EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

ar71xx: add support for Nokia WI2A-AC200i

Browse Source 
Specifications:
 - SoC: Qualcomm QCA9558 (720 MHz)
 - RAM: 256MB
 - Storage: 1MB NOR, 128 MB NAND flash
 - Ethernet: 1x1000M

Installation:
 1. Connect to serial console on the board
 2. Boot initramfs image over u-boot
 3. Copy image to the device and run sysupgrade

Installation without serial console is not supported at this time

Signed-off-by: Felix Fietkau <nbd@nbd.name>
This commit is contained in:
Felix Fietkau 2017-06-27 23:26:03 +02:00
parent 2af10c30fe
commit 2c9aff289e
14 changed files with 286 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
target/linux/ar71xx/base-files/etc/board.d/01_leds
View File

@ -824,6 +824,12 @@ r6100)
ucidef_set_led_usbdev "usb" "USB" "netgear:blue:usb" "1-1"
ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy1tpt"
;;
wi2a-ac200i)
ucidef_set_led_default "power" "Power (green)" "nokia:green:power" "1"
ucidef_set_led_default "wan" "Ethernet LED (green)" "nokia:green:wan" "1"
ucidef_set_led_wlan "wlan5g" "WLAN" "nokia:green:wlan-5g" "phy0tpt"
ucidef_set_led_wlan "wlan2g" "WLAN" "nokia:green:wlan-2g" "phy1tpt"
;;
wndr3700v4|\
wndr4300)
ucidef_set_led_switch "wan-green" "WAN (green)" "netgear:green:wan" "switch0" "0x20" "0x08"

1
target/linux/ar71xx/base-files/etc/board.d/02_network
View File

@ -128,6 +128,7 @@ ar71xx_setup_interfaces()
tl-wr902ac-v1|\
tube2h|\
unifiac-lite|\
wi2a-ac200i|\
wndap360|\
wp543)
ucidef_set_interface_lan "eth0"

6
target/linux/ar71xx/base-files/etc/diag.sh
View File

@ -459,6 +459,9 @@ get_status_led() {
airgatewaypro)
status_led="ubnt:white:status"
;;
wi2a-ac200i)
status_led="nokia:green:ctrl"
;;
whr-g301n|\
whr-hp-g300n|\
whr-hp-gn|\
@ -529,6 +532,9 @@ set_state() {
local n=$(fw_printenv activeregion | cut -d = -f 2)
fw_setenv "image${n}trynum" 0
;;
wi2a-ac200i)
fw_setenv PKRstCnt 0
;;
esac
;;
esac

3
target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@ -111,6 +111,9 @@ case "$FIRMWARE" in
unifiac-pro)
ath10kcal_extract "EEPROM" 20480 2116
;;
wi2a-ac200i)
ath10kcal_extract "ART" 20480 2116
;;
esac
;;
"ath10k/cal-pci-0000:01:00.0.bin")

3
target/linux/ar71xx/base-files/lib/ar71xx.sh
View File

@ -1231,6 +1231,9 @@ ar71xx_board_detect() {
"WeIO"*)
name="weio"
;;
*"WI2A-AC200i")
name="wi2a-ac200i"
;;
*"WHR-G301N")
name="whr-g301n"
;;

19
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
View File

@ -534,6 +534,7 @@ platform_check_image() {
nbg6716|\
r6100|\
rambutan|\
wi2a-ac200i|\
wndr3700v4|\
wndr4300)
nand_do_platform_check $board $1
@ -708,6 +709,7 @@ platform_pre_upgrade() {
rb-2011uias-2hnd|\
rb-sxt2n|\
rb-sxt5n|\
wi2a-ac200i|\
wndr3700v4|\
wndr4300)
nand_do_upgrade "$1"
@ -743,6 +745,23 @@ platform_nand_pre_upgrade() {
mtd erase kernel
tar xf "$1" sysupgrade-routerboard/kernel -O | nandwrite -o "$fw_mtd" -
;;
wi2a-ac200i)
case "$(fw_printenv -n dualPartition)" in
imgA)
fw_setenv dualPartition imgB
fw_setenv ActImg NokiaImageB
;;
imgB)
fw_setenv dualPartition imgA
fw_setenv ActImg NokiaImageA
;;
esac
ubiblock -r /dev/ubiblock0_0 2>/dev/null >/dev/null
rm -f /dev/ubiblock0_0
ubidetach -d 0 2>/dev/null >/dev/null
CI_UBIPART=ubi_alt
CI_KERNPART=kernel_alt
;;
esac
}

1
target/linux/ar71xx/config-4.4
View File

@ -223,6 +223,7 @@ CONFIG_ATH79_MACH_UBNT=y
CONFIG_ATH79_MACH_UBNT_UNIFIAC=y
CONFIG_ATH79_MACH_UBNT_XM=y
CONFIG_ATH79_MACH_WEIO=y
# CONFIG_ATH79_MACH_WI2A_AC200I is not set
CONFIG_ATH79_MACH_WHR_HP_G300N=y
CONFIG_ATH79_MACH_WLAE_AG300N=y
CONFIG_ATH79_MACH_WLR8100=y

1
target/linux/ar71xx/config-4.9
View File

@ -221,6 +221,7 @@ CONFIG_ATH79_MACH_UBNT=y
CONFIG_ATH79_MACH_UBNT_UNIFIAC=y
CONFIG_ATH79_MACH_UBNT_XM=y
CONFIG_ATH79_MACH_WEIO=y
# CONFIG_ATH79_MACH_WI2A_AC200I is not set
CONFIG_ATH79_MACH_WHR_HP_G300N=y
CONFIG_ATH79_MACH_WLAE_AG300N=y
CONFIG_ATH79_MACH_WLR8100=y

11
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
View File

@ -8,6 +8,17 @@ config ATH79_MACH_A60
select ATH79_DEV_WMAC
select ATH79_DEV_USB
config ATH79_MACH_WI2A_AC200I
bool "Nokia WI2A-AC200i support"
select SOC_QCA955X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_NFC
select ATH79_DEV_WMAC
select ATH79_DEV_USB
config ATH79_MACH_ALFA_AP120C
bool "ALFA Network AP120C board support"
select ATH79_DEV_AP9X_PCI if PCI

1
target/linux/ar71xx/files/arch/mips/ath79/Makefile
View File

@ -39,6 +39,7 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += routerboot.o
# Machines
#
obj-$(CONFIG_ATH79_MACH_A60) += mach-a60.o
obj-$(CONFIG_ATH79_MACH_WI2A_AC200I) += mach-wi2a-ac200i.o
obj-$(CONFIG_ATH79_MACH_ALFA_AP120C) += mach-alfa-ap120c.o
obj-$(CONFIG_ATH79_MACH_ALFA_AP96) += mach-alfa-ap96.o
obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach-alfa-nx.o

217
target/linux/ar71xx/files/arch/mips/ath79/mach-wi2a-ac200i.c Normal file
View File

@ -0,0 +1,217 @@
/*
* Nokia WI2A-AC200i support
*
* Copyright (c) 2012 Qualcomm Atheros
* Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
* Copyright (c) 2017 Felix Fietkau <nbd@nbd.name>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/platform/ar934x_nfc.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/fw/fw.h>
#include "common.h"
#include "pci.h"
#include "dev-ap9x-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-eth.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-nfc.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#define AC200I_GPIO_BTN_RESET 17
#define AC200I_KEYS_POLL_INTERVAL 20 /* msecs */
#define AC200I_KEYS_DEBOUNCE_INTERVAL (3 * AC200I_KEYS_POLL_INTERVAL)
#define AC200I_MAC_ADDR 0x1f040249
#define AC200I_MAC1_OFFSET 6
#define AC200I_WMAC_CALDATA_ADDR 0x1f061000
static struct gpio_led ac200i_leds_gpio[] __initdata = {
{
.name = "nokia:red:wlan-2g",
.gpio = 0,
.active_low = 1,
},
{
.name = "nokia:green:power",
.gpio = 1,
.active_low = 1,
},
{
.name = "nokia:green:wlan-2g",
.gpio = 2,
.active_low = 1,
},
{
.name = "nokia:green:ctrl",
.gpio = 3,
.active_low = 1,
},
{
.name = "nokia:green:eth",
.gpio = 4,
.active_low = 1,
},
{
.name = "nokia:red:power",
.gpio = 13,
.active_low = 1,
},
{
.name = "nokia:red:eth",
.gpio = 14,
.active_low = 1,
},
{
.name = "nokia:red:wlan-5g",
.gpio = 18,
.active_low = 1,
},
{
.name = "nokia:green:wlan-5g",
.gpio = 19,
.active_low = 1,
},
{
.name = "nokia:red:ctrl",
.gpio = 20,
.active_low = 1,
},
};
static struct gpio_keys_button ac200i_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = AC200I_KEYS_DEBOUNCE_INTERVAL,
.gpio = AC200I_GPIO_BTN_RESET,
.active_low = 1,
},
};
static struct mtd_partition ac200i_nand_partitions[] = {
{
.name = "cfg",
.offset = 0x0100000,
.size = 0x1800000,
.mask_flags = MTD_WRITEABLE,
},
{
.name = "kernel",
.offset = 0x2000000,
.size = 0x0400000,
},
{
.name = "ubi",
.offset = 0x2400000,
.size = 0x2000000,
},
{
.name = "kernel",
.offset = 0x5000000,
.size = 0x0400000,
},
{
.name = "ubi",
.offset = 0x5400000,
.size = 0x2000000,
},
};
static const char *boot_getenv(const char *key)
{
const char *start = (const char *) KSEG1ADDR(0x1f070000);
const char *end = start + 0x20000;
const char *addr;
for (addr = start + 4;
*addr && *addr != 0xff && addr < end &&
strnlen(addr, end - addr) < end - addr;
addr += strnlen(addr, end - addr) + 1) {
const char *val;
val = strchr(addr, '=');
if (!val)
continue;
if (strncmp(addr, key, val - addr))
continue;
return val + 1;
}
return NULL;
}
static void __init ac200i_setup(void)
{
const char *img;
u8 *wmac = (u8 *) KSEG1ADDR(AC200I_WMAC_CALDATA_ADDR);
u8 *mac_addr = (u8 *) KSEG1ADDR(AC200I_MAC_ADDR);
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(ac200i_leds_gpio),
ac200i_leds_gpio);
ath79_register_gpio_keys_polled(-1, AC200I_KEYS_POLL_INTERVAL,
ARRAY_SIZE(ac200i_gpio_keys),
ac200i_gpio_keys);
ath79_register_usb();
ath79_nfc_set_parts(ac200i_nand_partitions,
ARRAY_SIZE(ac200i_nand_partitions));
ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
ath79_register_nfc();
ath79_register_wmac(wmac, NULL);
ath79_register_mdio(0, 0x0);
ath79_init_mac(ath79_eth0_data.mac_addr, mac_addr, 0);
/* GMAC0 is connected to the SGMII interface */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
ath79_eth0_data.phy_mask = BIT(4);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_pll_data.pll_1000 = 0x03000101;
ath79_eth0_pll_data.pll_100 = 0x80000101;
ath79_eth0_pll_data.pll_10 = 0x80001313;
img = boot_getenv("dualPartition");
if (img && !strcmp(img, "imgA")) {
ac200i_nand_partitions[3].name = "kernel_alt";
ac200i_nand_partitions[4].name = "ubi_alt";
} else {
ac200i_nand_partitions[1].name = "kernel_alt";
ac200i_nand_partitions[2].name = "ubi_alt";
}
ath79_register_eth(0);
ath79_register_pci();
}
MIPS_MACHINE(ATH79_MACH_WI2A_AC200I, "WI2A-AC200i",
"Nokia WI2A-AC200i",
ac200i_setup);

1
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
View File

@ -19,6 +19,7 @@ enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
ATH79_MACH_A40, /* OpenMesh A40 */
ATH79_MACH_A60, /* OpenMesh A60 */
ATH79_MACH_WI2A_AC200I, /* Nokia WI2A-AC200i */
ATH79_MACH_ALFA_AP120C, /* ALFA Network AP120C board */
ATH79_MACH_ALFA_AP96, /* ALFA Network AP96 board */
ATH79_MACH_ALFA_NX, /* ALFA Network N2/N5 board */

15
target/linux/ar71xx/image/nand.mk
View File

@ -84,6 +84,21 @@ define Device/rambutan
endef
TARGET_DEVICES += rambutan
define Device/wi2a-ac200i
SUPPORTED_DEVICES = $(1)
DEVICE_TITLE := Nokia WI2A-AC200i
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath9k kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := WI2A-AC200i
BLOCKSIZE := 64k
KERNEL_SIZE := 3648k
IMAGE_SIZE := 32m
IMAGES := sysupgrade.tar
MTDPARTS := spi0.0:256k(u-boot)ro,64k(envFacA)ro,64k(envFacB)ro,64k(ART)ro,128k(u-boot-env)
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += wi2a-ac200i
define Device/z1
DEVICE_TITLE := Meraki Z1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-spi-gpio kmod-ath9k kmod-owl-loader

1
target/linux/ar71xx/nand/config-default
View File

@ -180,6 +180,7 @@ CONFIG_ATH79_MACH_RAMBUTAN=y
# CONFIG_ATH79_MACH_UBNT_XM is not set
# CONFIG_ATH79_MACH_WEIO is not set
# CONFIG_ATH79_MACH_WHR_HP_G300N is not set
CONFIG_ATH79_MACH_WI2A_AC200I=y
# CONFIG_ATH79_MACH_WLAE_AG300N is not set
# CONFIG_ATH79_MACH_WLR8100 is not set
# CONFIG_ATH79_MACH_WNDAP360 is not set