ramips: add support for TP-Link TL-WR841n v14
TP-Link TL-WR841n v14 is a router based on MediaTek MT7628N. - MediaTek MT7628NN - 32 MB of RAM - 4 MB of FLASH - 2T2R 2.4 GHz - 5x 10/100 Mbps Ethernet Installation: - copy the 'openwrt-ramips-mt76x8-tl-wr841n-v14-squashfs-tftp-recovery.bin' file to your tftp server root and rename it to 'tp_recovery.bin'. - configure your PC running the TFTP server with the static IP address 192.168.0.66/24 - push the reset button and plug in the power connector. Wait until the orange led starts blinking (~6sec) Signed-off-by: Alexander Müller <donothingloop@gmail.com> Signed-off-by: Alexander Couzens <lynxis@fe80.eu> [small modifications gpio-hog]
This commit is contained in:
Alexander Müller
Alexander Couzens
parent
cc1147072d
commit
3fd97c522b
@ -326,6 +326,10 @@ tl-wr841n-v13)
|
||||
ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10"
|
||||
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
|
||||
;;
|
||||
tplink,tl-wr841n-v14)
|
||||
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
|
||||
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
|
||||
;;
|
||||
tplink,c2-v1)
|
||||
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x1e"
|
||||
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x01"
|
||||
|
||||
@ -246,6 +246,7 @@ ramips_setup_interfaces()
|
||||
tl-wr840n-v4|\
|
||||
tl-wr840n-v5|\
|
||||
tl-wr841n-v13|\
|
||||
tplink,tl-wr841n-v14|\
|
||||
u7628-01-128M-16M|\
|
||||
ubnt-erx|\
|
||||
ubnt-erx-sfp|\
|
||||
|
||||
136
target/linux/ramips/dts/TL-WR841NV14.dts
Normal file
136
target/linux/ramips/dts/TL-WR841NV14.dts
Normal file
@ -0,0 +1,136 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7628an.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "tplink,tl-wr841n-v14", "mediatek,mt7628an-soc";
|
||||
model = "TP-Link TL-WR841N v14";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_wlan;
|
||||
led-failsafe = &led_wlan;
|
||||
led-upgrade = &led_wlan;
|
||||
|
||||
led-wlan = &led_wlan;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x2000000>;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <20>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
lan {
|
||||
label = "tl-wr841n-v14:green:lan";
|
||||
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan_green {
|
||||
label = "tl-wr841n-v14:green:wan";
|
||||
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_wlan: wlan {
|
||||
label = "tl-wr841n-v14:green:wlan";
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
wan_orange {
|
||||
label = "tl-wr841n-v14:orange:wan";
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
m25p,chunked-io = <32>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "boot";
|
||||
reg = <0x0 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@10000 {
|
||||
compatible = "tplink,firmware";
|
||||
label = "firmware";
|
||||
reg = <0x10000 0x3e0000>;
|
||||
};
|
||||
|
||||
factory: partition@3f0000 {
|
||||
label = "factory";
|
||||
reg = <0x3f0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
mtd-mac-address = <&factory 0xf100>;
|
||||
mediatek,mtd-eeprom = <&factory 0x10000>;
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0xf100>;
|
||||
mediatek,portmap = "wllll";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "p4led_an", "p3led_an", "p2led_an", "p1led_an", "p0led_an", "wdt";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
led_wlan_enable {
|
||||
gpio-hog;
|
||||
gpios = <11 GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
@ -259,6 +259,20 @@ define Device/tl-wr841n-v13
|
||||
endef
|
||||
TARGET_DEVICES += tl-wr841n-v13
|
||||
|
||||
define Device/tplink_tl-wr841n-v14
|
||||
$(Device/tplink)
|
||||
DTS := TL-WR841NV14
|
||||
IMAGE_SIZE := 3968k
|
||||
DEVICE_TITLE := TP-Link TL-WR841N v14
|
||||
TPLINK_FLASHLAYOUT := 4Mmtk
|
||||
TPLINK_HWID := 0x08410014
|
||||
TPLINK_HWREV := 0x1
|
||||
TPLINK_HWREVADD := 0x14
|
||||
TPLINK_HVERSION := 3
|
||||
IMAGE/tftp-recovery.bin := pad-extra 64k | $$(IMAGE/factory.bin)
|
||||
endef
|
||||
TARGET_DEVICES += tplink_tl-wr841n-v14
|
||||
|
||||
define Device/tplink_c20-v4
|
||||
$(Device/tplink)
|
||||
DTS := ArcherC20v4
|
||||
|
||||
Loading…
Reference in New Issue
Block a user