EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

ramips: enable power LED and second uart on GL-MT300N-V2

Browse Source 
The device has a second uart accessible via pin headers, so enable it.

There is also a green power led which was not enabled previously.
Enable it too and use it as status LED.

Signed-off-by: Benjamin Valentin <benjamin.valentin@volatiles.de>
This commit is contained in:
Benjamin Valentin 2018-02-20 18:39:16 +01:00 committed by Mathias Kresin
parent a464d2b960
commit 2d8eeca842
2 changed files with 12 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
target/linux/ramips/base-files/etc/diag.sh
View File

@ -191,7 +191,7 @@ get_status_led() {
status_led="$boardname:blue:wifi"
;;
gl-mt300n-v2)
status_led="$boardname:red:wlan"
status_led="$boardname:green:power"
;;
m4-4M|\
m4-8M)

12
target/linux/ramips/dts/GL-MT300N-V2.dts
View File

@ -21,6 +21,12 @@
gpio-leds {
compatible = "gpio-leds";
power {
label = "gl-mt300n-v2:green:power";
default-state = "on";
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
wan {
label = "gl-mt300n-v2:blue:wan";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
@ -73,7 +79,7 @@
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "wdt", "gpio", "wled_an", "p0led_an", "i2s";
ralink,group = "wdt", "gpio", "wled_an", "p0led_an", "p1led_an", "i2s";
ralink,function = "gpio";
};
};
@ -124,6 +130,10 @@
};
};
&uart1 {
status = "okay";
};
&ehci {
status = "okay";
};