ath79: add support for ON Networks N150R

This is a rebranded Netgear WNR612v2, specs are the same.

 - Atheros AR7240 (Python) @400MHz
 - flash 4MB
 - ram 32MB
 - ethernet 10/100: 1xwan + 2xlan (only two)
 - radio AR9285

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
This commit is contained in:
Zoltan HERPAI 2018-06-20 16:21:08 +02:00 committed by John Crispin
parent 51dd8ec62f
commit 31c26cece3
5 changed files with 32 additions and 2 deletions

View File

@ -22,7 +22,8 @@ case "$board" in
ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100" "33"
ucidef_set_led_default "etactica" "etactica" "$boardname:red:etactica" "ignore"
;;
"netgear,wnr612-v2")
"netgear,wnr612-v2"|\
"on,n150r")
ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0"
ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f"
ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f"

View File

@ -33,7 +33,8 @@ ath79_setup_interfaces()
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
"netgear,wnr612-v2")
"netgear,wnr612-v2"|\
"on,n150r")
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan" "2:lan" "3:lan:3" "4:lan:4"

View File

@ -55,6 +55,7 @@ case "$FIRMWARE" in
ath9k_eeprom_extract "art" 20480 1088
;;
"netgear,wnr612-v2"|\
"on,n150r"|\
"tplink,tl-wr740n-v2"|\
"ubnt,unifi")
ath9k_eeprom_extract "art" 4096 2048

View File

@ -0,0 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_netgear_wnr612-v2.dtsi"
/ {
model = "ON Network N150R";
compatible = "on,n150r";
};

View File

@ -17,3 +17,20 @@ define Device/netgear_wnr612-v2
SUPPORTED_DEVICES := netgear,wnr612-v2 wnr612-v2
endef
TARGET_DEVICES += netgear_wnr612-v2
define Device/n150r
ATH_SOC := ar7240
DEVICE_TITLE := ON Network N150R
DEVICE_DTS := ar7240_on_n150r
NETGEAR_KERNEL_MAGIC := 0x32303631
KERNEL := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma
NETGEAR_BOARD_ID := N150R
IMAGE_SIZE := 3904k
IMAGES := sysupgrade.bin factory.img
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
SUPPORTED_DEVICES := on,n150r n150r
endef
TARGET_DEVICES += n150r