From 1d2b2e744ebcc729f12fe134e87f3e7132d4618d Mon Sep 17 00:00:00 2001 From: Koen Vandeputte Date: Wed, 27 Mar 2019 10:36:41 +0100 Subject: [PATCH] ar71xx: fix nand init issues on some rb2011 devices While flashing lots of RB2011 devices, I noticed that some of them refused to boot properly, failing over the NAND parameters. Checking in detail shows that some device seem to use another NAND flash which only support standard 2048-byte pages, without 512-byte subpage support. This commit disables usage of these small subpage completely. Advantages: - Both NAND's with(out) subpage support are working now - The nand speed increases a bit (measured roughly 1%) in typical usecases Disadvantages: - The maximum storage capacity decreases by ~0.2% as small changes can consume a full page (2048 bytes) now. Signed-off-by: Koen Vandeputte --- target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c index 7bf64905c6..aee0fb2014 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c @@ -256,7 +256,9 @@ static int rb2011_nand_scan_fixup(struct mtd_info *mtd) { #if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) struct nand_chip *chip = mtd->priv; -#endif +#else + struct nand_chip *chip = mtd_to_nand(mtd); +#endif /* < 4.6.0 */ if (mtd->writesize == 512) { /* @@ -270,6 +272,8 @@ static int rb2011_nand_scan_fixup(struct mtd_info *mtd) #endif } + chip->options = NAND_NO_SUBPAGE_WRITE; + return 0; }