ath79: add support for Joy-IT JT-OR750i
Specifications: * QCA9531, 16 MiB flash (Winbond W25Q128JVSQ), 128 MiB RAM * 802.11n 2T2R (external antennas) * QCA9887, 802.11ac 1T1R (connected with diplexer to one of the antennas) * 3x 10/100 LAN, 1x 10/100 WAN * UART header with pinout printed on PCB Installation: * The device comes with a bootloader installed only * The bootloader offers DHCP and is reachable at http://10.123.123.1 * Accept the agreement and flash sysupgrade.bin * Use Firefox if flashing does not work TFTP recovery with static IP: * Rename sysupgrade.bin to jt-or750i_firmware.bin * Offer it via TFTP server at 192.168.0.66 * Keep the reset button pressed for 4 seconds after connecting power TFTP recovery with dynamic IP: * Rename sysupgrade.bin to jt-or750i_firmware.bin * Offer it via TFTP server with a DHCP server running at the same address * Keep the reset button pressed for 6 seconds after connecting power Co-authored-by: Sebastian Schaper <openwrt@sebastianschaper.net> Signed-off-by: Vincent Wiemann <vincent.wiemann@ironai.com>
This commit is contained in:
parent
f1b98fa4fa
commit
55b4b36552
135
target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts
Normal file
135
target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts
Normal file
@ -0,0 +1,135 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qca953x.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "joyit,jt-or750i", "qca,qca9531";
|
||||
model = "Joy-IT JT-OR750i";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_status_green;
|
||||
led-failsafe = &led_status_red;
|
||||
led-running = &led_status_green;
|
||||
led-upgrade = &led_status_red;
|
||||
label-mac-device = ð0;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_status_green: status_green {
|
||||
label = "green:status";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
led_status_red: status_red {
|
||||
label = "red:status";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinmux {
|
||||
pinmux_led_eth_pins: pinmux_led_eth_pins {
|
||||
pinctrl-single,bits = \
|
||||
/* GPIO 4: LED_LINK_5 (WAN) */ \
|
||||
<0x04 0x0000002d 0x000000ff>, \
|
||||
/* GPIO 14: LED_LINK_2 (LAN 3) */ \
|
||||
/* GPIO 15: LED_LINK_3 (LAN 2) */ \
|
||||
<0x0c 0x2b2c0000 0xffff0000>, \
|
||||
/* GPIO 16: LED_LINK_4 (LAN 1) */ \
|
||||
<0x10 0x0000002a 0x000000ff>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "firmware";
|
||||
reg = <0x50000 0xfa0000>;
|
||||
compatible = "denx,uimage";
|
||||
};
|
||||
|
||||
art: partition@ff0000 {
|
||||
label = "art";
|
||||
reg = <0xff0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
phy-handle = <&swphy4>;
|
||||
|
||||
nvmem-cells = <&macaddr_art_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
ð1 {
|
||||
nvmem-cells = <&macaddr_art_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
};
|
||||
|
||||
&art {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_art_0: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
macaddr_art_6: macaddr@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
};
|
@ -225,6 +225,9 @@ glinet,gl-x750)
|
||||
hak5,lan-turtle)
|
||||
ucidef_set_led_netdev "wan" "WAN" "orange:system" "eth1"
|
||||
;;
|
||||
joyit,jt-or750i)
|
||||
ucidef_set_led_default "ath10k" "ath10k-disable" "ath10k-phy0" "0"
|
||||
;;
|
||||
meraki,mr12|\
|
||||
tplink,cpe210-v2|\
|
||||
tplink,cpe210-v3)
|
||||
|
@ -282,6 +282,11 @@ ath79_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
|
||||
;;
|
||||
joyit,jt-or750i)
|
||||
ucidef_set_interface_wan "eth1"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
|
||||
;;
|
||||
librerouter,librerouter-v1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "5:wan" "6@eth1" "4:lan"
|
||||
|
@ -25,6 +25,7 @@ case "$FIRMWARE" in
|
||||
comfast,cf-wr650ac-v2|\
|
||||
devolo,dlan-pro-1200plus-ac|\
|
||||
devolo,magic-2-wifi|\
|
||||
joyit,jt-or750i|\
|
||||
qxwlan,e1700ac-v2-8m|\
|
||||
qxwlan,e1700ac-v2-16m|\
|
||||
qxwlan,e600gac-v2-8m|\
|
||||
|
@ -1369,6 +1369,15 @@ define Device/jjplus_ja76pf2
|
||||
endef
|
||||
TARGET_DEVICES += jjplus_ja76pf2
|
||||
|
||||
define Device/joyit_jt-or750i
|
||||
SOC := qca9531
|
||||
DEVICE_VENDOR := Joy-IT
|
||||
DEVICE_MODEL := JT-OR750i
|
||||
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
|
||||
IMAGE_SIZE := 16000k
|
||||
endef
|
||||
TARGET_DEVICES += joyit_jt-or750i
|
||||
|
||||
define Device/librerouter_librerouter-v1
|
||||
SOC := qca9558
|
||||
DEVICE_VENDOR := Librerouter
|
||||
|
Loading…
Reference in New Issue
Block a user