ramips: add support for ELECOM WRC-1167GHBK2-S
ELECOM WRC-1167GHBK2-S is a 2.4/5 GHz band 11ac router, based on MediaTek MT7621A. Specification: - MT7621A (2-Cores, 4-Threads) - 128 MB of RAM (DDR3) - 16 MB of Flash (SPI) - 2T2R 2.4/5 GHz - MediaTek MT7615D - 5x 10/100/1000 Mbps Ethernet - 6x LEDs, 2x keys - UART header on PCB - Vcc, GND, TX, RX from ethernet port side - baudrate: 57600 bps Flash instruction using factory image: 1. Rename the factory image to "wrc-1167ghbk2-s_v0.00.bin" 2. Connect the computer to the LAN port of WRC-1167GHBK2-S 3. Connect power cable to WRC-1167GHBK2-S and turn on it 4. Access to "http://192.168.2.1/details.html" and open firmware update page ("手動更新（アップデート）") 5. Select the factory image and click apply ("適用") button 6. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
This commit is contained in:
INAGAKI Hiroshi
Mathias Kresin
parent
4645a6d318
commit
189815462c
@ -168,6 +168,7 @@ dlink,dwr-921-c1)
|
||||
ucidef_set_led_default "sigstrength" "Signal Strength" "$boardname:green:sigstrength" "0"
|
||||
;;
|
||||
dir-810l|\
|
||||
elecom,wrc-1167ghbk2-s|\
|
||||
iodata,wn-gx300gr|\
|
||||
mzk-750dhp|\
|
||||
mzk-dp150n|\
|
||||
|
||||
@ -226,7 +226,8 @@ ramips_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0"
|
||||
;;
|
||||
dir-860l-b1)
|
||||
dir-860l-b1|\
|
||||
elecom,wrc-1167ghbk2-s)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
|
||||
;;
|
||||
@ -450,6 +451,10 @@ ramips_setup_macs()
|
||||
e1700)
|
||||
wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
|
||||
;;
|
||||
elecom,wrc-1167ghbk2-s|\
|
||||
sk-wb8)
|
||||
wan_mac=$(mtd_get_mac_binary factory 57350)
|
||||
;;
|
||||
gl-mt300n-v2|\
|
||||
whr-g300n)
|
||||
wan_mac=$(mtd_get_mac_binary factory 4)
|
||||
@ -514,9 +519,6 @@ ramips_setup_macs()
|
||||
lan_mac=$(macaddr_setbit_la "$lan_mac")
|
||||
wan_mac=$(mtd_get_mac_binary factory 32772)
|
||||
;;
|
||||
sk-wb8)
|
||||
wan_mac=$(mtd_get_mac_binary factory 57350)
|
||||
;;
|
||||
tew-691gr)
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 3)
|
||||
;;
|
||||
|
||||
@ -22,6 +22,7 @@ get_status_led() {
|
||||
dch-m225|\
|
||||
dir-860l-b1|\
|
||||
e1700|\
|
||||
elecom,wrc-1167ghbk2-s|\
|
||||
ex2700|\
|
||||
ex3700|\
|
||||
fonera20n|\
|
||||
|
||||
@ -54,6 +54,7 @@ platform_check_image() {
|
||||
dir-810l|\
|
||||
duzun-dm06|\
|
||||
e1700|\
|
||||
elecom,wrc-1167ghbk2-s|\
|
||||
esr-9753|\
|
||||
ew1200|\
|
||||
ex2700|\
|
||||
|
||||
144
target/linux/ramips/dts/WRC-1167GHBK2-S.dts
Normal file
144
target/linux/ramips/dts/WRC-1167GHBK2-S.dts
Normal file
@ -0,0 +1,144 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "elecom,wrc-1167ghbk2-s", "mediatek,mt7621-soc";
|
||||
model = "ELECOM WRC-1167GHBK2-S";
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x8000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
wlan2g {
|
||||
label = "wrc-1167ghbk2-s:white:wlan2g";
|
||||
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "wrc-1167ghbk2-s:white:wlan5g";
|
||||
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
power_green {
|
||||
label = "wrc-1167ghbk2-s:green:power";
|
||||
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power_blue {
|
||||
label = "wrc-1167ghbk2-s:blue:power";
|
||||
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wrc-1167ghbk2-s:red:wps";
|
||||
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power_red {
|
||||
label = "wrc-1167ghbk2-s:red:power";
|
||||
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <20>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0xe000>;
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
m25p,chunked-io = <32>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "firmware";
|
||||
reg = <0x50000 0xf20000>;
|
||||
};
|
||||
|
||||
partition@f70000 {
|
||||
label = "user_data";
|
||||
reg = <0xf70000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@ff0000 {
|
||||
label = "NVRAM";
|
||||
reg = <0xff0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "i2c", "uart3", "jtag", "wdt";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
// WRC-1167GHBK2-S has MT7615D for 2.4/5 GHz wifi,
|
||||
// but it's not supported in OpenWrt.
|
||||
};
|
||||
|
||||
&xhci {
|
||||
status = "disabled";
|
||||
};
|
||||
@ -4,6 +4,18 @@
|
||||
|
||||
DEVICE_VARS += TPLINK_BOARD_ID TPLINK_HEADER_VERSION TPLINK_HWID TPLINK_HWREV
|
||||
|
||||
define Build/elecom-wrc-factory
|
||||
$(eval product=$(word 1,$(1)))
|
||||
$(eval version=$(word 2,$(1)))
|
||||
$(STAGING_DIR_HOST)/bin/mkhash md5 $@ >> $@
|
||||
( \
|
||||
echo -n "ELECOM $(product) v$(version)" | \
|
||||
dd bs=32 count=1 conv=sync; \
|
||||
dd if=$@; \
|
||||
) > $@.new
|
||||
mv $@.new $@
|
||||
endef
|
||||
|
||||
define Build/ubnt-erx-factory-image
|
||||
if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(KERNEL_SIZE)" ]; then \
|
||||
echo '21001:6' > $(1).compat; \
|
||||
@ -65,6 +77,16 @@ define Device/mediatek_ap-mt7621a-v60
|
||||
endef
|
||||
TARGET_DEVICES += mediatek_ap-mt7621a-v60
|
||||
|
||||
define Device/elecom_wrc-1167ghbk2-s
|
||||
DTS := WRC-1167GHBK2-S
|
||||
IMAGE_SIZE := 15488k
|
||||
DEVICE_TITLE := ELECOM WRC-1167GHBK2-S
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) |\
|
||||
elecom-wrc-factory WRC-1167GHBK2-S 0.00
|
||||
endef
|
||||
TARGET_DEVICES += elecom_wrc-1167ghbk2-s
|
||||
|
||||
define Device/ew1200
|
||||
DTS := EW1200
|
||||
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
||||
|
||||
Loading…
Reference in New Issue
Block a user