apm821xx: apm82181.dtsi overhaul
- order entries by mmio address where possible - switch to lower-case address values - comment on BSP u-boot behaviour in regards to what it edits and look for - annotate irq lines with the help of interrupt-names - remove deprecated "device_type" properties The pci and network device_type had to stay since they are required by the drivers and u-boot. the cpu and memory device_types will remain as well as they are still part of the DT Spec. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
This commit is contained in:
Christian Lamparter
Hauke Mehrtens
parent
9ca82c2374
commit
1d5d77612f
@ -32,7 +32,7 @@
|
||||
compatible = "apm,bluestone";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &EMAC0;
|
||||
ethernet0 = &EMAC0; /* needed for BSP u-boot */
|
||||
};
|
||||
|
||||
cpus {
|
||||
@ -61,7 +61,7 @@
|
||||
};
|
||||
|
||||
UIC0: interrupt-controller0 {
|
||||
compatible = "apm,uic-apm82181","ibm,uic";
|
||||
compatible = "apm,uic-apm82181", "ibm,uic";
|
||||
interrupt-controller;
|
||||
cell-index = <0>;
|
||||
dcr-reg = <0x0c0 0x009>;
|
||||
@ -71,28 +71,28 @@
|
||||
};
|
||||
|
||||
UIC1: interrupt-controller1 {
|
||||
compatible = "apm,uic-apm82181","ibm,uic";
|
||||
compatible = "apm,uic-apm82181", "ibm,uic";
|
||||
interrupt-controller;
|
||||
cell-index = <1>;
|
||||
dcr-reg = <0x0d0 0x009>;
|
||||
#address-cells = <0>;
|
||||
#size-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupts = <0x1e IRQ_TYPE_LEVEL_HIGH
|
||||
0x1f IRQ_TYPE_LEVEL_HIGH>; /* cascade */
|
||||
interrupts = <0x1e IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0x1f IRQ_TYPE_LEVEL_HIGH>; /* cascade */
|
||||
interrupt-parent = <&UIC0>;
|
||||
};
|
||||
|
||||
UIC2: interrupt-controller2 {
|
||||
compatible = "apm,uic-apm82181","ibm,uic";
|
||||
compatible = "apm,uic-apm82181", "ibm,uic";
|
||||
interrupt-controller;
|
||||
cell-index = <2>;
|
||||
dcr-reg = <0x0e0 0x009>;
|
||||
#address-cells = <0>;
|
||||
#size-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupts = <0x0a IRQ_TYPE_LEVEL_HIGH
|
||||
0x0b IRQ_TYPE_LEVEL_HIGH>; /* cascade */
|
||||
interrupts = <0x0a IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0x0b IRQ_TYPE_LEVEL_HIGH>; /* cascade */
|
||||
interrupt-parent = <&UIC0>;
|
||||
};
|
||||
|
||||
@ -104,8 +104,8 @@
|
||||
#address-cells = <0>;
|
||||
#size-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupts = <0x10 IRQ_TYPE_LEVEL_HIGH
|
||||
0x11 IRQ_TYPE_LEVEL_HIGH>; /* cascade */
|
||||
interrupts = <0x10 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0x11 IRQ_TYPE_LEVEL_HIGH>; /* cascade */
|
||||
interrupt-parent = <&UIC0>;
|
||||
};
|
||||
|
||||
@ -156,7 +156,7 @@
|
||||
compatible = "apm,plb-apm82181", "ibm,plb-460ex", "ibm,plb4";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
ranges; /* Filled in by U-Boot */
|
||||
clock-frequency = <0>; /* Filled in by U-Boot */
|
||||
|
||||
SDRAM0: sdram {
|
||||
@ -172,16 +172,15 @@
|
||||
|
||||
};
|
||||
|
||||
CRYPTO: crypto@180000 {
|
||||
compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto";
|
||||
reg = <4 0x00180000 0x80400>;
|
||||
interrupt-parent = <&UIC0>;
|
||||
interrupts = <0x1d IRQ_TYPE_LEVEL_HIGH>;
|
||||
TRNG: trng@110000 {
|
||||
compatible = "amcc,ppc460ex-rng", "ppc4xx-rng", "amcc, ppc4xx-trng";
|
||||
reg = <4 0x00110000 0x100>;
|
||||
interrupt-parent = <&UIC1>;
|
||||
interrupts = <0x03 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
PKA: pka@114000 {
|
||||
device_type = "pka";
|
||||
compatible = "ppc4xx-pka", "amcc,ppc4xx-pka", "amcc, ppc4xx-pka";
|
||||
reg = <4 0x00114000 0x4000>;
|
||||
interrupt-parent = <&UIC0>;
|
||||
@ -189,13 +188,12 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
TRNG: trng@110000 {
|
||||
device_type = "trng";
|
||||
compatible = "amcc,ppc460ex-rng", "ppc4xx-rng", "amcc, ppc4xx-trng";
|
||||
reg = <4 0x00110000 0x100>;
|
||||
interrupt-parent = <&UIC1>;
|
||||
interrupts = <0x03 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "disabled";
|
||||
CRYPTO: crypto@180000 {
|
||||
compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto";
|
||||
reg = <4 0x00180000 0x80400>;
|
||||
interrupt-parent = <&UIC0>;
|
||||
interrupts = <0x1d IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "disabled"; /* hardware option */
|
||||
};
|
||||
|
||||
MAL0: mcmal {
|
||||
@ -207,59 +205,19 @@
|
||||
#address-cells = <0>;
|
||||
#size-cells = <0>;
|
||||
interrupt-parent = <&UIC2>;
|
||||
interrupts = < 0x06 IRQ_TYPE_LEVEL_HIGH /*TXEOB*/
|
||||
0x07 IRQ_TYPE_LEVEL_HIGH /*RXEOB*/
|
||||
0x03 IRQ_TYPE_LEVEL_HIGH /*SERR*/
|
||||
0x04 IRQ_TYPE_LEVEL_HIGH /*TXDE*/
|
||||
0x05 IRQ_TYPE_LEVEL_HIGH /*RXDE*/
|
||||
0x08 IRQ_TYPE_EDGE_FALLING /*TX0 COAL*/
|
||||
/*0x09 IRQ_TYPE_EDGE_FALLING TX1 COAL*/
|
||||
0x0c IRQ_TYPE_EDGE_FALLING /*RX0 COAL*/
|
||||
/*0x0d IRQ_TYPE_EDGE_FALLING RX1 COAL*/>;
|
||||
};
|
||||
|
||||
AHBDMA0: dma@bffd0800 {
|
||||
compatible = "snps,dma-spear1340";
|
||||
reg = <4 0xbffd0800 0x400>;
|
||||
interrupt-parent = <&UIC0>;
|
||||
interrupts = <0x19 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#dma-cells = <3>;
|
||||
/* use autoconfiguration for the dma setup */
|
||||
};
|
||||
|
||||
SATA0: sata@bffd1000 {
|
||||
compatible = "amcc,sata-460ex";
|
||||
reg = <4 0xbffd1000 0x800>;
|
||||
interrupt-parent = <&UIC0>;
|
||||
interrupts = <0x1a IRQ_TYPE_LEVEL_HIGH>;
|
||||
dmas = <&AHBDMA0 0 0 1>;
|
||||
dma-names = "sata-dma";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
SATA1: sata@bffd1800 {
|
||||
compatible = "amcc,sata-460ex";
|
||||
reg = <4 0xbffd1800 0x800>;
|
||||
interrupt-parent = <&UIC0>;
|
||||
interrupts = <0x1b IRQ_TYPE_LEVEL_HIGH>;
|
||||
dmas = <&AHBDMA0 1 0 2>;
|
||||
dma-names = "sata-dma";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
USBOTG0: usbotg@bff80000 {
|
||||
compatible = "amcc,dwc-otg";
|
||||
reg = <4 0xbff80000 0x10000>;
|
||||
interrupt-parent = <&USBOTG0>;
|
||||
interrupts = <0 1 2>;
|
||||
#interrupt-cells = <1>;
|
||||
#address-cells = <0>;
|
||||
#size-cells = <0>;
|
||||
interrupt-map = <0 &UIC2 0x1c IRQ_TYPE_LEVEL_HIGH /* USB-OTG */
|
||||
1 &UIC1 0x1a IRQ_TYPE_LEVEL_LOW /* HIGH-POWER */
|
||||
2 &UIC0 0x0c IRQ_TYPE_LEVEL_HIGH /* DMA */>;
|
||||
dr_mode = "host";
|
||||
status = "disabled";
|
||||
interrupts = <0x06 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0x07 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0x03 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0x04 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0x05 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0x08 IRQ_TYPE_EDGE_FALLING>,
|
||||
<0x09 IRQ_TYPE_EDGE_FALLING>,
|
||||
<0x0c IRQ_TYPE_EDGE_FALLING>,
|
||||
<0x0d IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-names = "txeob", "rxeob", "serr",
|
||||
"txde", "rxde",
|
||||
"tx0coal", "tx1coal",
|
||||
"rx0coal", "rx1coal";
|
||||
};
|
||||
|
||||
POB0: opb {
|
||||
@ -309,9 +267,9 @@
|
||||
/*
|
||||
* AMCC's BSP u-boot scans for the "ns16550"
|
||||
* compatible, without it, u-boot wouldn't
|
||||
* set the "clock-frequency" which is required.
|
||||
* set the required "clock-frequency".
|
||||
*
|
||||
* However, the hardware documentation lists:
|
||||
* The hardware documentation states:
|
||||
* "Register compatibility with 16750 register set"
|
||||
*/
|
||||
compatible = "ns16750", "ns16550";
|
||||
@ -334,14 +292,6 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
GPIO0: gpio@ef600b00 {
|
||||
compatible = "ibm,ppc4xx-gpio";
|
||||
reg = <0xef600b00 0x00000048>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
IIC0: i2c@ef600700 {
|
||||
compatible = "ibm,iic-460ex", "ibm,iic";
|
||||
reg = <0xef600700 0x00000014>;
|
||||
@ -360,15 +310,12 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
RGMII0: emac-rgmii@ef601500 {
|
||||
compatible = "ibm,rgmii-405ex", "ibm,rgmii";
|
||||
reg = <0xef601500 0x00000008>;
|
||||
has-mdio;
|
||||
};
|
||||
|
||||
TAH0: emac-tah@ef601350 {
|
||||
compatible = "ibm,tah-460ex", "ibm,tah";
|
||||
reg = <0xef601350 0x00000030>;
|
||||
GPIO0: gpio@ef600b00 {
|
||||
compatible = "ibm,ppc4xx-gpio";
|
||||
reg = <0xef600b00 0x00000048>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
EMAC0: ethernet@ef600c00 {
|
||||
@ -379,8 +326,10 @@
|
||||
#interrupt-cells = <1>;
|
||||
#address-cells = <0>;
|
||||
#size-cells = <0>;
|
||||
interrupt-map = <0 &UIC2 0x10 IRQ_TYPE_LEVEL_HIGH /* Status */
|
||||
1 &UIC2 0x14 IRQ_TYPE_LEVEL_HIGH /* Wake */>;
|
||||
interrupt-map = <0 &UIC2 0x10 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<1 &UIC2 0x14 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "status", "wake";
|
||||
|
||||
reg = <0xef600c00 0x000000c4>;
|
||||
local-mac-address = [000000000000]; /* Filled in by U-Boot */
|
||||
mal-device = <&MAL0>;
|
||||
@ -401,27 +350,108 @@
|
||||
has-new-stacr-staopc;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
TAH0: emac-tah@ef601350 {
|
||||
compatible = "ibm,tah-460ex", "ibm,tah";
|
||||
reg = <0xef601350 0x00000030>;
|
||||
};
|
||||
|
||||
RGMII0: emac-rgmii@ef601500 {
|
||||
compatible = "ibm,rgmii-405ex", "ibm,rgmii";
|
||||
reg = <0xef601500 0x00000008>;
|
||||
has-mdio;
|
||||
};
|
||||
};
|
||||
|
||||
USBOTG0: usbotg@bff80000 {
|
||||
compatible = "amcc,dwc-otg";
|
||||
reg = <4 0xbff80000 0x10000>;
|
||||
interrupt-parent = <&USBOTG0>;
|
||||
interrupts = <0 1 2>;
|
||||
#interrupt-cells = <1>;
|
||||
#address-cells = <0>;
|
||||
#size-cells = <0>;
|
||||
interrupt-map = <0 &UIC2 0x1c IRQ_TYPE_LEVEL_HIGH>,
|
||||
<1 &UIC1 0x1a IRQ_TYPE_LEVEL_LOW>,
|
||||
<2 &UIC0 0x0c IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "usb-otg", "high-power", "dma";
|
||||
dr_mode = "host";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
AHBDMA0: dma@bffd0800 {
|
||||
compatible = "snps,dma-spear1340";
|
||||
reg = <4 0xbffd0800 0x400>;
|
||||
interrupt-parent = <&UIC0>;
|
||||
interrupts = <0x19 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#dma-cells = <3>;
|
||||
/* use autoconfiguration for the dma setup */
|
||||
};
|
||||
|
||||
SATA0: sata@bffd1000 {
|
||||
compatible = "amcc,sata-460ex";
|
||||
reg = <4 0xbffd1000 0x800>;
|
||||
interrupt-parent = <&UIC0>;
|
||||
interrupts = <0x1a IRQ_TYPE_LEVEL_HIGH>;
|
||||
dmas = <&AHBDMA0 0 0 1>;
|
||||
dma-names = "sata-dma";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
SATA1: sata@bffd1800 {
|
||||
compatible = "amcc,sata-460ex";
|
||||
reg = <4 0xbffd1800 0x800>;
|
||||
interrupt-parent = <&UIC0>;
|
||||
interrupts = <0x1b IRQ_TYPE_LEVEL_HIGH>;
|
||||
dmas = <&AHBDMA0 1 0 2>;
|
||||
dma-names = "sata-dma";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
MSI: ppc4xx-msi@c10000000 {
|
||||
compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
|
||||
reg = <0xc 0x10000000 0x100
|
||||
0xc 0x10000000 0x100>;
|
||||
sdr-base = <0x36C>;
|
||||
msi-data = <0x00004440>;
|
||||
msi-mask = <0x0000ffe0>;
|
||||
interrupts =<0 1 2 3 4 5 6 7>;
|
||||
interrupt-parent = <&MSI>;
|
||||
#interrupt-cells = <1>;
|
||||
#address-cells = <0>;
|
||||
#size-cells = <0>;
|
||||
msi-available-ranges = <0x0 0x100>;
|
||||
interrupt-map =
|
||||
<0 &UIC3 0x18 IRQ_TYPE_EDGE_RISING>,
|
||||
<1 &UIC3 0x19 IRQ_TYPE_EDGE_RISING>,
|
||||
<2 &UIC3 0x1a IRQ_TYPE_EDGE_RISING>,
|
||||
<3 &UIC3 0x1b IRQ_TYPE_EDGE_RISING>,
|
||||
<4 &UIC3 0x1c IRQ_TYPE_EDGE_RISING>,
|
||||
<5 &UIC3 0x1d IRQ_TYPE_EDGE_RISING>,
|
||||
<6 &UIC3 0x1e IRQ_TYPE_EDGE_RISING>,
|
||||
<7 &UIC3 0x1f IRQ_TYPE_EDGE_RISING>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
PCIE0: pciex@d00000000 {
|
||||
device_type = "pci";
|
||||
device_type = "pci"; /* see ppc4xx_pci_find_bridge */
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
compatible = "ibm,plb-pciex-apm821xx", "ibm,plb-pciex";
|
||||
primary;
|
||||
port = <0x0>; /* port number */
|
||||
reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
|
||||
0x0000000c 0x08010000 0x00001000>; /* Registers */
|
||||
reg = <0x0000000d 0x00000000 0x20000000>, /* Config space access */
|
||||
<0x0000000c 0x08010000 0x00001000>; /* Registers */
|
||||
dcr-reg = <0x100 0x020>;
|
||||
sdr-base = <0x300>;
|
||||
|
||||
/* Outbound ranges, one memory and one IO,
|
||||
* later cannot be changed
|
||||
*/
|
||||
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
|
||||
0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
|
||||
0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
|
||||
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000>,
|
||||
<0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000>,
|
||||
<0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
|
||||
|
||||
/* Inbound 2GB range starting at 0 */
|
||||
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
|
||||
@ -438,37 +468,11 @@
|
||||
* The real slot is on idsel 0, so the swizzling is 1:1
|
||||
*/
|
||||
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
0x0 0x0 0x0 0x1 &UIC3 0x0c IRQ_TYPE_LEVEL_HIGH /* swizzled int A */
|
||||
0x0 0x0 0x0 0x2 &UIC3 0x0d IRQ_TYPE_LEVEL_HIGH /* swizzled int B */
|
||||
0x0 0x0 0x0 0x3 &UIC3 0x0e IRQ_TYPE_LEVEL_HIGH /* swizzled int C */
|
||||
0x0 0x0 0x0 0x4 &UIC3 0x0f IRQ_TYPE_LEVEL_HIGH /* swizzled int D */>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
MSI: ppc4xx-msi@C10000000 {
|
||||
compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
|
||||
reg = < 0xC 0x10000000 0x100
|
||||
0xC 0x10000000 0x100>;
|
||||
sdr-base = <0x36C>;
|
||||
msi-data = <0x00004440>;
|
||||
msi-mask = <0x0000ffe0>;
|
||||
interrupts =<0 1 2 3 4 5 6 7>;
|
||||
interrupt-parent = <&MSI>;
|
||||
#interrupt-cells = <1>;
|
||||
#address-cells = <0>;
|
||||
#size-cells = <0>;
|
||||
msi-available-ranges = <0x0 0x100>;
|
||||
interrupt-map = <
|
||||
0 &UIC3 0x18 IRQ_TYPE_EDGE_RISING
|
||||
1 &UIC3 0x19 IRQ_TYPE_EDGE_RISING
|
||||
2 &UIC3 0x1a IRQ_TYPE_EDGE_RISING
|
||||
3 &UIC3 0x1b IRQ_TYPE_EDGE_RISING
|
||||
4 &UIC3 0x1c IRQ_TYPE_EDGE_RISING
|
||||
5 &UIC3 0x1d IRQ_TYPE_EDGE_RISING
|
||||
6 &UIC3 0x1e IRQ_TYPE_EDGE_RISING
|
||||
7 &UIC3 0x1f IRQ_TYPE_EDGE_RISING
|
||||
>;
|
||||
interrupt-map =
|
||||
<0x0 0x0 0x0 0x1 &UIC3 0x0c IRQ_TYPE_LEVEL_HIGH>, /* swizzled int A */
|
||||
<0x0 0x0 0x0 0x2 &UIC3 0x0d IRQ_TYPE_LEVEL_HIGH>, /* swizzled int B */
|
||||
<0x0 0x0 0x0 0x3 &UIC3 0x0e IRQ_TYPE_LEVEL_HIGH>, /* swizzled int C */
|
||||
<0x0 0x0 0x0 0x4 &UIC3 0x0f IRQ_TYPE_LEVEL_HIGH>; /* swizzled int D */
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
Loading…
Reference in New Issue
Block a user