From 5543d63fc84e64be83afaa4241369a07797f041b Mon Sep 17 00:00:00 2001 From: Ludwig Thomeczek Date: Tue, 12 Jun 2018 21:17:23 +0200 Subject: [PATCH] ramips: add support for Netgear R6120 This patch adds support for the Netgear R6120, aka Netgear AC1200. Specification: - SoC: MediaTek MT7628 (580 MHz) - Flash: 16 MiB - RAM: 64 MiB - Wireless: 2.4Ghz(builtin) and 5Ghz (MT7612E) - LAN speed: 10/100 - LAN ports: 4 - WAN speed: 10/100 - WAN ports: 1 - Serial baud rate of Bootloader and factory firmware: 57600 To flash use nmrpflash with the provided factory.img. Flashing via webinterface will not work, for now. Signed-off-by: Ludwig Thomeczek --- .../ramips/base-files/etc/board.d/01_leds | 5 + .../ramips/base-files/etc/board.d/02_network | 1 + .../ramips/base-files/lib/upgrade/platform.sh | 1 + target/linux/ramips/dts/R6120.dts | 145 ++++++++++++++++++ target/linux/ramips/image/mt76x8.mk | 28 ++++ 5 files changed, 180 insertions(+) create mode 100644 target/linux/ramips/dts/R6120.dts diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 0d5a2e97c2..5d833e4410 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -319,6 +319,11 @@ mzk-ex750np) na930) set_usb_led "$boardname:blue:status" ;; +netgear,r6120) + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f" + ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "phy0tpt" + ucidef_set_led_wlan "wlan5g" "WiFi 5GHz" "$boardname:green:wlan5g" "phy1tpt" + ;; newifi-d1) set_usb_led "$boardname:red:status" ;; diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 5be50f48c3..28bf815ee9 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -103,6 +103,7 @@ ramips_setup_interfaces() mzk-750dhp|\ mzk-w300nh2|\ d-team,newifi-d2|\ + netgear,r6120|\ nixcore-x1-8M|\ nixcore-x1-16M|\ oy-0001|\ diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 19662b7067..51691e30fb 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -132,6 +132,7 @@ platform_check_image() { psr-680w|\ px-4885-4M|\ px-4885-8M|\ + netgear,r6120|\ rb750gr3|\ re6500|\ rp-n53|\ diff --git a/target/linux/ramips/dts/R6120.dts b/target/linux/ramips/dts/R6120.dts new file mode 100644 index 0000000000..eac9e17688 --- /dev/null +++ b/target/linux/ramips/dts/R6120.dts @@ -0,0 +1,145 @@ +/dts-v1/; + +#include "mt7628an.dtsi" + +#include +#include + +/ { + compatible = "netgear,r6120", "mediatek,mt7628an-soc"; + model = "Netgear AC1200 R6120"; + + aliases { + led-status = &led_power; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + lan { + label = "r6120:green:lan"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + }; + + led_power: power { + label = "r6120:green:power"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "r6120:green:wlan2g"; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; + + wlan_orange { + label = "r6120:orange:wlan2g"; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + wlan5 { + label = "r6120:green:wlan5g"; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; + + wlan5_orange { + label = "r6120:orange:wlan5g"; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "p0led_an", "p1led_an", "p2led_an", + "p3led_an", "p4led_an", "wdt", "wled_an"; + ralink,function = "gpio"; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + m25p,chunked-io = <32>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x40000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x20000>; + read-only; + }; + + nvram: partition@60000 { + label = "nvram"; + reg = <0x60000 0x30000>; + read-only; + }; + + partition@90000 { + label = "firmware"; + reg = <0x90000 0xf60000>; + }; + + partition@ff0000 { + label = "reserved"; + reg = <0xff0000 0x10000>; + read-only; + }; + }; + }; +}; + +&wmac { + status = "okay"; + mtd-mac-address = <&nvram 0x100b0>; + mediatek,mtd-eeprom = <&factory 0x20000>; +}; + +ðernet { + mtd-mac-address = <&nvram 0x100b0>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x28000>; + ieee80211-freq-limit = <5000000 6000000>; + mtd-mac-address = <&nvram 0x100b0>; + mtd-mac-address-increment = <(2)>; + }; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 143944176d..eddbbea3c2 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -2,6 +2,17 @@ # MT76x8 Profiles # +DEVICE_VARS += SERCOMM_KERNEL_OFFSET SERCOMM_HWID SERCOMM_HWVER SERCOMM_SWVER + +define Build/mksercommfw + $(STAGING_DIR_HOST)/bin/mksercommfw \ + $@ \ + $(SERCOMM_KERNEL_OFFSET) \ + $(SERCOMM_HWID) \ + $(SERCOMM_HWVER) \ + $(SERCOMM_SWVER) +endef + define Device/tplink TPLINK_FLASHLAYOUT := TPLINK_HWID := @@ -91,6 +102,23 @@ define Device/mt7628 endef TARGET_DEVICES += mt7628 +define Device/netgear_r6120 + DTS := R6120 + BLOCKSIZE := 64k + IMAGE_SIZE := $(ralink_default_fw_size_16M) + DEVICE_TITLE := Netgear AC1200 R6120 + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci + SERCOMM_KERNEL_OFFSET := 90000 + SERCOMM_HWID := CGQ + SERCOMM_HWVER := A001 + SERCOMM_SWVER := 0040 + IMAGES += factory.img + IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE)| append-rootfs | pad-rootfs + IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE) + IMAGE/factory.img := $$(IMAGE/default) | mksercommfw +endef +TARGET_DEVICES += netgear_r6120 + define Device/omega2 DTS := OMEGA2 IMAGE_SIZE := $(ralink_default_fw_size_16M)