usb2" "USB 2" "${board}:white:usb2" "usb3-port1" "usb4-port1"
ucidef_set_led_netdev "wan" "WAN" "${board}:white:wan" "eth0"
ucidef_set_led_ide "esata" "eSATA" "${board}:white:esata"
ucidef_set_led_wlan "wps" "WPS" "${board}:white:wps" "phy0tpt"

28
target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
View File

@ -46,8 +46,23 @@
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
bias-none;
};
cs {
pins = "gpio20";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
@ -114,7 +129,7 @@
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
spi4: spi@1a280000 {
spi5: spi@1a280000 {
status = "ok";
spi-max-frequency = <50000000>;
@ -124,7 +139,7 @@
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
flash: m25p80@0 {
compatible = "s25fl256s1";
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
@ -380,7 +395,7 @@
wifi {
label = "wifi";
gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WLAN>;
linux,code = <KEY_RFKILL>;
};
reset {
@ -425,6 +440,11 @@
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
};
wan_red {
label = "c2600:red:wan";
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
};
wan_blue {
label = "c2600:white:wan";
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;

93
target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
View File

@ -110,15 +110,61 @@
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
bias-pull-down;
};
data {
pins = "gpio18", "gpio19";
drive-strength = <10>;
bias-none;
};
cs {
pins = "gpio20";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio21";
drive-strength = <12>;
};
};
spi6_pins: spi6_pins {
mux {
pins = "gpio55", "gpio56", "gpio58";
function = "gsbi6";
bias-pull-down;
};
mosi {
pins = "gpio55";
drive-strength = <12>;
};
miso {
pins = "gpio56";
drive-strength = <14>;
};
cs {
pins = "gpio57";
drive-strength = <12>;
bias-pull-up;
};
clk {
pins = "gpio58";
drive-strength = <12>;
};
reset {
pins = "gpio33";
drive-strength = <10>;
bias-pull-down;
output-high;
};
};
};
gsbi@16300000 {
@ -139,7 +185,7 @@
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
spi4: spi@1a280000 {
spi5: spi@1a280000 {
status = "ok";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
@ -148,10 +194,10 @@
cs-gpios = <&qcom_pinmux 20 0>;
flash: m25p80@0 {
compatible = "s25fl512s";
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <51200000>;
spi-max-frequency = <50000000>;
reg = <0>;
linux,part-probe = "qcom-smem";
@ -159,6 +205,25 @@
};
};
gsbi6: gsbi@16500000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
spi6: spi@16580000 {
status = "ok";
spi-max-frequency = <6000000>;
pinctrl-0 = <&spi6_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 57 0>;
spi-nor@0 {
compatible = "spi-nor";
reg = <0>;
spi-max-frequency = <6000000>;
};
};
};
sata-phy@1b400000 {
status = "ok";
};
@ -375,18 +440,24 @@
label = "wifi";
gpios = <&qcom_pinmux 6 1>;
linux,code = <KEY_RFKILL>;
debounce-interval = <60>;
wakeup-source;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 54 1>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
wakeup-source;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 1>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
wakeup-source;
};
};
@ -449,17 +520,23 @@
compatible = "gpio-export";
#size-cells = <0>;
display_data {
gpio-export,name = "usb0";
usb1-power {
gpio-export,name = "usb1";
gpio-export,output = <1>;
gpios = <&qcom_pinmux 15 0>;
};
display_clock {
gpio-export,name = "usb1";
usb2-power {
gpio-export,name = "usb2";
gpio-export,output = <1>;
gpios = <&qcom_pinmux 16 0>;
};
usb-power {
gpio-export,name = "usb_p";
gpio-export,output = <1>;
gpios = <&qcom_pinmux 68 0>;
};
};
};

6
target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
View File

@ -29,7 +29,7 @@
qcom,saw = <&saw0>;
clocks = <&kraitcc 0>, <&kraitcc 4>;
clock-names = "cpu", "l2";
qcom,imem = <&imem>;
qcom,imem = <&qfprom>;
clock-latency = <100000>;
cpu-supply = <&smb208_s2a>;
voltage-tolerance = <5>;
@ -49,7 +49,7 @@
qcom,saw = <&saw1>;
clocks = <&kraitcc 1>, <&kraitcc 4>;
clock-names = "cpu", "l2";
qcom,imem = <&imem>;
qcom,imem = <&qfprom>;
clock-latency = <100000>;
cpu-supply = <&smb208_s2b>;
cooling-min-state = <0>;
@ -200,7 +200,7 @@
reg-names = "lpass-lpaif";
};
imem: memory@700000 {
qfprom: qfprom@700000 {
compatible = "qcom,qfprom", "syscon";
reg = <0x00700000 0x1000>;
#address-cells = <1>;