EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

add support for LEDs on the NP28G board, thanks to kenny (closes: #2825)

Browse Source 
SVN-Revision: 9781
This commit is contained in:
Gabor Juhos 2007-12-16 19:03:40 +00:00
parent 7e83cf568a
commit 3befb653fa
2 changed files with 38 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

27
target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c
View File

@ -102,7 +102,12 @@ static void wp54_reset(void)
gpio_set_value(ADM5120_GPIO_PIN3, 0);
}
static void __init np2xg_setup(void)
static void np28g_reset(void)
{
gpio_set_value(ADM5120_GPIO_PIN4, 0);
}
static void __init np27g_setup(void)
{
gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
gpio_direction_output(ADM5120_GPIO_PIN5, 0);
@ -113,6 +118,20 @@ static void __init np2xg_setup(void)
/* TODO: setup mac address */
}
static void __init np28g_setup(void)
{
gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
gpio_direction_output(ADM5120_GPIO_PIN5, 0);
gpio_request(ADM5120_GPIO_PIN4, NULL); /* for system reset */
gpio_direction_output(ADM5120_GPIO_PIN4, 1);
/* setup data for flash0 device */
adm5120_flash0_data.switch_bank = switch_bank_gpio5;
/* TODO: setup mac address */
}
static void __init wp54_setup(void)
{
gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
@ -121,7 +140,6 @@ static void __init wp54_setup(void)
gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */
gpio_direction_output(ADM5120_GPIO_PIN3, 1);
/* setup data for flash0 device */
adm5120_flash0_data.switch_bank = switch_bank_gpio5;
@ -147,15 +165,16 @@ static void __init wp54_wrt_setup(void)
/*--------------------------------------------------------------------------*/
ADM5120_BOARD_START(NP27G, "Compex NetPassage 27G")
.board_setup = np2xg_setup,
.board_setup = np27g_setup,
.eth_num_ports = 5,
.eth_vlans = np27g_vlans,
.num_devices = ARRAY_SIZE(np2xg_devices),
.devices = np2xg_devices,
/* TODO: add PCI IRQ map */
ADM5120_BOARD_END
ADM5120_BOARD_START(NP28G, "Compex NetPassage 28G")
.board_setup = np2xg_setup,
.board_setup = np28g_setup,
.eth_num_ports = 4,
.eth_vlans = np28g_vlans,
.num_devices = ARRAY_SIZE(np2xg_devices),

31
target/linux/adm5120/files/drivers/leds/leds-adm5120.c
View File

@ -89,21 +89,20 @@ LED_ARRAY(np27g) { /* FIXME: untested */
};
#endif
#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL)
LED_ARRAY(np28g) { /* FIXME: untested */
LED_STD(ADM5120_GPIO_xxxx, "lan1", NULL),
LED_STD(ADM5120_GPIO_xxxx, "lan2", NULL),
LED_STD(ADM5120_GPIO_xxxx, "lan3", NULL),
LED_STD(ADM5120_GPIO_xxxx, "wan", NULL),
LED_STD(ADM5120_GPIO_xxxx, "wlan", NULL),
LED_STD(ADM5120_GPIO_xxxx, "usb1", NULL),
LED_STD(ADM5120_GPIO_xxxx, "usb2", NULL),
LED_STD(ADM5120_GPIO_xxxx, "usb3", NULL),
LED_STD(ADM5120_GPIO_xxxx, "usb4", NULL),
LED_INV(ADM5120_GPIO_PIN2, "power", NULL),
LED_STD(ADM5120_GPIO_xxxx, "diag", NULL),
LED_ARRAY(np28g) {
LED_INV(ADM5120_GPIO_PIN2, "diag", NULL),
LED_INV(ADM5120_GPIO_PIN3, "power", NULL),
LED_INV(ADM5120_GPIO_PIN6, "wan_cond", NULL),
LED_INV(ADM5120_GPIO_PIN7, "wifi", NULL),
LED_INV(ADM5120_GPIO_P0L2, "usb1", NULL),
LED_INV(ADM5120_GPIO_P1L0, "lan1", NULL),
LED_INV(ADM5120_GPIO_P1L2, "usb2", NULL),
LED_INV(ADM5120_GPIO_P2L0, "lan2", NULL),
LED_INV(ADM5120_GPIO_P2L2, "usb3", NULL),
LED_INV(ADM5120_GPIO_P3L0, "lan3", NULL),
LED_INV(ADM5120_GPIO_P3L2, "usb4", NULL),
LED_INV(ADM5120_GPIO_P4L0, "wan", NULL),
};
#endif
LED_ARRAY(wp54g) {
LED_INV(ADM5120_GPIO_PIN2, "diag", NULL),
@ -240,6 +239,8 @@ LED_ARRAY(generic) {
static struct mach_data machines[] __initdata = {
MACH_DATA(MACH_ADM5120_GENERIC, generic),
/* Compex */
MACH_DATA(MACH_ADM5120_NP28G, np28g),
MACH_DATA(MACH_ADM5120_NP28GHS, np28g),
MACH_DATA(MACH_ADM5120_WP54AG, wp54g),
MACH_DATA(MACH_ADM5120_WP54G, wp54g),
MACH_DATA(MACH_ADM5120_WP54G_WRT, wp54g),
@ -260,8 +261,6 @@ static struct mach_data machines[] __initdata = {
MACH_DATA(MACH_ADM5120_RB_111, rb100),
MACH_DATA(MACH_ADM5120_RB_112, rb100),
MACH_DATA(MACH_ADM5120_NP27G, np27g),
MACH_DATA(MACH_ADM5120_NP28G, np28g),
MACH_DATA(MACH_ADM5120_NP28GHS, np28g),
#endif
};