diff --git a/target/linux/ramips/patches-5.10/710-at803x.patch b/target/linux/ramips/patches-5.10/710-at803x.patch
index d15dd92965..ec8f3ba55f 100644
--- a/target/linux/ramips/patches-5.10/710-at803x.patch
+++ b/target/linux/ramips/patches-5.10/710-at803x.patch
@@ -118,7 +118,23 @@ Signed-off-by: René van Dorst <opensource@vdorst.com>
  	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
  	if (!priv)
  		return -ENOMEM;
-@@ -744,6 +818,10 @@ static int at803x_read_status(struct phy
+@@ -554,6 +628,7 @@ static int at803x_probe(struct phy_devic
+ 			return ret;
+ 	}
+ 
++#if 0
+ 	/* Some bootloaders leave the fiber page selected.
+ 	 * Switch to the copper page, as otherwise we read
+ 	 * the PHY capabilities from the fiber side.
+@@ -565,6 +640,7 @@ static int at803x_probe(struct phy_devic
+ 		if (ret)
+ 			goto err;
+ 	}
++#endif
+ 
+ 	return 0;
+ 
+@@ -744,6 +820,10 @@ static int at803x_read_status(struct phy
  {
  	int ss, err, old_link = phydev->link;
  
@@ -129,7 +145,7 @@ Signed-off-by: René van Dorst <opensource@vdorst.com>
  	/* Update the link, but return if there was an error */
  	err = genphy_update_link(phydev);
  	if (err)
-@@ -844,6 +922,12 @@ static int at803x_config_aneg(struct phy
+@@ -844,6 +924,12 @@ static int at803x_config_aneg(struct phy
  {
  	int ret;
  
@@ -142,7 +158,23 @@ Signed-off-by: René van Dorst <opensource@vdorst.com>
  	ret = at803x_config_mdix(phydev, phydev->mdix_ctrl);
  	if (ret < 0)
  		return ret;
-@@ -1145,6 +1229,7 @@ static struct phy_driver at803x_driver[]
+@@ -943,6 +1029,7 @@ static int at803x_get_features(struct ph
+ 	if (err)
+ 		return err;
+ 
++#if 0
+ 	if (!at803x_match_phy_id(phydev, ATH8031_PHY_ID))
+ 		return 0;
+ 
+@@ -960,6 +1047,7 @@ static int at803x_get_features(struct ph
+ 	 */
+ 	linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
+ 			   phydev->supported);
++#endif
+ 	return 0;
+ }
+ 
+@@ -1173,6 +1261,7 @@ static struct phy_driver at803x_driver[]
  	/* Qualcomm Atheros AR8031/AR8033 */
  	PHY_ID_MATCH_EXACT(ATH8031_PHY_ID),
  	.name			= "Qualcomm Atheros AR8031/AR8033",
diff --git a/target/linux/ramips/patches-5.4/991-at803x.patch b/target/linux/ramips/patches-5.4/991-at803x.patch
index 4de3118547..a0d9a03fcf 100644
--- a/target/linux/ramips/patches-5.4/991-at803x.patch
+++ b/target/linux/ramips/patches-5.4/991-at803x.patch
@@ -42,7 +42,7 @@ Signed-off-by: René van Dorst <opensource@vdorst.com>
  
  #define AT803X_DEBUG_REG_0			0x00
  #define AT803X_DEBUG_RX_CLK_DLY_EN		BIT(15)
-@@ -274,12 +285,73 @@ static int at803x_resume(struct phy_devi
+@@ -274,18 +285,80 @@ static int at803x_resume(struct phy_devi
  	return phy_modify(phydev, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, 0);
  }
  
@@ -116,7 +116,38 @@ Signed-off-by: René van Dorst <opensource@vdorst.com>
  	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
  	if (!priv)
  		return -ENOMEM;
-@@ -415,6 +487,10 @@ static int at803x_read_status(struct phy
+ 
+ 	phydev->priv = priv;
+ 
++#if 0
+ 	/* Some bootloaders leave the fiber page selected.
+ 	 * Switch to the copper page, as otherwise we read
+ 	 * the PHY capabilities from the fiber side.
+@@ -295,6 +368,7 @@ static int at803x_probe(struct phy_devic
+ 		ret = at803x_write_page(phydev, AT803X_PAGE_COPPER);
+ 		mutex_unlock(&phydev->mdio.bus->mdio_lock);
+ 	}
++#endif
+ 
+ 	return ret;
+ }
+@@ -419,6 +493,7 @@ static int at803x_get_features(struct ph
+ 	if (err)
+ 		return err;
+ 
++#if 0
+ 	if (!(phydev->phy_id & phydev->drv->phy_id_mask) == (ATH8031_PHY_ID & phydev->drv->phy_id_mask))
+ 		return 0;
+ 
+@@ -436,6 +511,7 @@ static int at803x_get_features(struct ph
+ 	 */
+ 	linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
+ 			   phydev->supported);
++#endif
+ 	return 0;
+ }
+ 
+@@ -443,6 +519,10 @@ static int at803x_read_status(struct phy
  {
  	int ss, err, old_link = phydev->link;
  
@@ -127,7 +158,7 @@ Signed-off-by: René van Dorst <opensource@vdorst.com>
  	/* Update the link, but return if there was an error */
  	err = genphy_update_link(phydev);
  	if (err)
-@@ -469,6 +545,19 @@ static int at803x_read_status(struct phy
+@@ -497,6 +577,19 @@ static int at803x_read_status(struct phy
  	return 0;
  }
  
@@ -147,7 +178,7 @@ Signed-off-by: René van Dorst <opensource@vdorst.com>
  static struct phy_driver at803x_driver[] = {
  {
  	/* ATHEROS 8035 */
-@@ -504,6 +593,7 @@ static struct phy_driver at803x_driver[]
+@@ -532,6 +625,7 @@ static struct phy_driver at803x_driver[]
  	/* ATHEROS 8031 */
  	.phy_id			= ATH8031_PHY_ID,
  	.name			= "Atheros 8031 ethernet",