lantiq: move common FRITZ736X bits into dtsi

Move common FRITZ736X bits into dtsi file
as a preparation for FRITZ7362SL support.

Signed-off-by: Danijel Tudek <danijel.tudek@gmail.com>

target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ7360SL.dts

@@ -1,171 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /dts-v1/;
 
-#include "vr9.dtsi"
+#include "FRITZ736X.dtsi"
 
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
 
 / {
-	compatible = "avm,fritz7360sl", "lantiq,xway", "lantiq,vr9";
+	compatible = "avm,fritz7360sl", "avm,fritz736x", "lantiq,xway", "lantiq,vr9";
 	model = "AVM FRITZ!Box 7360 SL";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-		led-upgrade = &power_green;
-
-		led-dsl = &info_green;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		reg = <0x0 0x8000000>;
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-		dect {
-			label = "dect";
-			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_PHONE>;
-		};
-		wifi {
-			label = "wifi";
-			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_WLAN>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power_green: power {
-			label = "fritz7360sl:green:power";
-			gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		power_red: power2 {
-			label = "fritz7360sl:red:power";
-			gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
-		};
-		info_red {
-			label = "fritz7360sl:red:info";
-			gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
-		};
-		info_green: info_green {
-			label = "fritz7360sl:green:info";
-			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "fritz7360sl:green:wlan";
-			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
-		};
-		dect {
-			label = "fritz7360sl:green:dect";
-			gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
-&eth0 {
+&power_green {
-	lan: interface@0 {
+	label = "fritz7360sl:green:power";
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		mtd-mac-address = <&urlader 0xa91>;
-		mtd-mac-address-increment = <(-2)>;
-		lantiq,switch;
-
-		ethernet@0 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <0>;
-			phy-mode = "rmii";
-			phy-handle = <&phy0>;
-		};
-		ethernet@1 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <1>;
-			phy-mode = "rmii";
-			phy-handle = <&phy1>;
-		};
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "gmii";
-			phy-handle = <&phy11>;
-		};
-		ethernet@3 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phy-mode = "gmii";
-			phy-handle = <&phy13>;
-		};
-	};
-
-	mdio@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-		reg = <0>;
-
-		phy0: ethernet-phy@0 {
-			reg = <0x00>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
-		};
-		phy1: ethernet-phy@1 {
-			reg = <0x01>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
-		};
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-	};
 };
 
-&gphy0 {
+&power_red {
-	lantiq,gphy-mode = <GPHY_MODE_GE>;
+	label = "fritz7360sl:red:power";
 };
 
-&gphy1 {
+&info_green {
-	lantiq,gphy-mode = <GPHY_MODE_GE>;
+	label = "fritz7360sl:green:info";
 };
 
-&gpio {
+&wifi {
-	pinctrl-names = "default";
+	label = "fritz7360sl:green:wlan";
-	pinctrl-0 = <&state_default>;
+};
 
-	state_default: pinmux {
+&info_red {
-		mdio {
+	label = "fritz7360sl:red:info";
-			lantiq,groups = "mdio";
+};
-			lantiq,function = "mdio";
+
-		};
+&dect {
-		phy-rst {
+	label = "fritz7360sl:green:dect";
-			lantiq,pins = "io37", "io44";
+};
-			lantiq,pull = <0>;
+
-			lantiq,open-drain;
+&state_default {
-			lantiq,output = <1>;
+	pcie-rst {
-		};
+		lantiq,pins = "io38";
-		pcie-rst {
+		lantiq,pull = <0>;
-			lantiq,pins = "io38";
+		lantiq,output = <1>;
-			lantiq,pull = <0>;
-			lantiq,output = <1>;
-		};
 	};
 };
 
@@ -206,35 +80,3 @@
 		};
 	};
 };
-
-&pcie0 {
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-
-		wifi@168c,002e {
-			compatible = "pci168c,002e";
-			reg = <0 0 0 0 0>;
-			qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
-		};
-	};
-};
-
-&usb_phy0 {
-	status = "okay";
-};
-
-&usb_phy1 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};

target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ736X.dtsi

@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+	compatible = "avm,fritz736x", "lantiq,xway", "lantiq,vr9";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_green;
+		led-upgrade = &power_green;
+		led-dsl = &info_green;
+		led-wifi = &wifi;
+	};
+
+	memory@0 {
+		reg = <0x0 0x8000000>;
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		dect {
+			label = "dect";
+			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_PHONE>;
+		};
+
+		wifi {
+			label = "wifi";
+			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WLAN>;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		power_green: power {
+			gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		power_red: power2 {
+			gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
+		};
+
+		info_green: info_green {
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi: wifi {
+			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+		};
+
+		info_red: info_red {
+			gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+		};
+
+		dect: dect {
+			gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&eth0 {
+	lan: interface@0 {
+		compatible = "lantiq,xrx200-pdi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		mtd-mac-address = <&urlader 0xa91>;
+		mtd-mac-address-increment = <(-2)>;
+		lantiq,switch;
+
+		ethernet@0 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <0>;
+			phy-mode = "rmii";
+			phy-handle = <&phy0>;
+		};
+
+		ethernet@1 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <1>;
+			phy-mode = "rmii";
+			phy-handle = <&phy1>;
+		};
+
+		ethernet@2 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <2>;
+			phy-mode = "gmii";
+			phy-handle = <&phy11>;
+		};
+
+		ethernet@3 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <4>;
+			phy-mode = "gmii";
+			phy-handle = <&phy13>;
+		};
+	};
+
+	mdio@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "lantiq,xrx200-mdio";
+		reg = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0x00>;
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+		};
+
+		phy1: ethernet-phy@1 {
+			reg = <0x01>;
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+		};
+
+		phy11: ethernet-phy@11 {
+			reg = <0x11>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+
+		phy13: ethernet-phy@13 {
+			reg = <0x13>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
+
+&gphy0 {
+	lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+	lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_default>;
+
+	state_default: pinmux {
+		mdio {
+			lantiq,groups = "mdio";
+			lantiq,function = "mdio";
+		};
+
+		phy-rst {
+			lantiq,pins = "io37", "io44";
+			lantiq,pull = <0>;
+			lantiq,open-drain;
+			lantiq,output = <1>;
+		};
+	};
+
+};
+
+&pcie0 {
+	status = "okay";
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <1>;
+		#address-cells = <2>;
+		device_type = "pci";
+
+		wifi@168c,002e {
+			compatible = "pci168c,002e";
+			reg = <0 0 0 0 0>;
+			qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
+		};
+	};
+};
+
+&usb_phy0 {
+	status = "okay";
+};
+
+&usb_phy1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};