sunxi: H3: add device tree changes for H3 Ethernet
This adds the device tree changes needed to make the GMAC stmmac driver working for the Allwinner H3 SoCs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Hauke Mehrtens
parent
cf039cf7ff
commit
25abd71efb
@ -0,0 +1,32 @@
|
||||
From d91d3daf5de90e0118227d8ddcb7bb4ff40c1b91 Mon Sep 17 00:00:00 2001
|
||||
From: Corentin Labbe <clabbe.montjoie@gmail.com>
|
||||
Date: Wed, 31 May 2017 09:18:37 +0200
|
||||
Subject: arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module
|
||||
|
||||
This patch add the dt node for the syscon register present on the
|
||||
Allwinner H3/H5
|
||||
|
||||
Only two register are present in this syscon and the only one useful is
|
||||
the one dedicated to EMAC clock..
|
||||
|
||||
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
|
||||
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
||||
---
|
||||
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 6 ++++++
|
||||
1 file changed, 6 insertions(+)
|
||||
|
||||
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
|
||||
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
|
||||
@@ -140,6 +140,12 @@
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
+ syscon: syscon@1c00000 {
|
||||
+ compatible = "allwinner,sun8i-h3-system-controller",
|
||||
+ "syscon";
|
||||
+ reg = <0x01c00000 0x1000>;
|
||||
+ };
|
||||
+
|
||||
dma: dma-controller@01c02000 {
|
||||
compatible = "allwinner,sun8i-h3-dma";
|
||||
reg = <0x01c02000 0x1000>;
|
||||
@ -0,0 +1,67 @@
|
||||
From 0eba511a3cac29d6338b22b5b727f40cf8d163df Mon Sep 17 00:00:00 2001
|
||||
From: Corentin Labbe <clabbe.montjoie@gmail.com>
|
||||
Date: Wed, 31 May 2017 09:18:38 +0200
|
||||
Subject: arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver
|
||||
|
||||
The dwmac-sun8i is an ethernet MAC hardware that support 10/100/1000
|
||||
speed.
|
||||
|
||||
This patch enable the dwmac-sun8i on Allwinner H3/H5 SoC Device-tree.
|
||||
SoC H3/H5 have an internal PHY, so optionals syscon and ephy are set.
|
||||
|
||||
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
|
||||
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
||||
---
|
||||
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 34 ++++++++++++++++++++++++++++++++++
|
||||
1 file changed, 34 insertions(+)
|
||||
|
||||
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
|
||||
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
|
||||
@@ -333,6 +333,14 @@
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <3>;
|
||||
|
||||
+ emac_rgmii_pins: emac0 {
|
||||
+ pins = "PD0", "PD1", "PD2", "PD3", "PD4",
|
||||
+ "PD5", "PD7", "PD8", "PD9", "PD10",
|
||||
+ "PD12", "PD13", "PD15", "PD16", "PD17";
|
||||
+ function = "emac";
|
||||
+ drive-strength = <40>;
|
||||
+ };
|
||||
+
|
||||
i2c0_pins: i2c0 {
|
||||
allwinner,pins = "PA11", "PA12";
|
||||
allwinner,function = "i2c0";
|
||||
@@ -431,6 +439,32 @@
|
||||
clocks = <&osc24M>;
|
||||
};
|
||||
|
||||
+ emac: ethernet@1c30000 {
|
||||
+ compatible = "allwinner,sun8i-h3-emac";
|
||||
+ syscon = <&syscon>;
|
||||
+ reg = <0x01c30000 0x104>;
|
||||
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
||||
+ interrupt-names = "macirq";
|
||||
+ resets = <&ccu RST_BUS_EMAC>;
|
||||
+ reset-names = "stmmaceth";
|
||||
+ clocks = <&ccu CLK_BUS_EMAC>;
|
||||
+ clock-names = "stmmaceth";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ status = "disabled";
|
||||
+
|
||||
+ mdio: mdio {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ int_mii_phy: ethernet-phy@1 {
|
||||
+ compatible = "ethernet-phy-ieee802.3-c22";
|
||||
+ reg = <1>;
|
||||
+ clocks = <&ccu CLK_BUS_EPHY>;
|
||||
+ resets = <&ccu RST_BUS_EPHY>;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
wdt0: watchdog@01c20ca0 {
|
||||
compatible = "allwinner,sun6i-a31-wdt";
|
||||
reg = <0x01c20ca0 0x20>;
|
||||
@ -0,0 +1,40 @@
|
||||
From a9992f2dd1890112643a93d621ff5a4c97c55d53 Mon Sep 17 00:00:00 2001
|
||||
From: Corentin Labbe <clabbe.montjoie@gmail.com>
|
||||
Date: Wed, 31 May 2017 09:18:42 +0200
|
||||
Subject: arm: sun8i: orangepi-2: Enable dwmac-sun8i
|
||||
|
||||
The dwmac-sun8i hardware is present on the Orange PI 2.
|
||||
It uses the internal PHY.
|
||||
|
||||
This patch create the needed emac node.
|
||||
|
||||
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
|
||||
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
||||
---
|
||||
arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 8 ++++++++
|
||||
1 file changed, 8 insertions(+)
|
||||
|
||||
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
|
||||
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
|
||||
@@ -55,6 +55,7 @@
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
|
||||
+ ethernet0 = &emac;
|
||||
ethernet1 = &rtl8189;
|
||||
};
|
||||
|
||||
@@ -109,6 +110,13 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
+&emac {
|
||||
+ phy-handle = <&int_mii_phy>;
|
||||
+ phy-mode = "mii";
|
||||
+ allwinner,leds-active-low;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
&ir {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ir_pins_a>;
|
||||
@ -0,0 +1,64 @@
|
||||
From 1dcd0095019aca7533eaeed9475d995a4eb30137 Mon Sep 17 00:00:00 2001
|
||||
From: Corentin Labbe <clabbe.montjoie@gmail.com>
|
||||
Date: Mon, 5 Jun 2017 21:21:26 +0200
|
||||
Subject: ARM: sun8i: orangepi-plus: Enable dwmac-sun8i
|
||||
|
||||
The dwmac-sun8i hardware is present on the Orange PI plus.
|
||||
It uses an external PHY rtl8211e via RGMII.
|
||||
|
||||
This patch create the needed regulator, emac and phy nodes.
|
||||
|
||||
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
|
||||
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
||||
---
|
||||
arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 32 ++++++++++++++++++++++++++++
|
||||
1 file changed, 32 insertions(+)
|
||||
|
||||
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
|
||||
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
|
||||
@@ -47,6 +47,20 @@
|
||||
model = "Xunlong Orange Pi Plus / Plus 2";
|
||||
compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
|
||||
|
||||
+ aliases {
|
||||
+ ethernet0 = &emac;
|
||||
+ };
|
||||
+
|
||||
+ reg_gmac_3v3: gmac-3v3 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "gmac-3v3";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ startup-delay-us = <100000>;
|
||||
+ enable-active-high;
|
||||
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
reg_usb3_vbus: usb3-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
pinctrl-names = "default";
|
||||
@@ -64,6 +78,24 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
+&emac {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&emac_rgmii_pins>;
|
||||
+ phy-supply = <®_gmac_3v3>;
|
||||
+ phy-handle = <&ext_rgmii_phy>;
|
||||
+ phy-mode = "rgmii";
|
||||
+
|
||||
+ allwinner,leds-active-low;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&mdio {
|
||||
+ ext_rgmii_phy: ethernet-phy@1 {
|
||||
+ compatible = "ethernet-phy-ieee802.3-c22";
|
||||
+ reg = <0>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
&mmc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc2_8bit_pins>;
|
||||
@ -0,0 +1,26 @@
|
||||
From 072b6e3692532b6281bf781ded1c7a986ac17471 Mon Sep 17 00:00:00 2001
|
||||
From: Corentin Labbe <clabbe.montjoie@gmail.com>
|
||||
Date: Thu, 6 Jul 2017 10:53:34 +0200
|
||||
Subject: ARM: dts: sunxi: h3/h5: Correct emac register size
|
||||
|
||||
The datasheet said that emac register size is 0x10000 not 0x104
|
||||
|
||||
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
|
||||
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
||||
[wens@csie.org: Fixed commit subject prefix]
|
||||
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
||||
---
|
||||
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
|
||||
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
|
||||
@@ -442,7 +442,7 @@
|
||||
emac: ethernet@1c30000 {
|
||||
compatible = "allwinner,sun8i-h3-emac";
|
||||
syscon = <&syscon>;
|
||||
- reg = <0x01c30000 0x104>;
|
||||
+ reg = <0x01c30000 0x10000>;
|
||||
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "macirq";
|
||||
resets = <&ccu RST_BUS_EMAC>;
|
||||
Loading…
Reference in New Issue
Block a user