From 14a88822fd3f6883af5b4d66f584a3254202fd29 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 7 Nov 2005 01:10:50 +0000 Subject: [PATCH] add first batch of enrik's ar7 system code cleanups SVN-Revision: 2363 --- openwrt/target/linux/linux-2.4/config/ar7 | 1 + .../patches/ar7/000-ar7_support.patch | 10809 +++++++++++++++- .../patches/ar7/002-led_driver.patch | 233 +- .../linux-2.4/patches/ar7/005-vlynq.patch | 2316 ---- 4 files changed, 10739 insertions(+), 2620 deletions(-) delete mode 100644 openwrt/target/linux/linux-2.4/patches/ar7/005-vlynq.patch diff --git a/openwrt/target/linux/linux-2.4/config/ar7 b/openwrt/target/linux/linux-2.4/config/ar7 index 1b9ec49e56..d0ef2f0e90 100644 --- a/openwrt/target/linux/linux-2.4/config/ar7 +++ b/openwrt/target/linux/linux-2.4/config/ar7 @@ -745,6 +745,7 @@ CONFIG_UNIX98_PTY_COUNT=128 CONFIG_AR7_VLYNQ=y CONFIG_VLYNQ_CLK_LOCAL=y CONFIG_AR7_VLYNQ_PORTS=2 +CONFIG_AR7_ADAM2=y # # I2C support diff --git a/openwrt/target/linux/linux-2.4/patches/ar7/000-ar7_support.patch b/openwrt/target/linux/linux-2.4/patches/ar7/000-ar7_support.patch index 86d4d35178..fc7bdeb294 100644 --- a/openwrt/target/linux/linux-2.4/patches/ar7/000-ar7_support.patch +++ b/openwrt/target/linux/linux-2.4/patches/ar7/000-ar7_support.patch @@ -1,6 +1,56 @@ +diff -urN linux.old/Makefile linux.dev/Makefile +--- linux.old/Makefile 2005-10-21 16:43:16.316951500 +0200 ++++ linux.dev/Makefile 2005-10-21 16:45:42.294074500 +0200 +@@ -91,7 +91,7 @@ + + CPPFLAGS := -D__KERNEL__ -I$(HPATH) + +-CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -O2 \ ++CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ + -fno-strict-aliasing -fno-common + ifndef CONFIG_FRAME_POINTER + CFLAGS += -fomit-frame-pointer +diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile +--- linux.old/arch/mips/Makefile 2005-10-21 16:43:16.316951500 +0200 ++++ linux.dev/arch/mips/Makefile 2005-10-21 16:45:42.134064500 +0200 +@@ -369,6 +369,16 @@ + endif + + # ++# Texas Instruments AR7 ++# ++ ++ifdef CONFIG_AR7 ++LIBS += arch/mips/ar7/ar7.o ++SUBDIRS += arch/mips/ar7 ++LOADADDR += 0x94020000 ++endif ++ ++# + # DECstation family + # + ifdef CONFIG_DECSTATION +diff -urN linux.old/arch/mips/ar7/Makefile linux.dev/arch/mips/ar7/Makefile +--- linux.old/arch/mips/ar7/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/ar7/Makefile 2005-10-21 17:02:14.507635750 +0200 +@@ -0,0 +1,14 @@ ++.S.s: ++ $(CPP) $(AFLAGS) $< -o $*.s ++ ++.S.o: ++ $(CC) $(AFLAGS) -c $< -o $*.o ++ ++EXTRA_CFLAGS := -I$(TOPDIR)/include/asm/ar7 -DLITTLE_ENDIAN -D_LINK_KSEG0_ ++O_TARGET := ar7.o ++ ++obj-y := tnetd73xx_misc.o misc.o ++export-objs := misc.o irq.o init.o ++obj-y += setup.o irq.o mipsIRQ.o reset.o init.o psp_env.o memory.o printf.o cmdline.o time.o ++ ++include $(TOPDIR)/Rules.make diff -urN linux.old/arch/mips/ar7/cmdline.c linux.dev/arch/mips/ar7/cmdline.c --- linux.old/arch/mips/ar7/cmdline.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/cmdline.c 2005-08-12 19:32:05.137225512 +0200 ++++ linux.dev/arch/mips/ar7/cmdline.c 2005-10-21 16:45:42.090061750 +0200 @@ -0,0 +1,64 @@ +/* + * Carsten Langgaard, carstenl@mips.com @@ -68,8 +118,8 @@ diff -urN linux.old/arch/mips/ar7/cmdline.c linux.dev/arch/mips/ar7/cmdline.c +} diff -urN linux.old/arch/mips/ar7/init.c linux.dev/arch/mips/ar7/init.c --- linux.old/arch/mips/ar7/init.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/init.c 2005-08-12 19:34:07.215666768 +0200 -@@ -0,0 +1,182 @@ ++++ linux.dev/arch/mips/ar7/init.c 2005-10-21 17:02:14.507635750 +0200 +@@ -0,0 +1,199 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. @@ -99,11 +149,7 @@ diff -urN linux.old/arch/mips/ar7/init.c linux.dev/arch/mips/ar7/init.c +#include +#include + -+/* Environment variable */ -+typedef struct { -+ char *name; -+ char *val; -+} t_env_var; ++#include + +int prom_argc; +int *_prom_argv, *_prom_envp; @@ -144,6 +190,19 @@ diff -urN linux.old/arch/mips/ar7/init.c linux.dev/arch/mips/ar7/init.c + return NULL; +} + ++/* XXX "bootloader" won't be returned. ++ * Better make it an element of local_envp */ ++static inline t_env_var * ++prom_adam2_iterenv(t_env_var *env) { ++ if (!env) ++ env = local_envp; ++ else ++ env++; ++ if (env - local_envp > MAX_ENV_ENTRY || !env->name) ++ return 0; ++ return env; ++} ++ +char *prom_getenv(char *envname) +{ + if (env_type == 1) @@ -152,6 +211,14 @@ diff -urN linux.old/arch/mips/ar7/init.c linux.dev/arch/mips/ar7/init.c + return prom_adam2_getenv(envname); +} + ++t_env_var * ++prom_iterenv(t_env_var *last) ++{ ++ if (env_type == 1) ++ return 0; /* not yet implemented */ ++ return prom_adam2_iterenv(last); ++} ++ +static inline unsigned char str2hexnum(unsigned char c) +{ + if (c >= '0' && c <= '9') @@ -254,8 +321,8 @@ diff -urN linux.old/arch/mips/ar7/init.c linux.dev/arch/mips/ar7/init.c +} diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c --- linux.old/arch/mips/ar7/irq.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/irq.c 2005-08-12 23:42:18.679820112 +0200 -@@ -0,0 +1,709 @@ ++++ linux.dev/arch/mips/ar7/irq.c 2005-10-21 17:02:14.507635750 +0200 +@@ -0,0 +1,925 @@ +/* + * Nitin Dhingra, iamnd@ti.com + * Copyright (C) 2002 Texas Instruments, Inc. All rights reserved. @@ -289,6 +356,7 @@ diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c +#include +#include +#include ++#include +#include +#include +#include @@ -328,6 +396,10 @@ diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c + +extern asmlinkage void mipsIRQ(void); + ++#ifdef CONFIG_AR7_VLYNQ ++#include ++extern VLYNQ_DEV vlynqDevice0, vlynqDevice1; ++#endif + +/* + * The avalanche/MIPS interrupt line numbers are used to represent the @@ -406,7 +478,8 @@ diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c + + if(irq_nr >= AVALANCHE_INT_END) + { -+ printk("whee, invalid irq_nr %d\n", irq_nr); ++ printk(KERN_ERR "%s: whee, invalid irq_nr %d\n", ++ __FUNCTION__, irq_nr); + panic("IRQ, you lose..."); + } + @@ -423,6 +496,25 @@ diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c + return; + } + ++#if defined (CONFIG_AR7_VLYNQ) ++ /* Vlynq irq_nr are 72-145 in the system and are placed after ++ * the interrupts managed by the interrupt controller. ++ */ ++ if(irq_nr >= AVALANCHE_INTC_END) ++ { ++ if(irq_nr >= AVALANCHE_INT_END_LOW_VLYNQ) ++ /* Vlynq interrupts 32-63 */ ++ vlynq_interrupt_disable(&vlynqDevice1,VLYNQ_REMOTE_DVC, ++ irq_nr-AVALANCHE_INT_END_LOW_VLYNQ); ++ else ++ /* Vlynq interupts 0-31 */ ++ vlynq_interrupt_disable(&vlynqDevice0,VLYNQ_REMOTE_DVC, ++ irq_nr-AVALANCHE_INTC_END); ++ ++ goto ret_from_disable_irq; ++ } ++#endif ++ + /* irq_nr represents the line number for the interrupt. We must + * disable the channel number associated with that line number. + */ @@ -448,6 +540,10 @@ diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c + else /* secondary interrupt #'s 0-31 */ + avalanche_hw0_ecregs->exiecr = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_PRIMARY))); + ++#if defined (CONFIG_AR7_VLYNQ) ++ret_from_disable_irq: ++#endif ++ + restore_flags(flags); +} + @@ -458,7 +554,8 @@ diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c + unsigned long int_bit=0; + + if(irq_nr > AVALANCHE_INT_END) { -+ printk("whee, invalid irq_nr %d\n", irq_nr); ++ printk(KERN_ERR "%s: whee, invalid irq_nr %d\n", ++ __FUNCTION__, irq_nr); + panic("IRQ, you lose..."); + } + @@ -474,6 +571,25 @@ diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c + return; + } + ++#if defined (CONFIG_AR7_VLYNQ) ++ /* Vlynq irq_nr are 80-143 in the system and are placed after ++ * the interrupts managed by the interrupt controller. ++ */ ++ if(irq_nr >= AVALANCHE_INTC_END) ++ { ++ if(irq_nr >= AVALANCHE_INT_END_LOW_VLYNQ) ++ /* Vlynq interrupts 32-63 */ ++ vlynq_interrupt_enable(&vlynqDevice1,VLYNQ_REMOTE_DVC, ++ irq_nr-AVALANCHE_INT_END_LOW_VLYNQ); ++ else ++ /* Vlynq interupts 0-31 */ ++ vlynq_interrupt_enable(&vlynqDevice0,VLYNQ_REMOTE_DVC, ++ irq_nr-AVALANCHE_INTC_END); ++ ++ goto ret_from_enable_irq; ++ } ++#endif ++ + /* irq_nr represents the line number for the interrupt. We must + * disable the channel number associated with that line number. + */ @@ -497,6 +613,10 @@ diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c + else /* secondary interrupt #'s 0-31 */ + avalanche_hw0_ecregs->exiesr = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_PRIMARY))); + ++#if defined (CONFIG_AR7_VLYNQ) ++ret_from_enable_irq: ++#endif ++ + restore_flags(flags); +} + @@ -609,7 +729,7 @@ diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c + struct irqaction *action; + + if (irq > AVALANCHE_INT_END) { -+ printk("Trying to free IRQ%d\n",irq); ++ printk(KERN_ERR "Trying to free IRQ%d\n",irq); + return; + } + @@ -667,7 +787,7 @@ diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c + + // avalanche_hw0_ipaceregs->ipacep = (2*get_avalanche_vbus_freq()/1000000)*4; + /* hack for speeding up the pacing. */ -+ printk("the pacing pre-scalar has been set as 600.\n"); ++ printk(KERN_INFO "the pacing pre-scalar has been set as 600.\n"); + avalanche_hw0_ipaceregs->ipacep = 600; + /* Channel to line mapping, Line to Channel mapping */ + @@ -766,7 +886,7 @@ diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c + /* if action == NULL, then we don't have a handler for the irq */ + + if ( action == NULL ) { -+ printk("No handler for hw0 irq: %i\n", irq); ++ printk(KERN_ERR "No handler for hw0 irq: %i\n", irq); + return; + } + @@ -915,7 +1035,7 @@ diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c + avalanche_hw0_chregs->cintnr39 = line; + break; + default: -+ printk("Error: Unknown Avalanche interrupt channel\n"); ++ printk(KERN_ERR "Error: Unknown Avalanche interrupt channel\n"); + } + + line_to_channel[line] = channel; /* Suraj check */ @@ -965,27 +1085,172 @@ diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c + + return(0); +} -diff -urN linux.old/arch/mips/ar7/Makefile linux.dev/arch/mips/ar7/Makefile ---- linux.old/arch/mips/ar7/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/Makefile 2005-08-12 21:21:30.425150040 +0200 -@@ -0,0 +1,14 @@ -+.S.s: -+ $(CPP) $(AFLAGS) $< -o $*.s + -+.S.o: -+ $(CC) $(AFLAGS) -c $< -o $*.o ++/* Sets the trigger type: edge or level */ ++int avalanche_intr_type_set(unsigned int irq_nr, unsigned long type_val) ++{ ++ unsigned long flags; ++ unsigned long chan_nr=0; + -+EXTRA_CFLAGS := -I$(TOPDIR)/include/asm/ar7 -DLITTLE_ENDIAN -D_LINK_KSEG0_ -+O_TARGET := ar7.o ++ printk(KERN_NOTICE "AVALANCHE_INT_END_PRIMARY %d\n", ++ AVALANCHE_INT_END_PRIMARY); ++ printk(KERN_NOTICE "AVALANCHE_INT_END_SECONDARY %d\n", ++ AVALANCHE_INT_END_SECONDARY); ++ printk(KERN_NOTICE "AVALANCHE_INT_END %d\n", AVALANCHE_INT_END); ++ printk(KERN_NOTICE "AVALANCHE_INTC_END %d\n", AVALANCHE_INTC_END); ++ if(irq_nr < MIPS_EXCEPTION_OFFSET || ++ irq_nr >= AVALANCHE_INT_END) ++ { ++ printk(KERN_ERR "%s: whee, invalid irq_nr %d\n", ++ __FUNCTION__, irq_nr); ++ panic("IRQ, you lose..."); ++ return(-1); ++ } + -+obj-y := tnetd73xx_misc.o misc.o -+export-objs := misc.o -+obj-y += setup.o irq.o mipsIRQ.o reset.o init.o psp_env.o memory.o printf.o cmdline.o time.o ++ if(type_val > 1) ++ { ++ printk(KERN_ERR "Not a valid polarity value.\n"); ++ return(-1); ++ } + -+include $(TOPDIR)/Rules.make ++#if defined (CONFIG_AR7_VLYNQ) ++ /* Vlynq irq_nr are 80-143 in the system and are placed after the interrupts ++ * managed by the interrupt controller. ++ */ ++ if(irq_nr >= AVALANCHE_INTC_END) ++ { ++ /* Type values for VLYNQ are INTC are different. */ ++ if(irq_nr >= AVALANCHE_INT_END_LOW_VLYNQ) ++ /* Vlynq interrupts 32-63 */ ++ vlynq_interrupt_set_type(&vlynqDevice1, VLYNQ_REMOTE_DVC, ++ irq_nr - AVALANCHE_INT_END_LOW_VLYNQ, !type_val); ++ else ++ /* Vlynq interupts 0-31 */ ++ vlynq_interrupt_set_type(&vlynqDevice0, VLYNQ_REMOTE_DVC, ++ irq_nr - AVALANCHE_INTC_END, !type_val); ++ ++ goto ret_from_set_type; ++ } ++#endif ++ ++ irq_nr = AVINTNUM(irq_nr); ++ ++ chan_nr = line_to_channel[AVINTNUM(irq_nr)]; ++ ++ save_and_cli(flags); ++ ++ /* primary interrupt #'s 0-31 */ ++ if(chan_nr < AVALANCHE_INT_END_PRIMARY_REG1) ++ { ++ if(type_val) ++ avalanche_hw0_icregs->inttypr1 |= (1 << chan_nr); ++ else ++ avalanche_hw0_icregs->inttypr1 &= ~(1 << chan_nr); ++ } ++ /* primary interrupt #'s 32 throuth 39 */ ++ else ++ { ++ if(type_val) ++ avalanche_hw0_icregs->inttypr2 |= ++ (1 << (chan_nr - AVALANCHE_INT_END_PRIMARY_REG1)); ++ else ++ avalanche_hw0_icregs->inttypr2 &= ++ ~(1 << (chan_nr - AVALANCHE_INT_END_PRIMARY_REG1)); ++ } ++ ++ restore_flags(flags); ++ ++#if defined (CONFIG_AR7_VLYNQ) ++ret_from_set_type: ++#endif ++ ++ return(0); ++} ++ ++ ++int avalanche_intr_polarity_set(unsigned int irq_nr, unsigned long polarity_val) ++{ ++ unsigned long flags; ++ unsigned long chan_nr=0; ++ ++ if(irq_nr < MIPS_EXCEPTION_OFFSET || ++ irq_nr >= AVALANCHE_INT_END) ++ { ++ printk(KERN_ERR "%s: whee, invalid irq_nr %d\n", ++ __FUNCTION__, irq_nr); ++#if defined (CONFIG_AR7_VLYNQ) ++ printk(KERN_ERR "Not one of the primary or vlynq avalanche interrupts.\n"); ++#else ++ printk(KERN_ERR "Not one of the primary avalanche interrupts\n"); ++#endif ++ panic("IRQ, you lose..."); ++ return(-1); ++ } ++ ++ if(polarity_val > 1) ++ { ++ printk(KERN_ERR "Not a valid polarity value.\n"); ++ return(-1); ++ } ++ ++ ++#if defined (CONFIG_AR7_VLYNQ) ++ /* Vlynq irq_nr are 80-143 in the system and are placed after the interrupts ++ * managed by the interrupt controller. ++ */ ++ if(irq_nr >= AVALANCHE_INTC_END) ++ { ++ if(irq_nr >= AVALANCHE_INT_END_LOW_VLYNQ) ++ /* Vlynq interrupts 32-63 */ ++ vlynq_interrupt_set_polarity(&vlynqDevice1, VLYNQ_REMOTE_DVC, ++ irq_nr - AVALANCHE_INT_END_LOW_VLYNQ, polarity_val); ++ else ++ /* Vlynq interupts 0-31 */ ++ vlynq_interrupt_set_polarity(&vlynqDevice0, VLYNQ_REMOTE_DVC, ++ irq_nr - AVALANCHE_INTC_END, polarity_val); ++ goto ret_from_set_polarity; ++ } ++#endif ++ ++ irq_nr = AVINTNUM(irq_nr); ++ ++ chan_nr = line_to_channel[irq_nr]; ++ ++ save_and_cli(flags); ++ ++ /* primary interrupt #'s 0-31 */ ++ if(chan_nr < AVALANCHE_INT_END_PRIMARY_REG1) ++ { ++ if(polarity_val) ++ avalanche_hw0_icregs->intpolr1 |= (1 << chan_nr); ++ else ++ avalanche_hw0_icregs->intpolr1 &= ~(1 << chan_nr); ++ } ++ /* primary interrupt #'s 32 throuth 39 */ ++ else ++ { ++ if(polarity_val) ++ avalanche_hw0_icregs->intpolr2 |= ++ (1 << (chan_nr - AVALANCHE_INT_END_PRIMARY_REG1)); ++ else ++ avalanche_hw0_icregs->intpolr2 &= ++ ~(1 << (chan_nr - AVALANCHE_INT_END_PRIMARY_REG1)); ++ } ++ ++ restore_flags(flags); ++ ++#if defined (CONFIG_AR7_VLYNQ) ++ret_from_set_polarity: ++#endif ++ ++ return(0); ++} ++ ++EXPORT_SYMBOL(avalanche_intr_polarity_set); ++EXPORT_SYMBOL(avalanche_intr_type_set); diff -urN linux.old/arch/mips/ar7/memory.c linux.dev/arch/mips/ar7/memory.c --- linux.old/arch/mips/ar7/memory.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/memory.c 2005-08-12 19:52:25.301732312 +0200 ++++ linux.dev/arch/mips/ar7/memory.c 2005-10-21 16:45:42.090061750 +0200 @@ -0,0 +1,131 @@ +/* + * Carsten Langgaard, carstenl@mips.com @@ -1120,7 +1385,7 @@ diff -urN linux.old/arch/mips/ar7/memory.c linux.dev/arch/mips/ar7/memory.c +} diff -urN linux.old/arch/mips/ar7/mipsIRQ.S linux.dev/arch/mips/ar7/mipsIRQ.S --- linux.old/arch/mips/ar7/mipsIRQ.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/mipsIRQ.S 2005-08-12 19:32:05.138225360 +0200 ++++ linux.dev/arch/mips/ar7/mipsIRQ.S 2005-10-21 16:45:42.118063500 +0200 @@ -0,0 +1,120 @@ +/* + * Carsten Langgaard, carstenl@mips.com @@ -1244,7 +1509,7 @@ diff -urN linux.old/arch/mips/ar7/mipsIRQ.S linux.dev/arch/mips/ar7/mipsIRQ.S +END(mipsIRQ) diff -urN linux.old/arch/mips/ar7/misc.c linux.dev/arch/mips/ar7/misc.c --- linux.old/arch/mips/ar7/misc.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/misc.c 2005-08-12 19:32:05.136225664 +0200 ++++ linux.dev/arch/mips/ar7/misc.c 2005-10-21 16:45:42.122063750 +0200 @@ -0,0 +1,319 @@ +#include +#include @@ -1567,7 +1832,7 @@ diff -urN linux.old/arch/mips/ar7/misc.c linux.dev/arch/mips/ar7/misc.c + diff -urN linux.old/arch/mips/ar7/platform.h linux.dev/arch/mips/ar7/platform.h --- linux.old/arch/mips/ar7/platform.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/platform.h 2005-08-12 19:34:07.216666616 +0200 ++++ linux.dev/arch/mips/ar7/platform.h 2005-10-21 16:45:42.122063750 +0200 @@ -0,0 +1,65 @@ +#ifndef _PLATFORM_H_ +#define _PLATFORM_H_ @@ -1636,7 +1901,7 @@ diff -urN linux.old/arch/mips/ar7/platform.h linux.dev/arch/mips/ar7/platform.h +#endif diff -urN linux.old/arch/mips/ar7/printf.c linux.dev/arch/mips/ar7/printf.c --- linux.old/arch/mips/ar7/printf.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/printf.c 2005-08-12 19:32:05.139225208 +0200 ++++ linux.dev/arch/mips/ar7/printf.c 2005-10-21 16:45:42.122063750 +0200 @@ -0,0 +1,53 @@ +/* + * Carsten Langgaard, carstenl@mips.com @@ -1693,7 +1958,7 @@ diff -urN linux.old/arch/mips/ar7/printf.c linux.dev/arch/mips/ar7/printf.c +} diff -urN linux.old/arch/mips/ar7/psp_env.c linux.dev/arch/mips/ar7/psp_env.c --- linux.old/arch/mips/ar7/psp_env.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/psp_env.c 2005-08-12 19:34:07.216666616 +0200 ++++ linux.dev/arch/mips/ar7/psp_env.c 2005-10-21 16:45:42.122063750 +0200 @@ -0,0 +1,350 @@ +#include +#include @@ -2047,7 +2312,7 @@ diff -urN linux.old/arch/mips/ar7/psp_env.c linux.dev/arch/mips/ar7/psp_env.c +} diff -urN linux.old/arch/mips/ar7/reset.c linux.dev/arch/mips/ar7/reset.c --- linux.old/arch/mips/ar7/reset.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/reset.c 2005-08-12 19:32:05.139225208 +0200 ++++ linux.dev/arch/mips/ar7/reset.c 2005-10-21 16:45:42.122063750 +0200 @@ -0,0 +1,56 @@ +/* + * Carsten Langgaard, carstenl@mips.com @@ -2107,7 +2372,7 @@ diff -urN linux.old/arch/mips/ar7/reset.c linux.dev/arch/mips/ar7/reset.c +} diff -urN linux.old/arch/mips/ar7/setup.c linux.dev/arch/mips/ar7/setup.c --- linux.old/arch/mips/ar7/setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/setup.c 2005-08-12 19:32:05.139225208 +0200 ++++ linux.dev/arch/mips/ar7/setup.c 2005-10-21 16:45:42.122063750 +0200 @@ -0,0 +1,120 @@ +/* + * Carsten Langgaard, carstenl@mips.com @@ -2231,7 +2496,7 @@ diff -urN linux.old/arch/mips/ar7/setup.c linux.dev/arch/mips/ar7/setup.c +} diff -urN linux.old/arch/mips/ar7/time.c linux.dev/arch/mips/ar7/time.c --- linux.old/arch/mips/ar7/time.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/time.c 2005-08-12 23:34:00.272589528 +0200 ++++ linux.dev/arch/mips/ar7/time.c 2005-10-21 16:45:42.126064000 +0200 @@ -0,0 +1,124 @@ +/* + * Carsten Langgaard, carstenl@mips.com @@ -2359,7 +2624,7 @@ diff -urN linux.old/arch/mips/ar7/time.c linux.dev/arch/mips/ar7/time.c +} diff -urN linux.old/arch/mips/ar7/tnetd73xx_misc.c linux.dev/arch/mips/ar7/tnetd73xx_misc.c --- linux.old/arch/mips/ar7/tnetd73xx_misc.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/ar7/tnetd73xx_misc.c 2005-08-12 19:32:05.140225056 +0200 ++++ linux.dev/arch/mips/ar7/tnetd73xx_misc.c 2005-10-21 16:45:42.126064000 +0200 @@ -0,0 +1,924 @@ +/****************************************************************************** + * FILE PURPOSE: TNETD73xx Misc modules API Source @@ -3286,8 +3551,8 @@ diff -urN linux.old/arch/mips/ar7/tnetd73xx_misc.c linux.dev/arch/mips/ar7/tnetd +} + diff -urN linux.old/arch/mips/config-shared.in linux.dev/arch/mips/config-shared.in ---- linux.old/arch/mips/config-shared.in 2005-07-10 03:00:44.000000000 +0200 -+++ linux.dev/arch/mips/config-shared.in 2005-08-12 19:53:15.060167880 +0200 +--- linux.old/arch/mips/config-shared.in 2005-10-21 16:43:18.917114000 +0200 ++++ linux.dev/arch/mips/config-shared.in 2005-10-21 16:45:42.126064000 +0200 @@ -20,6 +20,16 @@ mainmenu_option next_comment comment 'Machine selection' @@ -3333,8 +3598,8 @@ diff -urN linux.old/arch/mips/config-shared.in linux.dev/arch/mips/config-shared "$CONFIG_DECSTATION" = "y" -o \ "$CONFIG_IBM_WORKPAD" = "y" -o \ diff -urN linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S ---- linux.old/arch/mips/kernel/head.S 2005-07-10 02:55:18.000000000 +0200 -+++ linux.dev/arch/mips/kernel/head.S 2005-08-12 23:05:36.954533232 +0200 +--- linux.old/arch/mips/kernel/head.S 2005-10-21 16:43:16.396956500 +0200 ++++ linux.dev/arch/mips/kernel/head.S 2005-10-21 16:45:42.126064000 +0200 @@ -75,11 +75,11 @@ * size! */ @@ -3353,8 +3618,8 @@ diff -urN linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S /* diff -urN linux.old/arch/mips/kernel/irq.c linux.dev/arch/mips/kernel/irq.c ---- linux.old/arch/mips/kernel/irq.c 2005-07-10 03:00:44.000000000 +0200 -+++ linux.dev/arch/mips/kernel/irq.c 2005-08-12 19:32:05.142224752 +0200 +--- linux.old/arch/mips/kernel/irq.c 2004-02-18 14:36:30.000000000 +0100 ++++ linux.dev/arch/mips/kernel/irq.c 2005-10-21 16:45:42.130064250 +0200 @@ -76,6 +76,7 @@ * Generic, controller-independent functions: */ @@ -3405,21 +3670,21 @@ diff -urN linux.old/arch/mips/kernel/irq.c linux.dev/arch/mips/kernel/irq.c * IRQ autodetection code.. diff -urN linux.old/arch/mips/kernel/mips_ksyms.c linux.dev/arch/mips/kernel/mips_ksyms.c --- linux.old/arch/mips/kernel/mips_ksyms.c 2004-02-18 14:36:30.000000000 +0100 -+++ linux.dev/arch/mips/kernel/mips_ksyms.c 2005-08-12 19:32:05.142224752 +0200 ++++ linux.dev/arch/mips/kernel/mips_ksyms.c 2005-10-21 17:02:14.507635750 +0200 @@ -40,6 +40,12 @@ extern long __strnlen_user_nocheck_asm(const char *s); extern long __strnlen_user_asm(const char *s); +#ifdef CONFIG_AR7 ++#include +int avalanche_request_pacing(int irq_nr, unsigned int blk_num, unsigned int pace_value); -+char *prom_getenv(char *envname); +#endif + + EXPORT_SYMBOL(mips_machtype); #ifdef CONFIG_EISA EXPORT_SYMBOL(EISA_bus); -@@ -103,3 +109,9 @@ +@@ -103,3 +109,10 @@ #endif EXPORT_SYMBOL(get_wchan); @@ -3427,11 +3692,12 @@ diff -urN linux.old/arch/mips/kernel/mips_ksyms.c linux.dev/arch/mips/kernel/mip +#ifdef CONFIG_AR7 +EXPORT_SYMBOL_NOVERS(avalanche_request_pacing); +EXPORT_SYMBOL_NOVERS(prom_getenv); ++EXPORT_SYMBOL_NOVERS(prom_iterenv); +#endif + diff -urN linux.old/arch/mips/kernel/setup.c linux.dev/arch/mips/kernel/setup.c ---- linux.old/arch/mips/kernel/setup.c 2005-07-10 03:00:44.000000000 +0200 -+++ linux.dev/arch/mips/kernel/setup.c 2005-08-12 19:56:27.917849056 +0200 +--- linux.old/arch/mips/kernel/setup.c 2005-10-21 16:43:16.396956500 +0200 ++++ linux.dev/arch/mips/kernel/setup.c 2005-10-21 16:45:42.130064250 +0200 @@ -235,7 +235,11 @@ #define PFN_DOWN(x) ((x) >> PAGE_SHIFT) #define PFN_PHYS(x) ((x) << PAGE_SHIFT) @@ -3478,8 +3744,8 @@ diff -urN linux.old/arch/mips/kernel/setup.c linux.dev/arch/mips/kernel/setup.c panic("Unsupported architecture"); } diff -urN linux.old/arch/mips/kernel/traps.c linux.dev/arch/mips/kernel/traps.c ---- linux.old/arch/mips/kernel/traps.c 2005-07-10 03:00:44.000000000 +0200 -+++ linux.dev/arch/mips/kernel/traps.c 2005-08-12 23:38:46.505075576 +0200 +--- linux.old/arch/mips/kernel/traps.c 2005-10-21 16:43:16.400956750 +0200 ++++ linux.dev/arch/mips/kernel/traps.c 2005-10-21 16:45:42.130064250 +0200 @@ -869,9 +869,15 @@ exception_handlers[n] = handler; @@ -3510,8 +3776,8 @@ diff -urN linux.old/arch/mips/kernel/traps.c linux.dev/arch/mips/kernel/traps.c flush_icache_range(KSEG0, KSEG0 + 0x400); diff -urN linux.old/arch/mips/lib/promlib.c linux.dev/arch/mips/lib/promlib.c ---- linux.old/arch/mips/lib/promlib.c 2005-07-10 03:00:44.000000000 +0200 -+++ linux.dev/arch/mips/lib/promlib.c 2005-08-12 20:39:57.087195024 +0200 +--- linux.old/arch/mips/lib/promlib.c 2003-08-25 13:44:40.000000000 +0200 ++++ linux.dev/arch/mips/lib/promlib.c 2005-10-21 16:45:42.130064250 +0200 @@ -1,6 +1,8 @@ #include #include @@ -3526,29 +3792,9 @@ diff -urN linux.old/arch/mips/lib/promlib.c linux.dev/arch/mips/lib/promlib.c va_end(args); } +#endif -diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile ---- linux.old/arch/mips/Makefile 2005-07-10 03:00:44.000000000 +0200 -+++ linux.dev/arch/mips/Makefile 2005-08-12 20:38:28.398677728 +0200 -@@ -369,6 +369,16 @@ - endif - - # -+# Texas Instruments AR7 -+# -+ -+ifdef CONFIG_AR7 -+LIBS += arch/mips/ar7/ar7.o -+SUBDIRS += arch/mips/ar7 -+LOADADDR += 0x94020000 -+endif -+ -+# - # DECstation family - # - ifdef CONFIG_DECSTATION diff -urN linux.old/arch/mips/mm/init.c linux.dev/arch/mips/mm/init.c ---- linux.old/arch/mips/mm/init.c 2005-07-10 03:00:44.000000000 +0200 -+++ linux.dev/arch/mips/mm/init.c 2005-08-12 21:08:04.420681344 +0200 +--- linux.old/arch/mips/mm/init.c 2004-02-18 14:36:30.000000000 +0100 ++++ linux.dev/arch/mips/mm/init.c 2005-10-21 16:45:42.134064500 +0200 @@ -248,6 +248,9 @@ max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; @@ -3605,9 +3851,2525 @@ diff -urN linux.old/arch/mips/mm/init.c linux.dev/arch/mips/mm/init.c totalram_pages -= setup_zero_pages(); /* Setup zeroed pages. */ reservedpages = ram = 0; +diff -urN linux.old/drivers/char/Config.in linux.dev/drivers/char/Config.in +--- linux.old/drivers/char/Config.in 2005-10-21 16:43:16.440959250 +0200 ++++ linux.dev/drivers/char/Config.in 2005-10-21 17:02:20.199991500 +0200 +@@ -188,6 +188,14 @@ + tristate 'Total Impact briQ front panel driver' CONFIG_BRIQ_PANEL + fi + ++if [ "$CONFIG_AR7" = "y" ]; then ++ bool 'VLYNQ support for the TI SOC' CONFIG_AR7_VLYNQ ++ dep_bool 'VLYNQ clock source Internal' CONFIG_VLYNQ_CLK_LOCAL $CONFIG_AR7_VLYNQ ++ ++ define_int CONFIG_AR7_VLYNQ_PORTS 2 ++ tristate 'ADAM2 environment support (read-only)' CONFIG_AR7_ADAM2 ++fi ++ + source drivers/i2c/Config.in + + mainmenu_option next_comment +diff -urN linux.old/drivers/char/Config.in.orig linux.dev/drivers/char/Config.in.orig +--- linux.old/drivers/char/Config.in.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/drivers/char/Config.in.orig 2005-10-21 16:45:47.854422000 +0200 +@@ -0,0 +1,414 @@ ++# ++# Character device configuration ++# ++mainmenu_option next_comment ++comment 'Character devices' ++ ++bool 'Virtual terminal' CONFIG_VT ++if [ "$CONFIG_VT" = "y" ]; then ++ bool ' Support for console on virtual terminal' CONFIG_VT_CONSOLE ++ if [ "$CONFIG_GSC_LASI" = "y" ]; then ++ bool ' Support for Lasi/Dino PS2 port' CONFIG_GSC_PS2 ++ fi ++fi ++tristate 'Standard/generic (8250/16550 and compatible UARTs) serial support' CONFIG_SERIAL ++if [ "$CONFIG_SERIAL" = "y" ]; then ++ bool ' Support for console on serial port' CONFIG_SERIAL_CONSOLE ++ if [ "$CONFIG_GSC_LASI" = "y" ]; then ++ bool ' serial port on GSC support' CONFIG_SERIAL_GSC ++ fi ++ if [ "$CONFIG_IA64" = "y" ]; then ++ bool ' Support for serial port described by EFI HCDP table' CONFIG_SERIAL_HCDP ++ fi ++ if [ "$CONFIG_ARCH_ACORN" = "y" ]; then ++ tristate ' Atomwide serial port support' CONFIG_ATOMWIDE_SERIAL ++ tristate ' Dual serial port support' CONFIG_DUALSP_SERIAL ++ fi ++fi ++dep_mbool 'Extended dumb serial driver options' CONFIG_SERIAL_EXTENDED $CONFIG_SERIAL ++if [ "$CONFIG_SERIAL_EXTENDED" = "y" ]; then ++ bool ' Support more than 4 serial ports' CONFIG_SERIAL_MANY_PORTS ++ bool ' Support for sharing serial interrupts' CONFIG_SERIAL_SHARE_IRQ ++ bool ' Autodetect IRQ on standard ports (unsafe)' CONFIG_SERIAL_DETECT_IRQ ++ bool ' Support special multiport boards' CONFIG_SERIAL_MULTIPORT ++ bool ' Support the Bell Technologies HUB6 card' CONFIG_HUB6 ++fi ++bool 'Non-standard serial port support' CONFIG_SERIAL_NONSTANDARD ++if [ "$CONFIG_SERIAL_NONSTANDARD" = "y" ]; then ++ tristate ' Computone IntelliPort Plus serial support' CONFIG_COMPUTONE ++ tristate ' Comtrol Rocketport support' CONFIG_ROCKETPORT ++ tristate ' Cyclades async mux support' CONFIG_CYCLADES ++ if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_CYCLADES" != "n" ]; then ++ bool ' Cyclades-Z interrupt mode operation (EXPERIMENTAL)' CONFIG_CYZ_INTR ++ fi ++ if [ "$CONFIG_X86_64" != "y" ]; then ++ tristate ' Digiboard Intelligent Async Support' CONFIG_DIGIEPCA ++ if [ "$CONFIG_DIGIEPCA" = "n" ]; then ++ tristate ' Digiboard PC/Xx Support' CONFIG_DIGI ++ fi ++ fi ++ dep_tristate ' Hayes ESP serial port support' CONFIG_ESPSERIAL $CONFIG_ISA ++ tristate ' Moxa Intellio support' CONFIG_MOXA_INTELLIO ++ tristate ' Moxa SmartIO support' CONFIG_MOXA_SMARTIO ++ if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then ++ dep_tristate ' Multi-Tech multiport card support (EXPERIMENTAL)' CONFIG_ISI m ++ fi ++ tristate ' Microgate SyncLink card support' CONFIG_SYNCLINK ++ tristate ' SyncLink Multiport support' CONFIG_SYNCLINKMP ++ tristate ' HDLC line discipline support' CONFIG_N_HDLC ++ tristate ' SDL RISCom/8 card support' CONFIG_RISCOM8 ++ if [ "$CONFIG_X86_64" != "y" ]; then ++ tristate ' Specialix IO8+ card support' CONFIG_SPECIALIX ++ if [ "$CONFIG_SPECIALIX" != "n" ]; then ++ bool ' Specialix DTR/RTS pin is RTS' CONFIG_SPECIALIX_RTSCTS ++ fi ++ tristate ' Specialix SX (and SI) card support' CONFIG_SX ++ tristate ' Specialix RIO system support' CONFIG_RIO ++ if [ "$CONFIG_RIO" != "n" ]; then ++ bool ' Support really old RIO/PCI cards' CONFIG_RIO_OLDPCI ++ fi ++ fi ++ bool ' Stallion multiport serial support' CONFIG_STALDRV ++ if [ "$CONFIG_STALDRV" = "y" ]; then ++ tristate ' Stallion EasyIO or EC8/32 support' CONFIG_STALLION ++ tristate ' Stallion EC8/64, ONboard, Brumby support' CONFIG_ISTALLION ++ fi ++ if [ "$CONFIG_PARISC" = "y" ]; then ++ if [ "$CONFIG_PDC_CONSOLE" != "y" ]; then ++ bool ' Serial MUX support' CONFIG_SERIAL_MUX CONFIG_SERIAL_NONSTANDARD ++ fi ++ if [ "$CONFIG_SERIAL_MUX" != "y" ]; then ++ bool ' PDC software console support' CONFIG_PDC_CONSOLE CONFIG_SERIAL_NONSTANDARD ++ fi ++ fi ++ if [ "$CONFIG_MIPS" = "y" ]; then ++ bool ' TX3912/PR31700 serial port support' CONFIG_SERIAL_TX3912 ++ dep_bool ' Console on TX3912/PR31700 serial port' CONFIG_SERIAL_TX3912_CONSOLE $CONFIG_SERIAL_TX3912 ++ bool ' TMPTX39XX/49XX serial port support' CONFIG_SERIAL_TXX9 ++ dep_bool ' Console on TMPTX39XX/49XX serial port' CONFIG_SERIAL_TXX9_CONSOLE $CONFIG_SERIAL_TXX9 ++ if [ "$CONFIG_SOC_AU1X00" = "y" ]; then ++ bool ' Enable Au1x00 UART Support' CONFIG_AU1X00_UART ++ if [ "$CONFIG_AU1X00_UART" = "y" ]; then ++ bool ' Enable Au1x00 serial console' CONFIG_AU1X00_SERIAL_CONSOLE ++ fi ++ dep_tristate ' Au1x00 USB TTY Device support' CONFIG_AU1X00_USB_TTY $CONFIG_SOC_AU1X00 ++ if [ "$CONFIG_AU1000_USB_TTY" != "y" ]; then ++ dep_tristate ' Au1x00 USB Raw Device support' CONFIG_AU1X00_USB_RAW $CONFIG_SOC_AU1X00 ++ fi ++ if [ "$CONFIG_AU1X00_USB_TTY" != "n" -o \ ++ "$CONFIG_AU1X00_USB_RAW" != "n" ]; then ++ define_bool CONFIG_AU1X00_USB_DEVICE y ++ fi ++ fi ++ bool ' TXx927 SIO support' CONFIG_TXX927_SERIAL ++ if [ "$CONFIG_TXX927_SERIAL" = "y" ]; then ++ bool ' TXx927 SIO Console support' CONFIG_TXX927_SERIAL_CONSOLE ++ fi ++ if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]; then ++ bool ' Support for BCM1xxx onchip DUART' CONFIG_SIBYTE_SB1250_DUART ++ if [ "$CONFIG_SIBYTE_SB1250_DUART" = "y" ]; then ++ bool ' Console on BCM1xxx DUART' CONFIG_SIBYTE_SB1250_DUART_CONSOLE ++ if [ "$CONFIG_SIBYTE_SB1250_DUART_CONSOLE" = "y" ]; then ++ define_bool CONFIG_SERIAL_CONSOLE y ++ fi ++ fi ++ fi ++ fi ++ if [ "$CONFIG_DECSTATION" = "y" ]; then ++ bool ' DECstation serial support' CONFIG_SERIAL_DEC ++ dep_bool ' Support for console on a DECstation serial port' CONFIG_SERIAL_DEC_CONSOLE $CONFIG_SERIAL_DEC ++ dep_bool ' DZ11 serial support' CONFIG_DZ $CONFIG_SERIAL_DEC $CONFIG_MIPS32 ++ dep_bool ' Z85C30 serial support' CONFIG_ZS $CONFIG_SERIAL_DEC $CONFIG_TC ++ fi ++ if [ "$CONFIG_SGI_IP22" = "y" ]; then ++ bool ' SGI Zilog85C30 serial support' CONFIG_IP22_SERIAL ++ fi ++ if [ "$CONFIG_IA64" = "y" ]; then ++ bool ' SGI SN2 l1 serial port support' CONFIG_SGI_L1_SERIAL ++ if [ "$CONFIG_SGI_L1_SERIAL" = "y" ]; then ++ bool ' SGI SN2 l1 Console support' CONFIG_SGI_L1_SERIAL_CONSOLE ++ fi ++ if [ "$CONFIG_IA64_GENERIC" = "y" -o "$CONFIG_IA64_SGI_SN2" = "y" ]; then ++ bool ' SGI SN2 IOC4 serial port support' CONFIG_SGI_IOC4_SERIAL ++ fi ++ fi ++fi ++if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_ZORRO" = "y" ]; then ++ tristate 'Commodore A2232 serial support (EXPERIMENTAL)' CONFIG_A2232 ++fi ++if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then ++ bool 'DC21285 serial port support' CONFIG_SERIAL_21285 ++ if [ "$CONFIG_SERIAL_21285" = "y" ]; then ++ if [ "$CONFIG_OBSOLETE" = "y" ]; then ++ bool ' Use /dev/ttyS0 device (OBSOLETE)' CONFIG_SERIAL_21285_OLD ++ fi ++ bool ' Console on DC21285 serial port' CONFIG_SERIAL_21285_CONSOLE ++ fi ++ if [ "$CONFIG_PARISC" = "y" ]; then ++ bool ' PDC software console support' CONFIG_PDC_CONSOLE ++ fi ++fi ++if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then ++ bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD ++ if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then ++ define_bool CONFIG_IT8172_CIR y ++ else ++ bool ' Enable PS2 Keyboard Support' CONFIG_PC_KEYB ++ fi ++ bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0 ++ bool 'Enable Smart Card Reader 1 Support ' CONFIG_IT8172_SCR1 ++fi ++if [ "$CONFIG_MIPS_IVR" = "y" ]; then ++ bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD ++ if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then ++ define_bool CONFIG_IT8172_CIR y ++ fi ++ bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0 ++fi ++if [ "$CONFIG_CPU_VR41XX" = "y" ]; then ++ bool 'NEC VR4100 series Keyboard Interface Unit Support ' CONFIG_VR41XX_KIU ++fi ++bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS ++if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then ++ int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256 ++fi ++if [ "$CONFIG_PARPORT" != "n" ]; then ++ dep_tristate 'Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT ++ if [ "$CONFIG_PRINTER" != "n" ]; then ++ bool ' Support for console on line printer' CONFIG_LP_CONSOLE ++ fi ++ dep_tristate 'Support for user-space parallel port device drivers' CONFIG_PPDEV $CONFIG_PARPORT ++ dep_tristate 'Texas Instruments parallel link cable support' CONFIG_TIPAR $CONFIG_PARPORT ++fi ++ ++if [ "$CONFIG_PPC64" = "y" ] ; then ++ bool 'pSeries Hypervisor Virtual Console support' CONFIG_HVC_CONSOLE ++fi ++if [ "$CONFIG_ALL_PPC" = "y" ]; then ++ tristate 'Total Impact briQ front panel driver' CONFIG_BRIQ_PANEL ++fi ++ ++if [ "$CONFIG_AR7" = "y" ]; then ++ bool 'VLYNQ support for the TI SOC' CONFIG_AR7_VLYNQ ++ dep_bool 'VLYNQ clock source Internal' CONFIG_VLYNQ_CLK_LOCAL $CONFIG_AR7_VLYNQ ++ ++ define_int CONFIG_AR7_VLYNQ_PORTS 2 ++fi ++ ++source drivers/i2c/Config.in ++ ++mainmenu_option next_comment ++comment 'Mice' ++tristate 'Bus Mouse Support' CONFIG_BUSMOUSE ++if [ "$CONFIG_BUSMOUSE" != "n" ]; then ++ dep_tristate ' ATIXL busmouse support' CONFIG_ATIXL_BUSMOUSE $CONFIG_BUSMOUSE ++ dep_tristate ' Logitech busmouse support' CONFIG_LOGIBUSMOUSE $CONFIG_BUSMOUSE ++ dep_tristate ' Microsoft busmouse support' CONFIG_MS_BUSMOUSE $CONFIG_BUSMOUSE ++ if [ "$CONFIG_ADB" = "y" -a "$CONFIG_ADB_KEYBOARD" = "y" ]; then ++ dep_tristate ' Apple Desktop Bus mouse support (old driver)' CONFIG_ADBMOUSE $CONFIG_BUSMOUSE ++ fi ++# if [ "$CONFIG_DECSTATION" = "y" ]; then ++# dep_bool ' MAXINE Access.Bus mouse (VSXXX-BB/GB) support' CONFIG_DTOP_MOUSE $CONFIG_ACCESSBUS ++# fi ++fi ++ ++tristate 'Mouse Support (not serial and bus mice)' CONFIG_MOUSE ++if [ "$CONFIG_MOUSE" != "n" ]; then ++ bool ' PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE ++ tristate ' C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE ++ tristate ' PC110 digitizer pad support' CONFIG_PC110_PAD ++ tristate ' MK712 touch screen support' CONFIG_MK712_MOUSE ++fi ++endmenu ++ ++source drivers/char/joystick/Config.in ++ ++tristate 'QIC-02 tape support' CONFIG_QIC02_TAPE ++if [ "$CONFIG_QIC02_TAPE" != "n" ]; then ++ bool ' Do you want runtime configuration for QIC-02' CONFIG_QIC02_DYNCONF ++ if [ "$CONFIG_QIC02_DYNCONF" != "y" ]; then ++ comment ' Edit configuration parameters in ./include/linux/tpqic02.h!' ++ else ++ comment ' Setting runtime QIC-02 configuration is done with qic02conf' ++ comment ' from the tpqic02-support package. It is available at' ++ comment ' metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/' ++ fi ++fi ++ ++tristate 'IPMI top-level message handler' CONFIG_IPMI_HANDLER ++dep_mbool ' Generate a panic event to all BMCs on a panic' CONFIG_IPMI_PANIC_EVENT $CONFIG_IPMI_HANDLER ++dep_tristate ' Device interface for IPMI' CONFIG_IPMI_DEVICE_INTERFACE $CONFIG_IPMI_HANDLER ++dep_tristate ' IPMI KCS handler' CONFIG_IPMI_KCS $CONFIG_IPMI_HANDLER ++dep_tristate ' IPMI Watchdog Timer' CONFIG_IPMI_WATCHDOG $CONFIG_IPMI_HANDLER ++ ++mainmenu_option next_comment ++comment 'Watchdog Cards' ++bool 'Watchdog Timer Support' CONFIG_WATCHDOG ++if [ "$CONFIG_WATCHDOG" != "n" ]; then ++ bool ' Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT ++ tristate ' Acquire SBC Watchdog Timer' CONFIG_ACQUIRE_WDT ++ tristate ' Advantech SBC Watchdog Timer' CONFIG_ADVANTECH_WDT ++ tristate ' ALi M7101 PMU on ALi 1535D+ Watchdog Timer' CONFIG_ALIM1535_WDT ++ tristate ' ALi M7101 PMU Watchdog Timer' CONFIG_ALIM7101_WDT ++ tristate ' AMD "Elan" SC520 Watchdog Timer' CONFIG_SC520_WDT ++ tristate ' Berkshire Products PC Watchdog' CONFIG_PCWATCHDOG ++ if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then ++ tristate ' DC21285 watchdog' CONFIG_21285_WATCHDOG ++ if [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then ++ tristate ' NetWinder WB83C977 watchdog' CONFIG_977_WATCHDOG ++ fi ++ fi ++ tristate ' Eurotech CPU-1220/1410 Watchdog Timer' CONFIG_EUROTECH_WDT ++ tristate ' IB700 SBC Watchdog Timer' CONFIG_IB700_WDT ++ tristate ' ICP ELectronics Wafer 5823 Watchdog' CONFIG_WAFER_WDT ++ tristate ' Intel i810 TCO timer / Watchdog' CONFIG_I810_TCO ++ tristate ' Mixcom Watchdog' CONFIG_MIXCOMWD ++ tristate ' SBC-60XX Watchdog Timer' CONFIG_60XX_WDT ++ dep_tristate ' SC1200 Watchdog Timer (EXPERIMENTAL)' CONFIG_SC1200_WDT $CONFIG_EXPERIMENTAL ++ tristate ' NatSemi SCx200 Watchdog' CONFIG_SCx200_WDT ++ tristate ' Software Watchdog' CONFIG_SOFT_WATCHDOG ++ tristate ' W83877F (EMACS) Watchdog Timer' CONFIG_W83877F_WDT ++ tristate ' WDT Watchdog timer' CONFIG_WDT ++ tristate ' WDT PCI Watchdog timer' CONFIG_WDTPCI ++ if [ "$CONFIG_WDT" != "n" ]; then ++ bool ' WDT501 features' CONFIG_WDT_501 ++ if [ "$CONFIG_WDT_501" = "y" ]; then ++ bool ' Fan Tachometer' CONFIG_WDT_501_FAN ++ fi ++ fi ++ tristate ' ZF MachZ Watchdog' CONFIG_MACHZ_WDT ++ if [ "$CONFIG_SGI_IP22" = "y" ]; then ++ dep_tristate ' Indy/I2 Hardware Watchdog' CONFIG_INDYDOG $CONFIG_SGI_IP22 ++ fi ++ if [ "$CONFIG_8xx" = "y" ]; then ++ tristate ' MPC8xx Watchdog Timer' CONFIG_8xx_WDT ++ fi ++fi ++endmenu ++ ++if [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then ++ tristate 'NetWinder thermometer support' CONFIG_DS1620 ++ tristate 'NetWinder Button' CONFIG_NWBUTTON ++ if [ "$CONFIG_NWBUTTON" != "n" ]; then ++ bool ' Reboot Using Button' CONFIG_NWBUTTON_REBOOT ++ fi ++ tristate 'NetWinder flash support' CONFIG_NWFLASH ++fi ++tristate 'NatSemi SCx200 Support' CONFIG_SCx200 ++dep_tristate ' NatSemi SCx200 GPIO Support' CONFIG_SCx200_GPIO $CONFIG_SCx200 ++ ++if [ "$CONFIG_IA64_GENERIC" = "y" -o "$CONFIG_IA64_SGI_SN2" = "y" ] ; then ++ bool 'SGI SN2 fetchop support' CONFIG_FETCHOP ++fi ++ ++if [ "$CONFIG_X86" = "y" -o "$CONFIG_X86_64" = "y" ]; then ++ dep_tristate 'AMD 768/8111 Random Number Generator support' CONFIG_AMD_RNG $CONFIG_PCI ++fi ++if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then ++ dep_tristate 'Intel i8x0 Random Number Generator support' CONFIG_INTEL_RNG $CONFIG_PCI ++fi ++if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" -o \ ++ "$CONFIG_X86_64" = "y" ]; then ++ dep_tristate 'Intel/AMD/VIA HW Random Number Generator support' CONFIG_HW_RANDOM $CONFIG_PCI ++fi ++dep_tristate 'AMD 76x native power management (Experimental)' CONFIG_AMD_PM768 $CONFIG_PCI ++tristate '/dev/nvram support' CONFIG_NVRAM ++tristate 'Enhanced Real Time Clock Support' CONFIG_RTC ++if [ "$CONFIG_IA64" = "y" ]; then ++ bool 'EFI Real Time Clock Services' CONFIG_EFI_RTC ++fi ++if [ "$CONFIG_OBSOLETE" = "y" -a "$CONFIG_ALPHA_BOOK1" = "y" ]; then ++ bool 'Tadpole ANA H8 Support (OBSOLETE)' CONFIG_H8 ++fi ++if [ "$CONFIG_SGI_IP22" = "y" ]; then ++ tristate 'Dallas DS1286 RTC support' CONFIG_DS1286 ++fi ++if [ "$CONFIG_SGI_IP27" = "y" ]; then ++ tristate 'SGI M48T35 RTC support' CONFIG_SGI_IP27_RTC ++fi ++if [ "$CONFIG_TOSHIBA_RBTX4927" = "y" -o "$CONFIG_TOSHIBA_JMR3927" = "y" ]; then ++ tristate 'Dallas DS1742 RTC support' CONFIG_DS1742 ++fi ++ ++tristate 'Double Talk PC internal speech card support' CONFIG_DTLK ++tristate 'Siemens R3964 line discipline' CONFIG_R3964 ++tristate 'Applicom intelligent fieldbus card support' CONFIG_APPLICOM ++if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_X86" = "y" -a "$CONFIG_X86_64" != "y" ]; then ++ dep_tristate 'Sony Vaio Programmable I/O Control Device support (EXPERIMENTAL)' CONFIG_SONYPI $CONFIG_PCI ++fi ++ ++mainmenu_option next_comment ++comment 'Ftape, the floppy tape device driver' ++tristate 'Ftape (QIC-80/Travan) support' CONFIG_FTAPE ++if [ "$CONFIG_FTAPE" != "n" ]; then ++ source drivers/char/ftape/Config.in ++fi ++ ++endmenu ++ ++if [ "$CONFIG_GART_IOMMU" = "y" ]; then ++ bool '/dev/agpgart (AGP Support)' CONFIG_AGP ++ define_bool CONFIG_AGP_AMD_K8 y ++else ++ tristate '/dev/agpgart (AGP Support)' CONFIG_AGP ++fi ++if [ "$CONFIG_AGP" != "n" ]; then ++ bool ' Intel 440LX/BX/GX and I815/I820/I830M/I830MP/I840/I845/I850/I860 support' CONFIG_AGP_INTEL ++ bool ' Intel I810/I815/I830M (on-board) support' CONFIG_AGP_I810 ++ bool ' VIA chipset support' CONFIG_AGP_VIA ++ bool ' AMD Irongate, 761, and 762 support' CONFIG_AGP_AMD ++ if [ "$CONFIG_GART_IOMMU" != "y" ]; then ++ bool ' AMD Opteron/Athlon64 on-CPU GART support' CONFIG_AGP_AMD_K8 ++ fi ++ bool ' Generic SiS support' CONFIG_AGP_SIS ++ bool ' ALI chipset support' CONFIG_AGP_ALI ++ bool ' Serverworks LE/HE support' CONFIG_AGP_SWORKS ++ if [ "$CONFIG_X86" = "y" ]; then ++ bool ' NVIDIA chipset support' CONFIG_AGP_NVIDIA ++ fi ++ if [ "$CONFIG_IA64" = "y" ]; then ++ bool ' Intel 460GX support' CONFIG_AGP_I460 ++ bool ' HP ZX1 AGP support' CONFIG_AGP_HP_ZX1 ++ fi ++ bool ' ATI IGP chipset support' CONFIG_AGP_ATI ++fi ++ ++mainmenu_option next_comment ++comment 'Direct Rendering Manager (XFree86 DRI support)' ++bool 'Direct Rendering Manager (XFree86 DRI support)' CONFIG_DRM ++if [ "$CONFIG_DRM" = "y" ]; then ++ bool ' Build drivers for old (XFree 4.0) DRM' CONFIG_DRM_OLD ++ if [ "$CONFIG_DRM_OLD" = "y" ]; then ++ comment 'DRM 4.0 drivers' ++ source drivers/char/drm-4.0/Config.in ++ else ++ comment 'DRM 4.1 drivers' ++ define_bool CONFIG_DRM_NEW y ++ source drivers/char/drm/Config.in ++ fi ++fi ++ ++if [ "$CONFIG_X86" = "y" ]; then ++ tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE ++fi ++ ++endmenu ++ ++if [ "$CONFIG_HOTPLUG" = "y" -a "$CONFIG_PCMCIA" != "n" ]; then ++ source drivers/char/pcmcia/Config.in ++fi ++if [ "$CONFIG_SOC_AU1X00" = "y" ]; then ++ tristate ' Alchemy Au1x00 GPIO device support' CONFIG_AU1X00_GPIO ++ tristate ' Au1000/ADS7846 touchscreen support' CONFIG_TS_AU1X00_ADS7846 ++ #tristate ' Alchemy Au1550 PSC SPI support' CONFIG_AU1550_PSC_SPI ++fi ++if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then ++ tristate ' ITE GPIO' CONFIG_ITE_GPIO ++fi ++ ++if [ "$CONFIG_X86" = "y" ]; then ++ tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE ++ dep_tristate 'HP OB600 C/CT Pop-up mouse support' CONFIG_OBMOUSE $CONFIG_INPUT_MOUSEDEV ++fi ++ ++endmenu +diff -urN linux.old/drivers/char/Makefile linux.dev/drivers/char/Makefile +--- linux.old/drivers/char/Makefile 2005-10-21 16:43:16.460960500 +0200 ++++ linux.dev/drivers/char/Makefile 2005-10-21 17:02:20.199991500 +0200 +@@ -240,6 +240,13 @@ + obj-y += joystick/js.o + endif + ++# ++# Texas Intruments VLYNQ driver ++# ++ ++subdir-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq ++obj-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq/avalanche_vlynq.o ++ + obj-$(CONFIG_FETCHOP) += fetchop.o + obj-$(CONFIG_BUSMOUSE) += busmouse.o + obj-$(CONFIG_DTLK) += dtlk.o +@@ -340,6 +347,11 @@ + obj-y += ipmi/ipmi.o + endif + ++subdir-$(CONFIG_AR7_ADAM2) += ticfg ++ifeq ($(CONFIG_AR7_ADAM2),y) ++ obj-y += ticfg/ticfg.o ++endif ++ + include $(TOPDIR)/Rules.make + + fastdep: +diff -urN linux.old/drivers/char/Makefile.orig linux.dev/drivers/char/Makefile.orig +--- linux.old/drivers/char/Makefile.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/drivers/char/Makefile.orig 2005-10-21 16:54:20.566016250 +0200 +@@ -0,0 +1,374 @@ ++# ++# Makefile for the kernel character device drivers. ++# ++# Note! Dependencies are done automagically by 'make dep', which also ++# removes any old dependencies. DON'T put your own dependencies here ++# unless it's something special (ie not a .c file). ++# ++# Note 2! The CFLAGS definitions are now inherited from the ++# parent makes.. ++# ++ ++# ++# This file contains the font map for the default (hardware) font ++# ++FONTMAPFILE = cp437.uni ++ ++O_TARGET := char.o ++ ++obj-y += mem.o tty_io.o n_tty.o tty_ioctl.o raw.o pty.o misc.o random.o ++ ++# All of the (potential) objects that export symbols. ++# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'. ++ ++export-objs := busmouse.o console.o keyboard.o sysrq.o \ ++ misc.o pty.o random.o selection.o serial.o \ ++ sonypi.o tty_io.o tty_ioctl.o generic_serial.o \ ++ au1000_gpio.o vac-serial.o hp_psaux.o nvram.o \ ++ scx200.o fetchop.o ++ ++mod-subdirs := joystick ftape drm drm-4.0 pcmcia ++ ++list-multi := ++ ++KEYMAP =defkeymap.o ++KEYBD =pc_keyb.o ++CONSOLE =console.o ++SERIAL =serial.o ++ ++ifeq ($(ARCH),s390) ++ KEYMAP = ++ KEYBD = ++ CONSOLE = ++ SERIAL = ++endif ++ ++ifeq ($(ARCH),mips) ++ ifneq ($(CONFIG_PC_KEYB),y) ++ KEYBD = ++ endif ++ ifeq ($(CONFIG_VR41XX_KIU),y) ++ ifeq ($(CONFIG_IBM_WORKPAD),y) ++ KEYMAP = ibm_workpad_keymap.o ++ endif ++ ifeq ($(CONFIG_VICTOR_MPC30X),y) ++ KEYMAP = victor_mpc30x_keymap.o ++ endif ++ KEYBD = vr41xx_keyb.o ++ endif ++endif ++ ++ifeq ($(ARCH),s390x) ++ KEYMAP = ++ KEYBD = ++ CONSOLE = ++ SERIAL = ++endif ++ ++ifeq ($(ARCH),m68k) ++ ifdef CONFIG_AMIGA ++ KEYBD = amikeyb.o ++ else ++ ifndef CONFIG_MAC ++ KEYBD = ++ endif ++ endif ++ SERIAL = ++endif ++ ++ifeq ($(ARCH),parisc) ++ ifdef CONFIG_GSC_PS2 ++ KEYBD = hp_psaux.o hp_keyb.o ++ else ++ KEYBD = ++ endif ++ ifdef CONFIG_SERIAL_MUX ++ CONSOLE += mux.o ++ endif ++ ifdef CONFIG_PDC_CONSOLE ++ CONSOLE += pdc_console.o ++ endif ++endif ++ ++ifdef CONFIG_Q40 ++ KEYBD += q40_keyb.o ++ SERIAL = serial.o ++endif ++ ++ifdef CONFIG_APOLLO ++ KEYBD += dn_keyb.o ++endif ++ ++ifeq ($(ARCH),parisc) ++ ifdef CONFIG_GSC_PS2 ++ KEYBD = hp_psaux.o hp_keyb.o ++ else ++ KEYBD = ++ endif ++ ifdef CONFIG_PDC_CONSOLE ++ CONSOLE += pdc_console.o ++ endif ++endif ++ ++ifeq ($(ARCH),arm) ++ ifneq ($(CONFIG_PC_KEYMAP),y) ++ KEYMAP = ++ endif ++ ifneq ($(CONFIG_PC_KEYB),y) ++ KEYBD = ++ endif ++endif ++ ++ifeq ($(ARCH),sh) ++ KEYMAP = ++ KEYBD = ++ CONSOLE = ++ ifeq ($(CONFIG_SH_HP600),y) ++ KEYMAP = defkeymap.o ++ KEYBD = scan_keyb.o hp600_keyb.o ++ CONSOLE = console.o ++ endif ++ ifeq ($(CONFIG_SH_DMIDA),y) ++ # DMIDA does not connect the HD64465 PS/2 keyboard port ++ # but we allow for USB keyboards to be plugged in. ++ KEYMAP = defkeymap.o ++ KEYBD = # hd64465_keyb.o pc_keyb.o ++ CONSOLE = console.o ++ endif ++ ifeq ($(CONFIG_SH_EC3104),y) ++ KEYMAP = defkeymap.o ++ KEYBD = ec3104_keyb.o ++ CONSOLE = console.o ++ endif ++ ifeq ($(CONFIG_SH_DREAMCAST),y) ++ KEYMAP = defkeymap.o ++ KEYBD = ++ CONSOLE = console.o ++ endif ++endif ++ ++ifeq ($(CONFIG_DECSTATION),y) ++ KEYMAP = ++ KEYBD = ++endif ++ ++ifeq ($(CONFIG_BAGET_MIPS),y) ++ KEYBD = ++ SERIAL = vac-serial.o ++endif ++ ++ifeq ($(CONFIG_NINO),y) ++ SERIAL = ++endif ++ ++ifneq ($(CONFIG_SUN_SERIAL),) ++ SERIAL = ++endif ++ ++ifeq ($(CONFIG_QTRONIX_KEYBOARD),y) ++ KEYBD = qtronix.o ++ KEYMAP = qtronixmap.o ++endif ++ ++ifeq ($(CONFIG_DUMMY_KEYB),y) ++ KEYBD = dummy_keyb.o ++endif ++ ++obj-$(CONFIG_VT) += vt.o vc_screen.o consolemap.o consolemap_deftbl.o $(CONSOLE) selection.o ++obj-$(CONFIG_SERIAL) += $(SERIAL) ++obj-$(CONFIG_PARPORT_SERIAL) += parport_serial.o ++obj-$(CONFIG_SERIAL_HCDP) += hcdp_serial.o ++obj-$(CONFIG_SERIAL_21285) += serial_21285.o ++obj-$(CONFIG_SERIAL_SA1100) += serial_sa1100.o ++obj-$(CONFIG_SERIAL_AMBA) += serial_amba.o ++obj-$(CONFIG_TS_AU1X00_ADS7846) += au1000_ts.o ++obj-$(CONFIG_SERIAL_DEC) += decserial.o ++ ++ifndef CONFIG_SUN_KEYBOARD ++ obj-$(CONFIG_VT) += keyboard.o $(KEYMAP) $(KEYBD) ++else ++ obj-$(CONFIG_PCI) += keyboard.o $(KEYMAP) ++endif ++ ++obj-$(CONFIG_HIL) += hp_keyb.o ++obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o ++obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o ++obj-$(CONFIG_ROCKETPORT) += rocket.o ++obj-$(CONFIG_MOXA_SMARTIO) += mxser.o ++obj-$(CONFIG_MOXA_INTELLIO) += moxa.o ++obj-$(CONFIG_DIGI) += pcxx.o ++obj-$(CONFIG_DIGIEPCA) += epca.o ++obj-$(CONFIG_CYCLADES) += cyclades.o ++obj-$(CONFIG_STALLION) += stallion.o ++obj-$(CONFIG_ISTALLION) += istallion.o ++obj-$(CONFIG_SIBYTE_SB1250_DUART) += sb1250_duart.o ++obj-$(CONFIG_COMPUTONE) += ip2.o ip2main.o ++obj-$(CONFIG_RISCOM8) += riscom8.o ++obj-$(CONFIG_ISI) += isicom.o ++obj-$(CONFIG_ESPSERIAL) += esp.o ++obj-$(CONFIG_SYNCLINK) += synclink.o ++obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o ++obj-$(CONFIG_N_HDLC) += n_hdlc.o ++obj-$(CONFIG_SPECIALIX) += specialix.o ++obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o ++obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o ++obj-$(CONFIG_SX) += sx.o generic_serial.o ++obj-$(CONFIG_RIO) += rio/rio.o generic_serial.o ++obj-$(CONFIG_SH_SCI) += sh-sci.o generic_serial.o ++obj-$(CONFIG_SERIAL167) += serial167.o ++obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o ++obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o ++obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o ++obj-$(CONFIG_HVC_CONSOLE) += hvc_console.o ++obj-$(CONFIG_SERIAL_TX3912) += generic_serial.o serial_tx3912.o ++obj-$(CONFIG_TXX927_SERIAL) += serial_txx927.o ++obj-$(CONFIG_SERIAL_TXX9) += generic_serial.o serial_txx9.o ++obj-$(CONFIG_IP22_SERIAL) += sgiserial.o ++obj-$(CONFIG_AU1X00_UART) += au1x00-serial.o ++obj-$(CONFIG_SGI_L1_SERIAL) += sn_serial.o ++ ++subdir-$(CONFIG_RIO) += rio ++subdir-$(CONFIG_INPUT) += joystick ++ ++obj-$(CONFIG_ATIXL_BUSMOUSE) += atixlmouse.o ++obj-$(CONFIG_LOGIBUSMOUSE) += logibusmouse.o ++obj-$(CONFIG_PRINTER) += lp.o ++obj-$(CONFIG_TIPAR) += tipar.o ++obj-$(CONFIG_OBMOUSE) += obmouse.o ++ ++ifeq ($(CONFIG_INPUT),y) ++obj-y += joystick/js.o ++endif ++ ++# ++# Texas Intruments VLYNQ driver ++# ++ ++subdir-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq ++obj-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq/avalanche_vlynq.o ++ ++obj-$(CONFIG_FETCHOP) += fetchop.o ++obj-$(CONFIG_BUSMOUSE) += busmouse.o ++obj-$(CONFIG_DTLK) += dtlk.o ++obj-$(CONFIG_R3964) += n_r3964.o ++obj-$(CONFIG_APPLICOM) += applicom.o ++obj-$(CONFIG_SONYPI) += sonypi.o ++obj-$(CONFIG_MS_BUSMOUSE) += msbusmouse.o ++obj-$(CONFIG_82C710_MOUSE) += qpmouse.o ++obj-$(CONFIG_AMIGAMOUSE) += amigamouse.o ++obj-$(CONFIG_ATARIMOUSE) += atarimouse.o ++obj-$(CONFIG_ADBMOUSE) += adbmouse.o ++obj-$(CONFIG_PC110_PAD) += pc110pad.o ++obj-$(CONFIG_MK712_MOUSE) += mk712.o ++obj-$(CONFIG_RTC) += rtc.o ++obj-$(CONFIG_GEN_RTC) += genrtc.o ++obj-$(CONFIG_EFI_RTC) += efirtc.o ++obj-$(CONFIG_MIPS_RTC) += mips_rtc.o ++obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o ++ifeq ($(CONFIG_PPC),) ++ obj-$(CONFIG_NVRAM) += nvram.o ++endif ++obj-$(CONFIG_TOSHIBA) += toshiba.o ++obj-$(CONFIG_I8K) += i8k.o ++obj-$(CONFIG_DS1286) += ds1286.o ++obj-$(CONFIG_DS1620) += ds1620.o ++obj-$(CONFIG_DS1742) += ds1742.o ++obj-$(CONFIG_INTEL_RNG) += i810_rng.o ++obj-$(CONFIG_AMD_RNG) += amd768_rng.o ++obj-$(CONFIG_HW_RANDOM) += hw_random.o ++obj-$(CONFIG_AMD_PM768) += amd76x_pm.o ++obj-$(CONFIG_BRIQ_PANEL) += briq_panel.o ++ ++obj-$(CONFIG_ITE_GPIO) += ite_gpio.o ++obj-$(CONFIG_AU1X00_GPIO) += au1000_gpio.o ++obj-$(CONFIG_AU1550_PSC_SPI) += au1550_psc_spi.o ++obj-$(CONFIG_AU1X00_USB_TTY) += au1000_usbtty.o ++obj-$(CONFIG_AU1X00_USB_RAW) += au1000_usbraw.o ++obj-$(CONFIG_COBALT_LCD) += lcd.o ++ ++obj-$(CONFIG_QIC02_TAPE) += tpqic02.o ++ ++subdir-$(CONFIG_FTAPE) += ftape ++subdir-$(CONFIG_DRM_OLD) += drm-4.0 ++subdir-$(CONFIG_DRM_NEW) += drm ++subdir-$(CONFIG_PCMCIA) += pcmcia ++subdir-$(CONFIG_AGP) += agp ++ ++ifeq ($(CONFIG_FTAPE),y) ++obj-y += ftape/ftape.o ++endif ++ ++obj-$(CONFIG_H8) += h8.o ++obj-$(CONFIG_PPDEV) += ppdev.o ++obj-$(CONFIG_DZ) += dz.o ++obj-$(CONFIG_NWBUTTON) += nwbutton.o ++obj-$(CONFIG_NWFLASH) += nwflash.o ++obj-$(CONFIG_SCx200) += scx200.o ++obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o ++ ++# Only one watchdog can succeed. We probe the hardware watchdog ++# drivers first, then the softdog driver. This means if your hardware ++# watchdog dies or is 'borrowed' for some reason the software watchdog ++# still gives you some cover. ++ ++obj-$(CONFIG_PCWATCHDOG) += pcwd.o ++obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o ++obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o ++obj-$(CONFIG_IB700_WDT) += ib700wdt.o ++obj-$(CONFIG_MIXCOMWD) += mixcomwd.o ++obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o ++obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o ++obj-$(CONFIG_SC520_WDT) += sc520_wdt.o ++obj-$(CONFIG_WDT) += wdt.o ++obj-$(CONFIG_WDTPCI) += wdt_pci.o ++obj-$(CONFIG_21285_WATCHDOG) += wdt285.o ++obj-$(CONFIG_977_WATCHDOG) += wdt977.o ++obj-$(CONFIG_I810_TCO) += i810-tco.o ++obj-$(CONFIG_MACHZ_WDT) += machzwd.o ++obj-$(CONFIG_SH_WDT) += shwdt.o ++obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o ++obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o ++obj-$(CONFIG_ALIM1535_WDT) += alim1535d_wdt.o ++obj-$(CONFIG_INDYDOG) += indydog.o ++obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o ++obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o ++obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o ++obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o ++obj-$(CONFIG_INDYDOG) += indydog.o ++obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o ++ ++subdir-$(CONFIG_MWAVE) += mwave ++ifeq ($(CONFIG_MWAVE),y) ++ obj-y += mwave/mwave.o ++endif ++ ++subdir-$(CONFIG_IPMI_HANDLER) += ipmi ++ifeq ($(CONFIG_IPMI_HANDLER),y) ++ obj-y += ipmi/ipmi.o ++endif ++ ++include $(TOPDIR)/Rules.make ++ ++fastdep: ++ ++conmakehash: conmakehash.c ++ $(HOSTCC) $(HOSTCFLAGS) -o conmakehash conmakehash.c ++ ++consolemap_deftbl.c: $(FONTMAPFILE) conmakehash ++ ./conmakehash $(FONTMAPFILE) > consolemap_deftbl.c ++ ++consolemap_deftbl.o: consolemap_deftbl.c $(TOPDIR)/include/linux/types.h ++ ++.DELETE_ON_ERROR: ++ ++defkeymap.c: defkeymap.map ++ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@ ++ ++qtronixmap.c: qtronixmap.map ++ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@ ++ ++ibm_workpad_keymap.c: ibm_workpad_keymap.map ++ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@ ++ ++victor_mpc30x_keymap.c: victor_mpc30x_keymap.map ++ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@ +diff -urN linux.old/drivers/char/avalanche_vlynq/Makefile linux.dev/drivers/char/avalanche_vlynq/Makefile +--- linux.old/drivers/char/avalanche_vlynq/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/drivers/char/avalanche_vlynq/Makefile 2005-10-21 17:02:20.195991250 +0200 +@@ -0,0 +1,16 @@ ++# ++# Makefile for the linux kernel. ++# ++# Note! Dependencies are done automagically by 'make dep', which also ++# removes any old dependencies. DON'T put your own dependencies here ++# unless it's something special (ie not a .c file). ++# ++# Note 2! The CFLAGS definitions are now in the main makefile... ++ ++O_TARGET := avalanche_vlynq.o ++ ++export-objs := vlynq_board.o ++ ++obj-y += vlynq_drv.o vlynq_hal.o vlynq_board.o ++ ++include $(TOPDIR)/Rules.make +diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_board.c linux.dev/drivers/char/avalanche_vlynq/vlynq_board.c +--- linux.old/drivers/char/avalanche_vlynq/vlynq_board.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/drivers/char/avalanche_vlynq/vlynq_board.c 2005-10-21 17:02:20.195991250 +0200 +@@ -0,0 +1,184 @@ ++/* ++ * Jeff Harrell, jharrell@ti.com ++ * Copyright (C) 2001 Texas Instruments, Inc. All rights reserved. ++ * ++ * This program is free software; you can distribute it and/or modify it ++ * under the terms of the GNU General Public License (Version 2) as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ * ++ * Texas Instruments Sangam specific setup. ++ */ ++#include ++#include ++#include ++#include ++#include ++ ++#define SYS_VLYNQ_LOCAL_INTERRUPT_VECTOR 30 /* MSB - 1 bit */ ++#define SYS_VLYNQ_REMOTE_INTERRUPT_VECTOR 31 /* MSB bit */ ++#define SYS_VLYNQ_OPTIONS 0x7F; /* all options*/ ++ ++/* These defines are board specific */ ++ ++ ++#define VLYNQ0_REMOTE_WINDOW1_OFFSET (0x0C000000) ++#define VLYNQ0_REMOTE_WINDOW1_SIZE (0x500) ++ ++ ++#define VLYNQ1_REMOTE_WINDOW1_OFFSET (0x0C000000) ++#define VLYNQ1_REMOTE_WINDOW1_SIZE (0x500) ++ ++ ++extern VLYNQ_DEV vlynqDevice0, vlynqDevice1; ++int vlynq_init_status[2] = {0, 0}; ++EXPORT_SYMBOL(vlynq_init_status); ++static int reset_hack = 1; ++ ++void vlynq_ar7wrd_dev_init() ++{ ++ *(unsigned long*) AVALANCHE_GPIO_ENBL |= (1<<18); ++ vlynq_delay(20000); ++ *(unsigned long*) AVALANCHE_GPIO_DIR &= ~(1<<18); ++ vlynq_delay(20000); ++ *(unsigned long*) AVALANCHE_GPIO_DATA_OUT&= ~(1<<18); ++ vlynq_delay(50000); ++ *(unsigned long*) AVALANCHE_GPIO_DATA_OUT|= (1<<18); ++ vlynq_delay(50000); ++ ++ /* Initialize the MIPS host vlynq driver for a given vlynq interface */ ++ vlynqDevice0.dev_idx = 0; /* first vlynq module - this parameter is for reference only */ ++ vlynqDevice0.module_base = AVALANCHE_LOW_VLYNQ_CONTROL_BASE; /* vlynq0 module base address */ ++ ++#if defined(CONFIG_VLYNQ_CLK_LOCAL) ++ vlynqDevice0.clk_source = VLYNQ_CLK_SOURCE_LOCAL; ++#else ++ vlynqDevice0.clk_source = VLYNQ_CLK_SOURCE_REMOTE; ++#endif ++ vlynqDevice0.clk_div = 0x01; /* board/hardware specific */ ++ vlynqDevice0.state = VLYNQ_DRV_STATE_UNINIT; /* uninitialized module */ ++ ++ /* Populate vlynqDevice0.local_mem & Vlynq0.remote_mem based on system configuration */ ++ /*Local memory configuration */ ++ ++ /* Demiurg : not good !*/ ++#if 0 ++ vlynqDevice0.local_mem.Txmap= AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE & ~(0xc0000000) ; /* physical address */ ++ vlynqDevice0.remote_mem.RxOffset[0]= VLYNQ0_REMOTE_WINDOW1_OFFSET; /* This is specific to the board on the other end */ ++ vlynqDevice0.remote_mem.RxSize[0]=VLYNQ0_REMOTE_WINDOW1_SIZE; ++#endif ++ ++ /* Demiurg : This is how it should be ! */ ++ vlynqDevice0.local_mem.Txmap = PHYSADDR(AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE); ++#define VLYNQ_ACX111_MEM_OFFSET 0xC0000000 /* Physical address of ACX111 memory */ ++#define VLYNQ_ACX111_MEM_SIZE 0x00040000 /* Total size of the ACX111 memory */ ++#define VLYNQ_ACX111_REG_OFFSET 0xF0000000 /* PHYS_ADDR of ACX111 control registers */ ++#define VLYNQ_ACX111_REG_SIZE 0x00022000 /* Size of ACX111 registers area, MAC+PHY */ ++#define ACX111_VL1_REMOTE_SIZE 0x1000000 ++ vlynqDevice0.remote_mem.RxOffset[0] = VLYNQ_ACX111_MEM_OFFSET; ++ vlynqDevice0.remote_mem.RxSize[0] = VLYNQ_ACX111_MEM_SIZE ; ++ vlynqDevice0.remote_mem.RxOffset[1] = VLYNQ_ACX111_REG_OFFSET; ++ vlynqDevice0.remote_mem.RxSize[1] = VLYNQ_ACX111_REG_SIZE ; ++ vlynqDevice0.remote_mem.Txmap = 0; ++ vlynqDevice0.local_mem.RxOffset[0] = AVALANCHE_SDRAM_BASE; ++ vlynqDevice0.local_mem.RxSize[0] = ACX111_VL1_REMOTE_SIZE; ++ ++ ++ /* Local interrupt configuration */ ++ vlynqDevice0.local_irq.intLocal = VLYNQ_INT_LOCAL; /* Host handles vlynq interrupts*/ ++ vlynqDevice0.local_irq.intRemote = VLYNQ_INT_ROOT_ISR; /* vlynq root isr used */ ++ vlynqDevice0.local_irq.map_vector = SYS_VLYNQ_LOCAL_INTERRUPT_VECTOR; ++ vlynqDevice0.local_irq.intr_ptr = 0; /* Since remote interrupts part of vlynq root isr this is unused */ ++ ++ /* Remote interrupt configuration */ ++ vlynqDevice0.remote_irq.intLocal = VLYNQ_INT_REMOTE; /* MIPS handles interrupts */ ++ vlynqDevice0.remote_irq.intRemote = VLYNQ_INT_ROOT_ISR; /* Not significant since MIPS handles interrupts */ ++ vlynqDevice0.remote_irq.map_vector = SYS_VLYNQ_REMOTE_INTERRUPT_VECTOR; ++ vlynqDevice0. remote_irq.intr_ptr = AVALANCHE_INTC_BASE; /* Not significant since MIPS handles interrupts */ ++ ++ if(reset_hack != 1) ++ printk("About to re-init the VLYNQ.\n"); ++ ++ if(vlynq_init(&vlynqDevice0,VLYNQ_INIT_PERFORM_ALL)== 0) ++ { ++ /* Suraj added the following to keep the 1130 going. */ ++ vlynq_interrupt_vector_set(&vlynqDevice0, 0 /* intr vector line running into 1130 vlynq */, ++ 0 /* intr mapped onto the interrupt register on remote vlynq and this vlynq */, ++ VLYNQ_REMOTE_DVC, 0 /* polarity active high */, 0 /* interrupt Level triggered */); ++ ++ /* System wide interrupt is 80 for 1130, please note. */ ++ vlynq_init_status[0] = 1; ++ reset_hack = 2; ++ } ++ else ++ { ++ if(reset_hack == 1) ++ printk("VLYNQ INIT FAILED: Please try cold reboot. \n"); ++ else ++ printk("Failed to initialize the VLYNQ interface at insmod.\n"); ++ ++ } ++} ++ ++void vlynq_dev_init(void) ++{ ++ volatile unsigned int *reset_base = (unsigned int *) AVALANCHE_RESET_CONTROL_BASE; ++ ++ *reset_base &= ~((1 << AVALANCHE_LOW_VLYNQ_RESET_BIT)); /* | (1 << AVALANCHE_HIGH_VLYNQ_RESET_BIT)); */ ++ ++ vlynq_delay(20000); ++ ++ /* Bring vlynq out of reset if not already done */ ++ *reset_base |= (1 << AVALANCHE_LOW_VLYNQ_RESET_BIT); /* | (1 << AVALANCHE_HIGH_VLYNQ_RESET_BIT); */ ++ vlynq_delay(20000); /* Allowing sufficient time to VLYNQ to settle down.*/ ++ ++ vlynq_ar7wrd_dev_init( ); ++ ++} ++ ++/* This function is board specific and should be ported for each board. */ ++void remote_vlynq_dev_reset_ctrl(unsigned int module_reset_bit, ++ AVALANCHE_RESET_CTRL_T reset_ctrl) ++{ ++ if(module_reset_bit >= 32) ++ return; ++ ++ switch(module_reset_bit) ++ { ++ case 0: ++ if(OUT_OF_RESET == reset_ctrl) ++ { ++ if(reset_hack) return; ++ ++ vlynq_delay(20000); ++ printk("Un-resetting the remote device.\n"); ++ vlynq_dev_init(); ++ printk("Re-initialized the VLYNQ.\n"); ++ reset_hack = 2; ++ } ++ else if(IN_RESET == reset_ctrl) ++ { ++ *(unsigned long*) AVALANCHE_GPIO_DATA_OUT &= ~(1<<18); ++ ++ vlynq_delay(20000); ++ printk("Resetting the remote device.\n"); ++ reset_hack = 0; ++ } ++ else ++ ; ++ break; ++ ++ default: ++ break; ++ ++ } ++} ++ +diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_drv.c linux.dev/drivers/char/avalanche_vlynq/vlynq_drv.c +--- linux.old/drivers/char/avalanche_vlynq/vlynq_drv.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/drivers/char/avalanche_vlynq/vlynq_drv.c 2005-10-21 17:02:20.199991500 +0200 +@@ -0,0 +1,243 @@ ++/****************************************************************************** ++ * FILE PURPOSE: Vlynq Linux Device Driver Source ++ ****************************************************************************** ++ * FILE NAME: vlynq_drv.c ++ * ++ * DESCRIPTION: Vlynq Linux Device Driver Source ++ * ++ * REVISION HISTORY: ++ * ++ * Date Description Author ++ *----------------------------------------------------------------------------- ++ * 17 July 2003 Initial Creation Anant Gole ++ * 17 Dec 2003 Updates Sharath Kumar ++ * ++ * (C) Copyright 2003, Texas Instruments, Inc ++ *******************************************************************************/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++ ++#define TI_VLYNQ_VERSION "0.2" ++ ++/* debug on ? */ ++#define VLYNQ_DEBUG ++ ++/* Macro for debug and error printf's */ ++#ifdef VLYNQ_DEBUG ++#define DBGPRINT printk ++#else ++#define DBGPRINT(x) ++#endif ++ ++#define ERRPRINT printk ++ ++/* Define the max vlynq ports this driver will support. ++ Device name strings are statically added here */ ++#define MAX_VLYNQ_PORTS 2 ++ ++ ++/* Type define for VLYNQ private structure */ ++typedef struct vlynqPriv{ ++ int irq; ++ VLYNQ_DEV *vlynqDevice; ++}VLYNQ_PRIV; ++ ++extern int vlynq_init_status[2]; ++ ++/* Extern Global variable for vlynq devices used in initialization of the vlynq device ++ * These variables need to be populated/initialized by the system as part of initialization ++ * process. The vlynq enumerator can run at initialization and populate these globals ++ */ ++ ++VLYNQ_DEV vlynqDevice0; ++VLYNQ_DEV vlynqDevice1; ++ ++/* Defining dummy macro AVALANCHE_HIGH_VLYNQ_INT to take ++ * care of compilation in case of single vlynq device ++ */ ++ ++#ifndef AVALANCHE_HIGH_VLYNQ_INT ++#define AVALANCHE_HIGH_VLYNQ_INT 0 ++#endif ++ ++ ++ ++/* vlynq private object */ ++VLYNQ_PRIV vlynq_priv[CONFIG_AR7_VLYNQ_PORTS] = { ++ { LNXINTNUM(AVALANCHE_LOW_VLYNQ_INT),&vlynqDevice0}, ++ { LNXINTNUM(AVALANCHE_HIGH_VLYNQ_INT),&vlynqDevice1}, ++}; ++ ++extern void vlynq_dev_init(void); ++ ++ ++/* =================================== all the operations */ ++ ++static int ++vlynq_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ return 0; ++} ++ ++static struct file_operations vlynq_fops = { ++ owner: THIS_MODULE, ++ ioctl: vlynq_ioctl, ++}; ++ ++/* Vlynq device object */ ++static struct miscdevice vlynq_dev [MAX_VLYNQ_PORTS] = { ++ { MISC_DYNAMIC_MINOR , "vlynq0", &vlynq_fops }, ++ { MISC_DYNAMIC_MINOR , "vlynq1", &vlynq_fops }, ++}; ++ ++ ++/* Proc read function */ ++static int ++vlynq_read_link_proc(char *buf, char **start, off_t offset, int count, int *eof, void *unused) ++{ ++ int instance; ++ int len = 0; ++ ++ len += sprintf(buf +len,"VLYNQ Devices : %d\n",CONFIG_AR7_VLYNQ_PORTS); ++ ++ for(instance =0;instance < CONFIG_AR7_VLYNQ_PORTS;instance++) ++ { ++ int link_state; ++ char *link_msg[] = {" DOWN "," UP "}; ++ ++ if(vlynq_init_status[instance] == 0) ++ link_state = 0; ++ ++ else if (vlynq_link_check(vlynq_priv[instance].vlynqDevice)) ++ link_state = 1; ++ ++ else ++ link_state = 0; ++ ++ len += sprintf(buf + len, "VLYNQ %d: Link state: %s\n",instance,link_msg[link_state]); ++ ++ } ++ /* Print info about vlynq device 1 */ ++ ++ return len; ++} ++ ++ ++/* Proc function to display driver version */ ++static int ++vlynq_read_ver_proc(char *buf, char **start, off_t offset, int count, int *eof, void *data) ++{ ++ int instance; ++ int len=0; ++ ++ len += sprintf(buf +len,"\nTI Linux VLYNQ Driver Version %s\n",TI_VLYNQ_VERSION); ++ return len; ++} ++ ++ ++ ++ ++/* Wrapper for vlynq ISR */ ++static void lnx_vlynq_root_isr(int irq, void * arg, struct pt_regs *regs) ++{ ++ vlynq_root_isr(arg); ++} ++ ++/* =================================== init and cleanup */ ++ ++int vlynq_init_module(void) ++{ ++ int ret; ++ int unit = 0; ++ int instance_count = CONFIG_AR7_VLYNQ_PORTS; ++ volatile int *ptr; ++ ++ vlynq_dev_init(); ++ ++ DBGPRINT("Vlynq CONFIG_AR7_VLYNQ_PORTS=%d\n", CONFIG_AR7_VLYNQ_PORTS); ++ /* If num of configured vlynq ports > supported by driver return error */ ++ if (instance_count > MAX_VLYNQ_PORTS) ++ { ++ ERRPRINT("ERROR: vlynq_init_module(): Max %d supported\n", MAX_VLYNQ_PORTS); ++ return (-1); ++ } ++ ++ /* register the misc device */ ++ for (unit = 0; unit < CONFIG_AR7_VLYNQ_PORTS; unit++) ++ { ++ ret = misc_register(&vlynq_dev[unit]); ++ ++ if(ret < 0) ++ { ++ ERRPRINT("ERROR:Could not register vlynq device:%d\n",unit); ++ continue; ++ } ++ else ++ DBGPRINT("Vlynq Device %s registered with minor no %d as misc device. Result=%d\n", ++ vlynq_dev[unit].name, vlynq_dev[unit].minor, ret); ++#if 0 ++ ++ DBGPRINT("Calling vlynq init\n"); ++ ++ /* Read the global variable for VLYNQ device structure and initialize vlynq driver */ ++ ret = vlynq_init(vlynq_priv[unit].vlynqDevice,VLYNQ_INIT_PERFORM_ALL ); ++#endif ++ ++ if(vlynq_init_status[unit] == 0) ++ { ++ printk("VLYNQ %d : init failed\n",unit); ++ continue; ++ } ++ ++ /* Check link before proceeding */ ++ if (!vlynq_link_check(vlynq_priv[unit].vlynqDevice)) ++ { ++ DBGPRINT("\nError: Vlynq link not available.trying once before Exiting"); ++ } ++ else ++ { ++ DBGPRINT("Vlynq instance:%d Link UP\n",unit); ++ ++ /* Install the vlynq local root ISR */ ++ request_irq(vlynq_priv[unit].irq,lnx_vlynq_root_isr,0,vlynq_dev[unit].name,vlynq_priv[unit].vlynqDevice); ++ } ++ } ++ ++ proc_mkdir("avalanche", NULL); ++ /* Creating proc entry for the devices */ ++ create_proc_read_entry("avalanche/vlynq_link", 0, NULL, vlynq_read_link_proc, NULL); ++ create_proc_read_entry("avalanche/vlynq_ver", 0, NULL, vlynq_read_ver_proc, NULL); ++ ++ return 0; ++} ++ ++void vlynq_cleanup_module(void) ++{ ++ int unit = 0; ++ ++ for (unit = 0; unit < CONFIG_AR7_VLYNQ_PORTS; unit++) ++ { ++ DBGPRINT("vlynq_cleanup_module(): Unregistring misc device %s\n",vlynq_dev[unit].name); ++ misc_deregister(&vlynq_dev[unit]); ++ } ++ ++ remove_proc_entry("avalanche/vlynq_link", NULL); ++ remove_proc_entry("avalanche/vlynq_ver", NULL); ++} ++ ++ ++module_init(vlynq_init_module); ++module_exit(vlynq_cleanup_module); ++ +diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_hal.c linux.dev/drivers/char/avalanche_vlynq/vlynq_hal.c +--- linux.old/drivers/char/avalanche_vlynq/vlynq_hal.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/drivers/char/avalanche_vlynq/vlynq_hal.c 2005-10-21 16:45:47.838421000 +0200 +@@ -0,0 +1,1214 @@ ++/*************************************************************************** ++**+----------------------------------------------------------------------+** ++**| **** |** ++**| **** |** ++**| ******o*** |** ++**| ********_///_**** |** ++**| ***** /_//_/ **** |** ++**| ** ** (__/ **** |** ++**| ********* |** ++**| **** |** ++**| *** |** ++**| |** ++**| Copyright (c) 2003 Texas Instruments Incorporated |** ++**| ALL RIGHTS RESERVED |** ++**| |** ++**| Permission is hereby granted to licensees of Texas Instruments |** ++**| Incorporated (TI) products to use this computer program for the sole |** ++**| purpose of implementing a licensee product based on TI products. |** ++**| No other rights to reproduce, use, or disseminate this computer |** ++**| program, whether in part or in whole, are granted. |** ++**| |** ++**| TI makes no representation or warranties with respect to the |** ++**| performance of this computer program, and specifically disclaims |** ++**| any responsibility for any damages, special or consequential, |** ++**| connected with the use of this program. |** ++**| |** ++**+----------------------------------------------------------------------+** ++***************************************************************************/ ++ ++/*************************************************************************** ++ * ------------------------------------------------------------------------------ ++ * Module : vlynq_hal.c ++ * Description : This file implements VLYNQ HAL API. ++ * ------------------------------------------------------------------------------ ++ ***************************************************************************/ ++ ++#include ++#include ++#include ++ ++/**** Local Function prototypes *******/ ++static int vlynqInterruptInit(VLYNQ_DEV *pdev); ++static void vlynq_configClock(VLYNQ_DEV *pdev); ++ ++/*** Second argument must be explicitly type casted to ++ * (VLYNQ_DEV*) inside the following functions */ ++static void vlynq_local_module_isr(void *arg1, void *arg2, void *arg3); ++static void vlynq_remote_module_isr(void *arg1, void *arg2, void *arg3); ++ ++ ++volatile int vlynq_delay_value = 0; ++ ++/* Code adopted from original vlynq driver */ ++void vlynq_delay(unsigned int clktime) ++{ ++ int i = 0; ++ volatile int *ptr = &vlynq_delay_value; ++ *ptr = 0; ++ ++ /* We are assuming that the each cycle takes about ++ * 23 assembly instructions. */ ++ for(i = 0; i < (clktime + 23)/23; i++) ++ { ++ *ptr = *ptr + 1; ++ } ++} ++ ++ ++/* ---------------------------------------------------------------------------- ++ * Function : vlynq_configClock() ++ * Description: Configures clock settings based on input parameters ++ * Adapted from original vlyna driver from Cable ++ */ ++static void vlynq_configClock(VLYNQ_DEV * pdev) ++{ ++ unsigned int tmp; ++ ++ switch( pdev->clk_source) ++ { ++ case VLYNQ_CLK_SOURCE_LOCAL: /* we output the clock, clk_div in range [1..8]. */ ++ tmp = ((pdev->clk_div - 1) << 16) | VLYNQ_CTL_CLKDIR_MASK ; ++ VLYNQ_CTRL_REG = tmp; ++ VLYNQ_R_CTRL_REG = 0ul; ++ break; ++ case VLYNQ_CLK_SOURCE_REMOTE: /* we need to set the clock pin as input */ ++ VLYNQ_CTRL_REG = 0ul; ++ tmp = ((pdev->clk_div - 1) << 16) | VLYNQ_CTL_CLKDIR_MASK ; ++ VLYNQ_R_CTRL_REG = tmp; ++ break; ++ default: /* do nothing about the clock, but clear other bits. */ ++ tmp = ~(VLYNQ_CTL_CLKDIR_MASK | VLYNQ_CTL_CLKDIV_MASK); ++ VLYNQ_CTRL_REG &= tmp; ++ break; ++ } ++} ++ ++ /* ---------------------------------------------------------------------------- ++ * Function : vlynq_link_check() ++ * Description: This function checks the current VLYNQ for a link. ++ * An arbitrary amount of time is allowed for the link to come up . ++ * Returns 0 for "no link / failure " and 1 for "link available". ++ * ----------------------------------------------------------------------------- ++ */ ++unsigned int vlynq_link_check( VLYNQ_DEV * pdev) ++{ ++ /*sleep for 64 cycles, allow link to come up*/ ++ vlynq_delay(64); ++ ++ /* check status register return OK if link is found. */ ++ if (VLYNQ_STATUS_REG & VLYNQ_STS_LINK_MASK) ++ { ++ return 1; /* Link Available */ ++ } ++ else ++ { ++ return 0; /* Link Failure */ ++ } ++} ++ ++/* ---------------------------------------------------------------------------- ++ * Function : vlynq_init() ++ * Description: Initialization function accepting paramaters for VLYNQ module ++ * initialization. The Options bitmap decides what operations are performed ++ * as a part of initialization. The Input parameters are obtained through the ++ * sub fields of VLYNQ_DEV structure. ++ */ ++ ++int vlynq_init(VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options) ++{ ++ unsigned int map; ++ unsigned int val=0,cnt,tmp; ++ unsigned int counter=0; ++ VLYNQ_INTERRUPT_CNTRL *intSetting=NULL; ++ ++ /* validate arguments */ ++ if( VLYNQ_OUTRANGE(pdev->clk_source, VLYNQ_CLK_SOURCE_REMOTE, VLYNQ_CLK_SOURCE_NONE) || ++ VLYNQ_OUTRANGE(pdev->clk_div, 8, 1) ) ++ { ++ return VLYNQ_INVALID_ARG; ++ } ++ ++ /** perform all sanity checks first **/ ++ if(pdev->state != VLYNQ_DRV_STATE_UNINIT) ++ return VLYNQ_INVALID_DRV_STATE; ++ ++ /** Initialize local and remote register set addresses- additional ++ * provision to access the registers directly if need be */ ++ pdev->local = (VLYNQ_REG_SET*)pdev->module_base; ++ pdev->remote = (VLYNQ_REG_SET*) (pdev->module_base + VLYNQ_REMOTE_REGS_OFFSET); ++ ++ /* Detect faulty int configuration that might induce int pkt looping */ ++ if ( (options & VLYNQ_INIT_LOCAL_INTERRUPTS) && (options & VLYNQ_INIT_REMOTE_INTERRUPTS) ) ++ { ++ /* case when both local and remote are configured */ ++ if((pdev->local_irq.intLocal== VLYNQ_INT_REMOTE ) /* interrupts transfered to remote from local */ ++ && (pdev->remote_irq.intLocal== VLYNQ_INT_REMOTE) /* interrupts transfered from remote to local */ ++ && ((pdev->local_irq.intRemote == VLYNQ_INT_ROOT_ISR) || (pdev->remote_irq.intRemote == VLYNQ_INT_ROOT_ISR)) ) ++ { ++ return (VLYNQ_INT_CONFIG_ERR); ++ } ++ } ++ ++ pdev->state = VLYNQ_DRV_STATE_ININIT; ++ pdev->intCount = 0; ++ pdev->isrCount = 0; ++ ++ /*** Its assumed that the vlynq module has been brought out of reset ++ * before invocation of vlynq_init. Since, this operation is board specific ++ * it must be handled outside this generic driver */ ++ ++ /* Assert reset the remote device, call reset_cb, ++ * reset CB holds Reset according to the device needs. */ ++ VLYNQ_RESETCB(VLYNQ_RESET_ASSERT); ++ ++ /* Handle VLYNQ clock, HW default (Sense On Reset) is ++ * usually input for all the devices. */ ++ if (options & VLYNQ_INIT_CONFIG_CLOCK) ++ { ++ vlynq_configClock(pdev); ++ } ++ ++ /* Call reset_cb again. It will release the remote device ++ * from reset, and wait for a while. */ ++ VLYNQ_RESETCB(VLYNQ_RESET_DEASSERT); ++ ++ if(options & VLYNQ_INIT_CHECK_LINK ) ++ { ++ /* Check for link up during initialization*/ ++ while( counter < 25 ) ++ { ++ /* loop around giving a chance for link status to settle down */ ++ counter++; ++ if(vlynq_link_check(pdev)) ++ { ++ /* Link is up exit loop*/ ++ break; ++ } ++ ++ vlynq_delay(4000); ++ }/*end of while counter loop */ ++ ++ if(!vlynq_link_check(pdev)) ++ { ++ /* Handle this case as abort */ ++ pdev->state = VLYNQ_DRV_STATE_ERROR; ++ VLYNQ_RESETCB( VLYNQ_RESET_INITFAIL); ++ return VLYNQ_LINK_DOWN; ++ }/* end of if not vlynq_link_check conditional block */ ++ ++ }/*end of if options & VLYNQ_INIT_CHECK_LINK conditional block */ ++ ++ ++ if (options & VLYNQ_INIT_LOCAL_MEM_REGIONS) ++ { ++ /* Initialise local memory regions . This initialization lets ++ * the local host access remote device memory regions*/ ++ int i; ++ ++ /* configure the VLYNQ portal window to a PHYSICAL ++ * address of the local CPU */ ++ VLYNQ_ALIGN4(pdev->local_mem.Txmap); ++ VLYNQ_TXMAP_REG = (pdev->local_mem.Txmap); ++ ++ /*This code assumes input parameter is itself a physical address */ ++ for(i=0; i < VLYNQ_MAX_MEMORY_REGIONS ; i++) ++ { ++ /* Physical address on the remote */ ++ map = i+1; ++ VLYNQ_R_RXMAP_SIZE_REG(map) = 0; ++ if( pdev->remote_mem.RxSize[i]) ++ { ++ VLYNQ_ALIGN4(pdev->remote_mem.RxOffset[i]); ++ VLYNQ_ALIGN4(pdev->remote_mem.RxSize[i]); ++ VLYNQ_R_RXMAP_OFFSET_REG(map) = pdev->remote_mem.RxOffset[i]; ++ VLYNQ_R_RXMAP_SIZE_REG(map) = pdev->remote_mem.RxSize[i]; ++ } ++ } ++ } ++ ++ if(options & VLYNQ_INIT_REMOTE_MEM_REGIONS ) ++ { ++ int i; ++ ++ /* Initialise remote memory regions. This initialization lets remote ++ * device access local host memory regions. It configures the VLYNQ portal ++ * window to a PHYSICAL address of the remote */ ++ VLYNQ_ALIGN4(pdev->remote_mem.Txmap); ++ VLYNQ_R_TXMAP_REG = pdev->remote_mem.Txmap; ++ ++ for( i=0; ilocal_mem.RxSize[i]) ++ { ++ VLYNQ_ALIGN4(pdev->local_mem.RxOffset[i]); ++ VLYNQ_ALIGN4(pdev->local_mem.RxSize[i]); ++ VLYNQ_RXMAP_OFFSET_REG(map) = (pdev->local_mem.RxOffset[i]); ++ VLYNQ_RXMAP_SIZE_REG(map) = (pdev->local_mem.RxSize[i]); ++ } ++ } ++ } ++ ++ /* Adapted from original vlynq driver from cable - Calculate VLYNQ bus width */ ++ pdev->width = 3 + VLYNQ_STATUS_FLD_WIDTH(VLYNQ_STATUS_REG) ++ + VLYNQ_STATUS_FLD_WIDTH(VLYNQ_R_STATUS_REG); ++ ++ /* chance to initialize the device, e.g. to boost VLYNQ ++ * clock by modifying pdev->clk_div or and verify the width. */ ++ VLYNQ_RESETCB(VLYNQ_RESET_LINKESTABLISH); ++ ++ /* Handle VLYNQ clock, HW default (Sense On Reset) is ++ * usually input for all the devices. */ ++ if(options & VLYNQ_INIT_CONFIG_CLOCK ) ++ { ++ vlynq_configClock(pdev); ++ } ++ ++ /* last check for link*/ ++ if(options & VLYNQ_INIT_CHECK_LINK ) ++ { ++ /* Final Check for link during initialization*/ ++ while( counter < 25 ) ++ { ++ /* loop around giving a chance for link status to settle down */ ++ counter++; ++ if(vlynq_link_check(pdev)) ++ { ++ /* Link is up exit loop*/ ++ break; ++ } ++ ++ vlynq_delay(4000); ++ }/*end of while counter loop */ ++ ++ if(!vlynq_link_check(pdev)) ++ { ++ /* Handle this case as abort */ ++ pdev->state = VLYNQ_DRV_STATE_ERROR; ++ VLYNQ_RESETCB( VLYNQ_RESET_INITFAIL); ++ return VLYNQ_LINK_DOWN; ++ }/* end of if not vlynq_link_check conditional block */ ++ ++ } /* end of if options & VLYNQ_INIT_CHECK_LINK */ ++ ++ if(options & VLYNQ_INIT_LOCAL_INTERRUPTS ) ++ { ++ /* Configure local interrupt settings */ ++ intSetting = &(pdev->local_irq); ++ ++ /* Map local module status interrupts to interrupt vector*/ ++ val = intSetting->map_vector << VLYNQ_CTL_INTVEC_SHIFT ; ++ ++ /* enable local module status interrupts */ ++ val |= 0x01 << VLYNQ_CTL_INTEN_SHIFT; ++ ++ if ( intSetting->intLocal == VLYNQ_INT_LOCAL ) ++ { ++ /*set the intLocal bit*/ ++ val |= 0x01 << VLYNQ_CTL_INTLOCAL_SHIFT; ++ } ++ ++ /* Irrespective of whether interrupts are handled locally, program ++ * int2Cfg. Error checking for accidental loop(when intLocal=0 and int2Cfg=1 ++ * i.e remote packets are set intPending register->which will result in ++ * same packet being sent out) has been done already ++ */ ++ ++ if (intSetting->intRemote == VLYNQ_INT_ROOT_ISR) ++ { ++ /* Set the int2Cfg register, so that remote interrupt ++ * packets are written to intPending register */ ++ val |= 0x01 << VLYNQ_CTL_INT2CFG_SHIFT; ++ ++ /* Set intPtr register to point to intPending register */ ++ VLYNQ_INT_PTR_REG = VLYNQ_INT_PENDING_REG_PTR ; ++ } ++ else ++ { ++ /*set the interrupt pointer register*/ ++ VLYNQ_INT_PTR_REG = intSetting->intr_ptr; ++ /* Dont bother to modify int2Cfg as it would be zero */ ++ } ++ ++ /** Clear bits related to INT settings in control register **/ ++ VLYNQ_CTRL_REG = VLYNQ_CTRL_REG & (~VLYNQ_CTL_INTFIELDS_CLEAR_MASK); ++ ++ /** Or the bits to be set with Control register **/ ++ VLYNQ_CTRL_REG = VLYNQ_CTRL_REG | val; ++ ++ /* initialise local ICB */ ++ if(vlynqInterruptInit(pdev)==VLYNQ_MEMALLOC_FAIL) ++ return VLYNQ_MEMALLOC_FAIL; ++ ++ /* Install handler for local module status interrupts. By default when ++ * local interrupt setting is initialised, the local module status are ++ * enabled and handler hooked up */ ++ if(vlynq_install_isr(pdev, intSetting->map_vector, vlynq_local_module_isr, ++ pdev, NULL, NULL) == VLYNQ_INVALID_ARG) ++ return VLYNQ_INVALID_ARG; ++ } /* end of init local interrupts */ ++ ++ if(options & VLYNQ_INIT_REMOTE_INTERRUPTS ) ++ { ++ /* Configure remote interrupt settings from configuration */ ++ intSetting = &(pdev->remote_irq); ++ ++ /* Map remote module status interrupts to remote interrupt vector*/ ++ val = intSetting->map_vector << VLYNQ_CTL_INTVEC_SHIFT ; ++ /* enable remote module status interrupts */ ++ val |= 0x01 << VLYNQ_CTL_INTEN_SHIFT; ++ ++ if ( intSetting->intLocal == VLYNQ_INT_LOCAL ) ++ { ++ /*set the intLocal bit*/ ++ val |= 0x01 << VLYNQ_CTL_INTLOCAL_SHIFT; ++ } ++ ++ /* Irrespective of whether interrupts are handled locally, program ++ * int2Cfg. Error checking for accidental loop(when intLocal=0 and int2Cfg=1 ++ * i.e remote packets are set intPending register->which will result in ++ * same packet being sent out) has been done already ++ */ ++ ++ if (intSetting->intRemote == VLYNQ_INT_ROOT_ISR) ++ { ++ /* Set the int2Cfg register, so that remote interrupt ++ * packets are written to intPending register */ ++ val |= 0x01 << VLYNQ_CTL_INT2CFG_SHIFT; ++ /* Set intPtr register to point to intPending register */ ++ VLYNQ_R_INT_PTR_REG = VLYNQ_R_INT_PENDING_REG_PTR ; ++ } ++ else ++ { ++ /*set the interrupt pointer register*/ ++ VLYNQ_R_INT_PTR_REG = intSetting->intr_ptr; ++ /* Dont bother to modify int2Cfg as it would be zero */ ++ } ++ ++ if( (intSetting->intLocal == VLYNQ_INT_REMOTE) && ++ (options & VLYNQ_INIT_LOCAL_INTERRUPTS) && ++ (pdev->local_irq.intRemote == VLYNQ_INT_ROOT_ISR) ) ++ { ++ /* Install handler for remote module status interrupts. By default when ++ * remote interrupts are forwarded to local root_isr then remote_module_isr is ++ * enabled and handler hooked up */ ++ if(vlynq_install_isr(pdev,intSetting->map_vector,vlynq_remote_module_isr, ++ pdev, NULL, NULL) == VLYNQ_INVALID_ARG) ++ return VLYNQ_INVALID_ARG; ++ } ++ ++ ++ /** Clear bits related to INT settings in control register **/ ++ VLYNQ_R_CTRL_REG = VLYNQ_R_CTRL_REG & (~VLYNQ_CTL_INTFIELDS_CLEAR_MASK); ++ ++ /** Or the bits to be set with the remote Control register **/ ++ VLYNQ_R_CTRL_REG = VLYNQ_R_CTRL_REG | val; ++ ++ } /* init remote interrupt settings*/ ++ ++ if(options & VLYNQ_INIT_CLEAR_ERRORS ) ++ { ++ /* Clear errors during initialization */ ++ tmp = VLYNQ_STATUS_REG & (VLYNQ_STS_RERROR_MASK | VLYNQ_STS_LERROR_MASK); ++ VLYNQ_STATUS_REG = tmp; ++ tmp = VLYNQ_R_STATUS_REG & (VLYNQ_STS_RERROR_MASK | VLYNQ_STS_LERROR_MASK); ++ VLYNQ_R_STATUS_REG = tmp; ++ } ++ ++ /* clear int status */ ++ val = VLYNQ_INT_STAT_REG; ++ VLYNQ_INT_STAT_REG = val; ++ ++ /* finish initialization */ ++ pdev->state = VLYNQ_DRV_STATE_RUN; ++ VLYNQ_RESETCB( VLYNQ_RESET_INITOK); ++ return VLYNQ_SUCCESS; ++ ++} ++ ++ ++/* ---------------------------------------------------------------------------- ++ * Function : vlynqInterruptInit() ++ * Description: This local function is used to set up the ICB table for the ++ * VLYNQ_STATUS_REG vlynq module. The input parameter "pdev" points the vlynq ++ * device instance whose ICB is allocated. ++ * Return : returns VLYNQ_SUCCESS or vlynq error for failure ++ * ----------------------------------------------------------------------------- ++ */ ++static int vlynqInterruptInit(VLYNQ_DEV *pdev) ++{ ++ int i, numslots; ++ ++ /* Memory allocated statically. ++ * Initialise ICB,free list.Indicate primary slot empty. ++ * Intialise intVector <==> map_vector translation table*/ ++ for(i=0; i < VLYNQ_NUM_INT_BITS; i++) ++ { ++ pdev->pIntrCB[i].isr = NULL; ++ pdev->pIntrCB[i].next = NULL; /*nothing chained */ ++ pdev->vector_map[i] = -1; /* indicates unmapped */ ++ } ++ ++ /* In the ICB slots, [VLYNQ_NUM_INT_BITS i.e 32 to ICB array size) are expansion slots ++ * required only when interrupt chaining/sharing is supported. In case ++ * of chained interrupts the list starts from primary slot and the ++ * additional slots are obtained from the common free area */ ++ ++ /* Initialise freelist */ ++ ++ numslots = VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS; ++ ++ if (numslots > VLYNQ_NUM_INT_BITS) ++ { ++ pdev->freelist = &(pdev->pIntrCB[VLYNQ_NUM_INT_BITS]); ++ ++ for(i = VLYNQ_NUM_INT_BITS; i < (numslots-1) ; i++) ++ { ++ pdev->pIntrCB[i].next = &(pdev->pIntrCB[i+1]); ++ pdev->pIntrCB[i].isr = NULL; ++ } ++ pdev->pIntrCB[i].next=NULL; /* Indicate end of freelist*/ ++ pdev->pIntrCB[i].isr=NULL; ++ } ++ else ++ { ++ pdev->freelist = NULL; ++ } ++ ++ /** Reset mapping for IV 0-7 **/ ++ VLYNQ_IVR_03TO00_REG = 0; ++ VLYNQ_IVR_07TO04_REG = 0; ++ ++ return VLYNQ_SUCCESS; ++} ++ ++/** remember that hooking up of root ISR handler with the interrupt controller ++ * is not done as a part of this driver. Typically, it must be done after ++ * invoking vlynq_init*/ ++ ++ ++ /* ---------------------------------------------------------------------------- ++ * ISR with the SOC interrupt controller. This ISR typically scans ++ * the Int PENDING/SET register in the VLYNQ module and calls the ++ * appropriate ISR associated with the correponding vector number. ++ * ----------------------------------------------------------------------------- ++ */ ++void vlynq_root_isr(void *arg) ++{ ++ int source; /* Bit position of pending interrupt, start from 0 */ ++ unsigned int interrupts, clrInterrupts; ++ VLYNQ_DEV * pdev; ++ VLYNQ_INTR_CNTRL_ICB *entry; ++ ++ pdev=(VLYNQ_DEV*)(arg); /*obtain the vlynq device pointer*/ ++ ++ interrupts = VLYNQ_INT_STAT_REG; /* Get the list of pending interrupts */ ++ VLYNQ_INT_STAT_REG = interrupts; /* clear the int CR register */ ++ clrInterrupts = interrupts; /* save them for further analysis */ ++ ++ debugPrint("vlynq_root_isr: dev %u. INTCR = 0x%08lx\n", pdev->dev_idx, clrInterrupts,0,0,0,0); ++ ++ /* Scan interrupt bits */ ++ source =0; ++ while( clrInterrupts != 0) ++ { ++ /* test if bit is set? */ ++ if( 0x1ul & clrInterrupts) ++ { ++ entry = &(pdev->pIntrCB[source]); /* Get the ISR entry */ ++ pdev->intCount++; /* update interrupt count */ ++ if(entry->isr != NULL) ++ { ++ do ++ { ++ pdev->isrCount++; /* update isr invocation count */ ++ /* Call the user ISR and update the count for ISR */ ++ entry->isrCount++; ++ entry->isr(entry->arg1, entry->arg2, entry->arg3); ++ if (entry->next == NULL) break; ++ entry = entry->next; ++ ++ } while (entry->isr != NULL); ++ } ++ else ++ { ++ debugPrint(" ISR not installed for vlynq vector:%d\n",source,0,0,0,0,0); ++ } ++ } ++ clrInterrupts >>= 1; /* Next source bit */ ++ ++source; ++ } /* endWhile clrInterrupts != 0 */ ++} ++ ++ ++ /* ---------------------------------------------------------------------------- ++ * Function : vlynq_local__module_isr() ++ * Description: This ISR is attached to the local VLYNQ interrupt vector ++ * by the Vlynq Driver when local interrupts are being handled. i.e. ++ * intLocal=1. This ISR handles local Vlynq module status interrupts only ++ * AS a part of this ISR, user callback in VLYNQ_DEV structure ++ * is invoked. ++ * VLYNQ_DEV is passed as arg1. arg2 and arg3 are unused. ++ * ----------------------------------------------------------------------------- ++ */ ++static void vlynq_local_module_isr(void *arg1,void *arg2, void *arg3) ++{ ++ VLYNQ_REPORT_CB func; ++ unsigned int dwStatRegVal; ++ VLYNQ_DEV * pdev; ++ ++ pdev = (VLYNQ_DEV*) arg1; ++ /* Callback function is read from the device pointer that is passed as an argument */ ++ func = pdev->report_cb; ++ ++ /* read local status register */ ++ dwStatRegVal = VLYNQ_STATUS_REG; ++ ++ /* clear pending events */ ++ VLYNQ_STATUS_REG = dwStatRegVal; ++ ++ /* invoke user callback */ ++ if( func != NULL) ++ func( pdev, VLYNQ_LOCAL_DVC, dwStatRegVal); ++ ++} ++ ++ /* ---------------------------------------------------------------------------- ++ * Function : vlynq_remote_module_isr() ++ * Description: This ISR is attached to the remote VLYNQ interrupt vector ++ * by the Vlynq Driver when remote interrupts are being handled locally. i.e. ++ * intLocal=1. This ISR handles local Vlynq module status interrupts only ++ * AS a part of this ISR, user callback in VLYNQ_DEV structure ++ * is invoked. ++ * The parameters irq,regs ar unused. ++ * ----------------------------------------------------------------------------- ++ */ ++static void vlynq_remote_module_isr(void *arg1,void *arg2, void *arg3) ++{ ++ VLYNQ_REPORT_CB func; ++ unsigned int dwStatRegVal; ++ VLYNQ_DEV * pdev; ++ ++ ++ pdev = (VLYNQ_DEV*) arg1; ++ ++ /* Callback function is read from the device pointer that is passed as an argument */ ++ func = pdev->report_cb; ++ ++ /* read local status register */ ++ dwStatRegVal = VLYNQ_R_STATUS_REG; ++ ++ /* clear pending events */ ++ VLYNQ_R_STATUS_REG = dwStatRegVal; ++ ++ /* invoke user callback */ ++ if( func != NULL) ++ func( pdev, VLYNQ_REMOTE_DVC, dwStatRegVal); ++ ++} ++ ++/* ---------------------------------------------------------------------------- ++ * Function : vlynq_interrupt_get_count() ++ * Description: This function returns the number of times a particular intr ++ * has been invoked. ++ * ++ * It returns 0, if erroneous map_vector is specified or if the corres isr ++ * has not been registered with VLYNQ. ++ */ ++unsigned int vlynq_interrupt_get_count(VLYNQ_DEV *pdev, ++ unsigned int map_vector) ++{ ++ VLYNQ_INTR_CNTRL_ICB *entry; ++ unsigned int count = 0; ++ ++ if (map_vector > (VLYNQ_NUM_INT_BITS-1)) ++ return count; ++ ++ entry = &(pdev->pIntrCB[map_vector]); ++ ++ if (entry) ++ count = entry->isrCount; ++ ++ return (count); ++} ++ ++ ++/* ---------------------------------------------------------------------------- ++ * Function : vlynq_install_isr() ++ * Description: This function installs ISR for Vlynq interrupt vector ++ * bits(in IntPending register). This function should be used only when ++ * Vlynq interrupts are being handled locally(remote may be programmed to send ++ * interrupt packets).Also, the int2cfg should be 1 and the least significant ++ * 8 bits of the Interrupt Pointer Register must point to Interrupt ++ * Pending/Set Register). ++ * If host int2cfg=0 and the Interrupt Pointer register contains ++ * the address of the interrupt set register in the interrupt controller ++ * module of the local device , then the ISR for the remote interrupt must be ++ * directly registered with the Interrupt controller and must not use this API ++ * Note: this function simply installs the ISR in ICB It doesnt modify ++ * any register settings ++ */ ++int ++vlynq_install_isr(VLYNQ_DEV *pdev, ++ unsigned int map_vector, ++ VLYNQ_INTR_CNTRL_ISR isr, ++ void *arg1, void *arg2, void *arg3) ++{ ++ VLYNQ_INTR_CNTRL_ICB *entry; ++ ++ if ( (map_vector > (VLYNQ_NUM_INT_BITS-1)) || (isr == NULL) ) ++ return VLYNQ_INVALID_ARG; ++ ++ entry = &(pdev->pIntrCB[map_vector]); ++ ++ if(entry->isr == NULL) ++ { ++ entry->isr = isr; ++ entry->arg1 = arg1; ++ entry->arg2 = arg2; ++ entry->arg3 = arg3; ++ entry->next = NULL; ++ } ++ else ++ { ++ /** No more empty slots,return error */ ++ if(pdev->freelist == NULL) ++ return VLYNQ_MEMALLOC_FAIL; ++ ++ while(entry->next != NULL) ++ { ++ entry = entry->next; ++ } ++ ++ /* Append new node to the chain */ ++ entry->next = pdev->freelist; ++ /* Remove the appended node from freelist */ ++ pdev->freelist = pdev->freelist->next; ++ entry= entry->next; ++ ++ /*** Set the ICB fields ***/ ++ entry->isr = isr; ++ entry->arg1 = arg1; ++ entry->arg2 = arg2; ++ entry->arg3 = arg3; ++ entry->next = NULL; ++ } ++ ++ return VLYNQ_SUCCESS; ++} ++ ++ ++ ++/* ---------------------------------------------------------------------------- ++ * Function : vlynq_uninstall_isr ++ * Description: This function is used to uninstall a previously ++ * registered ISR. In case of shared/chained interrupts, the ++ * void * arg parameter must uniquely identify the ISR to be ++ * uninstalled. ++ * Note: this function simply uninstalls the ISR in ICB ++ * It doesnt modify any register settings ++ */ ++int ++vlynq_uninstall_isr(VLYNQ_DEV *pdev, ++ unsigned int map_vector, ++ void *arg1, void *arg2, void *arg3) ++{ ++ VLYNQ_INTR_CNTRL_ICB *entry,*temp; ++ ++ if (map_vector > (VLYNQ_NUM_INT_BITS-1)) ++ return VLYNQ_INVALID_ARG; ++ ++ entry = &(pdev->pIntrCB[map_vector]); ++ ++ if(entry->isr == NULL ) ++ return VLYNQ_ISR_NON_EXISTENT; ++ ++ if ( (entry->arg1 == arg1) && (entry->arg2 == arg2) && (entry->arg3 == arg3) ) ++ { ++ if(entry->next == NULL) ++ { ++ entry->isr=NULL; ++ return VLYNQ_SUCCESS; ++ } ++ else ++ { ++ temp = entry->next; ++ /* Copy next node in the chain to prim.slot */ ++ entry->isr = temp->isr; ++ entry->arg1 = temp->arg1; ++ entry->arg2 = temp->arg2; ++ entry->arg3 = temp->arg3; ++ entry->next = temp->next; ++ /* Free the just copied node */ ++ temp->isr = NULL; ++ temp->arg1 = NULL; ++ temp->arg2 = NULL; ++ temp->arg3 = NULL; ++ temp->next = pdev->freelist; ++ pdev->freelist = temp; ++ return VLYNQ_SUCCESS; ++ } ++ } ++ else ++ { ++ temp = entry; ++ while ( (entry = temp->next) != NULL) ++ { ++ if ( (entry->arg1 == arg1) && (entry->arg2 == arg2) && (entry->arg3 == arg3) ) ++ { ++ /* remove node from chain */ ++ temp->next = entry->next; ++ /* Add the removed node to freelist */ ++ entry->isr = NULL; ++ entry->arg1 = NULL; ++ entry->arg2 = NULL; ++ entry->arg3 = NULL; ++ entry->next = pdev->freelist; ++ entry->isrCount = 0; ++ pdev->freelist = entry; ++ return VLYNQ_SUCCESS; ++ } ++ temp = entry; ++ } ++ ++ return VLYNQ_ISR_NON_EXISTENT; ++ } ++} ++ ++ ++ ++ ++/* ---------------------------------------------------------------------------- ++ * function : vlynq_interrupt_vector_set() ++ * description:configures interrupt vector mapping,interrupt type ++ * polarity -all in one go. ++ */ ++int ++vlynq_interrupt_vector_set(VLYNQ_DEV *pdev, /* vlynq device */ ++ unsigned int int_vector, /* int vector on vlynq device */ ++ unsigned int map_vector, /* bit for this interrupt */ ++ VLYNQ_DEV_TYPE dev_type, /* local or remote device */ ++ VLYNQ_INTR_POLARITY pol, /* polarity of interrupt */ ++ VLYNQ_INTR_TYPE type) /* pulsed/level interrupt */ ++{ ++ volatile unsigned int * vecreg; ++ unsigned int val=0; ++ unsigned int bytemask=0XFF; ++ ++ /* use the lower 8 bits of val to set the value , shift it to ++ * appropriate byte position in the ivr and write it to the ++ * corresponding register */ ++ ++ /* validate the number of interrupts supported */ ++ if (int_vector >= VLYNQ_IVR_MAXIVR) ++ return VLYNQ_INVALID_ARG; ++ ++ if(map_vector > (VLYNQ_NUM_INT_BITS - 1) ) ++ return VLYNQ_INVALID_ARG; ++ ++ if (dev_type == VLYNQ_LOCAL_DVC) ++ { ++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); ++ } ++ else ++ { ++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); ++ } ++ ++ /* Update the intVector<==> bit position translation table */ ++ pdev->vector_map[map_vector] = int_vector; ++ ++ /* val has been initialised to zero. we only have to turn on appropriate bits*/ ++ if(type == VLYNQ_INTR_PULSED) ++ val |= VLYNQ_IVR_INTTYPE_MASK; ++ ++ if(pol == VLYNQ_INTR_ACTIVE_LOW) ++ val |= VLYNQ_IVR_INTPOL_MASK; ++ ++ val |= map_vector; ++ ++ /** clear the correct byte position and then or val **/ ++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) ); ++ ++ /** write to correct byte position in vecreg*/ ++ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ; ++ ++ /* Setting a interrupt vector, leaves the interrupt disabled ++ * which must be enabled subsequently */ ++ ++ return VLYNQ_SUCCESS; ++} ++ ++ ++/* ---------------------------------------------------------------------------- ++ * Function : vlynq_interrupt_vector_cntl() ++ * Description:enables/disable interrupt ++ */ ++int vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev, ++ unsigned int int_vector, ++ VLYNQ_DEV_TYPE dev_type, ++ unsigned int enable) ++{ ++ volatile unsigned int *vecReg; ++ unsigned int val=0; ++ unsigned int intenMask=0x80; ++ ++ /* validate the number of interrupts supported */ ++ if (int_vector >= VLYNQ_IVR_MAXIVR) ++ return VLYNQ_INVALID_ARG; ++ ++ if (dev_type == VLYNQ_LOCAL_DVC) ++ { ++ vecReg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); ++ } ++ else ++ { ++ vecReg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); ++ } ++ ++ /** Clear the correct byte position and then or val **/ ++ *vecReg = (*vecReg) & ( ~(intenMask << ( (int_vector %4)*8) ) ); ++ ++ if(enable) ++ { ++ val |= VLYNQ_IVR_INTEN_MASK; ++ /** Write to correct byte position in vecReg*/ ++ *vecReg = (*vecReg) | (val << ( (int_vector % 4)*8) ) ; ++ } ++ ++ return VLYNQ_SUCCESS; ++ ++}/* end of function vlynq_interrupt_vector_cntl */ ++ ++ ++ ++/* ---------------------------------------------------------------------------- ++ * Function : vlynq_interrupt_vector_map() ++ * Description:Configures interrupt vector mapping alone ++ */ ++int ++vlynq_interrupt_vector_map( VLYNQ_DEV *pdev, ++ VLYNQ_DEV_TYPE dev_type, ++ unsigned int int_vector, ++ unsigned int map_vector) ++{ ++ volatile unsigned int * vecreg; ++ unsigned int val=0; ++ unsigned int bytemask=0x1f; /* mask to turn off bits corresponding to int vector */ ++ ++ /* use the lower 8 bits of val to set the value , shift it to ++ * appropriate byte position in the ivr and write it to the ++ * corresponding register */ ++ ++ /* validate the number of interrupts supported */ ++ if (int_vector >= VLYNQ_IVR_MAXIVR) ++ return VLYNQ_INVALID_ARG; ++ ++ if(map_vector > (VLYNQ_NUM_INT_BITS - 1) ) ++ return VLYNQ_INVALID_ARG; ++ ++ if (dev_type == VLYNQ_LOCAL_DVC) ++ { ++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); ++ } ++ else ++ { ++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); ++ } ++ ++ /* Update the intVector<==> bit position translation table */ ++ pdev->vector_map[map_vector] = int_vector; ++ ++ /** val has been initialised to zero. we only have to turn on ++ * appropriate bits*/ ++ val |= map_vector; ++ ++ /** clear the correct byte position and then or val **/ ++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) ); ++ ++ /** write to correct byte position in vecreg*/ ++ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ; ++ ++ return VLYNQ_SUCCESS; ++} ++ ++ ++/* ---------------------------------------------------------------------------- ++ * function : vlynq_interrupt_set_polarity() ++ * description:configures interrupt polarity . ++ */ ++int ++vlynq_interrupt_set_polarity( VLYNQ_DEV *pdev , ++ VLYNQ_DEV_TYPE dev_type, ++ unsigned int map_vector, ++ VLYNQ_INTR_POLARITY pol) ++{ ++ volatile unsigned int * vecreg; ++ int int_vector; ++ unsigned int val=0; ++ unsigned int bytemask=0x20; /** mask to turn off bits corresponding to int polarity */ ++ ++ /* get the int_vector from map_vector */ ++ int_vector = pdev->vector_map[map_vector]; ++ ++ if(int_vector == -1) ++ return VLYNQ_INTVEC_MAP_NOT_FOUND; ++ ++ /* use the lower 8 bits of val to set the value , shift it to ++ * appropriate byte position in the ivr and write it to the ++ * corresponding register */ ++ ++ if (dev_type == VLYNQ_LOCAL_DVC) ++ { ++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); ++ } ++ else ++ { ++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); ++ } ++ ++ /* val has been initialised to zero. we only have to turn on ++ * appropriate bits, if need be*/ ++ ++ /** clear the correct byte position and then or val **/ ++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) ); ++ ++ if( pol == VLYNQ_INTR_ACTIVE_LOW) ++ { ++ val |= VLYNQ_IVR_INTPOL_MASK; ++ /** write to correct byte position in vecreg*/ ++ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ; ++ } ++ ++ return VLYNQ_SUCCESS; ++} ++ ++int vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev , ++ VLYNQ_DEV_TYPE dev_type, ++ unsigned int map_vector) ++{ ++ volatile unsigned int * vecreg; ++ int int_vector; ++ unsigned int val=0; ++ ++ /* get the int_vector from map_vector */ ++ int_vector = pdev->vector_map[map_vector]; ++ ++ if (map_vector > (VLYNQ_NUM_INT_BITS-1)) ++ return(-1); ++ ++ if(int_vector == -1) ++ return VLYNQ_INTVEC_MAP_NOT_FOUND; ++ ++ /* use the lower 8 bits of val to set the value , shift it to ++ * appropriate byte position in the ivr and write it to the ++ * corresponding register */ ++ ++ if (dev_type == VLYNQ_LOCAL_DVC) ++ { ++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); ++ } ++ else ++ { ++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); ++ } ++ ++ /** read the information into val **/ ++ val = (*vecreg) & ((VLYNQ_IVR_INTPOL_MASK << ( (int_vector %4)*8) ) ); ++ ++ return (val ? (VLYNQ_INTR_ACTIVE_LOW) : (VLYNQ_INTR_ACTIVE_HIGH)); ++} ++ ++ ++/* ---------------------------------------------------------------------------- ++ * function : vlynq_interrupt_set_type() ++ * description:configures interrupt type . ++ */ ++int vlynq_interrupt_set_type( VLYNQ_DEV *pdev, ++ VLYNQ_DEV_TYPE dev_type, ++ unsigned int map_vector, ++ VLYNQ_INTR_TYPE type) ++{ ++ volatile unsigned int * vecreg; ++ unsigned int val=0; ++ int int_vector; ++ ++ /** mask to turn off bits corresponding to interrupt type */ ++ unsigned int bytemask=0x40; ++ ++ /* get the int_vector from map_vector */ ++ int_vector = pdev->vector_map[map_vector]; ++ if(int_vector == -1) ++ return VLYNQ_INTVEC_MAP_NOT_FOUND; ++ ++ /* use the lower 8 bits of val to set the value , shift it to ++ * appropriate byte position in the ivr and write it to the ++ * corresponding register */ ++ if (dev_type == VLYNQ_LOCAL_DVC) ++ { ++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); ++ } ++ else ++ { ++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); ++ } ++ ++ /** val has been initialised to zero. we only have to turn on ++ * appropriate bits if need be*/ ++ ++ /** clear the correct byte position and then or val **/ ++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) ); ++ ++ if( type == VLYNQ_INTR_PULSED) ++ { ++ val |= VLYNQ_IVR_INTTYPE_MASK; ++ /** write to correct byte position in vecreg*/ ++ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ; ++ } ++ ++ return VLYNQ_SUCCESS; ++} ++ ++/* ---------------------------------------------------------------------------- ++ * function : vlynq_interrupt_get_type() ++ * description:returns interrupt type . ++ */ ++int vlynq_interrupt_get_type( VLYNQ_DEV *pdev, VLYNQ_DEV_TYPE dev_type, ++ unsigned int map_vector) ++{ ++ volatile unsigned int * vecreg; ++ unsigned int val=0; ++ int int_vector; ++ ++ if (map_vector > (VLYNQ_NUM_INT_BITS-1)) ++ return(-1); ++ ++ /* get the int_vector from map_vector */ ++ int_vector = pdev->vector_map[map_vector]; ++ if(int_vector == -1) ++ return VLYNQ_INTVEC_MAP_NOT_FOUND; ++ ++ /* use the lower 8 bits of val to set the value , shift it to ++ * appropriate byte position in the ivr and write it to the ++ * corresponding register */ ++ if (dev_type == VLYNQ_LOCAL_DVC) ++ { ++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); ++ } ++ else ++ { ++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); ++ } ++ ++ /** Read the correct bit position into val **/ ++ val = (*vecreg) & ((VLYNQ_IVR_INTTYPE_MASK << ( (int_vector %4)*8) ) ); ++ ++ return (val ? (VLYNQ_INTR_PULSED) : (VLYNQ_INTR_LEVEL)); ++} ++ ++/* ---------------------------------------------------------------------------- ++ * function : vlynq_interrupt_enable() ++ * description:Enable interrupt by writing to IVR register. ++ */ ++int vlynq_interrupt_enable( VLYNQ_DEV *pdev, ++ VLYNQ_DEV_TYPE dev_type, ++ unsigned int map_vector) ++{ ++ volatile unsigned int * vecreg; ++ unsigned int val=0; ++ int int_vector; ++ ++ /** mask to turn off bits corresponding to interrupt enable */ ++ unsigned int bytemask=0x80; ++ ++ /* get the int_vector from map_vector */ ++ int_vector = pdev->vector_map[map_vector]; ++ if(int_vector == -1) ++ return VLYNQ_INTVEC_MAP_NOT_FOUND; ++ ++ /* use the lower 8 bits of val to set the value , shift it to ++ * appropriate byte position in the ivr and write it to the ++ * corresponding register */ ++ ++ if (dev_type == VLYNQ_LOCAL_DVC) ++ { ++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); ++ } ++ else ++ { ++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); ++ } ++ ++ /** val has been initialised to zero. we only have to turn on ++ * bit corresponding to interrupt enable*/ ++ val |= VLYNQ_IVR_INTEN_MASK; ++ ++ /** clear the correct byte position and then or val **/ ++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) ); ++ ++ /** write to correct byte position in vecreg*/ ++ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ; ++ ++ return VLYNQ_SUCCESS; ++} ++ ++ ++/* ---------------------------------------------------------------------------- ++ * function : vlynq_interrupt_disable() ++ * description:Disable interrupt by writing to IVR register. ++ */ ++int ++vlynq_interrupt_disable( VLYNQ_DEV *pdev, ++ VLYNQ_DEV_TYPE dev_type, ++ unsigned int map_vector) ++{ ++ volatile unsigned int * vecreg; ++ int int_vector; ++ ++ /** mask to turn off bits corresponding to interrupt enable */ ++ unsigned int bytemask=0x80; ++ ++ /* get the int_vector from map_vector */ ++ int_vector = pdev->vector_map[map_vector]; ++ if(int_vector == -1) ++ return VLYNQ_INTVEC_MAP_NOT_FOUND; ++ ++ /* use the lower 8 bits of val to set the value , shift it to ++ * appropriate byte position in the ivr and write it to the ++ * corresponding register */ ++ if (dev_type == VLYNQ_LOCAL_DVC) ++ { ++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); ++ } ++ else ++ { ++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); ++ } ++ ++ /* We disable the interrupt by simply turning off the bit ++ * corresponding to Interrupt enable. ++ * Clear the interrupt enable bit in the correct byte position **/ ++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) ); ++ ++ /* Dont have to set any bit positions */ ++ ++ return VLYNQ_SUCCESS; ++ ++} ++ ++ ++ ++ diff -urN linux.old/drivers/char/serial.c linux.dev/drivers/char/serial.c ---- linux.old/drivers/char/serial.c 2005-07-10 03:00:44.000000000 +0200 -+++ linux.dev/drivers/char/serial.c 2005-08-12 19:32:05.147223992 +0200 +--- linux.old/drivers/char/serial.c 2005-10-21 16:43:20.709226000 +0200 ++++ linux.dev/drivers/char/serial.c 2005-10-21 16:45:42.166066500 +0200 @@ -419,7 +419,40 @@ return 0; } @@ -3677,7 +6439,7 @@ diff -urN linux.old/drivers/char/serial.c linux.dev/drivers/char/serial.c } /* If the quotient is zero refuse the change */ if (!quot && old_termios) { -@@ -5552,8 +5595,10 @@ +@@ -5540,8 +5583,10 @@ state->irq = irq_cannonicalize(state->irq); if (state->hub6) state->io_type = SERIAL_IO_HUB6; @@ -3688,7 +6450,7 @@ diff -urN linux.old/drivers/char/serial.c linux.dev/drivers/char/serial.c #ifdef CONFIG_MCA if ((state->flags & ASYNC_BOOT_ONLYMCA) && !MCA_bus) continue; -@@ -6009,7 +6054,15 @@ +@@ -5997,7 +6042,15 @@ info->io_type = state->io_type; info->iomem_base = state->iomem_base; info->iomem_reg_shift = state->iomem_reg_shift; @@ -3704,9 +6466,6183 @@ diff -urN linux.old/drivers/char/serial.c linux.dev/drivers/char/serial.c cval = cflag & (CSIZE | CSTOPB); #if defined(__powerpc__) || defined(__alpha__) cval >>= 8; +diff -urN linux.old/drivers/char/serial.c.orig linux.dev/drivers/char/serial.c.orig +--- linux.old/drivers/char/serial.c.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/drivers/char/serial.c.orig 2005-10-21 16:43:20.709226000 +0200 +@@ -0,0 +1,6054 @@ ++/* ++ * linux/drivers/char/serial.c ++ * ++ * Copyright (C) 1991, 1992 Linus Torvalds ++ * Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, ++ * 1998, 1999 Theodore Ts'o ++ * ++ * Extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92. Now ++ * much more extensible to support other serial cards based on the ++ * 16450/16550A UART's. Added support for the AST FourPort and the ++ * Accent Async board. ++ * ++ * set_serial_info fixed to set the flags, custom divisor, and uart ++ * type fields. Fix suggested by Michael K. Johnson 12/12/92. ++ * ++ * 11/95: TIOCMIWAIT, TIOCGICOUNT by Angelo Haritsis ++ * ++ * 03/96: Modularised by Angelo Haritsis ++ * ++ * rs_set_termios fixed to look also for changes of the input ++ * flags INPCK, BRKINT, PARMRK, IGNPAR and IGNBRK. ++ * Bernd Anhäupl 05/17/96. ++ * ++ * 1/97: Extended dumb serial ports are a config option now. ++ * Saves 4k. Michael A. Griffith ++ * ++ * 8/97: Fix bug in rs_set_termios with RTS ++ * Stanislav V. Voronyi ++ * ++ * 3/98: Change the IRQ detection, use of probe_irq_o*(), ++ * suppress TIOCSERGWILD and TIOCSERSWILD ++ * Etienne Lorrain ++ * ++ * 4/98: Added changes to support the ARM architecture proposed by ++ * Russell King ++ * ++ * 5/99: Updated to include support for the XR16C850 and ST16C654 ++ * uarts. Stuart MacDonald ++ * ++ * 8/99: Generalized PCI support added. Theodore Ts'o ++ * ++ * 3/00: Rid circular buffer of redundant xmit_cnt. Fix a ++ * few races on freeing buffers too. ++ * Alan Modra ++ * ++ * 5/00: Support for the RSA-DV II/S card added. ++ * Kiyokazu SUTO ++ * ++ * 6/00: Remove old-style timer, use timer_list ++ * Andrew Morton ++ * ++ * 7/00: Support Timedia/Sunix/Exsys PCI cards ++ * ++ * 7/00: fix some returns on failure not using MOD_DEC_USE_COUNT. ++ * Arnaldo Carvalho de Melo ++ * ++ * 10/00: add in optional software flow control for serial console. ++ * Kanoj Sarcar (Modified by Theodore Ts'o) ++ * ++ * 02/02: Fix for AMD Elan bug in transmit irq routine, by ++ * Christer Weinigel , ++ * Robert Schwebel , ++ * Juergen Beisert , ++ * Theodore Ts'o ++ * ++ * 10/00: Added suport for MIPS Atlas board. ++ * 11/00: Hooks for serial kernel debug port support added. ++ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, ++ * carstenl@mips.com ++ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. ++ */ ++ ++static char *serial_version = "5.05c"; ++static char *serial_revdate = "2001-07-08"; ++ ++/* ++ * Serial driver configuration section. Here are the various options: ++ * ++ * CONFIG_HUB6 ++ * Enables support for the venerable Bell Technologies ++ * HUB6 card. ++ * ++ * CONFIG_SERIAL_MANY_PORTS ++ * Enables support for ports beyond the standard, stupid ++ * COM 1/2/3/4. ++ * ++ * CONFIG_SERIAL_MULTIPORT ++ * Enables support for special multiport board support. ++ * ++ * CONFIG_SERIAL_SHARE_IRQ ++ * Enables support for multiple serial ports on one IRQ ++ * ++ * CONFIG_SERIAL_DETECT_IRQ ++ * Enable the autodetection of IRQ on standart ports ++ * ++ * SERIAL_PARANOIA_CHECK ++ * Check the magic number for the async_structure where ++ * ever possible. ++ * ++ * CONFIG_SERIAL_ACPI ++ * Enable support for serial console port and serial ++ * debug port as defined by the SPCR and DBGP tables in ++ * ACPI 2.0. ++ */ ++ ++#include ++#include ++ ++#undef SERIAL_PARANOIA_CHECK ++#define CONFIG_SERIAL_NOPAUSE_IO ++#define SERIAL_DO_RESTART ++ ++#if 0 ++/* These defines are normally controlled by the autoconf.h */ ++#define CONFIG_SERIAL_MANY_PORTS ++#define CONFIG_SERIAL_SHARE_IRQ ++#define CONFIG_SERIAL_DETECT_IRQ ++#define CONFIG_SERIAL_MULTIPORT ++#define CONFIG_HUB6 ++#endif ++ ++#ifdef CONFIG_PCI ++#define ENABLE_SERIAL_PCI ++#ifndef CONFIG_SERIAL_SHARE_IRQ ++#define CONFIG_SERIAL_SHARE_IRQ ++#endif ++#ifndef CONFIG_SERIAL_MANY_PORTS ++#define CONFIG_SERIAL_MANY_PORTS ++#endif ++#endif ++ ++#ifdef CONFIG_SERIAL_ACPI ++#define ENABLE_SERIAL_ACPI ++#endif ++ ++#if defined(CONFIG_ISAPNP)|| (defined(CONFIG_ISAPNP_MODULE) && defined(MODULE)) ++#ifndef ENABLE_SERIAL_PNP ++#define ENABLE_SERIAL_PNP ++#endif ++#endif ++ ++/* Set of debugging defines */ ++ ++#undef SERIAL_DEBUG_INTR ++#undef SERIAL_DEBUG_OPEN ++#undef SERIAL_DEBUG_FLOW ++#undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT ++#undef SERIAL_DEBUG_PCI ++#undef SERIAL_DEBUG_AUTOCONF ++ ++/* Sanity checks */ ++ ++#ifdef CONFIG_SERIAL_MULTIPORT ++#ifndef CONFIG_SERIAL_SHARE_IRQ ++#define CONFIG_SERIAL_SHARE_IRQ ++#endif ++#endif ++ ++#ifdef CONFIG_HUB6 ++#ifndef CONFIG_SERIAL_MANY_PORTS ++#define CONFIG_SERIAL_MANY_PORTS ++#endif ++#ifndef CONFIG_SERIAL_SHARE_IRQ ++#define CONFIG_SERIAL_SHARE_IRQ ++#endif ++#endif ++ ++#ifdef MODULE ++#undef CONFIG_SERIAL_CONSOLE ++#endif ++ ++#define CONFIG_SERIAL_RSA ++ ++#define RS_STROBE_TIME (10*HZ) ++#define RS_ISR_PASS_LIMIT 256 ++ ++#if defined(__i386__) && (defined(CONFIG_M386) || defined(CONFIG_M486)) ++#define SERIAL_INLINE ++#endif ++ ++/* ++ * End of serial driver configuration section. ++ */ ++ ++#include ++ ++#include ++#ifdef LOCAL_HEADERS ++#include "serial_local.h" ++#else ++#include ++#include ++#include ++#include ++#define LOCAL_VERSTRING "" ++#endif ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#if (LINUX_VERSION_CODE >= 131343) ++#include ++#endif ++#if (LINUX_VERSION_CODE >= 131336) ++#include ++#endif ++#include ++#ifdef CONFIG_SERIAL_CONSOLE ++#include ++#endif ++#ifdef ENABLE_SERIAL_PCI ++#include ++#endif ++#ifdef ENABLE_SERIAL_PNP ++#include ++#endif ++#ifdef CONFIG_MAGIC_SYSRQ ++#include ++#endif ++ ++/* ++ * All of the compatibilty code so we can compile serial.c against ++ * older kernels is hidden in serial_compat.h ++ */ ++#if defined(LOCAL_HEADERS) || (LINUX_VERSION_CODE < 0x020317) /* 2.3.23 */ ++#include "serial_compat.h" ++#endif ++ ++#include ++#include ++#include ++#include ++ ++#if defined(CONFIG_MAC_SERIAL) ++#define SERIAL_DEV_OFFSET ((_machine == _MACH_prep || _machine == _MACH_chrp) ? 0 : 2) ++#else ++#define SERIAL_DEV_OFFSET 0 ++#endif ++ ++#ifdef SERIAL_INLINE ++#define _INLINE_ inline ++#else ++#define _INLINE_ ++#endif ++ ++static char *serial_name = "Serial driver"; ++ ++static DECLARE_TASK_QUEUE(tq_serial); ++ ++static struct tty_driver serial_driver, callout_driver; ++static int serial_refcount; ++ ++static struct timer_list serial_timer; ++ ++/* serial subtype definitions */ ++#ifndef SERIAL_TYPE_NORMAL ++#define SERIAL_TYPE_NORMAL 1 ++#define SERIAL_TYPE_CALLOUT 2 ++#endif ++ ++/* number of characters left in xmit buffer before we ask for more */ ++#define WAKEUP_CHARS 256 ++ ++/* ++ * IRQ_timeout - How long the timeout should be for each IRQ ++ * should be after the IRQ has been active. ++ */ ++ ++static struct async_struct *IRQ_ports[NR_IRQS]; ++#ifdef CONFIG_SERIAL_MULTIPORT ++static struct rs_multiport_struct rs_multiport[NR_IRQS]; ++#endif ++static int IRQ_timeout[NR_IRQS]; ++#ifdef CONFIG_SERIAL_CONSOLE ++static struct console sercons; ++static int lsr_break_flag; ++#endif ++#if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) ++static unsigned long break_pressed; /* break, really ... */ ++#endif ++ ++static unsigned detect_uart_irq (struct serial_state * state); ++static void autoconfig(struct serial_state * state); ++static void change_speed(struct async_struct *info, struct termios *old); ++static void rs_wait_until_sent(struct tty_struct *tty, int timeout); ++ ++/* ++ * Here we define the default xmit fifo size used for each type of ++ * UART ++ */ ++static struct serial_uart_config uart_config[] = { ++ { "unknown", 1, 0 }, ++ { "8250", 1, 0 }, ++ { "16450", 1, 0 }, ++ { "16550", 1, 0 }, ++ { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO }, ++ { "cirrus", 1, 0 }, /* usurped by cyclades.c */ ++ { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH }, ++ { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO | ++ UART_STARTECH }, ++ { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO}, ++ { "Startech", 1, 0}, /* usurped by cyclades.c */ ++ { "16C950/954", 128, UART_CLEAR_FIFO | UART_USE_FIFO}, ++ { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO | ++ UART_STARTECH }, ++ { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO | ++ UART_STARTECH }, ++ { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO }, ++ { 0, 0} ++}; ++ ++#if defined(CONFIG_SERIAL_RSA) && defined(MODULE) ++ ++#define PORT_RSA_MAX 4 ++static int probe_rsa[PORT_RSA_MAX]; ++static int force_rsa[PORT_RSA_MAX]; ++ ++MODULE_PARM(probe_rsa, "1-" __MODULE_STRING(PORT_RSA_MAX) "i"); ++MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); ++MODULE_PARM(force_rsa, "1-" __MODULE_STRING(PORT_RSA_MAX) "i"); ++MODULE_PARM_DESC(force_rsa, "Force I/O ports for RSA"); ++#endif /* CONFIG_SERIAL_RSA */ ++ ++struct serial_state rs_table[RS_TABLE_SIZE] = { ++ SERIAL_PORT_DFNS /* Defined in serial.h */ ++}; ++ ++#define NR_PORTS (sizeof(rs_table)/sizeof(struct serial_state)) ++int serial_nr_ports = NR_PORTS; ++ ++#if (defined(ENABLE_SERIAL_PCI) || defined(ENABLE_SERIAL_PNP)) ++#define NR_PCI_BOARDS 8 ++ ++static struct pci_board_inst serial_pci_board[NR_PCI_BOARDS]; ++ ++#ifndef IS_PCI_REGION_IOPORT ++#define IS_PCI_REGION_IOPORT(dev, r) (pci_resource_flags((dev), (r)) & \ ++ IORESOURCE_IO) ++#endif ++#ifndef IS_PCI_REGION_IOMEM ++#define IS_PCI_REGION_IOMEM(dev, r) (pci_resource_flags((dev), (r)) & \ ++ IORESOURCE_MEM) ++#endif ++#ifndef PCI_IRQ_RESOURCE ++#define PCI_IRQ_RESOURCE(dev, r) ((dev)->irq_resource[r].start) ++#endif ++#ifndef pci_get_subvendor ++#define pci_get_subvendor(dev) ((dev)->subsystem_vendor) ++#define pci_get_subdevice(dev) ((dev)->subsystem_device) ++#endif ++#endif /* ENABLE_SERIAL_PCI || ENABLE_SERIAL_PNP */ ++ ++#ifndef PREPARE_FUNC ++#define PREPARE_FUNC(dev) (dev->prepare) ++#define ACTIVATE_FUNC(dev) (dev->activate) ++#define DEACTIVATE_FUNC(dev) (dev->deactivate) ++#endif ++ ++#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) ++ ++static struct tty_struct *serial_table[NR_PORTS]; ++static struct termios *serial_termios[NR_PORTS]; ++static struct termios *serial_termios_locked[NR_PORTS]; ++ ++ ++#if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT) ++#define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \ ++ kdevname(tty->device), (info->flags), serial_refcount,info->count,tty->count,s) ++#else ++#define DBG_CNT(s) ++#endif ++ ++/* ++ * tmp_buf is used as a temporary buffer by serial_write. We need to ++ * lock it in case the copy_from_user blocks while swapping in a page, ++ * and some other program tries to do a serial write at the same time. ++ * Since the lock will only come under contention when the system is ++ * swapping and available memory is low, it makes sense to share one ++ * buffer across all the serial ports, since it significantly saves ++ * memory if large numbers of serial ports are open. ++ */ ++static unsigned char *tmp_buf; ++#ifdef DECLARE_MUTEX ++static DECLARE_MUTEX(tmp_buf_sem); ++#else ++static struct semaphore tmp_buf_sem = MUTEX; ++#endif ++ ++ ++static inline int serial_paranoia_check(struct async_struct *info, ++ kdev_t device, const char *routine) ++{ ++#ifdef SERIAL_PARANOIA_CHECK ++ static const char *badmagic = ++ "Warning: bad magic number for serial struct (%s) in %s\n"; ++ static const char *badinfo = ++ "Warning: null async_struct for (%s) in %s\n"; ++ ++ if (!info) { ++ printk(badinfo, kdevname(device), routine); ++ return 1; ++ } ++ if (info->magic != SERIAL_MAGIC) { ++ printk(badmagic, kdevname(device), routine); ++ return 1; ++ } ++#endif ++ return 0; ++} ++ ++#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD) ++ ++#include ++ ++static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset) ++{ ++ return (*(volatile unsigned int *)(mips_io_port_base + ATLAS_UART_REGS_BASE + offset*8) & 0xff); ++} ++ ++static _INLINE_ void serial_out(struct async_struct *info, int offset, int value) ++{ ++ *(volatile unsigned int *)(mips_io_port_base + ATLAS_UART_REGS_BASE + offset*8) = value; ++} ++ ++#else ++ ++static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset) ++{ ++ switch (info->io_type) { ++#ifdef CONFIG_HUB6 ++ case SERIAL_IO_HUB6: ++ outb(info->hub6 - 1 + offset, info->port); ++ return inb(info->port+1); ++#endif ++ case SERIAL_IO_MEM: ++ return readb((unsigned long) info->iomem_base + ++ (offset<iomem_reg_shift)); ++ default: ++ return inb(info->port + offset); ++ } ++} ++ ++static _INLINE_ void serial_out(struct async_struct *info, int offset, ++ int value) ++{ ++ switch (info->io_type) { ++#ifdef CONFIG_HUB6 ++ case SERIAL_IO_HUB6: ++ outb(info->hub6 - 1 + offset, info->port); ++ outb(value, info->port+1); ++ break; ++#endif ++ case SERIAL_IO_MEM: ++ writeb(value, (unsigned long) info->iomem_base + ++ (offset<iomem_reg_shift)); ++ break; ++ default: ++ outb(value, info->port+offset); ++ } ++} ++#endif ++ ++ ++/* ++ * We used to support using pause I/O for certain machines. We ++ * haven't supported this for a while, but just in case it's badly ++ * needed for certain old 386 machines, I've left these #define's ++ * in.... ++ */ ++#define serial_inp(info, offset) serial_in(info, offset) ++#define serial_outp(info, offset, value) serial_out(info, offset, value) ++ ++ ++/* ++ * For the 16C950 ++ */ ++void serial_icr_write(struct async_struct *info, int offset, int value) ++{ ++ serial_out(info, UART_SCR, offset); ++ serial_out(info, UART_ICR, value); ++} ++ ++unsigned int serial_icr_read(struct async_struct *info, int offset) ++{ ++ int value; ++ ++ serial_icr_write(info, UART_ACR, info->ACR | UART_ACR_ICRRD); ++ serial_out(info, UART_SCR, offset); ++ value = serial_in(info, UART_ICR); ++ serial_icr_write(info, UART_ACR, info->ACR); ++ return value; ++} ++ ++/* ++ * ------------------------------------------------------------ ++ * rs_stop() and rs_start() ++ * ++ * This routines are called before setting or resetting tty->stopped. ++ * They enable or disable transmitter interrupts, as necessary. ++ * ------------------------------------------------------------ ++ */ ++static void rs_stop(struct tty_struct *tty) ++{ ++ struct async_struct *info = (struct async_struct *)tty->driver_data; ++ unsigned long flags; ++ ++ if (serial_paranoia_check(info, tty->device, "rs_stop")) ++ return; ++ ++ save_flags(flags); cli(); ++ if (info->IER & UART_IER_THRI) { ++ info->IER &= ~UART_IER_THRI; ++ serial_out(info, UART_IER, info->IER); ++ } ++ if (info->state->type == PORT_16C950) { ++ info->ACR |= UART_ACR_TXDIS; ++ serial_icr_write(info, UART_ACR, info->ACR); ++ } ++ restore_flags(flags); ++} ++ ++static void rs_start(struct tty_struct *tty) ++{ ++ struct async_struct *info = (struct async_struct *)tty->driver_data; ++ unsigned long flags; ++ ++ if (serial_paranoia_check(info, tty->device, "rs_start")) ++ return; ++ ++ save_flags(flags); cli(); ++ if (info->xmit.head != info->xmit.tail ++ && info->xmit.buf ++ && !(info->IER & UART_IER_THRI)) { ++ info->IER |= UART_IER_THRI; ++ serial_out(info, UART_IER, info->IER); ++ } ++ if (info->state->type == PORT_16C950) { ++ info->ACR &= ~UART_ACR_TXDIS; ++ serial_icr_write(info, UART_ACR, info->ACR); ++ } ++ restore_flags(flags); ++} ++ ++/* ++ * ---------------------------------------------------------------------- ++ * ++ * Here starts the interrupt handling routines. All of the following ++ * subroutines are declared as inline and are folded into ++ * rs_interrupt(). They were separated out for readability's sake. ++ * ++ * Note: rs_interrupt() is a "fast" interrupt, which means that it ++ * runs with interrupts turned off. People who may want to modify ++ * rs_interrupt() should try to keep the interrupt handler as fast as ++ * possible. After you are done making modifications, it is not a bad ++ * idea to do: ++ * ++ * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c ++ * ++ * and look at the resulting assemble code in serial.s. ++ * ++ * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 ++ * ----------------------------------------------------------------------- ++ */ ++ ++/* ++ * This routine is used by the interrupt handler to schedule ++ * processing in the software interrupt portion of the driver. ++ */ ++static _INLINE_ void rs_sched_event(struct async_struct *info, ++ int event) ++{ ++ info->event |= 1 << event; ++ queue_task(&info->tqueue, &tq_serial); ++ mark_bh(SERIAL_BH); ++} ++ ++static _INLINE_ void receive_chars(struct async_struct *info, ++ int *status, struct pt_regs * regs) ++{ ++ struct tty_struct *tty = info->tty; ++ unsigned char ch; ++ struct async_icount *icount; ++ int max_count = 256; ++ ++ icount = &info->state->icount; ++ do { ++ if (tty->flip.count >= TTY_FLIPBUF_SIZE) { ++ tty->flip.tqueue.routine((void *) tty); ++ if (tty->flip.count >= TTY_FLIPBUF_SIZE) { ++ /* no room in flip buffer, discard rx FIFO contents to clear IRQ ++ * *FIXME* Hardware with auto flow control ++ * would benefit from leaving the data in the FIFO and ++ * disabling the rx IRQ until space becomes available. ++ */ ++ do { ++ serial_inp(info, UART_RX); ++ icount->overrun++; ++ *status = serial_inp(info, UART_LSR); ++ } while ((*status & UART_LSR_DR) && (max_count-- > 0)); ++ return; // if TTY_DONT_FLIP is set ++ } ++ } ++ ch = serial_inp(info, UART_RX); ++ *tty->flip.char_buf_ptr = ch; ++ icount->rx++; ++ ++#ifdef SERIAL_DEBUG_INTR ++ printk("DR%02x:%02x...", ch, *status); ++#endif ++ *tty->flip.flag_buf_ptr = 0; ++ if (*status & (UART_LSR_BI | UART_LSR_PE | ++ UART_LSR_FE | UART_LSR_OE)) { ++ /* ++ * For statistics only ++ */ ++ if (*status & UART_LSR_BI) { ++ *status &= ~(UART_LSR_FE | UART_LSR_PE); ++ icount->brk++; ++ /* ++ * We do the SysRQ and SAK checking ++ * here because otherwise the break ++ * may get masked by ignore_status_mask ++ * or read_status_mask. ++ */ ++#if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) ++ if (info->line == sercons.index) { ++ if (!break_pressed) { ++ break_pressed = jiffies; ++ goto ignore_char; ++ } ++ break_pressed = 0; ++ } ++#endif ++ if (info->flags & ASYNC_SAK) ++ do_SAK(tty); ++ } else if (*status & UART_LSR_PE) ++ icount->parity++; ++ else if (*status & UART_LSR_FE) ++ icount->frame++; ++ if (*status & UART_LSR_OE) ++ icount->overrun++; ++ ++ /* ++ * Mask off conditions which should be ignored. ++ */ ++ *status &= info->read_status_mask; ++ ++#ifdef CONFIG_SERIAL_CONSOLE ++ if (info->line == sercons.index) { ++ /* Recover the break flag from console xmit */ ++ *status |= lsr_break_flag; ++ lsr_break_flag = 0; ++ } ++#endif ++ if (*status & (UART_LSR_BI)) { ++#ifdef SERIAL_DEBUG_INTR ++ printk("handling break...."); ++#endif ++ *tty->flip.flag_buf_ptr = TTY_BREAK; ++ } else if (*status & UART_LSR_PE) ++ *tty->flip.flag_buf_ptr = TTY_PARITY; ++ else if (*status & UART_LSR_FE) ++ *tty->flip.flag_buf_ptr = TTY_FRAME; ++ } ++#if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) ++ if (break_pressed && info->line == sercons.index) { ++ if (ch != 0 && ++ time_before(jiffies, break_pressed + HZ*5)) { ++ handle_sysrq(ch, regs, NULL, NULL); ++ break_pressed = 0; ++ goto ignore_char; ++ } ++ break_pressed = 0; ++ } ++#endif ++ if ((*status & info->ignore_status_mask) == 0) { ++ tty->flip.flag_buf_ptr++; ++ tty->flip.char_buf_ptr++; ++ tty->flip.count++; ++ } ++ if ((*status & UART_LSR_OE) && ++ (tty->flip.count < TTY_FLIPBUF_SIZE)) { ++ /* ++ * Overrun is special, since it's reported ++ * immediately, and doesn't affect the current ++ * character ++ */ ++ *tty->flip.flag_buf_ptr = TTY_OVERRUN; ++ tty->flip.count++; ++ tty->flip.flag_buf_ptr++; ++ tty->flip.char_buf_ptr++; ++ } ++#if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) ++ ignore_char: ++#endif ++ *status = serial_inp(info, UART_LSR); ++ } while ((*status & UART_LSR_DR) && (max_count-- > 0)); ++#if (LINUX_VERSION_CODE > 131394) /* 2.1.66 */ ++ tty_flip_buffer_push(tty); ++#else ++ queue_task_irq_off(&tty->flip.tqueue, &tq_timer); ++#endif ++} ++ ++static _INLINE_ void transmit_chars(struct async_struct *info, int *intr_done) ++{ ++ int count; ++ ++ if (info->x_char) { ++ serial_outp(info, UART_TX, info->x_char); ++ info->state->icount.tx++; ++ info->x_char = 0; ++ if (intr_done) ++ *intr_done = 0; ++ return; ++ } ++ if (info->xmit.head == info->xmit.tail ++ || info->tty->stopped ++ || info->tty->hw_stopped) { ++ info->IER &= ~UART_IER_THRI; ++ serial_out(info, UART_IER, info->IER); ++ return; ++ } ++ ++ count = info->xmit_fifo_size; ++ do { ++ serial_out(info, UART_TX, info->xmit.buf[info->xmit.tail]); ++ info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1); ++ info->state->icount.tx++; ++ if (info->xmit.head == info->xmit.tail) ++ break; ++ } while (--count > 0); ++ ++ if (CIRC_CNT(info->xmit.head, ++ info->xmit.tail, ++ SERIAL_XMIT_SIZE) < WAKEUP_CHARS) ++ rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); ++ ++#ifdef SERIAL_DEBUG_INTR ++ printk("THRE..."); ++#endif ++ if (intr_done) ++ *intr_done = 0; ++ ++ if (info->xmit.head == info->xmit.tail) { ++ info->IER &= ~UART_IER_THRI; ++ serial_out(info, UART_IER, info->IER); ++ } ++} ++ ++static _INLINE_ void check_modem_status(struct async_struct *info) ++{ ++ int status; ++ struct async_icount *icount; ++ ++ status = serial_in(info, UART_MSR); ++ ++ if (status & UART_MSR_ANY_DELTA) { ++ icount = &info->state->icount; ++ /* update input line counters */ ++ if (status & UART_MSR_TERI) ++ icount->rng++; ++ if (status & UART_MSR_DDSR) ++ icount->dsr++; ++ if (status & UART_MSR_DDCD) { ++ icount->dcd++; ++#ifdef CONFIG_HARD_PPS ++ if ((info->flags & ASYNC_HARDPPS_CD) && ++ (status & UART_MSR_DCD)) ++ hardpps(); ++#endif ++ } ++ if (status & UART_MSR_DCTS) ++ icount->cts++; ++ wake_up_interruptible(&info->delta_msr_wait); ++ } ++ ++ if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { ++#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR)) ++ printk("ttys%d CD now %s...", info->line, ++ (status & UART_MSR_DCD) ? "on" : "off"); ++#endif ++ if (status & UART_MSR_DCD) ++ wake_up_interruptible(&info->open_wait); ++ else if (!((info->flags & ASYNC_CALLOUT_ACTIVE) && ++ (info->flags & ASYNC_CALLOUT_NOHUP))) { ++#ifdef SERIAL_DEBUG_OPEN ++ printk("doing serial hangup..."); ++#endif ++ if (info->tty) ++ tty_hangup(info->tty); ++ } ++ } ++ if (info->flags & ASYNC_CTS_FLOW) { ++ if (info->tty->hw_stopped) { ++ if (status & UART_MSR_CTS) { ++#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) ++ printk("CTS tx start..."); ++#endif ++ info->tty->hw_stopped = 0; ++ info->IER |= UART_IER_THRI; ++ serial_out(info, UART_IER, info->IER); ++ rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); ++ return; ++ } ++ } else { ++ if (!(status & UART_MSR_CTS)) { ++#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) ++ printk("CTS tx stop..."); ++#endif ++ info->tty->hw_stopped = 1; ++ info->IER &= ~UART_IER_THRI; ++ serial_out(info, UART_IER, info->IER); ++ } ++ } ++ } ++} ++ ++#ifdef CONFIG_SERIAL_SHARE_IRQ ++/* ++ * This is the serial driver's generic interrupt routine ++ */ ++static void rs_interrupt(int irq, void *dev_id, struct pt_regs * regs) ++{ ++ int status, iir; ++ struct async_struct * info; ++ int pass_counter = 0; ++ struct async_struct *end_mark = 0; ++#ifdef CONFIG_SERIAL_MULTIPORT ++ int first_multi = 0; ++ struct rs_multiport_struct *multi; ++#endif ++ ++#ifdef SERIAL_DEBUG_INTR ++ printk("rs_interrupt(%d)...", irq); ++#endif ++ ++ info = IRQ_ports[irq]; ++ if (!info) ++ return; ++ ++#ifdef CONFIG_SERIAL_MULTIPORT ++ multi = &rs_multiport[irq]; ++ if (multi->port_monitor) ++ first_multi = inb(multi->port_monitor); ++#endif ++ ++ do { ++ if (!info->tty || ++ ((iir=serial_in(info, UART_IIR)) & UART_IIR_NO_INT)) { ++ if (!end_mark) ++ end_mark = info; ++ goto next; ++ } ++#ifdef SERIAL_DEBUG_INTR ++ printk("IIR = %x...", serial_in(info, UART_IIR)); ++#endif ++ end_mark = 0; ++ ++ info->last_active = jiffies; ++ ++ status = serial_inp(info, UART_LSR); ++#ifdef SERIAL_DEBUG_INTR ++ printk("status = %x...", status); ++#endif ++ if (status & UART_LSR_DR) ++ receive_chars(info, &status, regs); ++ check_modem_status(info); ++#ifdef CONFIG_MELAN ++ if ((status & UART_LSR_THRE) || ++ /* for buggy ELAN processors */ ++ ((iir & UART_IIR_ID) == UART_IIR_THRI)) ++ transmit_chars(info, 0); ++#else ++ if (status & UART_LSR_THRE) ++ transmit_chars(info, 0); ++#endif ++ ++ next: ++ info = info->next_port; ++ if (!info) { ++ info = IRQ_ports[irq]; ++ if (pass_counter++ > RS_ISR_PASS_LIMIT) { ++#if 0 ++ printk("rs loop break\n"); ++#endif ++ break; /* Prevent infinite loops */ ++ } ++ continue; ++ } ++ } while (end_mark != info); ++#ifdef CONFIG_SERIAL_MULTIPORT ++ if (multi->port_monitor) ++ printk("rs port monitor (normal) irq %d: 0x%x, 0x%x\n", ++ info->state->irq, first_multi, ++ inb(multi->port_monitor)); ++#endif ++#ifdef SERIAL_DEBUG_INTR ++ printk("end.\n"); ++#endif ++} ++#endif /* #ifdef CONFIG_SERIAL_SHARE_IRQ */ ++ ++ ++/* ++ * This is the serial driver's interrupt routine for a single port ++ */ ++static void rs_interrupt_single(int irq, void *dev_id, struct pt_regs * regs) ++{ ++ int status, iir; ++ int pass_counter = 0; ++ struct async_struct * info; ++#ifdef CONFIG_SERIAL_MULTIPORT ++ int first_multi = 0; ++ struct rs_multiport_struct *multi; ++#endif ++ ++#ifdef SERIAL_DEBUG_INTR ++ printk("rs_interrupt_single(%d)...", irq); ++#endif ++ ++ info = IRQ_ports[irq]; ++ if (!info || !info->tty) ++ return; ++ ++#ifdef CONFIG_SERIAL_MULTIPORT ++ multi = &rs_multiport[irq]; ++ if (multi->port_monitor) ++ first_multi = inb(multi->port_monitor); ++#endif ++ ++ iir = serial_in(info, UART_IIR); ++ do { ++ status = serial_inp(info, UART_LSR); ++#ifdef SERIAL_DEBUG_INTR ++ printk("status = %x...", status); ++#endif ++ if (status & UART_LSR_DR) ++ receive_chars(info, &status, regs); ++ check_modem_status(info); ++#ifdef CONFIG_MELAN ++ if ((status & UART_LSR_THRE) || ++ /* For buggy ELAN processors */ ++ ((iir & UART_IIR_ID) == UART_IIR_THRI)) ++ transmit_chars(info, 0); ++#else ++ if (status & UART_LSR_THRE) ++ transmit_chars(info, 0); ++#endif ++ if (pass_counter++ > RS_ISR_PASS_LIMIT) { ++#if SERIAL_DEBUG_INTR ++ printk("rs_single loop break.\n"); ++#endif ++ break; ++ } ++ iir = serial_in(info, UART_IIR); ++#ifdef SERIAL_DEBUG_INTR ++ printk("IIR = %x...", iir); ++#endif ++ } while ((iir & UART_IIR_NO_INT) == 0); ++ info->last_active = jiffies; ++#ifdef CONFIG_SERIAL_MULTIPORT ++ if (multi->port_monitor) ++ printk("rs port monitor (single) irq %d: 0x%x, 0x%x\n", ++ info->state->irq, first_multi, ++ inb(multi->port_monitor)); ++#endif ++#ifdef SERIAL_DEBUG_INTR ++ printk("end.\n"); ++#endif ++} ++ ++#ifdef CONFIG_SERIAL_MULTIPORT ++/* ++ * This is the serial driver's for multiport boards ++ */ ++static void rs_interrupt_multi(int irq, void *dev_id, struct pt_regs * regs) ++{ ++ int status; ++ struct async_struct * info; ++ int pass_counter = 0; ++ int first_multi= 0; ++ struct rs_multiport_struct *multi; ++ ++#ifdef SERIAL_DEBUG_INTR ++ printk("rs_interrupt_multi(%d)...", irq); ++#endif ++ ++ info = IRQ_ports[irq]; ++ if (!info) ++ return; ++ multi = &rs_multiport[irq]; ++ if (!multi->port1) { ++ /* Should never happen */ ++ printk("rs_interrupt_multi: NULL port1!\n"); ++ return; ++ } ++ if (multi->port_monitor) ++ first_multi = inb(multi->port_monitor); ++ ++ while (1) { ++ if (!info->tty || ++ (serial_in(info, UART_IIR) & UART_IIR_NO_INT)) ++ goto next; ++ ++ info->last_active = jiffies; ++ ++ status = serial_inp(info, UART_LSR); ++#ifdef SERIAL_DEBUG_INTR ++ printk("status = %x...", status); ++#endif ++ if (status & UART_LSR_DR) ++ receive_chars(info, &status, regs); ++ check_modem_status(info); ++ if (status & UART_LSR_THRE) ++ transmit_chars(info, 0); ++ ++ next: ++ info = info->next_port; ++ if (info) ++ continue; ++ ++ info = IRQ_ports[irq]; ++ /* ++ * The user was a bonehead, and misconfigured their ++ * multiport info. Rather than lock up the kernel ++ * in an infinite loop, if we loop too many times, ++ * print a message and break out of the loop. ++ */ ++ if (pass_counter++ > RS_ISR_PASS_LIMIT) { ++ printk("Misconfigured multiport serial info " ++ "for irq %d. Breaking out irq loop\n", irq); ++ break; ++ } ++ if (multi->port_monitor) ++ printk("rs port monitor irq %d: 0x%x, 0x%x\n", ++ info->state->irq, first_multi, ++ inb(multi->port_monitor)); ++ if ((inb(multi->port1) & multi->mask1) != multi->match1) ++ continue; ++ if (!multi->port2) ++ break; ++ if ((inb(multi->port2) & multi->mask2) != multi->match2) ++ continue; ++ if (!multi->port3) ++ break; ++ if ((inb(multi->port3) & multi->mask3) != multi->match3) ++ continue; ++ if (!multi->port4) ++ break; ++ if ((inb(multi->port4) & multi->mask4) != multi->match4) ++ continue; ++ break; ++ } ++#ifdef SERIAL_DEBUG_INTR ++ printk("end.\n"); ++#endif ++} ++#endif ++ ++/* ++ * ------------------------------------------------------------------- ++ * Here ends the serial interrupt routines. ++ * ------------------------------------------------------------------- ++ */ ++ ++/* ++ * This routine is used to handle the "bottom half" processing for the ++ * serial driver, known also the "software interrupt" processing. ++ * This processing is done at the kernel interrupt level, after the ++ * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This ++ * is where time-consuming activities which can not be done in the ++ * interrupt driver proper are done; the interrupt driver schedules ++ * them using rs_sched_event(), and they get done here. ++ */ ++static void do_serial_bh(void) ++{ ++ run_task_queue(&tq_serial); ++} ++ ++static void do_softint(void *private_) ++{ ++ struct async_struct *info = (struct async_struct *) private_; ++ struct tty_struct *tty; ++ ++ tty = info->tty; ++ if (!tty) ++ return; ++ ++ if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) { ++ tty_wakeup(tty); ++ ++#ifdef SERIAL_HAVE_POLL_WAIT ++ wake_up_interruptible(&tty->poll_wait); ++#endif ++ } ++} ++ ++/* ++ * This subroutine is called when the RS_TIMER goes off. It is used ++ * by the serial driver to handle ports that do not have an interrupt ++ * (irq=0). This doesn't work very well for 16450's, but gives barely ++ * passable results for a 16550A. (Although at the expense of much ++ * CPU overhead). ++ */ ++static void rs_timer(unsigned long dummy) ++{ ++ static unsigned long last_strobe; ++ struct async_struct *info; ++ unsigned int i; ++ unsigned long flags; ++ ++ if ((jiffies - last_strobe) >= RS_STROBE_TIME) { ++ for (i=0; i < NR_IRQS; i++) { ++ info = IRQ_ports[i]; ++ if (!info) ++ continue; ++ save_flags(flags); cli(); ++#ifdef CONFIG_SERIAL_SHARE_IRQ ++ if (info->next_port) { ++ do { ++ serial_out(info, UART_IER, 0); ++ info->IER |= UART_IER_THRI; ++ serial_out(info, UART_IER, info->IER); ++ info = info->next_port; ++ } while (info); ++#ifdef CONFIG_SERIAL_MULTIPORT ++ if (rs_multiport[i].port1) ++ rs_interrupt_multi(i, NULL, NULL); ++ else ++#endif ++ rs_interrupt(i, NULL, NULL); ++ } else ++#endif /* CONFIG_SERIAL_SHARE_IRQ */ ++ rs_interrupt_single(i, NULL, NULL); ++ restore_flags(flags); ++ } ++ } ++ last_strobe = jiffies; ++ mod_timer(&serial_timer, jiffies + RS_STROBE_TIME); ++ ++ if (IRQ_ports[0]) { ++ save_flags(flags); cli(); ++#ifdef CONFIG_SERIAL_SHARE_IRQ ++ rs_interrupt(0, NULL, NULL); ++#else ++ rs_interrupt_single(0, NULL, NULL); ++#endif ++ restore_flags(flags); ++ ++ mod_timer(&serial_timer, jiffies + IRQ_timeout[0]); ++ } ++} ++ ++/* ++ * --------------------------------------------------------------- ++ * Low level utility subroutines for the serial driver: routines to ++ * figure out the appropriate timeout for an interrupt chain, routines ++ * to initialize and startup a serial port, and routines to shutdown a ++ * serial port. Useful stuff like that. ++ * --------------------------------------------------------------- ++ */ ++ ++/* ++ * This routine figures out the correct timeout for a particular IRQ. ++ * It uses the smallest timeout of all of the serial ports in a ++ * particular interrupt chain. Now only used for IRQ 0.... ++ */ ++static void figure_IRQ_timeout(int irq) ++{ ++ struct async_struct *info; ++ int timeout = 60*HZ; /* 60 seconds === a long time :-) */ ++ ++ info = IRQ_ports[irq]; ++ if (!info) { ++ IRQ_timeout[irq] = 60*HZ; ++ return; ++ } ++ while (info) { ++ if (info->timeout < timeout) ++ timeout = info->timeout; ++ info = info->next_port; ++ } ++ if (!irq) ++ timeout = timeout / 2; ++ IRQ_timeout[irq] = (timeout > 3) ? timeout-2 : 1; ++} ++ ++#ifdef CONFIG_SERIAL_RSA ++/* Attempts to turn on the RSA FIFO. Returns zero on failure */ ++static int enable_rsa(struct async_struct *info) ++{ ++ unsigned char mode; ++ int result; ++ unsigned long flags; ++ ++ save_flags(flags); cli(); ++ mode = serial_inp(info, UART_RSA_MSR); ++ result = mode & UART_RSA_MSR_FIFO; ++ ++ if (!result) { ++ serial_outp(info, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); ++ mode = serial_inp(info, UART_RSA_MSR); ++ result = mode & UART_RSA_MSR_FIFO; ++ } ++ ++ restore_flags(flags); ++ return result; ++} ++ ++/* Attempts to turn off the RSA FIFO. Returns zero on failure */ ++static int disable_rsa(struct async_struct *info) ++{ ++ unsigned char mode; ++ int result; ++ unsigned long flags; ++ ++ save_flags(flags); cli(); ++ mode = serial_inp(info, UART_RSA_MSR); ++ result = !(mode & UART_RSA_MSR_FIFO); ++ ++ if (!result) { ++ serial_outp(info, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); ++ mode = serial_inp(info, UART_RSA_MSR); ++ result = !(mode & UART_RSA_MSR_FIFO); ++ } ++ ++ restore_flags(flags); ++ return result; ++} ++#endif /* CONFIG_SERIAL_RSA */ ++ ++static int startup(struct async_struct * info) ++{ ++ unsigned long flags; ++ int retval=0; ++ void (*handler)(int, void *, struct pt_regs *); ++ struct serial_state *state= info->state; ++ unsigned long page; ++#ifdef CONFIG_SERIAL_MANY_PORTS ++ unsigned short ICP; ++#endif ++ ++ page = get_zeroed_page(GFP_KERNEL); ++ if (!page) ++ return -ENOMEM; ++ ++ save_flags(flags); cli(); ++ ++ if (info->flags & ASYNC_INITIALIZED) { ++ free_page(page); ++ goto errout; ++ } ++ ++ if (!CONFIGURED_SERIAL_PORT(state) || !state->type) { ++ if (info->tty) ++ set_bit(TTY_IO_ERROR, &info->tty->flags); ++ free_page(page); ++ goto errout; ++ } ++ if (info->xmit.buf) ++ free_page(page); ++ else ++ info->xmit.buf = (unsigned char *) page; ++ ++#ifdef SERIAL_DEBUG_OPEN ++ printk("starting up ttys%d (irq %d)...", info->line, state->irq); ++#endif ++ ++ if (uart_config[state->type].flags & UART_STARTECH) { ++ /* Wake up UART */ ++ serial_outp(info, UART_LCR, 0xBF); ++ serial_outp(info, UART_EFR, UART_EFR_ECB); ++ /* ++ * Turn off LCR == 0xBF so we actually set the IER ++ * register on the XR16C850 ++ */ ++ serial_outp(info, UART_LCR, 0); ++ serial_outp(info, UART_IER, 0); ++ /* ++ * Now reset LCR so we can turn off the ECB bit ++ */ ++ serial_outp(info, UART_LCR, 0xBF); ++ serial_outp(info, UART_EFR, 0); ++ /* ++ * For a XR16C850, we need to set the trigger levels ++ */ ++ if (state->type == PORT_16850) { ++ serial_outp(info, UART_FCTR, UART_FCTR_TRGD | ++ UART_FCTR_RX); ++ serial_outp(info, UART_TRG, UART_TRG_96); ++ serial_outp(info, UART_FCTR, UART_FCTR_TRGD | ++ UART_FCTR_TX); ++ serial_outp(info, UART_TRG, UART_TRG_96); ++ } ++ serial_outp(info, UART_LCR, 0); ++ } ++ ++ if (state->type == PORT_16750) { ++ /* Wake up UART */ ++ serial_outp(info, UART_IER, 0); ++ } ++ ++ if (state->type == PORT_16C950) { ++ /* Wake up and initialize UART */ ++ info->ACR = 0; ++ serial_outp(info, UART_LCR, 0xBF); ++ serial_outp(info, UART_EFR, UART_EFR_ECB); ++ serial_outp(info, UART_IER, 0); ++ serial_outp(info, UART_LCR, 0); ++ serial_icr_write(info, UART_CSR, 0); /* Reset the UART */ ++ serial_outp(info, UART_LCR, 0xBF); ++ serial_outp(info, UART_EFR, UART_EFR_ECB); ++ serial_outp(info, UART_LCR, 0); ++ } ++ ++#ifdef CONFIG_SERIAL_RSA ++ /* ++ * If this is an RSA port, see if we can kick it up to the ++ * higher speed clock. ++ */ ++ if (state->type == PORT_RSA) { ++ if (state->baud_base != SERIAL_RSA_BAUD_BASE && ++ enable_rsa(info)) ++ state->baud_base = SERIAL_RSA_BAUD_BASE; ++ if (state->baud_base == SERIAL_RSA_BAUD_BASE) ++ serial_outp(info, UART_RSA_FRR, 0); ++ } ++#endif ++ ++ /* ++ * Clear the FIFO buffers and disable them ++ * (they will be reenabled in change_speed()) ++ */ ++ if (uart_config[state->type].flags & UART_CLEAR_FIFO) { ++ serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO); ++ serial_outp(info, UART_FCR, (UART_FCR_ENABLE_FIFO | ++ UART_FCR_CLEAR_RCVR | ++ UART_FCR_CLEAR_XMIT)); ++ serial_outp(info, UART_FCR, 0); ++ } ++ ++ /* ++ * Clear the interrupt registers. ++ */ ++ (void) serial_inp(info, UART_LSR); ++ (void) serial_inp(info, UART_RX); ++ (void) serial_inp(info, UART_IIR); ++ (void) serial_inp(info, UART_MSR); ++ ++ /* ++ * At this point there's no way the LSR could still be 0xFF; ++ * if it is, then bail out, because there's likely no UART ++ * here. ++ */ ++ if (!(info->flags & ASYNC_BUGGY_UART) && ++ (serial_inp(info, UART_LSR) == 0xff)) { ++ printk("ttyS%d: LSR safety check engaged!\n", state->line); ++ if (capable(CAP_SYS_ADMIN)) { ++ if (info->tty) ++ set_bit(TTY_IO_ERROR, &info->tty->flags); ++ } else ++ retval = -ENODEV; ++ goto errout; ++ } ++ ++ /* ++ * Allocate the IRQ if necessary ++ */ ++ if (state->irq && (!IRQ_ports[state->irq] || ++ !IRQ_ports[state->irq]->next_port)) { ++ if (IRQ_ports[state->irq]) { ++#ifdef CONFIG_SERIAL_SHARE_IRQ ++ free_irq(state->irq, &IRQ_ports[state->irq]); ++#ifdef CONFIG_SERIAL_MULTIPORT ++ if (rs_multiport[state->irq].port1) ++ handler = rs_interrupt_multi; ++ else ++#endif ++ handler = rs_interrupt; ++#else ++ retval = -EBUSY; ++ goto errout; ++#endif /* CONFIG_SERIAL_SHARE_IRQ */ ++ } else ++ handler = rs_interrupt_single; ++ ++ retval = request_irq(state->irq, handler, SA_SHIRQ, ++ "serial", &IRQ_ports[state->irq]); ++ if (retval) { ++ if (capable(CAP_SYS_ADMIN)) { ++ if (info->tty) ++ set_bit(TTY_IO_ERROR, ++ &info->tty->flags); ++ retval = 0; ++ } ++ goto errout; ++ } ++ } ++ ++ /* ++ * Insert serial port into IRQ chain. ++ */ ++ info->prev_port = 0; ++ info->next_port = IRQ_ports[state->irq]; ++ if (info->next_port) ++ info->next_port->prev_port = info; ++ IRQ_ports[state->irq] = info; ++ figure_IRQ_timeout(state->irq); ++ ++ /* ++ * Now, initialize the UART ++ */ ++ serial_outp(info, UART_LCR, UART_LCR_WLEN8); /* reset DLAB */ ++ ++ info->MCR = 0; ++ if (info->tty->termios->c_cflag & CBAUD) ++ info->MCR = UART_MCR_DTR | UART_MCR_RTS; ++#ifdef CONFIG_SERIAL_MANY_PORTS ++ if (info->flags & ASYNC_FOURPORT) { ++ if (state->irq == 0) ++ info->MCR |= UART_MCR_OUT1; ++ } else ++#endif ++ { ++ if (state->irq != 0) ++ info->MCR |= UART_MCR_OUT2; ++ } ++ info->MCR |= ALPHA_KLUDGE_MCR; /* Don't ask */ ++ serial_outp(info, UART_MCR, info->MCR); ++ ++ /* ++ * Finally, enable interrupts ++ */ ++ info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; ++ serial_outp(info, UART_IER, info->IER); /* enable interrupts */ ++ ++#ifdef CONFIG_SERIAL_MANY_PORTS ++ if (info->flags & ASYNC_FOURPORT) { ++ /* Enable interrupts on the AST Fourport board */ ++ ICP = (info->port & 0xFE0) | 0x01F; ++ outb_p(0x80, ICP); ++ (void) inb_p(ICP); ++ } ++#endif ++ ++ /* ++ * And clear the interrupt registers again for luck. ++ */ ++ (void)serial_inp(info, UART_LSR); ++ (void)serial_inp(info, UART_RX); ++ (void)serial_inp(info, UART_IIR); ++ (void)serial_inp(info, UART_MSR); ++ ++ if (info->tty) ++ clear_bit(TTY_IO_ERROR, &info->tty->flags); ++ info->xmit.head = info->xmit.tail = 0; ++ ++ /* ++ * Set up serial timers... ++ */ ++ mod_timer(&serial_timer, jiffies + 2*HZ/100); ++ ++ /* ++ * Set up the tty->alt_speed kludge ++ */ ++#if (LINUX_VERSION_CODE >= 131394) /* Linux 2.1.66 */ ++ if (info->tty) { ++ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) ++ info->tty->alt_speed = 57600; ++ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) ++ info->tty->alt_speed = 115200; ++ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) ++ info->tty->alt_speed = 230400; ++ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) ++ info->tty->alt_speed = 460800; ++ } ++#endif ++ ++ /* ++ * and set the speed of the serial port ++ */ ++ change_speed(info, 0); ++ ++ info->flags |= ASYNC_INITIALIZED; ++ restore_flags(flags); ++ return 0; ++ ++errout: ++ restore_flags(flags); ++ return retval; ++} ++ ++/* ++ * This routine will shutdown a serial port; interrupts are disabled, and ++ * DTR is dropped if the hangup on close termio flag is on. ++ */ ++static void shutdown(struct async_struct * info) ++{ ++ unsigned long flags; ++ struct serial_state *state; ++ int retval; ++ ++ if (!(info->flags & ASYNC_INITIALIZED)) ++ return; ++ ++ state = info->state; ++ ++#ifdef SERIAL_DEBUG_OPEN ++ printk("Shutting down serial port %d (irq %d)....", info->line, ++ state->irq); ++#endif ++ ++ save_flags(flags); cli(); /* Disable interrupts */ ++ ++ /* ++ * clear delta_msr_wait queue to avoid mem leaks: we may free the irq ++ * here so the queue might never be waken up ++ */ ++ wake_up_interruptible(&info->delta_msr_wait); ++ ++ /* ++ * First unlink the serial port from the IRQ chain... ++ */ ++ if (info->next_port) ++ info->next_port->prev_port = info->prev_port; ++ if (info->prev_port) ++ info->prev_port->next_port = info->next_port; ++ else ++ IRQ_ports[state->irq] = info->next_port; ++ figure_IRQ_timeout(state->irq); ++ ++ /* ++ * Free the IRQ, if necessary ++ */ ++ if (state->irq && (!IRQ_ports[state->irq] || ++ !IRQ_ports[state->irq]->next_port)) { ++ if (IRQ_ports[state->irq]) { ++ free_irq(state->irq, &IRQ_ports[state->irq]); ++ retval = request_irq(state->irq, rs_interrupt_single, ++ SA_SHIRQ, "serial", ++ &IRQ_ports[state->irq]); ++ ++ if (retval) ++ printk("serial shutdown: request_irq: error %d" ++ " Couldn't reacquire IRQ.\n", retval); ++ } else ++ free_irq(state->irq, &IRQ_ports[state->irq]); ++ } ++ ++ if (info->xmit.buf) { ++ unsigned long pg = (unsigned long) info->xmit.buf; ++ info->xmit.buf = 0; ++ free_page(pg); ++ } ++ ++ info->IER = 0; ++ serial_outp(info, UART_IER, 0x00); /* disable all intrs */ ++#ifdef CONFIG_SERIAL_MANY_PORTS ++ if (info->flags & ASYNC_FOURPORT) { ++ /* reset interrupts on the AST Fourport board */ ++ (void) inb((info->port & 0xFE0) | 0x01F); ++ info->MCR |= UART_MCR_OUT1; ++ } else ++#endif ++ info->MCR &= ~UART_MCR_OUT2; ++ info->MCR |= ALPHA_KLUDGE_MCR; /* Don't ask */ ++ ++ /* disable break condition */ ++ serial_out(info, UART_LCR, serial_inp(info, UART_LCR) & ~UART_LCR_SBC); ++ ++ if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) ++ info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS); ++ serial_outp(info, UART_MCR, info->MCR); ++ ++ /* disable FIFO's */ ++ serial_outp(info, UART_FCR, (UART_FCR_ENABLE_FIFO | ++ UART_FCR_CLEAR_RCVR | ++ UART_FCR_CLEAR_XMIT)); ++ serial_outp(info, UART_FCR, 0); ++ ++#ifdef CONFIG_SERIAL_RSA ++ /* ++ * Reset the RSA board back to 115kbps compat mode. ++ */ ++ if ((state->type == PORT_RSA) && ++ (state->baud_base == SERIAL_RSA_BAUD_BASE && ++ disable_rsa(info))) ++ state->baud_base = SERIAL_RSA_BAUD_BASE_LO; ++#endif ++ ++ ++ (void)serial_in(info, UART_RX); /* read data port to reset things */ ++ ++ if (info->tty) ++ set_bit(TTY_IO_ERROR, &info->tty->flags); ++ ++ if (uart_config[info->state->type].flags & UART_STARTECH) { ++ /* Arrange to enter sleep mode */ ++ serial_outp(info, UART_LCR, 0xBF); ++ serial_outp(info, UART_EFR, UART_EFR_ECB); ++ serial_outp(info, UART_LCR, 0); ++ serial_outp(info, UART_IER, UART_IERX_SLEEP); ++ serial_outp(info, UART_LCR, 0xBF); ++ serial_outp(info, UART_EFR, 0); ++ serial_outp(info, UART_LCR, 0); ++ } ++ if (info->state->type == PORT_16750) { ++ /* Arrange to enter sleep mode */ ++ serial_outp(info, UART_IER, UART_IERX_SLEEP); ++ } ++ info->flags &= ~ASYNC_INITIALIZED; ++ restore_flags(flags); ++} ++ ++#if (LINUX_VERSION_CODE < 131394) /* Linux 2.1.66 */ ++static int baud_table[] = { ++ 0, 50, 75, 110, 134, 150, 200, 300, ++ 600, 1200, 1800, 2400, 4800, 9600, 19200, ++ 38400, 57600, 115200, 230400, 460800, 0 }; ++ ++static int tty_get_baud_rate(struct tty_struct *tty) ++{ ++ struct async_struct * info = (struct async_struct *)tty->driver_data; ++ unsigned int cflag, i; ++ ++ cflag = tty->termios->c_cflag; ++ ++ i = cflag & CBAUD; ++ if (i & CBAUDEX) { ++ i &= ~CBAUDEX; ++ if (i < 1 || i > 2) ++ tty->termios->c_cflag &= ~CBAUDEX; ++ else ++ i += 15; ++ } ++ if (i == 15) { ++ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) ++ i += 1; ++ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) ++ i += 2; ++ } ++ return baud_table[i]; ++} ++#endif ++ ++/* ++ * This routine is called to set the UART divisor registers to match ++ * the specified baud rate for a serial port. ++ */ ++static void change_speed(struct async_struct *info, ++ struct termios *old_termios) ++{ ++ int quot = 0, baud_base, baud; ++ unsigned cflag, cval, fcr = 0; ++ int bits; ++ unsigned long flags; ++ ++ if (!info->tty || !info->tty->termios) ++ return; ++ cflag = info->tty->termios->c_cflag; ++ if (!CONFIGURED_SERIAL_PORT(info)) ++ return; ++ ++ /* byte size and parity */ ++ switch (cflag & CSIZE) { ++ case CS5: cval = 0x00; bits = 7; break; ++ case CS6: cval = 0x01; bits = 8; break; ++ case CS7: cval = 0x02; bits = 9; break; ++ case CS8: cval = 0x03; bits = 10; break; ++ /* Never happens, but GCC is too dumb to figure it out */ ++ default: cval = 0x00; bits = 7; break; ++ } ++ if (cflag & CSTOPB) { ++ cval |= 0x04; ++ bits++; ++ } ++ if (cflag & PARENB) { ++ cval |= UART_LCR_PARITY; ++ bits++; ++ } ++ if (!(cflag & PARODD)) ++ cval |= UART_LCR_EPAR; ++#ifdef CMSPAR ++ if (cflag & CMSPAR) ++ cval |= UART_LCR_SPAR; ++#endif ++ ++ /* Determine divisor based on baud rate */ ++ baud = tty_get_baud_rate(info->tty); ++ if (!baud) ++ baud = 9600; /* B0 transition handled in rs_set_termios */ ++#ifdef CONFIG_SERIAL_RSA ++ if ((info->state->type == PORT_RSA) && ++ (info->state->baud_base != SERIAL_RSA_BAUD_BASE) && ++ enable_rsa(info)) ++ info->state->baud_base = SERIAL_RSA_BAUD_BASE; ++#endif ++ baud_base = info->state->baud_base; ++ if (info->state->type == PORT_16C950) { ++ if (baud <= baud_base) ++ serial_icr_write(info, UART_TCR, 0); ++ else if (baud <= 2*baud_base) { ++ serial_icr_write(info, UART_TCR, 0x8); ++ baud_base = baud_base * 2; ++ } else if (baud <= 4*baud_base) { ++ serial_icr_write(info, UART_TCR, 0x4); ++ baud_base = baud_base * 4; ++ } else ++ serial_icr_write(info, UART_TCR, 0); ++ } ++ if (baud == 38400 && ++ ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) ++ quot = info->state->custom_divisor; ++ else { ++ if (baud == 134) ++ /* Special case since 134 is really 134.5 */ ++ quot = (2*baud_base / 269); ++ else if (baud) ++ quot = baud_base / baud; ++ } ++ /* If the quotient is zero refuse the change */ ++ if (!quot && old_termios) { ++ info->tty->termios->c_cflag &= ~CBAUD; ++ info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD); ++ baud = tty_get_baud_rate(info->tty); ++ if (!baud) ++ baud = 9600; ++ if (baud == 38400 && ++ ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) ++ quot = info->state->custom_divisor; ++ else { ++ if (baud == 134) ++ /* Special case since 134 is really 134.5 */ ++ quot = (2*baud_base / 269); ++ else if (baud) ++ quot = baud_base / baud; ++ } ++ } ++ /* As a last resort, if the quotient is zero, default to 9600 bps */ ++ if (!quot) ++ quot = baud_base / 9600; ++ /* ++ * Work around a bug in the Oxford Semiconductor 952 rev B ++ * chip which causes it to seriously miscalculate baud rates ++ * when DLL is 0. ++ */ ++ if (((quot & 0xFF) == 0) && (info->state->type == PORT_16C950) && ++ (info->state->revision == 0x5201)) ++ quot++; ++ ++ info->quot = quot; ++ info->timeout = ((info->xmit_fifo_size*HZ*bits*quot) / baud_base); ++ info->timeout += HZ/50; /* Add .02 seconds of slop */ ++ ++ /* Set up FIFO's */ ++ if (uart_config[info->state->type].flags & UART_USE_FIFO) { ++ if ((info->state->baud_base / quot) < 2400) ++ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; ++#ifdef CONFIG_SERIAL_RSA ++ else if (info->state->type == PORT_RSA) ++ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14; ++#endif ++ else ++ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8; ++ } ++ if (info->state->type == PORT_16750) ++ fcr |= UART_FCR7_64BYTE; ++ ++ /* CTS flow control flag and modem status interrupts */ ++ info->IER &= ~UART_IER_MSI; ++ if (info->flags & ASYNC_HARDPPS_CD) ++ info->IER |= UART_IER_MSI; ++ if (cflag & CRTSCTS) { ++ info->flags |= ASYNC_CTS_FLOW; ++ info->IER |= UART_IER_MSI; ++ } else ++ info->flags &= ~ASYNC_CTS_FLOW; ++ if (cflag & CLOCAL) ++ info->flags &= ~ASYNC_CHECK_CD; ++ else { ++ info->flags |= ASYNC_CHECK_CD; ++ info->IER |= UART_IER_MSI; ++ } ++ serial_out(info, UART_IER, info->IER); ++ ++ /* ++ * Set up parity check flag ++ */ ++#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) ++ ++ info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; ++ if (I_INPCK(info->tty)) ++ info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; ++ if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) ++ info->read_status_mask |= UART_LSR_BI; ++ ++ /* ++ * Characters to ignore ++ */ ++ info->ignore_status_mask = 0; ++ if (I_IGNPAR(info->tty)) ++ info->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; ++ if (I_IGNBRK(info->tty)) { ++ info->ignore_status_mask |= UART_LSR_BI; ++ /* ++ * If we're ignore parity and break indicators, ignore ++ * overruns too. (For real raw support). ++ */ ++ if (I_IGNPAR(info->tty)) ++ info->ignore_status_mask |= UART_LSR_OE; ++ } ++ /* ++ * !!! ignore all characters if CREAD is not set ++ */ ++ if ((cflag & CREAD) == 0) ++ info->ignore_status_mask |= UART_LSR_DR; ++ save_flags(flags); cli(); ++ if (uart_config[info->state->type].flags & UART_STARTECH) { ++ serial_outp(info, UART_LCR, 0xBF); ++ serial_outp(info, UART_EFR, ++ (cflag & CRTSCTS) ? UART_EFR_CTS : 0); ++ } ++ serial_outp(info, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */ ++ serial_outp(info, UART_DLL, quot & 0xff); /* LS of divisor */ ++ serial_outp(info, UART_DLM, quot >> 8); /* MS of divisor */ ++ if (info->state->type == PORT_16750) ++ serial_outp(info, UART_FCR, fcr); /* set fcr */ ++ serial_outp(info, UART_LCR, cval); /* reset DLAB */ ++ info->LCR = cval; /* Save LCR */ ++ if (info->state->type != PORT_16750) { ++ if (fcr & UART_FCR_ENABLE_FIFO) { ++ /* emulated UARTs (Lucent Venus 167x) need two steps */ ++ serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO); ++ } ++ serial_outp(info, UART_FCR, fcr); /* set fcr */ ++ } ++ restore_flags(flags); ++} ++ ++static void rs_put_char(struct tty_struct *tty, unsigned char ch) ++{ ++ struct async_struct *info = (struct async_struct *)tty->driver_data; ++ unsigned long flags; ++ ++ if (serial_paranoia_check(info, tty->device, "rs_put_char")) ++ return; ++ ++ if (!tty || !info->xmit.buf) ++ return; ++ ++ save_flags(flags); cli(); ++ if (CIRC_SPACE(info->xmit.head, ++ info->xmit.tail, ++ SERIAL_XMIT_SIZE) == 0) { ++ restore_flags(flags); ++ return; ++ } ++ ++ info->xmit.buf[info->xmit.head] = ch; ++ info->xmit.head = (info->xmit.head + 1) & (SERIAL_XMIT_SIZE-1); ++ restore_flags(flags); ++} ++ ++static void rs_flush_chars(struct tty_struct *tty) ++{ ++ struct async_struct *info = (struct async_struct *)tty->driver_data; ++ unsigned long flags; ++ ++ if (serial_paranoia_check(info, tty->device, "rs_flush_chars")) ++ return; ++ ++ if (info->xmit.head == info->xmit.tail ++ || tty->stopped ++ || tty->hw_stopped ++ || !info->xmit.buf) ++ return; ++ ++ save_flags(flags); cli(); ++ info->IER |= UART_IER_THRI; ++ serial_out(info, UART_IER, info->IER); ++ restore_flags(flags); ++} ++ ++static int rs_write(struct tty_struct * tty, int from_user, ++ const unsigned char *buf, int count) ++{ ++ int c, ret = 0; ++ struct async_struct *info = (struct async_struct *)tty->driver_data; ++ unsigned long flags; ++ ++ if (serial_paranoia_check(info, tty->device, "rs_write")) ++ return 0; ++ ++ if (!tty || !info->xmit.buf || !tmp_buf) ++ return 0; ++ ++ save_flags(flags); ++ if (from_user) { ++ down(&tmp_buf_sem); ++ while (1) { ++ int c1; ++ c = CIRC_SPACE_TO_END(info->xmit.head, ++ info->xmit.tail, ++ SERIAL_XMIT_SIZE); ++ if (count < c) ++ c = count; ++ if (c <= 0) ++ break; ++ ++ c -= copy_from_user(tmp_buf, buf, c); ++ if (!c) { ++ if (!ret) ++ ret = -EFAULT; ++ break; ++ } ++ cli(); ++ c1 = CIRC_SPACE_TO_END(info->xmit.head, ++ info->xmit.tail, ++ SERIAL_XMIT_SIZE); ++ if (c1 < c) ++ c = c1; ++ memcpy(info->xmit.buf + info->xmit.head, tmp_buf, c); ++ info->xmit.head = ((info->xmit.head + c) & ++ (SERIAL_XMIT_SIZE-1)); ++ restore_flags(flags); ++ buf += c; ++ count -= c; ++ ret += c; ++ } ++ up(&tmp_buf_sem); ++ } else { ++ cli(); ++ while (1) { ++ c = CIRC_SPACE_TO_END(info->xmit.head, ++ info->xmit.tail, ++ SERIAL_XMIT_SIZE); ++ if (count < c) ++ c = count; ++ if (c <= 0) { ++ break; ++ } ++ memcpy(info->xmit.buf + info->xmit.head, buf, c); ++ info->xmit.head = ((info->xmit.head + c) & ++ (SERIAL_XMIT_SIZE-1)); ++ buf += c; ++ count -= c; ++ ret += c; ++ } ++ restore_flags(flags); ++ } ++ if (info->xmit.head != info->xmit.tail ++ && !tty->stopped ++ && !tty->hw_stopped ++ && !(info->IER & UART_IER_THRI)) { ++ info->IER |= UART_IER_THRI; ++ serial_out(info, UART_IER, info->IER); ++ } ++ return ret; ++} ++ ++static int rs_write_room(struct tty_struct *tty) ++{ ++ struct async_struct *info = (struct async_struct *)tty->driver_data; ++ ++ if (serial_paranoia_check(info, tty->device, "rs_write_room")) ++ return 0; ++ return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); ++} ++ ++static int rs_chars_in_buffer(struct tty_struct *tty) ++{ ++ struct async_struct *info = (struct async_struct *)tty->driver_data; ++ ++ if (serial_paranoia_check(info, tty->device, "rs_chars_in_buffer")) ++ return 0; ++ return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); ++} ++ ++static void rs_flush_buffer(struct tty_struct *tty) ++{ ++ struct async_struct *info = (struct async_struct *)tty->driver_data; ++ unsigned long flags; ++ ++ if (serial_paranoia_check(info, tty->device, "rs_flush_buffer")) ++ return; ++ save_flags(flags); cli(); ++ info->xmit.head = info->xmit.tail = 0; ++ restore_flags(flags); ++#ifdef SERIAL_HAVE_POLL_WAIT ++ wake_up_interruptible(&tty->poll_wait); ++#endif ++ tty_wakeup(tty); ++} ++ ++/* ++ * This function is used to send a high-priority XON/XOFF character to ++ * the device ++ */ ++static void rs_send_xchar(struct tty_struct *tty, char ch) ++{ ++ struct async_struct *info = (struct async_struct *)tty->driver_data; ++ ++ if (serial_paranoia_check(info, tty->device, "rs_send_char")) ++ return; ++ ++ info->x_char = ch; ++ if (ch) { ++ /* Make sure transmit interrupts are on */ ++ info->IER |= UART_IER_THRI; ++ serial_out(info, UART_IER, info->IER); ++ } ++} ++ ++/* ++ * ------------------------------------------------------------ ++ * rs_throttle() ++ * ++ * This routine is called by the upper-layer tty layer to signal that ++ * incoming characters should be throttled. ++ * ------------------------------------------------------------ ++ */ ++static void rs_throttle(struct tty_struct * tty) ++{ ++ struct async_struct *info = (struct async_struct *)tty->driver_data; ++ unsigned long flags; ++#ifdef SERIAL_DEBUG_THROTTLE ++ char buf[64]; ++ ++ printk("throttle %s: %d....\n", tty_name(tty, buf), ++ tty->ldisc.chars_in_buffer(tty)); ++#endif ++ ++ if (serial_paranoia_check(info, tty->device, "rs_throttle")) ++ return; ++ ++ if (I_IXOFF(tty)) ++ rs_send_xchar(tty, STOP_CHAR(tty)); ++ ++ if (tty->termios->c_cflag & CRTSCTS) ++ info->MCR &= ~UART_MCR_RTS; ++ ++ save_flags(flags); cli(); ++ serial_out(info, UART_MCR, info->MCR); ++ restore_flags(flags); ++} ++ ++static void rs_unthrottle(struct tty_struct * tty) ++{ ++ struct async_struct *info = (struct async_struct *)tty->driver_data; ++ unsigned long flags; ++#ifdef SERIAL_DEBUG_THROTTLE ++ char buf[64]; ++ ++ printk("unthrottle %s: %d....\n", tty_name(tty, buf), ++ tty->ldisc.chars_in_buffer(tty)); ++#endif ++ ++ if (serial_paranoia_check(info, tty->device, "rs_unthrottle")) ++ return; ++ ++ if (I_IXOFF(tty)) { ++ if (info->x_char) ++ info->x_char = 0; ++ else ++ rs_send_xchar(tty, START_CHAR(tty)); ++ } ++ if (tty->termios->c_cflag & CRTSCTS) ++ info->MCR |= UART_MCR_RTS; ++ save_flags(flags); cli(); ++ serial_out(info, UART_MCR, info->MCR); ++ restore_flags(flags); ++} ++ ++/* ++ * ------------------------------------------------------------ ++ * rs_ioctl() and friends ++ * ------------------------------------------------------------ ++ */ ++ ++static int get_serial_info(struct async_struct * info, ++ struct serial_struct * retinfo) ++{ ++ struct serial_struct tmp; ++ struct serial_state *state = info->state; ++ ++ if (!retinfo) ++ return -EFAULT; ++ memset(&tmp, 0, sizeof(tmp)); ++ tmp.type = state->type; ++ tmp.line = state->line; ++ tmp.port = state->port; ++ if (HIGH_BITS_OFFSET) ++ tmp.port_high = state->port >> HIGH_BITS_OFFSET; ++ else ++ tmp.port_high = 0; ++ tmp.irq = state->irq; ++ tmp.flags = state->flags; ++ tmp.xmit_fifo_size = state->xmit_fifo_size; ++ tmp.baud_base = state->baud_base; ++ tmp.close_delay = state->close_delay; ++ tmp.closing_wait = state->closing_wait; ++ tmp.custom_divisor = state->custom_divisor; ++ tmp.hub6 = state->hub6; ++ tmp.io_type = state->io_type; ++ if (copy_to_user(retinfo,&tmp,sizeof(*retinfo))) ++ return -EFAULT; ++ return 0; ++} ++ ++static int set_serial_info(struct async_struct * info, ++ struct serial_struct * new_info) ++{ ++ struct serial_struct new_serial; ++ struct serial_state old_state, *state; ++ unsigned int i,change_irq,change_port; ++ int retval = 0; ++ unsigned long new_port; ++ ++ if (copy_from_user(&new_serial,new_info,sizeof(new_serial))) ++ return -EFAULT; ++ state = info->state; ++ old_state = *state; ++ ++ new_port = new_serial.port; ++ if (HIGH_BITS_OFFSET) ++ new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET; ++ ++ change_irq = new_serial.irq != state->irq; ++ change_port = (new_port != ((int) state->port)) || ++ (new_serial.hub6 != state->hub6); ++ ++ if (!capable(CAP_SYS_ADMIN)) { ++ if (change_irq || change_port || ++ (new_serial.baud_base != state->baud_base) || ++ (new_serial.type != state->type) || ++ (new_serial.close_delay != state->close_delay) || ++ (new_serial.xmit_fifo_size != state->xmit_fifo_size) || ++ ((new_serial.flags & ~ASYNC_USR_MASK) != ++ (state->flags & ~ASYNC_USR_MASK))) ++ return -EPERM; ++ state->flags = ((state->flags & ~ASYNC_USR_MASK) | ++ (new_serial.flags & ASYNC_USR_MASK)); ++ info->flags = ((info->flags & ~ASYNC_USR_MASK) | ++ (new_serial.flags & ASYNC_USR_MASK)); ++ state->custom_divisor = new_serial.custom_divisor; ++ goto check_and_exit; ++ } ++ ++ new_serial.irq = irq_cannonicalize(new_serial.irq); ++ ++ if ((new_serial.irq >= NR_IRQS) || (new_serial.irq < 0) || ++ (new_serial.baud_base < 9600)|| (new_serial.type < PORT_UNKNOWN) || ++ (new_serial.type > PORT_MAX) || (new_serial.type == PORT_CIRRUS) || ++ (new_serial.type == PORT_STARTECH)) { ++ return -EINVAL; ++ } ++ ++ if ((new_serial.type != state->type) || ++ (new_serial.xmit_fifo_size <= 0)) ++ new_serial.xmit_fifo_size = ++ uart_config[new_serial.type].dfl_xmit_fifo_size; ++ ++ /* Make sure address is not already in use */ ++ if (new_serial.type) { ++ for (i = 0 ; i < NR_PORTS; i++) ++ if ((state != &rs_table[i]) && ++ (rs_table[i].io_type == SERIAL_IO_PORT) && ++ (rs_table[i].port == new_port) && ++ rs_table[i].type) ++ return -EADDRINUSE; ++ } ++ ++ if ((change_port || change_irq) && (state->count > 1)) ++ return -EBUSY; ++ ++ /* ++ * OK, past this point, all the error checking has been done. ++ * At this point, we start making changes..... ++ */ ++ ++ state->baud_base = new_serial.baud_base; ++ state->flags = ((state->flags & ~ASYNC_FLAGS) | ++ (new_serial.flags & ASYNC_FLAGS)); ++ info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) | ++ (info->flags & ASYNC_INTERNAL_FLAGS)); ++ state->custom_divisor = new_serial.custom_divisor; ++ state->close_delay = new_serial.close_delay * HZ/100; ++ state->closing_wait = new_serial.closing_wait * HZ/100; ++#if (LINUX_VERSION_CODE > 0x20100) ++ info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; ++#endif ++ info->xmit_fifo_size = state->xmit_fifo_size = ++ new_serial.xmit_fifo_size; ++ ++ if ((state->type != PORT_UNKNOWN) && state->port) { ++#ifdef CONFIG_SERIAL_RSA ++ if (old_state.type == PORT_RSA) ++ release_region(state->port + UART_RSA_BASE, 16); ++ else ++#endif ++ release_region(state->port,8); ++ } ++ state->type = new_serial.type; ++ if (change_port || change_irq) { ++ /* ++ * We need to shutdown the serial port at the old ++ * port/irq combination. ++ */ ++ shutdown(info); ++ state->irq = new_serial.irq; ++ info->port = state->port = new_port; ++ info->hub6 = state->hub6 = new_serial.hub6; ++ if (info->hub6) ++ info->io_type = state->io_type = SERIAL_IO_HUB6; ++ else if (info->io_type == SERIAL_IO_HUB6) ++ info->io_type = state->io_type = SERIAL_IO_PORT; ++ } ++ if ((state->type != PORT_UNKNOWN) && state->port) { ++#ifdef CONFIG_SERIAL_RSA ++ if (state->type == PORT_RSA) ++ request_region(state->port + UART_RSA_BASE, ++ 16, "serial_rsa(set)"); ++ else ++#endif ++ request_region(state->port,8,"serial(set)"); ++ } ++ ++ ++check_and_exit: ++ if ((!state->port && !state->iomem_base) || !state->type) ++ return 0; ++ if (info->flags & ASYNC_INITIALIZED) { ++ if (((old_state.flags & ASYNC_SPD_MASK) != ++ (state->flags & ASYNC_SPD_MASK)) || ++ (old_state.custom_divisor != state->custom_divisor)) { ++#if (LINUX_VERSION_CODE >= 131394) /* Linux 2.1.66 */ ++ if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) ++ info->tty->alt_speed = 57600; ++ if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) ++ info->tty->alt_speed = 115200; ++ if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) ++ info->tty->alt_speed = 230400; ++ if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) ++ info->tty->alt_speed = 460800; ++#endif ++ change_speed(info, 0); ++ } ++ } else ++ retval = startup(info); ++ return retval; ++} ++ ++ ++/* ++ * get_lsr_info - get line status register info ++ * ++ * Purpose: Let user call ioctl() to get info when the UART physically ++ * is emptied. On bus types like RS485, the transmitter must ++ * release the bus after transmitting. This must be done when ++ * the transmit shift register is empty, not be done when the ++ * transmit holding register is empty. This functionality ++ * allows an RS485 driver to be written in user space. ++ */ ++static int get_lsr_info(struct async_struct * info, unsigned int *value) ++{ ++ unsigned char status; ++ unsigned int result; ++ unsigned long flags; ++ ++ save_flags(flags); cli(); ++ status = serial_in(info, UART_LSR); ++ restore_flags(flags); ++ result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); ++ ++ /* ++ * If we're about to load something into the transmit ++ * register, we'll pretend the transmitter isn't empty to ++ * avoid a race condition (depending on when the transmit ++ * interrupt happens). ++ */ ++ if (info->x_char || ++ ((CIRC_CNT(info->xmit.head, info->xmit.tail, ++ SERIAL_XMIT_SIZE) > 0) && ++ !info->tty->stopped && !info->tty->hw_stopped)) ++ result &= ~TIOCSER_TEMT; ++ ++ if (copy_to_user(value, &result, sizeof(int))) ++ return -EFAULT; ++ return 0; ++} ++ ++ ++static int get_modem_info(struct async_struct * info, unsigned int *value) ++{ ++ unsigned char control, status; ++ unsigned int result; ++ unsigned long flags; ++ ++ control = info->MCR; ++ save_flags(flags); cli(); ++ status = serial_in(info, UART_MSR); ++ restore_flags(flags); ++ result = ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) ++ | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) ++#ifdef TIOCM_OUT1 ++ | ((control & UART_MCR_OUT1) ? TIOCM_OUT1 : 0) ++ | ((control & UART_MCR_OUT2) ? TIOCM_OUT2 : 0) ++#endif ++ | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) ++ | ((status & UART_MSR_RI) ? TIOCM_RNG : 0) ++ | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) ++ | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); ++ ++ if (copy_to_user(value, &result, sizeof(int))) ++ return -EFAULT; ++ return 0; ++} ++ ++static int set_modem_info(struct async_struct * info, unsigned int cmd, ++ unsigned int *value) ++{ ++ unsigned int arg; ++ unsigned long flags; ++ ++ if (copy_from_user(&arg, value, sizeof(int))) ++ return -EFAULT; ++ ++ switch (cmd) { ++ case TIOCMBIS: ++ if (arg & TIOCM_RTS) ++ info->MCR |= UART_MCR_RTS; ++ if (arg & TIOCM_DTR) ++ info->MCR |= UART_MCR_DTR; ++#ifdef TIOCM_OUT1 ++ if (arg & TIOCM_OUT1) ++ info->MCR |= UART_MCR_OUT1; ++ if (arg & TIOCM_OUT2) ++ info->MCR |= UART_MCR_OUT2; ++#endif ++ if (arg & TIOCM_LOOP) ++ info->MCR |= UART_MCR_LOOP; ++ break; ++ case TIOCMBIC: ++ if (arg & TIOCM_RTS) ++ info->MCR &= ~UART_MCR_RTS; ++ if (arg & TIOCM_DTR) ++ info->MCR &= ~UART_MCR_DTR; ++#ifdef TIOCM_OUT1 ++ if (arg & TIOCM_OUT1) ++ info->MCR &= ~UART_MCR_OUT1; ++ if (arg & TIOCM_OUT2) ++ info->MCR &= ~UART_MCR_OUT2; ++#endif ++ if (arg & TIOCM_LOOP) ++ info->MCR &= ~UART_MCR_LOOP; ++ break; ++ case TIOCMSET: ++ info->MCR = ((info->MCR & ~(UART_MCR_RTS | ++#ifdef TIOCM_OUT1 ++ UART_MCR_OUT1 | ++ UART_MCR_OUT2 | ++#endif ++ UART_MCR_LOOP | ++ UART_MCR_DTR)) ++ | ((arg & TIOCM_RTS) ? UART_MCR_RTS : 0) ++#ifdef TIOCM_OUT1 ++ | ((arg & TIOCM_OUT1) ? UART_MCR_OUT1 : 0) ++ | ((arg & TIOCM_OUT2) ? UART_MCR_OUT2 : 0) ++#endif ++ | ((arg & TIOCM_LOOP) ? UART_MCR_LOOP : 0) ++ | ((arg & TIOCM_DTR) ? UART_MCR_DTR : 0)); ++ break; ++ default: ++ return -EINVAL; ++ } ++ save_flags(flags); cli(); ++ info->MCR |= ALPHA_KLUDGE_MCR; /* Don't ask */ ++ serial_out(info, UART_MCR, info->MCR); ++ restore_flags(flags); ++ return 0; ++} ++ ++static int do_autoconfig(struct async_struct * info) ++{ ++ int irq, retval; ++ ++ if (!capable(CAP_SYS_ADMIN)) ++ return -EPERM; ++ ++ if (info->state->count > 1) ++ return -EBUSY; ++ ++ shutdown(info); ++ ++ autoconfig(info->state); ++ if ((info->state->flags & ASYNC_AUTO_IRQ) && ++ (info->state->port != 0 || info->state->iomem_base != 0) && ++ (info->state->type != PORT_UNKNOWN)) { ++ irq = detect_uart_irq(info->state); ++ if (irq > 0) ++ info->state->irq = irq; ++ } ++ ++ retval = startup(info); ++ if (retval) ++ return retval; ++ return 0; ++} ++ ++/* ++ * rs_break() --- routine which turns the break handling on or off ++ */ ++#if (LINUX_VERSION_CODE < 131394) /* Linux 2.1.66 */ ++static void send_break( struct async_struct * info, int duration) ++{ ++ if (!CONFIGURED_SERIAL_PORT(info)) ++ return; ++ current->state = TASK_INTERRUPTIBLE; ++ current->timeout = jiffies + duration; ++ cli(); ++ info->LCR |= UART_LCR_SBC; ++ serial_out(info, UART_LCR, info->LCR); ++ schedule(); ++ info->LCR &= ~UART_LCR_SBC; ++ serial_out(info, UART_LCR, info->LCR); ++ sti(); ++} ++#else ++static void rs_break(struct tty_struct *tty, int break_state) ++{ ++ struct async_struct * info = (struct async_struct *)tty->driver_data; ++ unsigned long flags; ++ ++ if (serial_paranoia_check(info, tty->device, "rs_break")) ++ return; ++ ++ if (!CONFIGURED_SERIAL_PORT(info)) ++ return; ++ save_flags(flags); cli(); ++ if (break_state == -1) ++ info->LCR |= UART_LCR_SBC; ++ else ++ info->LCR &= ~UART_LCR_SBC; ++ serial_out(info, UART_LCR, info->LCR); ++ restore_flags(flags); ++} ++#endif ++ ++#ifdef CONFIG_SERIAL_MULTIPORT ++static int get_multiport_struct(struct async_struct * info, ++ struct serial_multiport_struct *retinfo) ++{ ++ struct serial_multiport_struct ret; ++ struct rs_multiport_struct *multi; ++ ++ multi = &rs_multiport[info->state->irq]; ++ ++ ret.port_monitor = multi->port_monitor; ++ ++ ret.port1 = multi->port1; ++ ret.mask1 = multi->mask1; ++ ret.match1 = multi->match1; ++ ++ ret.port2 = multi->port2; ++ ret.mask2 = multi->mask2; ++ ret.match2 = multi->match2; ++ ++ ret.port3 = multi->port3; ++ ret.mask3 = multi->mask3; ++ ret.match3 = multi->match3; ++ ++ ret.port4 = multi->port4; ++ ret.mask4 = multi->mask4; ++ ret.match4 = multi->match4; ++ ++ ret.irq = info->state->irq; ++ ++ if (copy_to_user(retinfo,&ret,sizeof(*retinfo))) ++ return -EFAULT; ++ return 0; ++} ++ ++static int set_multiport_struct(struct async_struct * info, ++ struct serial_multiport_struct *in_multi) ++{ ++ struct serial_multiport_struct new_multi; ++ struct rs_multiport_struct *multi; ++ struct serial_state *state; ++ int was_multi, now_multi; ++ int retval; ++ void (*handler)(int, void *, struct pt_regs *); ++ ++ if (!capable(CAP_SYS_ADMIN)) ++ return -EPERM; ++ state = info->state; ++ ++ if (copy_from_user(&new_multi, in_multi, ++ sizeof(struct serial_multiport_struct))) ++ return -EFAULT; ++ ++ if (new_multi.irq != state->irq || state->irq == 0 || ++ !IRQ_ports[state->irq]) ++ return -EINVAL; ++ ++ multi = &rs_multiport[state->irq]; ++ was_multi = (multi->port1 != 0); ++ ++ multi->port_monitor = new_multi.port_monitor; ++ ++ if (multi->port1) ++ release_region(multi->port1,1); ++ multi->port1 = new_multi.port1; ++ multi->mask1 = new_multi.mask1; ++ multi->match1 = new_multi.match1; ++ if (multi->port1) ++ request_region(multi->port1,1,"serial(multiport1)"); ++ ++ if (multi->port2) ++ release_region(multi->port2,1); ++ multi->port2 = new_multi.port2; ++ multi->mask2 = new_multi.mask2; ++ multi->match2 = new_multi.match2; ++ if (multi->port2) ++ request_region(multi->port2,1,"serial(multiport2)"); ++ ++ if (multi->port3) ++ release_region(multi->port3,1); ++ multi->port3 = new_multi.port3; ++ multi->mask3 = new_multi.mask3; ++ multi->match3 = new_multi.match3; ++ if (multi->port3) ++ request_region(multi->port3,1,"serial(multiport3)"); ++ ++ if (multi->port4) ++ release_region(multi->port4,1); ++ multi->port4 = new_multi.port4; ++ multi->mask4 = new_multi.mask4; ++ multi->match4 = new_multi.match4; ++ if (multi->port4) ++ request_region(multi->port4,1,"serial(multiport4)"); ++ ++ now_multi = (multi->port1 != 0); ++ ++ if (IRQ_ports[state->irq]->next_port && ++ (was_multi != now_multi)) { ++ free_irq(state->irq, &IRQ_ports[state->irq]); ++ if (now_multi) ++ handler = rs_interrupt_multi; ++ else ++ handler = rs_interrupt; ++ ++ retval = request_irq(state->irq, handler, SA_SHIRQ, ++ "serial", &IRQ_ports[state->irq]); ++ if (retval) { ++ printk("Couldn't reallocate serial interrupt " ++ "driver!!\n"); ++ } ++ } ++ return 0; ++} ++#endif ++ ++static int rs_ioctl(struct tty_struct *tty, struct file * file, ++ unsigned int cmd, unsigned long arg) ++{ ++ struct async_struct * info = (struct async_struct *)tty->driver_data; ++ struct async_icount cprev, cnow; /* kernel counter temps */ ++ struct serial_icounter_struct icount; ++ unsigned long flags; ++#if (LINUX_VERSION_CODE < 131394) /* Linux 2.1.66 */ ++ int retval, tmp; ++#endif ++ ++ if (serial_paranoia_check(info, tty->device, "rs_ioctl")) ++ return -ENODEV; ++ ++ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && ++ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) && ++ (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { ++ if (tty->flags & (1 << TTY_IO_ERROR)) ++ return -EIO; ++ } ++ ++ switch (cmd) { ++#if (LINUX_VERSION_CODE < 131394) /* Linux 2.1.66 */ ++ case TCSBRK: /* SVID version: non-zero arg --> no break */ ++ retval = tty_check_change(tty); ++ if (retval) ++ return retval; ++ tty_wait_until_sent(tty, 0); ++ if (signal_pending(current)) ++ return -EINTR; ++ if (!arg) { ++ send_break(info, HZ/4); /* 1/4 second */ ++ if (signal_pending(current)) ++ return -EINTR; ++ } ++ return 0; ++ case TCSBRKP: /* support for POSIX tcsendbreak() */ ++ retval = tty_check_change(tty); ++ if (retval) ++ return retval; ++ tty_wait_until_sent(tty, 0); ++ if (signal_pending(current)) ++ return -EINTR; ++ send_break(info, arg ? arg*(HZ/10) : HZ/4); ++ if (signal_pending(current)) ++ return -EINTR; ++ return 0; ++ case TIOCGSOFTCAR: ++ tmp = C_CLOCAL(tty) ? 1 : 0; ++ if (copy_to_user((void *)arg, &tmp, sizeof(int))) ++ return -EFAULT; ++ return 0; ++ case TIOCSSOFTCAR: ++ if (copy_from_user(&tmp, (void *)arg, sizeof(int))) ++ return -EFAULT; ++ ++ tty->termios->c_cflag = ++ ((tty->termios->c_cflag & ~CLOCAL) | ++ (tmp ? CLOCAL : 0)); ++ return 0; ++#endif ++ case TIOCMGET: ++ return get_modem_info(info, (unsigned int *) arg); ++ case TIOCMBIS: ++ case TIOCMBIC: ++ case TIOCMSET: ++ return set_modem_info(info, cmd, (unsigned int *) arg); ++ case TIOCGSERIAL: ++ return get_serial_info(info, ++ (struct serial_struct *) arg); ++ case TIOCSSERIAL: ++ return set_serial_info(info, ++ (struct serial_struct *) arg); ++ case TIOCSERCONFIG: ++ return do_autoconfig(info); ++ ++ case TIOCSERGETLSR: /* Get line status register */ ++ return get_lsr_info(info, (unsigned int *) arg); ++ ++ case TIOCSERGSTRUCT: ++ if (copy_to_user((struct async_struct *) arg, ++ info, sizeof(struct async_struct))) ++ return -EFAULT; ++ return 0; ++ ++#ifdef CONFIG_SERIAL_MULTIPORT ++ case TIOCSERGETMULTI: ++ return get_multiport_struct(info, ++ (struct serial_multiport_struct *) arg); ++ case TIOCSERSETMULTI: ++ return set_multiport_struct(info, ++ (struct serial_multiport_struct *) arg); ++#endif ++ ++ /* ++ * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change ++ * - mask passed in arg for lines of interest ++ * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) ++ * Caller should use TIOCGICOUNT to see which one it was ++ */ ++ case TIOCMIWAIT: ++ save_flags(flags); cli(); ++ /* note the counters on entry */ ++ cprev = info->state->icount; ++ restore_flags(flags); ++ /* Force modem status interrupts on */ ++ info->IER |= UART_IER_MSI; ++ serial_out(info, UART_IER, info->IER); ++ while (1) { ++ interruptible_sleep_on(&info->delta_msr_wait); ++ /* see if a signal did it */ ++ if (signal_pending(current)) ++ return -ERESTARTSYS; ++ save_flags(flags); cli(); ++ cnow = info->state->icount; /* atomic copy */ ++ restore_flags(flags); ++ if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && ++ cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) ++ return -EIO; /* no change => error */ ++ if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || ++ ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || ++ ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || ++ ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { ++ return 0; ++ } ++ cprev = cnow; ++ } ++ /* NOTREACHED */ ++ ++ /* ++ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) ++ * Return: write counters to the user passed counter struct ++ * NB: both 1->0 and 0->1 transitions are counted except for ++ * RI where only 0->1 is counted. ++ */ ++ case TIOCGICOUNT: ++ save_flags(flags); cli(); ++ cnow = info->state->icount; ++ restore_flags(flags); ++ icount.cts = cnow.cts; ++ icount.dsr = cnow.dsr; ++ icount.rng = cnow.rng; ++ icount.dcd = cnow.dcd; ++ icount.rx = cnow.rx; ++ icount.tx = cnow.tx; ++ icount.frame = cnow.frame; ++ icount.overrun = cnow.overrun; ++ icount.parity = cnow.parity; ++ icount.brk = cnow.brk; ++ icount.buf_overrun = cnow.buf_overrun; ++ ++ if (copy_to_user((void *)arg, &icount, sizeof(icount))) ++ return -EFAULT; ++ return 0; ++ case TIOCSERGWILD: ++ case TIOCSERSWILD: ++ /* "setserial -W" is called in Debian boot */ ++ printk ("TIOCSER?WILD ioctl obsolete, ignored.\n"); ++ return 0; ++ ++ default: ++ return -ENOIOCTLCMD; ++ } ++ return 0; ++} ++ ++static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios) ++{ ++ struct async_struct *info = (struct async_struct *)tty->driver_data; ++ unsigned long flags; ++ unsigned int cflag = tty->termios->c_cflag; ++ ++ if ( (cflag == old_termios->c_cflag) ++ && ( RELEVANT_IFLAG(tty->termios->c_iflag) ++ == RELEVANT_IFLAG(old_termios->c_iflag))) ++ return; ++ ++ change_speed(info, old_termios); ++ ++ /* Handle transition to B0 status */ ++ if ((old_termios->c_cflag & CBAUD) && ++ !(cflag & CBAUD)) { ++ info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS); ++ save_flags(flags); cli(); ++ serial_out(info, UART_MCR, info->MCR); ++ restore_flags(flags); ++ } ++ ++ /* Handle transition away from B0 status */ ++ if (!(old_termios->c_cflag & CBAUD) && ++ (cflag & CBAUD)) { ++ info->MCR |= UART_MCR_DTR; ++ if (!(tty->termios->c_cflag & CRTSCTS) || ++ !test_bit(TTY_THROTTLED, &tty->flags)) { ++ info->MCR |= UART_MCR_RTS; ++ } ++ save_flags(flags); cli(); ++ serial_out(info, UART_MCR, info->MCR); ++ restore_flags(flags); ++ } ++ ++ /* Handle turning off CRTSCTS */ ++ if ((old_termios->c_cflag & CRTSCTS) && ++ !(tty->termios->c_cflag & CRTSCTS)) { ++ tty->hw_stopped = 0; ++ rs_start(tty); ++ } ++ ++#if 0 ++ /* ++ * No need to wake up processes in open wait, since they ++ * sample the CLOCAL flag once, and don't recheck it. ++ * XXX It's not clear whether the current behavior is correct ++ * or not. Hence, this may change..... ++ */ ++ if (!(old_termios->c_cflag & CLOCAL) && ++ (tty->termios->c_cflag & CLOCAL)) ++ wake_up_interruptible(&info->open_wait); ++#endif ++} ++ ++/* ++ * ------------------------------------------------------------ ++ * rs_close() ++ * ++ * This routine is called when the serial port gets closed. First, we ++ * wait for the last remaining data to be sent. Then, we unlink its ++ * async structure from the interrupt chain if necessary, and we free ++ * that IRQ if nothing is left in the chain. ++ * ------------------------------------------------------------ ++ */ ++static void rs_close(struct tty_struct *tty, struct file * filp) ++{ ++ struct async_struct * info = (struct async_struct *)tty->driver_data; ++ struct serial_state *state; ++ unsigned long flags; ++ ++ if (!info || serial_paranoia_check(info, tty->device, "rs_close")) ++ return; ++ ++ state = info->state; ++ ++ save_flags(flags); cli(); ++ ++ if (tty_hung_up_p(filp)) { ++ DBG_CNT("before DEC-hung"); ++ MOD_DEC_USE_COUNT; ++ restore_flags(flags); ++ return; ++ } ++ ++#ifdef SERIAL_DEBUG_OPEN ++ printk("rs_close ttys%d, count = %d\n", info->line, state->count); ++#endif ++ if ((tty->count == 1) && (state->count != 1)) { ++ /* ++ * Uh, oh. tty->count is 1, which means that the tty ++ * structure will be freed. state->count should always ++ * be one in these conditions. If it's greater than ++ * one, we've got real problems, since it means the ++ * serial port won't be shutdown. ++ */ ++ printk("rs_close: bad serial port count; tty->count is 1, " ++ "state->count is %d\n", state->count); ++ state->count = 1; ++ } ++ if (--state->count < 0) { ++ printk("rs_close: bad serial port count for ttys%d: %d\n", ++ info->line, state->count); ++ state->count = 0; ++ } ++ if (state->count) { ++ DBG_CNT("before DEC-2"); ++ MOD_DEC_USE_COUNT; ++ restore_flags(flags); ++ return; ++ } ++ info->flags |= ASYNC_CLOSING; ++ restore_flags(flags); ++ /* ++ * Save the termios structure, since this port may have ++ * separate termios for callout and dialin. ++ */ ++ if (info->flags & ASYNC_NORMAL_ACTIVE) ++ info->state->normal_termios = *tty->termios; ++ if (info->flags & ASYNC_CALLOUT_ACTIVE) ++ info->state->callout_termios = *tty->termios; ++ /* ++ * Now we wait for the transmit buffer to clear; and we notify ++ * the line discipline to only process XON/XOFF characters. ++ */ ++ tty->closing = 1; ++ if (state->closing_wait != ASYNC_CLOSING_WAIT_NONE) ++ tty_wait_until_sent(tty, state->closing_wait); ++ /* ++ * At this point we stop accepting input. To do this, we ++ * disable the receive line status interrupts, and tell the ++ * interrupt driver to stop checking the data ready bit in the ++ * line status register. ++ */ ++ info->IER &= ~UART_IER_RLSI; ++ info->read_status_mask &= ~UART_LSR_DR; ++ if (info->flags & ASYNC_INITIALIZED) { ++ serial_out(info, UART_IER, info->IER); ++ /* ++ * Before we drop DTR, make sure the UART transmitter ++ * has completely drained; this is especially ++ * important if there is a transmit FIFO! ++ */ ++ rs_wait_until_sent(tty, info->timeout); ++ } ++ shutdown(info); ++ if (tty->driver.flush_buffer) ++ tty->driver.flush_buffer(tty); ++ tty_ldisc_flush(tty); ++ tty->closing = 0; ++ info->event = 0; ++ info->tty = 0; ++ if (info->blocked_open) { ++ if (state->close_delay) { ++ set_current_state(TASK_INTERRUPTIBLE); ++ schedule_timeout(state->close_delay); ++ } ++ wake_up_interruptible(&info->open_wait); ++ } ++ info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE| ++ ASYNC_CLOSING); ++ wake_up_interruptible(&info->close_wait); ++ MOD_DEC_USE_COUNT; ++} ++ ++/* ++ * rs_wait_until_sent() --- wait until the transmitter is empty ++ */ ++static void rs_wait_until_sent(struct tty_struct *tty, int timeout) ++{ ++ struct async_struct * info = (struct async_struct *)tty->driver_data; ++ unsigned long orig_jiffies, char_time; ++ int lsr; ++ ++ if (serial_paranoia_check(info, tty->device, "rs_wait_until_sent")) ++ return; ++ ++ if (info->state->type == PORT_UNKNOWN) ++ return; ++ ++ if (info->xmit_fifo_size == 0) ++ return; /* Just in case.... */ ++ ++ orig_jiffies = jiffies; ++ /* ++ * Set the check interval to be 1/5 of the estimated time to ++ * send a single character, and make it at least 1. The check ++ * interval should also be less than the timeout. ++ * ++ * Note: we have to use pretty tight timings here to satisfy ++ * the NIST-PCTS. ++ */ ++ char_time = (info->timeout - HZ/50) / info->xmit_fifo_size; ++ char_time = char_time / 5; ++ if (char_time == 0) ++ char_time = 1; ++ if (timeout && timeout < char_time) ++ char_time = timeout; ++ /* ++ * If the transmitter hasn't cleared in twice the approximate ++ * amount of time to send the entire FIFO, it probably won't ++ * ever clear. This assumes the UART isn't doing flow ++ * control, which is currently the case. Hence, if it ever ++ * takes longer than info->timeout, this is probably due to a ++ * UART bug of some kind. So, we clamp the timeout parameter at ++ * 2*info->timeout. ++ */ ++ if (!timeout || timeout > 2*info->timeout) ++ timeout = 2*info->timeout; ++#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT ++ printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time); ++ printk("jiff=%lu...", jiffies); ++#endif ++ while (!((lsr = serial_inp(info, UART_LSR)) & UART_LSR_TEMT)) { ++#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT ++ printk("lsr = %d (jiff=%lu)...", lsr, jiffies); ++#endif ++ set_current_state(TASK_INTERRUPTIBLE); ++ schedule_timeout(char_time); ++ if (signal_pending(current)) ++ break; ++ if (timeout && time_after(jiffies, orig_jiffies + timeout)) ++ break; ++ } ++#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT ++ printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); ++#endif ++} ++ ++/* ++ * rs_hangup() --- called by tty_hangup() when a hangup is signaled. ++ */ ++static void rs_hangup(struct tty_struct *tty) ++{ ++ struct async_struct * info = (struct async_struct *)tty->driver_data; ++ struct serial_state *state = info->state; ++ ++ if (serial_paranoia_check(info, tty->device, "rs_hangup")) ++ return; ++ ++ state = info->state; ++ ++ rs_flush_buffer(tty); ++ if (info->flags & ASYNC_CLOSING) ++ return; ++ shutdown(info); ++ info->event = 0; ++ state->count = 0; ++ info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE); ++ info->tty = 0; ++ wake_up_interruptible(&info->open_wait); ++} ++ ++/* ++ * ------------------------------------------------------------ ++ * rs_open() and friends ++ * ------------------------------------------------------------ ++ */ ++static int block_til_ready(struct tty_struct *tty, struct file * filp, ++ struct async_struct *info) ++{ ++ DECLARE_WAITQUEUE(wait, current); ++ struct serial_state *state = info->state; ++ int retval; ++ int do_clocal = 0, extra_count = 0; ++ unsigned long flags; ++ ++ /* ++ * If the device is in the middle of being closed, then block ++ * until it's done, and then try again. ++ */ ++ if (tty_hung_up_p(filp) || ++ (info->flags & ASYNC_CLOSING)) { ++ if (info->flags & ASYNC_CLOSING) ++ interruptible_sleep_on(&info->close_wait); ++#ifdef SERIAL_DO_RESTART ++ return ((info->flags & ASYNC_HUP_NOTIFY) ? ++ -EAGAIN : -ERESTARTSYS); ++#else ++ return -EAGAIN; ++#endif ++ } ++ ++ /* ++ * If this is a callout device, then just make sure the normal ++ * device isn't being used. ++ */ ++ if (tty->driver.subtype == SERIAL_TYPE_CALLOUT) { ++ if (info->flags & ASYNC_NORMAL_ACTIVE) ++ return -EBUSY; ++ if ((info->flags & ASYNC_CALLOUT_ACTIVE) && ++ (info->flags & ASYNC_SESSION_LOCKOUT) && ++ (info->session != current->session)) ++ return -EBUSY; ++ if ((info->flags & ASYNC_CALLOUT_ACTIVE) && ++ (info->flags & ASYNC_PGRP_LOCKOUT) && ++ (info->pgrp != current->pgrp)) ++ return -EBUSY; ++ info->flags |= ASYNC_CALLOUT_ACTIVE; ++ return 0; ++ } ++ ++ /* ++ * If non-blocking mode is set, or the port is not enabled, ++ * then make the check up front and then exit. ++ */ ++ if ((filp->f_flags & O_NONBLOCK) || ++ (tty->flags & (1 << TTY_IO_ERROR))) { ++ if (info->flags & ASYNC_CALLOUT_ACTIVE) ++ return -EBUSY; ++ info->flags |= ASYNC_NORMAL_ACTIVE; ++ return 0; ++ } ++ ++ if (info->flags & ASYNC_CALLOUT_ACTIVE) { ++ if (state->normal_termios.c_cflag & CLOCAL) ++ do_clocal = 1; ++ } else { ++ if (tty->termios->c_cflag & CLOCAL) ++ do_clocal = 1; ++ } ++ ++ /* ++ * Block waiting for the carrier detect and the line to become ++ * free (i.e., not in use by the callout). While we are in ++ * this loop, state->count is dropped by one, so that ++ * rs_close() knows when to free things. We restore it upon ++ * exit, either normal or abnormal. ++ */ ++ retval = 0; ++ add_wait_queue(&info->open_wait, &wait); ++#ifdef SERIAL_DEBUG_OPEN ++ printk("block_til_ready before block: ttys%d, count = %d\n", ++ state->line, state->count); ++#endif ++ save_flags(flags); cli(); ++ if (!tty_hung_up_p(filp)) { ++ extra_count = 1; ++ state->count--; ++ } ++ restore_flags(flags); ++ info->blocked_open++; ++ while (1) { ++ save_flags(flags); cli(); ++ if (!(info->flags & ASYNC_CALLOUT_ACTIVE) && ++ (tty->termios->c_cflag & CBAUD)) ++ serial_out(info, UART_MCR, ++ serial_inp(info, UART_MCR) | ++ (UART_MCR_DTR | UART_MCR_RTS)); ++ restore_flags(flags); ++ set_current_state(TASK_INTERRUPTIBLE); ++ if (tty_hung_up_p(filp) || ++ !(info->flags & ASYNC_INITIALIZED)) { ++#ifdef SERIAL_DO_RESTART ++ if (info->flags & ASYNC_HUP_NOTIFY) ++ retval = -EAGAIN; ++ else ++ retval = -ERESTARTSYS; ++#else ++ retval = -EAGAIN; ++#endif ++ break; ++ } ++ if (!(info->flags & ASYNC_CALLOUT_ACTIVE) && ++ !(info->flags & ASYNC_CLOSING) && ++ (do_clocal || (serial_in(info, UART_MSR) & ++ UART_MSR_DCD))) ++ break; ++ if (signal_pending(current)) { ++ retval = -ERESTARTSYS; ++ break; ++ } ++#ifdef SERIAL_DEBUG_OPEN ++ printk("block_til_ready blocking: ttys%d, count = %d\n", ++ info->line, state->count); ++#endif ++ schedule(); ++ } ++ set_current_state(TASK_RUNNING); ++ remove_wait_queue(&info->open_wait, &wait); ++ if (extra_count) ++ state->count++; ++ info->blocked_open--; ++#ifdef SERIAL_DEBUG_OPEN ++ printk("block_til_ready after blocking: ttys%d, count = %d\n", ++ info->line, state->count); ++#endif ++ if (retval) ++ return retval; ++ info->flags |= ASYNC_NORMAL_ACTIVE; ++ return 0; ++} ++ ++static int get_async_struct(int line, struct async_struct **ret_info) ++{ ++ struct async_struct *info; ++ struct serial_state *sstate; ++ ++ sstate = rs_table + line; ++ sstate->count++; ++ if (sstate->info) { ++ *ret_info = sstate->info; ++ return 0; ++ } ++ info = kmalloc(sizeof(struct async_struct), GFP_KERNEL); ++ if (!info) { ++ sstate->count--; ++ return -ENOMEM; ++ } ++ memset(info, 0, sizeof(struct async_struct)); ++ init_waitqueue_head(&info->open_wait); ++ init_waitqueue_head(&info->close_wait); ++ init_waitqueue_head(&info->delta_msr_wait); ++ info->magic = SERIAL_MAGIC; ++ info->port = sstate->port; ++ info->flags = sstate->flags; ++ info->io_type = sstate->io_type; ++ info->iomem_base = sstate->iomem_base; ++ info->iomem_reg_shift = sstate->iomem_reg_shift; ++ info->xmit_fifo_size = sstate->xmit_fifo_size; ++ info->line = line; ++ info->tqueue.routine = do_softint; ++ info->tqueue.data = info; ++ info->state = sstate; ++ if (sstate->info) { ++ kfree(info); ++ *ret_info = sstate->info; ++ return 0; ++ } ++ *ret_info = sstate->info = info; ++ return 0; ++} ++ ++/* ++ * This routine is called whenever a serial port is opened. It ++ * enables interrupts for a serial port, linking in its async structure into ++ * the IRQ chain. It also performs the serial-specific ++ * initialization for the tty structure. ++ * ++ * Note that on failure, we don't decrement the module use count - the tty ++ * later will call rs_close, which will decrement it for us as long as ++ * tty->driver_data is set non-NULL. --rmk ++ */ ++static int rs_open(struct tty_struct *tty, struct file * filp) ++{ ++ struct async_struct *info; ++ int retval, line; ++ unsigned long page; ++ ++ MOD_INC_USE_COUNT; ++ line = MINOR(tty->device) - tty->driver.minor_start; ++ if ((line < 0) || (line >= NR_PORTS)) { ++ MOD_DEC_USE_COUNT; ++ return -ENODEV; ++ } ++ retval = get_async_struct(line, &info); ++ if (retval) { ++ MOD_DEC_USE_COUNT; ++ return retval; ++ } ++ tty->driver_data = info; ++ info->tty = tty; ++ if (serial_paranoia_check(info, tty->device, "rs_open")) ++ return -ENODEV; ++ ++#ifdef SERIAL_DEBUG_OPEN ++ printk("rs_open %s%d, count = %d\n", tty->driver.name, info->line, ++ info->state->count); ++#endif ++#if (LINUX_VERSION_CODE > 0x20100) ++ info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; ++#endif ++ ++ /* ++ * This relies on lock_kernel() stuff so wants tidying for 2.5 ++ */ ++ if (!tmp_buf) { ++ page = get_zeroed_page(GFP_KERNEL); ++ if (!page) ++ return -ENOMEM; ++ if (tmp_buf) ++ free_page(page); ++ else ++ tmp_buf = (unsigned char *) page; ++ } ++ ++ /* ++ * If the port is the middle of closing, bail out now ++ */ ++ if (tty_hung_up_p(filp) || ++ (info->flags & ASYNC_CLOSING)) { ++ if (info->flags & ASYNC_CLOSING) ++ interruptible_sleep_on(&info->close_wait); ++#ifdef SERIAL_DO_RESTART ++ return ((info->flags & ASYNC_HUP_NOTIFY) ? ++ -EAGAIN : -ERESTARTSYS); ++#else ++ return -EAGAIN; ++#endif ++ } ++ ++ /* ++ * Start up serial port ++ */ ++ retval = startup(info); ++ if (retval) ++ return retval; ++ ++ retval = block_til_ready(tty, filp, info); ++ if (retval) { ++#ifdef SERIAL_DEBUG_OPEN ++ printk("rs_open returning after block_til_ready with %d\n", ++ retval); ++#endif ++ return retval; ++ } ++ ++ if ((info->state->count == 1) && ++ (info->flags & ASYNC_SPLIT_TERMIOS)) { ++ if (tty->driver.subtype == SERIAL_TYPE_NORMAL) ++ *tty->termios = info->state->normal_termios; ++ else ++ *tty->termios = info->state->callout_termios; ++ change_speed(info, 0); ++ } ++#ifdef CONFIG_SERIAL_CONSOLE ++ if (sercons.cflag && sercons.index == line) { ++ tty->termios->c_cflag = sercons.cflag; ++ sercons.cflag = 0; ++ change_speed(info, 0); ++ } ++#endif ++ info->session = current->session; ++ info->pgrp = current->pgrp; ++ ++#ifdef SERIAL_DEBUG_OPEN ++ printk("rs_open ttys%d successful...", info->line); ++#endif ++ return 0; ++} ++ ++/* ++ * /proc fs routines.... ++ */ ++ ++static inline int line_info(char *buf, struct serial_state *state) ++{ ++ struct async_struct *info = state->info, scr_info; ++ char stat_buf[30], control, status; ++ int ret; ++ unsigned long flags; ++ ++ /* ++ * Return zero characters for ports not claimed by driver. ++ */ ++ if (state->type == PORT_UNKNOWN) { ++ return 0; /* ignore unused ports */ ++ } ++ ++ ret = sprintf(buf, "%d: uart:%s port:%lX irq:%d", ++ state->line, uart_config[state->type].name, ++ (state->port ? state->port : (long)state->iomem_base), ++ state->irq); ++ ++ /* ++ * Figure out the current RS-232 lines ++ */ ++ if (!info) { ++ info = &scr_info; /* This is just for serial_{in,out} */ ++ ++ info->magic = SERIAL_MAGIC; ++ info->port = state->port; ++ info->flags = state->flags; ++ info->hub6 = state->hub6; ++ info->io_type = state->io_type; ++ info->iomem_base = state->iomem_base; ++ info->iomem_reg_shift = state->iomem_reg_shift; ++ info->quot = 0; ++ info->tty = 0; ++ } ++ save_flags(flags); cli(); ++ status = serial_in(info, UART_MSR); ++ control = info != &scr_info ? info->MCR : serial_in(info, UART_MCR); ++ restore_flags(flags); ++ ++ stat_buf[0] = 0; ++ stat_buf[1] = 0; ++ if (control & UART_MCR_RTS) ++ strcat(stat_buf, "|RTS"); ++ if (status & UART_MSR_CTS) ++ strcat(stat_buf, "|CTS"); ++ if (control & UART_MCR_DTR) ++ strcat(stat_buf, "|DTR"); ++ if (status & UART_MSR_DSR) ++ strcat(stat_buf, "|DSR"); ++ if (status & UART_MSR_DCD) ++ strcat(stat_buf, "|CD"); ++ if (status & UART_MSR_RI) ++ strcat(stat_buf, "|RI"); ++ ++ if (info->quot) { ++ ret += sprintf(buf+ret, " baud:%d", ++ state->baud_base / info->quot); ++ } ++ ++ ret += sprintf(buf+ret, " tx:%d rx:%d", ++ state->icount.tx, state->icount.rx); ++ ++ if (state->icount.frame) ++ ret += sprintf(buf+ret, " fe:%d", state->icount.frame); ++ ++ if (state->icount.parity) ++ ret += sprintf(buf+ret, " pe:%d", state->icount.parity); ++ ++ if (state->icount.brk) ++ ret += sprintf(buf+ret, " brk:%d", state->icount.brk); ++ ++ if (state->icount.overrun) ++ ret += sprintf(buf+ret, " oe:%d", state->icount.overrun); ++ ++ /* ++ * Last thing is the RS-232 status lines ++ */ ++ ret += sprintf(buf+ret, " %s\n", stat_buf+1); ++ return ret; ++} ++ ++static int rs_read_proc(char *page, char **start, off_t off, int count, ++ int *eof, void *data) ++{ ++ int i, len = 0, l; ++ off_t begin = 0; ++ ++ len += sprintf(page, "serinfo:1.0 driver:%s%s revision:%s\n", ++ serial_version, LOCAL_VERSTRING, serial_revdate); ++ for (i = 0; i < NR_PORTS && len < 4000; i++) { ++ l = line_info(page + len, &rs_table[i]); ++ len += l; ++ if (len+begin > off+count) ++ goto done; ++ if (len+begin < off) { ++ begin += len; ++ len = 0; ++ } ++ } ++ *eof = 1; ++done: ++ if (off >= len+begin) ++ return 0; ++ *start = page + (off-begin); ++ return ((count < begin+len-off) ? count : begin+len-off); ++} ++ ++/* ++ * --------------------------------------------------------------------- ++ * rs_init() and friends ++ * ++ * rs_init() is called at boot-time to initialize the serial driver. ++ * --------------------------------------------------------------------- ++ */ ++ ++/* ++ * This routine prints out the appropriate serial driver version ++ * number, and identifies which options were configured into this ++ * driver. ++ */ ++static char serial_options[] __initdata = ++#ifdef CONFIG_HUB6 ++ " HUB-6" ++#define SERIAL_OPT ++#endif ++#ifdef CONFIG_SERIAL_MANY_PORTS ++ " MANY_PORTS" ++#define SERIAL_OPT ++#endif ++#ifdef CONFIG_SERIAL_MULTIPORT ++ " MULTIPORT" ++#define SERIAL_OPT ++#endif ++#ifdef CONFIG_SERIAL_SHARE_IRQ ++ " SHARE_IRQ" ++#define SERIAL_OPT ++#endif ++#ifdef CONFIG_SERIAL_DETECT_IRQ ++ " DETECT_IRQ" ++#define SERIAL_OPT ++#endif ++#ifdef ENABLE_SERIAL_PCI ++ " SERIAL_PCI" ++#define SERIAL_OPT ++#endif ++#ifdef ENABLE_SERIAL_PNP ++ " ISAPNP" ++#define SERIAL_OPT ++#endif ++#ifdef ENABLE_SERIAL_ACPI ++ " SERIAL_ACPI" ++#define SERIAL_OPT ++#endif ++#ifdef SERIAL_OPT ++ " enabled\n"; ++#else ++ " no serial options enabled\n"; ++#endif ++#undef SERIAL_OPT ++ ++static _INLINE_ void show_serial_version(void) ++{ ++ printk(KERN_INFO "%s version %s%s (%s) with%s", serial_name, ++ serial_version, LOCAL_VERSTRING, serial_revdate, ++ serial_options); ++} ++ ++/* ++ * This routine detect the IRQ of a serial port by clearing OUT2 when ++ * no UART interrupt are requested (IER = 0) (*GPL*). This seems to work at ++ * each time, as long as no other device permanently request the IRQ. ++ * If no IRQ is detected, or multiple IRQ appear, this function returns 0. ++ * The variable "state" and the field "state->port" should not be null. ++ */ ++static unsigned detect_uart_irq (struct serial_state * state) ++{ ++ int irq; ++ unsigned long irqs; ++ unsigned char save_mcr, save_ier; ++ struct async_struct scr_info; /* serial_{in,out} because HUB6 */ ++ ++#ifdef CONFIG_SERIAL_MANY_PORTS ++ unsigned char save_ICP=0; /* no warning */ ++ unsigned short ICP=0; ++ ++ if (state->flags & ASYNC_FOURPORT) { ++ ICP = (state->port & 0xFE0) | 0x01F; ++ save_ICP = inb_p(ICP); ++ outb_p(0x80, ICP); ++ (void) inb_p(ICP); ++ } ++#endif ++ scr_info.magic = SERIAL_MAGIC; ++ scr_info.state = state; ++ scr_info.port = state->port; ++ scr_info.flags = state->flags; ++#ifdef CONFIG_HUB6 ++ scr_info.hub6 = state->hub6; ++#endif ++ scr_info.io_type = state->io_type; ++ scr_info.iomem_base = state->iomem_base; ++ scr_info.iomem_reg_shift = state->iomem_reg_shift; ++ ++ /* forget possible initially masked and pending IRQ */ ++ probe_irq_off(probe_irq_on()); ++ save_mcr = serial_inp(&scr_info, UART_MCR); ++ save_ier = serial_inp(&scr_info, UART_IER); ++ serial_outp(&scr_info, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2); ++ ++ irqs = probe_irq_on(); ++ serial_outp(&scr_info, UART_MCR, 0); ++ udelay (10); ++ if (state->flags & ASYNC_FOURPORT) { ++ serial_outp(&scr_info, UART_MCR, ++ UART_MCR_DTR | UART_MCR_RTS); ++ } else { ++ serial_outp(&scr_info, UART_MCR, ++ UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2); ++ } ++ serial_outp(&scr_info, UART_IER, 0x0f); /* enable all intrs */ ++ (void)serial_inp(&scr_info, UART_LSR); ++ (void)serial_inp(&scr_info, UART_RX); ++ (void)serial_inp(&scr_info, UART_IIR); ++ (void)serial_inp(&scr_info, UART_MSR); ++ serial_outp(&scr_info, UART_TX, 0xFF); ++ udelay (20); ++ irq = probe_irq_off(irqs); ++ ++ serial_outp(&scr_info, UART_MCR, save_mcr); ++ serial_outp(&scr_info, UART_IER, save_ier); ++#ifdef CONFIG_SERIAL_MANY_PORTS ++ if (state->flags & ASYNC_FOURPORT) ++ outb_p(save_ICP, ICP); ++#endif ++ return (irq > 0)? irq : 0; ++} ++ ++/* ++ * This is a quickie test to see how big the FIFO is. ++ * It doesn't work at all the time, more's the pity. ++ */ ++static int size_fifo(struct async_struct *info) ++{ ++ unsigned char old_fcr, old_mcr, old_dll, old_dlm; ++ int count; ++ ++ old_fcr = serial_inp(info, UART_FCR); ++ old_mcr = serial_inp(info, UART_MCR); ++ serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO | ++ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); ++ serial_outp(info, UART_MCR, UART_MCR_LOOP); ++ serial_outp(info, UART_LCR, UART_LCR_DLAB); ++ old_dll = serial_inp(info, UART_DLL); ++ old_dlm = serial_inp(info, UART_DLM); ++ serial_outp(info, UART_DLL, 0x01); ++ serial_outp(info, UART_DLM, 0x00); ++ serial_outp(info, UART_LCR, 0x03); ++ for (count = 0; count < 256; count++) ++ serial_outp(info, UART_TX, count); ++ mdelay(20); ++ for (count = 0; (serial_inp(info, UART_LSR) & UART_LSR_DR) && ++ (count < 256); count++) ++ serial_inp(info, UART_RX); ++ serial_outp(info, UART_FCR, old_fcr); ++ serial_outp(info, UART_MCR, old_mcr); ++ serial_outp(info, UART_LCR, UART_LCR_DLAB); ++ serial_outp(info, UART_DLL, old_dll); ++ serial_outp(info, UART_DLM, old_dlm); ++ ++ return count; ++} ++ ++/* ++ * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's. ++ * When this function is called we know it is at least a StarTech ++ * 16650 V2, but it might be one of several StarTech UARTs, or one of ++ * its clones. (We treat the broken original StarTech 16650 V1 as a ++ * 16550, and why not? Startech doesn't seem to even acknowledge its ++ * existence.) ++ * ++ * What evil have men's minds wrought... ++ */ ++static void autoconfig_startech_uarts(struct async_struct *info, ++ struct serial_state *state, ++ unsigned long flags) ++{ ++ unsigned char scratch, scratch2, scratch3, scratch4; ++ ++ /* ++ * First we check to see if it's an Oxford Semiconductor UART. ++ * ++ * If we have to do this here because some non-National ++ * Semiconductor clone chips lock up if you try writing to the ++ * LSR register (which serial_icr_read does) ++ */ ++ if (state->type == PORT_16550A) { ++ /* ++ * EFR [4] must be set else this test fails ++ * ++ * This shouldn't be necessary, but Mike Hudson ++ * (Exoray@isys.ca) claims that it's needed for 952 ++ * dual UART's (which are not recommended for new designs). ++ */ ++ info->ACR = 0; ++ serial_out(info, UART_LCR, 0xBF); ++ serial_out(info, UART_EFR, 0x10); ++ serial_out(info, UART_LCR, 0x00); ++ /* Check for Oxford Semiconductor 16C950 */ ++ scratch = serial_icr_read(info, UART_ID1); ++ scratch2 = serial_icr_read(info, UART_ID2); ++ scratch3 = serial_icr_read(info, UART_ID3); ++ ++ if (scratch == 0x16 && scratch2 == 0xC9 && ++ (scratch3 == 0x50 || scratch3 == 0x52 || ++ scratch3 == 0x54)) { ++ state->type = PORT_16C950; ++ state->revision = serial_icr_read(info, UART_REV) | ++ (scratch3 << 8); ++ return; ++ } ++ } ++ ++ /* ++ * We check for a XR16C850 by setting DLL and DLM to 0, and ++ * then reading back DLL and DLM. If DLM reads back 0x10, ++ * then the UART is a XR16C850 and the DLL contains the chip ++ * revision. If DLM reads back 0x14, then the UART is a ++ * XR16C854. ++ * ++ */ ++ ++ /* Save the DLL and DLM */ ++ ++ serial_outp(info, UART_LCR, UART_LCR_DLAB); ++ scratch3 = serial_inp(info, UART_DLL); ++ scratch4 = serial_inp(info, UART_DLM); ++ ++ serial_outp(info, UART_DLL, 0); ++ serial_outp(info, UART_DLM, 0); ++ scratch2 = serial_inp(info, UART_DLL); ++ scratch = serial_inp(info, UART_DLM); ++ serial_outp(info, UART_LCR, 0); ++ ++ if (scratch == 0x10 || scratch == 0x14) { ++ if (scratch == 0x10) ++ state->revision = scratch2; ++ state->type = PORT_16850; ++ return; ++ } ++ ++ /* Restore the DLL and DLM */ ++ ++ serial_outp(info, UART_LCR, UART_LCR_DLAB); ++ serial_outp(info, UART_DLL, scratch3); ++ serial_outp(info, UART_DLM, scratch4); ++ serial_outp(info, UART_LCR, 0); ++ /* ++ * We distinguish between the '654 and the '650 by counting ++ * how many bytes are in the FIFO. I'm using this for now, ++ * since that's the technique that was sent to me in the ++ * serial driver update, but I'm not convinced this works. ++ * I've had problems doing this in the past. -TYT ++ */ ++ if (size_fifo(info) == 64) ++ state->type = PORT_16654; ++ else ++ state->type = PORT_16650V2; ++} ++ ++/* ++ * This routine is called by rs_init() to initialize a specific serial ++ * port. It determines what type of UART chip this serial port is ++ * using: 8250, 16450, 16550, 16550A. The important question is ++ * whether or not this UART is a 16550A or not, since this will ++ * determine whether or not we can use its FIFO features or not. ++ */ ++static void autoconfig(struct serial_state * state) ++{ ++ unsigned char status1, status2, scratch, scratch2, scratch3; ++ unsigned char save_lcr, save_mcr; ++ struct async_struct *info, scr_info; ++ unsigned long flags; ++ ++ state->type = PORT_UNKNOWN; ++ ++#ifdef SERIAL_DEBUG_AUTOCONF ++ printk("Testing ttyS%d (0x%04lx, 0x%04x)...\n", state->line, ++ state->port, (unsigned) state->iomem_base); ++#endif ++ ++ if (!CONFIGURED_SERIAL_PORT(state)) ++ return; ++ ++ info = &scr_info; /* This is just for serial_{in,out} */ ++ ++ info->magic = SERIAL_MAGIC; ++ info->state = state; ++ info->port = state->port; ++ info->flags = state->flags; ++#ifdef CONFIG_HUB6 ++ info->hub6 = state->hub6; ++#endif ++ info->io_type = state->io_type; ++ info->iomem_base = state->iomem_base; ++ info->iomem_reg_shift = state->iomem_reg_shift; ++ ++ save_flags(flags); cli(); ++ ++ if (!(state->flags & ASYNC_BUGGY_UART) && ++ !state->iomem_base) { ++ /* ++ * Do a simple existence test first; if we fail this, ++ * there's no point trying anything else. ++ * ++ * 0x80 is used as a nonsense port to prevent against ++ * false positives due to ISA bus float. The ++ * assumption is that 0x80 is a non-existent port; ++ * which should be safe since include/asm/io.h also ++ * makes this assumption. ++ */ ++ scratch = serial_inp(info, UART_IER); ++ serial_outp(info, UART_IER, 0); ++#ifdef __i386__ ++ outb(0xff, 0x080); ++#endif ++ scratch2 = serial_inp(info, UART_IER); ++ serial_outp(info, UART_IER, 0x0F); ++#ifdef __i386__ ++ outb(0, 0x080); ++#endif ++ scratch3 = serial_inp(info, UART_IER); ++ serial_outp(info, UART_IER, scratch); ++ if (scratch2 || scratch3 != 0x0F) { ++#ifdef SERIAL_DEBUG_AUTOCONF ++ printk("serial: ttyS%d: simple autoconfig failed " ++ "(%02x, %02x)\n", state->line, ++ scratch2, scratch3); ++#endif ++ restore_flags(flags); ++ return; /* We failed; there's nothing here */ ++ } ++ } ++ ++ save_mcr = serial_in(info, UART_MCR); ++ save_lcr = serial_in(info, UART_LCR); ++ ++ /* ++ * Check to see if a UART is really there. Certain broken ++ * internal modems based on the Rockwell chipset fail this ++ * test, because they apparently don't implement the loopback ++ * test mode. So this test is skipped on the COM 1 through ++ * COM 4 ports. This *should* be safe, since no board ++ * manufacturer would be stupid enough to design a board ++ * that conflicts with COM 1-4 --- we hope! ++ */ ++ if (!(state->flags & ASYNC_SKIP_TEST)) { ++ serial_outp(info, UART_MCR, UART_MCR_LOOP | 0x0A); ++ status1 = serial_inp(info, UART_MSR) & 0xF0; ++ serial_outp(info, UART_MCR, save_mcr); ++ if (status1 != 0x90) { ++#ifdef SERIAL_DEBUG_AUTOCONF ++ printk("serial: ttyS%d: no UART loopback failed\n", ++ state->line); ++#endif ++ restore_flags(flags); ++ return; ++ } ++ } ++ serial_outp(info, UART_LCR, 0xBF); /* set up for StarTech test */ ++ serial_outp(info, UART_EFR, 0); /* EFR is the same as FCR */ ++ serial_outp(info, UART_LCR, 0); ++ serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO); ++ scratch = serial_in(info, UART_IIR) >> 6; ++ switch (scratch) { ++ case 0: ++ state->type = PORT_16450; ++ break; ++ case 1: ++ state->type = PORT_UNKNOWN; ++ break; ++ case 2: ++ state->type = PORT_16550; ++ break; ++ case 3: ++ state->type = PORT_16550A; ++ break; ++ } ++ if (state->type == PORT_16550A) { ++ /* Check for Startech UART's */ ++ serial_outp(info, UART_LCR, UART_LCR_DLAB); ++ if (serial_in(info, UART_EFR) == 0) { ++ serial_outp(info, UART_EFR, 0xA8); ++ if (serial_in(info, UART_EFR) == 0) { ++ /* We are a NS16552D/Motorola ++ * 8xxx DUART, stop. */ ++ goto out; ++ } ++ state->type = PORT_16650; ++ serial_outp(info, UART_EFR, 0); ++ } else { ++ serial_outp(info, UART_LCR, 0xBF); ++ if (serial_in(info, UART_EFR) == 0) ++ autoconfig_startech_uarts(info, state, flags); ++ } ++ } ++ if (state->type == PORT_16550A) { ++ /* Check for TI 16750 */ ++ serial_outp(info, UART_LCR, save_lcr | UART_LCR_DLAB); ++ serial_outp(info, UART_FCR, ++ UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); ++ scratch = serial_in(info, UART_IIR) >> 5; ++ if (scratch == 7) { ++ /* ++ * If this is a 16750, and not a cheap UART ++ * clone, then it should only go into 64 byte ++ * mode if the UART_FCR7_64BYTE bit was set ++ * while UART_LCR_DLAB was latched. ++ */ ++ serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO); ++ serial_outp(info, UART_LCR, 0); ++ serial_outp(info, UART_FCR, ++ UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); ++ scratch = serial_in(info, UART_IIR) >> 5; ++ if (scratch == 6) ++ state->type = PORT_16750; ++ } ++ serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO); ++ } ++#if defined(CONFIG_SERIAL_RSA) && defined(MODULE) ++ if (state->type == PORT_16550A) { ++ int i; ++ ++ for (i = 0 ; i < PORT_RSA_MAX ; ++i) { ++ if (!probe_rsa[i] && !force_rsa[i]) ++ break; ++ if (((probe_rsa[i] != state->port) || ++ check_region(state->port + UART_RSA_BASE, 16)) && ++ (force_rsa[i] != state->port)) ++ continue; ++ if (!enable_rsa(info)) ++ continue; ++ state->type = PORT_RSA; ++ state->baud_base = SERIAL_RSA_BAUD_BASE; ++ break; ++ } ++ } ++#endif ++out: ++ serial_outp(info, UART_LCR, save_lcr); ++ if (state->type == PORT_16450) { ++ scratch = serial_in(info, UART_SCR); ++ serial_outp(info, UART_SCR, 0xa5); ++ status1 = serial_in(info, UART_SCR); ++ serial_outp(info, UART_SCR, 0x5a); ++ status2 = serial_in(info, UART_SCR); ++ serial_outp(info, UART_SCR, scratch); ++ ++ if ((status1 != 0xa5) || (status2 != 0x5a)) ++ state->type = PORT_8250; ++ } ++ state->xmit_fifo_size = uart_config[state->type].dfl_xmit_fifo_size; ++ ++ if (state->type == PORT_UNKNOWN) { ++ restore_flags(flags); ++ return; ++ } ++ ++ if (info->port) { ++#ifdef CONFIG_SERIAL_RSA ++ if (state->type == PORT_RSA) ++ request_region(info->port + UART_RSA_BASE, 16, ++ "serial_rsa(auto)"); ++ else ++#endif ++ request_region(info->port,8,"serial(auto)"); ++ } ++ ++ /* ++ * Reset the UART. ++ */ ++#ifdef CONFIG_SERIAL_RSA ++ if (state->type == PORT_RSA) ++ serial_outp(info, UART_RSA_FRR, 0); ++#endif ++ serial_outp(info, UART_MCR, save_mcr); ++ serial_outp(info, UART_FCR, (UART_FCR_ENABLE_FIFO | ++ UART_FCR_CLEAR_RCVR | ++ UART_FCR_CLEAR_XMIT)); ++ serial_outp(info, UART_FCR, 0); ++ (void)serial_in(info, UART_RX); ++ serial_outp(info, UART_IER, 0); ++ ++ restore_flags(flags); ++} ++ ++int register_serial(struct serial_struct *req); ++void unregister_serial(int line); ++ ++#if (LINUX_VERSION_CODE > 0x20100) ++EXPORT_SYMBOL(register_serial); ++EXPORT_SYMBOL(unregister_serial); ++#else ++static struct symbol_table serial_syms = { ++#include ++ X(register_serial), ++ X(unregister_serial), ++#include ++}; ++#endif ++ ++ ++#if defined(ENABLE_SERIAL_PCI) || defined(ENABLE_SERIAL_PNP) ++ ++static void __devinit printk_pnp_dev_id(unsigned short vendor, ++ unsigned short device) ++{ ++ printk("%c%c%c%x%x%x%x", ++ 'A' + ((vendor >> 2) & 0x3f) - 1, ++ 'A' + (((vendor & 3) << 3) | ((vendor >> 13) & 7)) - 1, ++ 'A' + ((vendor >> 8) & 0x1f) - 1, ++ (device >> 4) & 0x0f, ++ device & 0x0f, ++ (device >> 12) & 0x0f, ++ (device >> 8) & 0x0f); ++} ++ ++static _INLINE_ int get_pci_port(struct pci_dev *dev, ++ struct pci_board *board, ++ struct serial_struct *req, ++ int idx) ++{ ++ unsigned long port; ++ int base_idx; ++ int max_port; ++ int offset; ++ ++ base_idx = SPCI_FL_GET_BASE(board->flags); ++ if (board->flags & SPCI_FL_BASE_TABLE) ++ base_idx += idx; ++ ++ if (board->flags & SPCI_FL_REGION_SZ_CAP) { ++ max_port = pci_resource_len(dev, base_idx) / 8; ++ if (idx >= max_port) ++ return 1; ++ } ++ ++ offset = board->first_uart_offset; ++ ++ /* Timedia/SUNIX uses a mixture of BARs and offsets */ ++ /* Ugh, this is ugly as all hell --- TYT */ ++ if(dev->vendor == PCI_VENDOR_ID_TIMEDIA ) /* 0x1409 */ ++ switch(idx) { ++ case 0: base_idx=0; ++ break; ++ case 1: base_idx=0; offset=8; ++ break; ++ case 2: base_idx=1; ++ break; ++ case 3: base_idx=1; offset=8; ++ break; ++ case 4: /* BAR 2*/ ++ case 5: /* BAR 3 */ ++ case 6: /* BAR 4*/ ++ case 7: base_idx=idx-2; /* BAR 5*/ ++ } ++ ++ /* Some Titan cards are also a little weird */ ++ if (dev->vendor == PCI_VENDOR_ID_TITAN && ++ (dev->device == PCI_DEVICE_ID_TITAN_400L || ++ dev->device == PCI_DEVICE_ID_TITAN_800L)) { ++ switch (idx) { ++ case 0: base_idx = 1; ++ break; ++ case 1: base_idx = 2; ++ break; ++ default: ++ base_idx = 4; ++ offset = 8 * (idx - 2); ++ } ++ ++ } ++ ++ /* HP's Diva chip puts the 4th/5th serial port further out, and ++ * some serial ports are supposed to be hidden on certain models. ++ */ ++ if (dev->vendor == PCI_VENDOR_ID_HP && ++ dev->device == PCI_DEVICE_ID_HP_SAS) { ++ switch (dev->subsystem_device) { ++ case 0x104B: /* Maestro */ ++ if (idx == 3) idx++; ++ break; ++ case 0x1282: /* Everest / Longs Peak */ ++ if (idx > 0) idx++; ++ if (idx > 2) idx++; ++ break; ++ } ++ if (idx > 2) { ++ offset = 0x18; ++ } ++ } ++ ++ port = pci_resource_start(dev, base_idx) + offset; ++ ++ if ((board->flags & SPCI_FL_BASE_TABLE) == 0) ++ port += idx * (board->uart_offset ? board->uart_offset : 8); ++ ++ if (IS_PCI_REGION_IOPORT(dev, base_idx)) { ++ req->port = port; ++ if (HIGH_BITS_OFFSET) ++ req->port_high = port >> HIGH_BITS_OFFSET; ++ else ++ req->port_high = 0; ++ return 0; ++ } ++ req->io_type = SERIAL_IO_MEM; ++ req->iomem_base = ioremap(port, board->uart_offset); ++ req->iomem_reg_shift = board->reg_shift; ++ req->port = 0; ++ return 0; ++} ++ ++static _INLINE_ int get_pci_irq(struct pci_dev *dev, ++ struct pci_board *board, ++ int idx) ++{ ++ int base_idx; ++ ++ if ((board->flags & SPCI_FL_IRQRESOURCE) == 0) ++ return dev->irq; ++ ++ base_idx = SPCI_FL_GET_IRQBASE(board->flags); ++ if (board->flags & SPCI_FL_IRQ_TABLE) ++ base_idx += idx; ++ ++ return PCI_IRQ_RESOURCE(dev, base_idx); ++} ++ ++/* ++ * Common enabler code shared by both PCI and ISAPNP probes ++ */ ++static void __devinit start_pci_pnp_board(struct pci_dev *dev, ++ struct pci_board *board) ++{ ++ int k, line; ++ struct serial_struct serial_req; ++ int base_baud; ++ ++ if (PREPARE_FUNC(dev) && (PREPARE_FUNC(dev))(dev) < 0) { ++ printk("serial: PNP device '"); ++ printk_pnp_dev_id(dev->vendor, dev->device); ++ printk("' prepare failed\n"); ++ return; ++ } ++ ++ if (ACTIVATE_FUNC(dev) && (ACTIVATE_FUNC(dev))(dev) < 0) { ++ printk("serial: PNP device '"); ++ printk_pnp_dev_id(dev->vendor, dev->device); ++ printk("' activate failed\n"); ++ return; ++ } ++ ++ /* ++ * Run the initialization function, if any ++ */ ++ if (board->init_fn && ((board->init_fn)(dev, board, 1) != 0)) ++ return; ++ ++ /* ++ * Register the serial board in the array if we need to ++ * shutdown the board on a module unload or card removal ++ */ ++ if (DEACTIVATE_FUNC(dev) || board->init_fn) { ++ for (k=0; k < NR_PCI_BOARDS; k++) ++ if (serial_pci_board[k].dev == 0) ++ break; ++ if (k >= NR_PCI_BOARDS) ++ return; ++ serial_pci_board[k].board = *board; ++ serial_pci_board[k].dev = dev; ++ } ++ ++ base_baud = board->base_baud; ++ if (!base_baud) ++ base_baud = BASE_BAUD; ++ memset(&serial_req, 0, sizeof(serial_req)); ++ ++ for (k=0; k < board->num_ports; k++) { ++ serial_req.irq = get_pci_irq(dev, board, k); ++ if (get_pci_port(dev, board, &serial_req, k)) ++ break; ++ serial_req.flags = ASYNC_SKIP_TEST | ASYNC_AUTOPROBE; ++#ifdef SERIAL_DEBUG_PCI ++ printk("Setup PCI/PNP port: port %x, irq %d, type %d\n", ++ serial_req.port, serial_req.irq, serial_req.io_type); ++#endif ++ line = register_serial(&serial_req); ++ if (line < 0) ++ break; ++ rs_table[line].baud_base = base_baud; ++ rs_table[line].dev = dev; ++ } ++} ++#endif /* ENABLE_SERIAL_PCI || ENABLE_SERIAL_PNP */ ++ ++#ifdef ENABLE_SERIAL_PCI ++/* ++ * Some PCI serial cards using the PLX 9050 PCI interface chip require ++ * that the card interrupt be explicitly enabled or disabled. This ++ * seems to be mainly needed on card using the PLX which also use I/O ++ * mapped memory. ++ */ ++static int __devinit ++pci_plx9050_fn(struct pci_dev *dev, struct pci_board *board, int enable) ++{ ++ u8 data, *p, irq_config; ++ int pci_config; ++ ++ irq_config = 0x41; ++ pci_config = PCI_COMMAND_MEMORY; ++ if (dev->vendor == PCI_VENDOR_ID_PANACOM) ++ irq_config = 0x43; ++ if ((dev->vendor == PCI_VENDOR_ID_PLX) && ++ (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) { ++ /* ++ * As the megawolf cards have the int pins active ++ * high, and have 2 UART chips, both ints must be ++ * enabled on the 9050. Also, the UARTS are set in ++ * 16450 mode by default, so we have to enable the ++ * 16C950 'enhanced' mode so that we can use the deep ++ * FIFOs ++ */ ++ irq_config = 0x5b; ++ pci_config = PCI_COMMAND_MEMORY | PCI_COMMAND_IO; ++ } ++ ++ pci_read_config_byte(dev, PCI_COMMAND, &data); ++ ++ if (enable) ++ pci_write_config_byte(dev, PCI_COMMAND, ++ data | pci_config); ++ ++ /* enable/disable interrupts */ ++ p = ioremap(pci_resource_start(dev, 0), 0x80); ++ writel(enable ? irq_config : 0x00, (unsigned long)p + 0x4c); ++ iounmap(p); ++ ++ if (!enable) ++ pci_write_config_byte(dev, PCI_COMMAND, ++ data & ~pci_config); ++ return 0; ++} ++ ++ ++/* ++ * SIIG serial cards have an PCI interface chip which also controls ++ * the UART clocking frequency. Each UART can be clocked independently ++ * (except cards equiped with 4 UARTs) and initial clocking settings ++ * are stored in the EEPROM chip. It can cause problems because this ++ * version of serial driver doesn't support differently clocked UART's ++ * on single PCI card. To prevent this, initialization functions set ++ * high frequency clocking for all UART's on given card. It is safe (I ++ * hope) because it doesn't touch EEPROM settings to prevent conflicts ++ * with other OSes (like M$ DOS). ++ * ++ * SIIG support added by Andrey Panin , 10/1999 ++ * ++ * There is two family of SIIG serial cards with different PCI ++ * interface chip and different configuration methods: ++ * - 10x cards have control registers in IO and/or memory space; ++ * - 20x cards have control registers in standard PCI configuration space. ++ * ++ * SIIG initialization functions exported for use by parport_serial.c module. ++ */ ++ ++#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc) ++#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8) ++ ++int __devinit ++pci_siig10x_fn(struct pci_dev *dev, struct pci_board *board, int enable) ++{ ++ u16 data, *p; ++ ++ if (!enable) return 0; ++ ++ p = ioremap(pci_resource_start(dev, 0), 0x80); ++ ++ switch (dev->device & 0xfff8) { ++ case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */ ++ data = 0xffdf; ++ break; ++ case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */ ++ data = 0xf7ff; ++ break; ++ default: /* 1S1P, 4S */ ++ data = 0xfffb; ++ break; ++ } ++ ++ writew(readw((unsigned long) p + 0x28) & data, (unsigned long) p + 0x28); ++ iounmap(p); ++ return 0; ++} ++EXPORT_SYMBOL(pci_siig10x_fn); ++ ++#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc) ++#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc) ++ ++int __devinit ++pci_siig20x_fn(struct pci_dev *dev, struct pci_board *board, int enable) ++{ ++ u8 data; ++ ++ if (!enable) return 0; ++ ++ /* Change clock frequency for the first UART. */ ++ pci_read_config_byte(dev, 0x6f, &data); ++ pci_write_config_byte(dev, 0x6f, data & 0xef); ++ ++ /* If this card has 2 UART, we have to do the same with second UART. */ ++ if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) || ++ ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) { ++ pci_read_config_byte(dev, 0x73, &data); ++ pci_write_config_byte(dev, 0x73, data & 0xef); ++ } ++ return 0; ++} ++EXPORT_SYMBOL(pci_siig20x_fn); ++ ++/* Added for EKF Intel i960 serial boards */ ++static int __devinit ++pci_inteli960ni_fn(struct pci_dev *dev, ++ struct pci_board *board, ++ int enable) ++{ ++ unsigned long oldval; ++ ++ if (!(pci_get_subdevice(dev) & 0x1000)) ++ return(-1); ++ ++ if (!enable) /* is there something to deinit? */ ++ return(0); ++ ++#ifdef SERIAL_DEBUG_PCI ++ printk(KERN_DEBUG " Subsystem ID %lx (intel 960)\n", ++ (unsigned long) board->subdevice); ++#endif ++ /* is firmware started? */ ++ pci_read_config_dword(dev, 0x44, (void*) &oldval); ++ if (oldval == 0x00001000L) { /* RESET value */ ++ printk(KERN_DEBUG "Local i960 firmware missing"); ++ return(-1); ++ } ++ return(0); ++} ++ ++/* ++ * Timedia has an explosion of boards, and to avoid the PCI table from ++ * growing *huge*, we use this function to collapse some 70 entries ++ * in the PCI table into one, for sanity's and compactness's sake. ++ */ ++static unsigned short timedia_single_port[] = { ++ 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0 }; ++static unsigned short timedia_dual_port[] = { ++ 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, ++ 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, ++ 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, ++ 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, ++ 0xD079, 0 }; ++static unsigned short timedia_quad_port[] = { ++ 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, ++ 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, ++ 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, ++ 0xB157, 0 }; ++static unsigned short timedia_eight_port[] = { ++ 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, ++ 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 }; ++static struct timedia_struct { ++ int num; ++ unsigned short *ids; ++} timedia_data[] = { ++ { 1, timedia_single_port }, ++ { 2, timedia_dual_port }, ++ { 4, timedia_quad_port }, ++ { 8, timedia_eight_port }, ++ { 0, 0 } ++}; ++ ++static int __devinit ++pci_timedia_fn(struct pci_dev *dev, struct pci_board *board, int enable) ++{ ++ int i, j; ++ unsigned short *ids; ++ ++ if (!enable) ++ return 0; ++ ++ for (i=0; timedia_data[i].num; i++) { ++ ids = timedia_data[i].ids; ++ for (j=0; ids[j]; j++) { ++ if (pci_get_subdevice(dev) == ids[j]) { ++ board->num_ports = timedia_data[i].num; ++ return 0; ++ } ++ } ++ } ++ return 0; ++} ++ ++/* ++ * HP's Remote Management Console. The Diva chip came in several ++ * different versions. N-class, L2000 and A500 have two Diva chips, each ++ * with 3 UARTs (the third UART on the second chip is unused). Superdome ++ * and Keystone have one Diva chip with 3 UARTs. Some later machines have ++ * one Diva chip, but it has been expanded to 5 UARTs. ++ */ ++static int __devinit ++pci_hp_diva(struct pci_dev *dev, struct pci_board *board, int enable) ++{ ++ if (!enable) ++ return 0; ++ ++ switch (dev->subsystem_device) { ++ case 0x1049: /* Prelude Diva 1 */ ++ case 0x1223: /* Superdome */ ++ case 0x1226: /* Keystone */ ++ case 0x1282: /* Everest / Longs Peak */ ++ board->num_ports = 3; ++ break; ++ case 0x104A: /* Prelude Diva 2 */ ++ board->num_ports = 2; ++ break; ++ case 0x104B: /* Maestro */ ++ board->num_ports = 4; ++ break; ++ case 0x1227: /* Powerbar */ ++ board->num_ports = 1; ++ break; ++ } ++ ++ return 0; ++} ++ ++static int __devinit ++pci_xircom_fn(struct pci_dev *dev, struct pci_board *board, int enable) ++{ ++ __set_current_state(TASK_UNINTERRUPTIBLE); ++ schedule_timeout(HZ/10); ++ return 0; ++} ++ ++/* ++ * This is the configuration table for all of the PCI serial boards ++ * which we support. It is directly indexed by the pci_board_num_t enum ++ * value, which is encoded in the pci_device_id PCI probe table's ++ * driver_data member. ++ */ ++enum pci_board_num_t { ++ pbn_b0_1_115200, ++ pbn_default = 0, ++ ++ pbn_b0_2_115200, ++ pbn_b0_4_115200, ++ ++ pbn_b0_1_921600, ++ pbn_b0_2_921600, ++ pbn_b0_4_921600, ++ ++ pbn_b0_bt_1_115200, ++ pbn_b0_bt_2_115200, ++ pbn_b0_bt_1_460800, ++ pbn_b0_bt_2_460800, ++ pbn_b0_bt_2_921600, ++ ++ pbn_b1_1_115200, ++ pbn_b1_2_115200, ++ pbn_b1_4_115200, ++ pbn_b1_8_115200, ++ ++ pbn_b1_2_921600, ++ pbn_b1_4_921600, ++ pbn_b1_8_921600, ++ ++ pbn_b1_2_1382400, ++ pbn_b1_4_1382400, ++ pbn_b1_8_1382400, ++ ++ pbn_b2_1_115200, ++ pbn_b2_8_115200, ++ pbn_b2_4_460800, ++ pbn_b2_8_460800, ++ pbn_b2_16_460800, ++ pbn_b2_4_921600, ++ pbn_b2_8_921600, ++ ++ pbn_b2_bt_1_115200, ++ pbn_b2_bt_2_115200, ++ pbn_b2_bt_4_115200, ++ pbn_b2_bt_2_921600, ++ ++ pbn_panacom, ++ pbn_panacom2, ++ pbn_panacom4, ++ pbn_plx_romulus, ++ pbn_oxsemi, ++ pbn_timedia, ++ pbn_intel_i960, ++ pbn_sgi_ioc3, ++ pbn_hp_diva, ++#ifdef CONFIG_DDB5074 ++ pbn_nec_nile4, ++#endif ++ ++ pbn_dci_pccom4, ++ pbn_dci_pccom8, ++ ++ pbn_xircom_combo, ++ ++ pbn_siig10x_0, ++ pbn_siig10x_1, ++ pbn_siig10x_2, ++ pbn_siig10x_4, ++ pbn_siig20x_0, ++ pbn_siig20x_2, ++ pbn_siig20x_4, ++ ++ pbn_computone_4, ++ pbn_computone_6, ++ pbn_computone_8, ++}; ++ ++static struct pci_board pci_boards[] __devinitdata = { ++ /* ++ * PCI Flags, Number of Ports, Base (Maximum) Baud Rate, ++ * Offset to get to next UART's registers, ++ * Register shift to use for memory-mapped I/O, ++ * Initialization function, first UART offset ++ */ ++ ++ /* Generic serial board, pbn_b0_1_115200, pbn_default */ ++ { SPCI_FL_BASE0, 1, 115200 }, /* pbn_b0_1_115200, ++ pbn_default */ ++ ++ { SPCI_FL_BASE0, 2, 115200 }, /* pbn_b0_2_115200 */ ++ { SPCI_FL_BASE0, 4, 115200 }, /* pbn_b0_4_115200 */ ++ ++ { SPCI_FL_BASE0, 1, 921600 }, /* pbn_b0_1_921600 */ ++ { SPCI_FL_BASE0, 2, 921600 }, /* pbn_b0_2_921600 */ ++ { SPCI_FL_BASE0, 4, 921600 }, /* pbn_b0_4_921600 */ ++ ++ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 }, /* pbn_b0_bt_1_115200 */ ++ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 }, /* pbn_b0_bt_2_115200 */ ++ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 460800 }, /* pbn_b0_bt_1_460800 */ ++ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 460800 }, /* pbn_b0_bt_2_460800 */ ++ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 921600 }, /* pbn_b0_bt_2_921600 */ ++ ++ { SPCI_FL_BASE1, 1, 115200 }, /* pbn_b1_1_115200 */ ++ { SPCI_FL_BASE1, 2, 115200 }, /* pbn_b1_2_115200 */ ++ { SPCI_FL_BASE1, 4, 115200 }, /* pbn_b1_4_115200 */ ++ { SPCI_FL_BASE1, 8, 115200 }, /* pbn_b1_8_115200 */ ++ ++ { SPCI_FL_BASE1, 2, 921600 }, /* pbn_b1_2_921600 */ ++ { SPCI_FL_BASE1, 4, 921600 }, /* pbn_b1_4_921600 */ ++ { SPCI_FL_BASE1, 8, 921600 }, /* pbn_b1_8_921600 */ ++ ++ { SPCI_FL_BASE1, 2, 1382400 }, /* pbn_b1_2_1382400 */ ++ { SPCI_FL_BASE1, 4, 1382400 }, /* pbn_b1_4_1382400 */ ++ { SPCI_FL_BASE1, 8, 1382400 }, /* pbn_b1_8_1382400 */ ++ ++ { SPCI_FL_BASE2, 1, 115200 }, /* pbn_b2_1_115200 */ ++ { SPCI_FL_BASE2, 8, 115200 }, /* pbn_b2_8_115200 */ ++ { SPCI_FL_BASE2, 4, 460800 }, /* pbn_b2_4_460800 */ ++ { SPCI_FL_BASE2, 8, 460800 }, /* pbn_b2_8_460800 */ ++ { SPCI_FL_BASE2, 16, 460800 }, /* pbn_b2_16_460800 */ ++ { SPCI_FL_BASE2, 4, 921600 }, /* pbn_b2_4_921600 */ ++ { SPCI_FL_BASE2, 8, 921600 }, /* pbn_b2_8_921600 */ ++ ++ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 1, 115200 }, /* pbn_b2_bt_1_115200 */ ++ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 115200 }, /* pbn_b2_bt_2_115200 */ ++ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 4, 115200 }, /* pbn_b2_bt_4_115200 */ ++ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 921600 }, /* pbn_b2_bt_2_921600 */ ++ ++ { SPCI_FL_BASE2, 2, 921600, /* IOMEM */ /* pbn_panacom */ ++ 0x400, 7, pci_plx9050_fn }, ++ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 921600, /* pbn_panacom2 */ ++ 0x400, 7, pci_plx9050_fn }, ++ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 4, 921600, /* pbn_panacom4 */ ++ 0x400, 7, pci_plx9050_fn }, ++ { SPCI_FL_BASE2, 4, 921600, /* pbn_plx_romulus */ ++ 0x20, 2, pci_plx9050_fn, 0x03 }, ++ /* This board uses the size of PCI Base region 0 to ++ * signal now many ports are available */ ++ { SPCI_FL_BASE0 | SPCI_FL_REGION_SZ_CAP, 32, 115200 }, /* pbn_oxsemi */ ++ { SPCI_FL_BASE_TABLE, 1, 921600, /* pbn_timedia */ ++ 0, 0, pci_timedia_fn }, ++ /* EKF addition for i960 Boards form EKF with serial port */ ++ { SPCI_FL_BASE0, 32, 921600, /* max 256 ports */ /* pbn_intel_i960 */ ++ 8<<2, 2, pci_inteli960ni_fn, 0x10000}, ++ { SPCI_FL_BASE0 | SPCI_FL_IRQRESOURCE, /* pbn_sgi_ioc3 */ ++ 1, 458333, 0, 0, 0, 0x20178 }, ++ { SPCI_FL_BASE0, 5, 115200, 8, 0, pci_hp_diva, 0}, /* pbn_hp_diva */ ++#ifdef CONFIG_DDB5074 ++ /* ++ * NEC Vrc-5074 (Nile 4) builtin UART. ++ * Conditionally compiled in since this is a motherboard device. ++ */ ++ { SPCI_FL_BASE0, 1, 520833, /* pbn_nec_nile4 */ ++ 64, 3, NULL, 0x300 }, ++#endif ++ ++ {SPCI_FL_BASE3, 4, 115200, 8}, /* pbn_dci_pccom4 */ ++ {SPCI_FL_BASE3, 8, 115200, 8}, /* pbn_dci_pccom8 */ ++ ++ { SPCI_FL_BASE0, 1, 115200, /* pbn_xircom_combo */ ++ 0, 0, pci_xircom_fn }, ++ ++ { SPCI_FL_BASE2, 1, 460800, /* pbn_siig10x_0 */ ++ 0, 0, pci_siig10x_fn }, ++ { SPCI_FL_BASE2, 1, 921600, /* pbn_siig10x_1 */ ++ 0, 0, pci_siig10x_fn }, ++ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 921600, /* pbn_siig10x_2 */ ++ 0, 0, pci_siig10x_fn }, ++ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 4, 921600, /* pbn_siig10x_4 */ ++ 0, 0, pci_siig10x_fn }, ++ { SPCI_FL_BASE0, 1, 921600, /* pbn_siix20x_0 */ ++ 0, 0, pci_siig20x_fn }, ++ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 921600, /* pbn_siix20x_2 */ ++ 0, 0, pci_siig20x_fn }, ++ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 4, 921600, /* pbn_siix20x_4 */ ++ 0, 0, pci_siig20x_fn }, ++ ++ { SPCI_FL_BASE0, 4, 921600, /* IOMEM */ /* pbn_computone_4 */ ++ 0x40, 2, NULL, 0x200 }, ++ { SPCI_FL_BASE0, 6, 921600, /* IOMEM */ /* pbn_computone_6 */ ++ 0x40, 2, NULL, 0x200 }, ++ { SPCI_FL_BASE0, 8, 921600, /* IOMEM */ /* pbn_computone_8 */ ++ 0x40, 2, NULL, 0x200 }, ++}; ++ ++/* ++ * Given a complete unknown PCI device, try to use some heuristics to ++ * guess what the configuration might be, based on the pitiful PCI ++ * serial specs. Returns 0 on success, 1 on failure. ++ */ ++static int __devinit serial_pci_guess_board(struct pci_dev *dev, ++ struct pci_board *board) ++{ ++ int num_iomem = 0, num_port = 0, first_port = -1; ++ int i; ++ ++ /* ++ * If it is not a communications device or the programming ++ * interface is greater than 6, give up. ++ * ++ * (Should we try to make guesses for multiport serial devices ++ * later?) ++ */ ++ if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) && ++ ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) || ++ (dev->class & 0xff) > 6) ++ return 1; ++ ++ for (i=0; i < 6; i++) { ++ if (IS_PCI_REGION_IOPORT(dev, i)) { ++ num_port++; ++ if (first_port == -1) ++ first_port = i; ++ } ++ if (IS_PCI_REGION_IOMEM(dev, i)) ++ num_iomem++; ++ } ++ ++ /* ++ * If there is 1 or 0 iomem regions, and exactly one port, use ++ * it. ++ */ ++ if (num_iomem <= 1 && num_port == 1) { ++ board->flags = first_port; ++ return 0; ++ } ++ return 1; ++} ++ ++static int __devinit serial_init_one(struct pci_dev *dev, ++ const struct pci_device_id *ent) ++{ ++ struct pci_board *board, tmp; ++ int rc; ++ ++ board = &pci_boards[ent->driver_data]; ++ ++ rc = pci_enable_device(dev); ++ if (rc) return rc; ++ ++ if (ent->driver_data == pbn_default && ++ serial_pci_guess_board(dev, board)) ++ return -ENODEV; ++ else if (serial_pci_guess_board(dev, &tmp) == 0) { ++ printk(KERN_INFO "Redundant entry in serial pci_table. " ++ "Please send the output of\n" ++ "lspci -vv, this message (%04x,%04x,%04x,%04x)\n" ++ "and the manufacturer and name of " ++ "serial board or modem board\n" ++ "to serial-pci-info@lists.sourceforge.net.\n", ++ dev->vendor, dev->device, ++ pci_get_subvendor(dev), pci_get_subdevice(dev)); ++ } ++ ++ start_pci_pnp_board(dev, board); ++ ++ return 0; ++} ++ ++static void __devexit serial_remove_one(struct pci_dev *dev) ++{ ++ int i; ++ ++ /* ++ * Iterate through all of the ports finding those that belong ++ * to this PCI device. ++ */ ++ for(i = 0; i < NR_PORTS; i++) { ++ if (rs_table[i].dev != dev) ++ continue; ++ unregister_serial(i); ++ rs_table[i].dev = 0; ++ } ++ /* ++ * Now execute any board-specific shutdown procedure ++ */ ++ for (i=0; i < NR_PCI_BOARDS; i++) { ++ struct pci_board_inst *brd = &serial_pci_board[i]; ++ ++ if (serial_pci_board[i].dev != dev) ++ continue; ++ if (brd->board.init_fn) ++ (brd->board.init_fn)(brd->dev, &brd->board, 0); ++ if (DEACTIVATE_FUNC(brd->dev)) ++ (DEACTIVATE_FUNC(brd->dev))(brd->dev); ++ serial_pci_board[i].dev = 0; ++ } ++} ++ ++ ++static struct pci_device_id serial_pci_tbl[] __devinitdata = { ++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, ++ PCI_SUBVENDOR_ID_CONNECT_TECH, ++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, ++ pbn_b1_8_1382400 }, ++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, ++ PCI_SUBVENDOR_ID_CONNECT_TECH, ++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, ++ pbn_b1_4_1382400 }, ++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, ++ PCI_SUBVENDOR_ID_CONNECT_TECH, ++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, ++ pbn_b1_2_1382400 }, ++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, ++ PCI_SUBVENDOR_ID_CONNECT_TECH, ++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, ++ pbn_b1_8_1382400 }, ++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, ++ PCI_SUBVENDOR_ID_CONNECT_TECH, ++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, ++ pbn_b1_4_1382400 }, ++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, ++ PCI_SUBVENDOR_ID_CONNECT_TECH, ++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, ++ pbn_b1_2_1382400 }, ++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, ++ PCI_SUBVENDOR_ID_CONNECT_TECH, ++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0, ++ pbn_b1_8_921600 }, ++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, ++ PCI_SUBVENDOR_ID_CONNECT_TECH, ++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0, ++ pbn_b1_8_921600 }, ++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, ++ PCI_SUBVENDOR_ID_CONNECT_TECH, ++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0, ++ pbn_b1_4_921600 }, ++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, ++ PCI_SUBVENDOR_ID_CONNECT_TECH, ++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0, ++ pbn_b1_4_921600 }, ++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, ++ PCI_SUBVENDOR_ID_CONNECT_TECH, ++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0, ++ pbn_b1_2_921600 }, ++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, ++ PCI_SUBVENDOR_ID_CONNECT_TECH, ++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0, ++ pbn_b1_8_921600 }, ++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, ++ PCI_SUBVENDOR_ID_CONNECT_TECH, ++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0, ++ pbn_b1_8_921600 }, ++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, ++ PCI_SUBVENDOR_ID_CONNECT_TECH, ++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0, ++ pbn_b1_4_921600 }, ++ ++ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b2_bt_1_115200 }, ++ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b2_bt_2_115200 }, ++ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b2_bt_4_115200 }, ++ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b2_bt_2_115200 }, ++ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b2_bt_4_115200 }, ++ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b2_8_115200 }, ++ ++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b2_bt_2_115200 }, ++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b2_bt_2_921600 }, ++ /* VScom SPCOM800, from sl@s.pl */ ++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b2_8_921600 }, ++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b2_4_921600 }, ++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, ++ PCI_SUBVENDOR_ID_KEYSPAN, ++ PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0, ++ pbn_panacom }, ++ { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_panacom4 }, ++ { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_panacom2 }, ++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, ++ PCI_SUBVENDOR_ID_CHASE_PCIFAST, ++ PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0, ++ pbn_b2_4_460800 }, ++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, ++ PCI_SUBVENDOR_ID_CHASE_PCIFAST, ++ PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0, ++ pbn_b2_8_460800 }, ++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, ++ PCI_SUBVENDOR_ID_CHASE_PCIFAST, ++ PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0, ++ pbn_b2_16_460800 }, ++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, ++ PCI_SUBVENDOR_ID_CHASE_PCIFAST, ++ PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0, ++ pbn_b2_16_460800 }, ++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, ++ PCI_SUBVENDOR_ID_CHASE_PCIRAS, ++ PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0, ++ pbn_b2_4_460800 }, ++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, ++ PCI_SUBVENDOR_ID_CHASE_PCIRAS, ++ PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, ++ pbn_b2_8_460800 }, ++ /* Megawolf Romulus PCI Serial Card, from Mike Hudson */ ++ /* (Exoray@isys.ca) */ ++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS, ++ 0x10b5, 0x106a, 0, 0, ++ pbn_plx_romulus }, ++ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b1_4_115200 }, ++ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b1_2_115200 }, ++ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b1_8_115200 }, ++ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b1_8_115200 }, ++ { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954, ++ PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0, ++ pbn_b0_4_921600 }, ++ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b0_4_115200 }, ++ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b0_bt_2_921600 }, ++ ++ /* Digitan DS560-558, from jimd@esoft.com */ ++ { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b1_1_115200 }, ++ ++ /* 3Com US Robotics 56k Voice Internal PCI model 5610 */ ++ { PCI_VENDOR_ID_USR, 0x1008, ++ PCI_ANY_ID, PCI_ANY_ID, }, ++ ++ /* Titan Electronic cards */ ++ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b0_1_921600 }, ++ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b0_2_921600 }, ++ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b0_4_921600 }, ++ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b0_4_921600 }, ++ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L, ++ PCI_ANY_ID, PCI_ANY_ID, ++ SPCI_FL_BASE1, 1, 921600 }, ++ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L, ++ PCI_ANY_ID, PCI_ANY_ID, ++ SPCI_FL_BASE1 | SPCI_FL_BASE_TABLE, 2, 921600 }, ++ /* The 400L and 800L have a custom hack in get_pci_port */ ++ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L, ++ PCI_ANY_ID, PCI_ANY_ID, ++ SPCI_FL_BASE_TABLE, 4, 921600 }, ++ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L, ++ PCI_ANY_ID, PCI_ANY_ID, ++ SPCI_FL_BASE_TABLE, 8, 921600 }, ++ ++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_siig10x_0 }, ++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_siig10x_0 }, ++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_siig10x_0 }, ++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_siig10x_2 }, ++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_siig10x_2 }, ++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_siig10x_2 }, ++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_siig10x_4 }, ++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_siig10x_4 }, ++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_siig10x_4 }, ++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_siig20x_0 }, ++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_siig20x_0 }, ++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_siig20x_0 }, ++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_siig20x_2 }, ++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_siig20x_2 }, ++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_siig20x_2 }, ++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_siig20x_4 }, ++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_siig20x_4 }, ++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_siig20x_4 }, ++ ++ /* Computone devices submitted by Doug McNash dmcnash@computone.com */ ++ { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, ++ PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4, ++ 0, 0, pbn_computone_4 }, ++ { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, ++ PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8, ++ 0, 0, pbn_computone_8 }, ++ { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, ++ PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6, ++ 0, 0, pbn_computone_6 }, ++ ++ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_oxsemi }, ++ { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889, ++ PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0, pbn_timedia }, ++ ++ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b0_bt_2_115200 }, ++ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b0_bt_2_115200 }, ++ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b0_bt_2_115200 }, ++ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b0_bt_2_460800 }, ++ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b0_bt_2_460800 }, ++ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b0_bt_2_460800 }, ++ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b0_bt_1_115200 }, ++ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b0_bt_1_460800 }, ++ ++ /* RAStel 2 port modem, gerg@moreton.com.au */ ++ { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b2_bt_2_115200 }, ++ ++ /* EKF addition for i960 Boards form EKF with serial port */ ++ { PCI_VENDOR_ID_INTEL, 0x1960, ++ 0xE4BF, PCI_ANY_ID, 0, 0, ++ pbn_intel_i960 }, ++ ++ /* Xircom Cardbus/Ethernet combos */ ++ { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_xircom_combo }, ++ ++ /* ++ * Untested PCI modems, sent in from various folks... ++ */ ++ ++ /* Elsa Model 56K PCI Modem, from Andreas Rath */ ++ { PCI_VENDOR_ID_ROCKWELL, 0x1004, ++ 0x1048, 0x1500, 0, 0, ++ pbn_b1_1_115200 }, ++ ++ { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, ++ 0xFF00, 0, 0, 0, ++ pbn_sgi_ioc3 }, ++ ++ /* HP Diva card */ ++ { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_SAS, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_hp_diva }, ++ { PCI_VENDOR_ID_HP, 0x1290, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_b2_1_115200 }, ++ ++#ifdef CONFIG_DDB5074 ++ /* ++ * NEC Vrc-5074 (Nile 4) builtin UART. ++ * Conditionally compiled in since this is a motherboard device. ++ */ ++ { PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_NILE4, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_nec_nile4 }, ++#endif ++ ++ { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_dci_pccom4 }, ++ { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8, ++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, ++ pbn_dci_pccom8 }, ++ ++ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, ++ PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xffff00, }, ++ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, ++ PCI_CLASS_COMMUNICATION_MODEM << 8, 0xffff00, }, ++ { 0, } ++}; ++ ++MODULE_DEVICE_TABLE(pci, serial_pci_tbl); ++ ++static struct pci_driver serial_pci_driver = { ++ name: "serial", ++ probe: serial_init_one, ++ remove: __devexit_p(serial_remove_one), ++ id_table: serial_pci_tbl, ++}; ++ ++ ++/* ++ * Query PCI space for known serial boards ++ * If found, add them to the PCI device space in rs_table[] ++ * ++ * Accept a maximum of eight boards ++ * ++ */ ++static void __devinit probe_serial_pci(void) ++{ ++#ifdef SERIAL_DEBUG_PCI ++ printk(KERN_DEBUG "Entered probe_serial_pci()\n"); ++#endif ++ ++ /* Register call PCI serial devices. Null out ++ * the driver name upon failure, as a signal ++ * not to attempt to unregister the driver later ++ */ ++ if (pci_module_init (&serial_pci_driver) != 0) ++ serial_pci_driver.name = ""; ++ ++#ifdef SERIAL_DEBUG_PCI ++ printk(KERN_DEBUG "Leaving probe_serial_pci() (probe finished)\n"); ++#endif ++ return; ++} ++ ++#endif /* ENABLE_SERIAL_PCI */ ++ ++#ifdef ENABLE_SERIAL_PNP ++ ++struct pnp_board { ++ unsigned short vendor; ++ unsigned short device; ++}; ++ ++static struct pnp_board pnp_devices[] __devinitdata = { ++ /* Archtek America Corp. */ ++ /* Archtek SmartLink Modem 3334BT Plug & Play */ ++ { ISAPNP_VENDOR('A', 'A', 'C'), ISAPNP_DEVICE(0x000F) }, ++ /* Anchor Datacomm BV */ ++ /* SXPro 144 External Data Fax Modem Plug & Play */ ++ { ISAPNP_VENDOR('A', 'D', 'C'), ISAPNP_DEVICE(0x0001) }, ++ /* SXPro 288 External Data Fax Modem Plug & Play */ ++ { ISAPNP_VENDOR('A', 'D', 'C'), ISAPNP_DEVICE(0x0002) }, ++ /* Rockwell 56K ACF II Fax+Data+Voice Modem */ ++ { ISAPNP_VENDOR('A', 'K', 'Y'), ISAPNP_DEVICE(0x1021) }, ++ /* AZT3005 PnP SOUND DEVICE */ ++ { ISAPNP_VENDOR('A', 'Z', 'T'), ISAPNP_DEVICE(0x4001) }, ++ /* Best Data Products Inc. Smart One 336F PnP Modem */ ++ { ISAPNP_VENDOR('B', 'D', 'P'), ISAPNP_DEVICE(0x3336) }, ++ /* Boca Research */ ++ /* Boca Complete Ofc Communicator 14.4 Data-FAX */ ++ { ISAPNP_VENDOR('B', 'R', 'I'), ISAPNP_DEVICE(0x0A49) }, ++ /* Boca Research 33,600 ACF Modem */ ++ { ISAPNP_VENDOR('B', 'R', 'I'), ISAPNP_DEVICE(0x1400) }, ++ /* Boca 33.6 Kbps Internal FD34FSVD */ ++ { ISAPNP_VENDOR('B', 'R', 'I'), ISAPNP_DEVICE(0x3400) }, ++ /* Boca 33.6 Kbps Internal FD34FSVD */ ++ { ISAPNP_VENDOR('B', 'R', 'I'), ISAPNP_DEVICE(0x0A49) }, ++ /* Best Data Products Inc. Smart One 336F PnP Modem */ ++ { ISAPNP_VENDOR('B', 'D', 'P'), ISAPNP_DEVICE(0x3336) }, ++ /* Computer Peripherals Inc */ ++ /* EuroViVa CommCenter-33.6 SP PnP */ ++ { ISAPNP_VENDOR('C', 'P', 'I'), ISAPNP_DEVICE(0x4050) }, ++ /* Creative Labs */ ++ /* Creative Labs Phone Blaster 28.8 DSVD PnP Voice */ ++ { ISAPNP_VENDOR('C', 'T', 'L'), ISAPNP_DEVICE(0x3001) }, ++ /* Creative Labs Modem Blaster 28.8 DSVD PnP Voice */ ++ { ISAPNP_VENDOR('C', 'T', 'L'), ISAPNP_DEVICE(0x3011) }, ++ /* Creative */ ++ /* Creative Modem Blaster Flash56 DI5601-1 */ ++ { ISAPNP_VENDOR('D', 'M', 'B'), ISAPNP_DEVICE(0x1032) }, ++ /* Creative Modem Blaster V.90 DI5660 */ ++ { ISAPNP_VENDOR('D', 'M', 'B'), ISAPNP_DEVICE(0x2001) }, ++ /* FUJITSU */ ++ /* Fujitsu 33600 PnP-I2 R Plug & Play */ ++ { ISAPNP_VENDOR('F', 'U', 'J'), ISAPNP_DEVICE(0x0202) }, ++ /* Fujitsu FMV-FX431 Plug & Play */ ++ { ISAPNP_VENDOR('F', 'U', 'J'), ISAPNP_DEVICE(0x0205) }, ++ /* Fujitsu 33600 PnP-I4 R Plug & Play */ ++ { ISAPNP_VENDOR('F', 'U', 'J'), ISAPNP_DEVICE(0x0206) }, ++ /* Fujitsu Fax Voice 33600 PNP-I5 R Plug & Play */ ++ { ISAPNP_VENDOR('F', 'U', 'J'), ISAPNP_DEVICE(0x0209) }, ++ /* Archtek America Corp. */ ++ /* Archtek SmartLink Modem 3334BT Plug & Play */ ++ { ISAPNP_VENDOR('G', 'V', 'C'), ISAPNP_DEVICE(0x000F) }, ++ /* Hayes */ ++ /* Hayes Optima 288 V.34-V.FC + FAX + Voice Plug & Play */ ++ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x0001) }, ++ /* Hayes Optima 336 V.34 + FAX + Voice PnP */ ++ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x000C) }, ++ /* Hayes Optima 336B V.34 + FAX + Voice PnP */ ++ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x000D) }, ++ /* Hayes Accura 56K Ext Fax Modem PnP */ ++ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x5670) }, ++ /* Hayes Accura 56K Ext Fax Modem PnP */ ++ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x5674) }, ++ /* Hayes Accura 56K Fax Modem PnP */ ++ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x5675) }, ++ /* Hayes 288, V.34 + FAX */ ++ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0xF000) }, ++ /* Hayes Optima 288 V.34 + FAX + Voice, Plug & Play */ ++ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0xF001) }, ++ /* IBM */ ++ /* IBM Thinkpad 701 Internal Modem Voice */ ++ { ISAPNP_VENDOR('I', 'B', 'M'), ISAPNP_DEVICE(0x0033) }, ++ /* Intertex */ ++ /* Intertex 28k8 33k6 Voice EXT PnP */ ++ { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xC801) }, ++ /* Intertex 33k6 56k Voice EXT PnP */ ++ { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xC901) }, ++ /* Intertex 28k8 33k6 Voice SP EXT PnP */ ++ { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xD801) }, ++ /* Intertex 33k6 56k Voice SP EXT PnP */ ++ { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xD901) }, ++ /* Intertex 28k8 33k6 Voice SP INT PnP */ ++ { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xF401) }, ++ /* Intertex 28k8 33k6 Voice SP EXT PnP */ ++ { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xF801) }, ++ /* Intertex 33k6 56k Voice SP EXT PnP */ ++ { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xF901) }, ++ /* Kortex International */ ++ /* KORTEX 28800 Externe PnP */ ++ { ISAPNP_VENDOR('K', 'O', 'R'), ISAPNP_DEVICE(0x4522) }, ++ /* KXPro 33.6 Vocal ASVD PnP */ ++ { ISAPNP_VENDOR('K', 'O', 'R'), ISAPNP_DEVICE(0xF661) }, ++ /* Lasat */ ++ /* LASAT Internet 33600 PnP */ ++ { ISAPNP_VENDOR('L', 'A', 'S'), ISAPNP_DEVICE(0x4040) }, ++ /* Lasat Safire 560 PnP */ ++ { ISAPNP_VENDOR('L', 'A', 'S'), ISAPNP_DEVICE(0x4540) }, ++ /* Lasat Safire 336 PnP */ ++ { ISAPNP_VENDOR('L', 'A', 'S'), ISAPNP_DEVICE(0x5440) }, ++ /* Microcom, Inc. */ ++ /* Microcom TravelPorte FAST V.34 Plug & Play */ ++ { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x281) }, ++ /* Microcom DeskPorte V.34 FAST or FAST+ Plug & Play */ ++ { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0336) }, ++ /* Microcom DeskPorte FAST EP 28.8 Plug & Play */ ++ { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0339) }, ++ /* Microcom DeskPorte 28.8P Plug & Play */ ++ { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0342) }, ++ /* Microcom DeskPorte FAST ES 28.8 Plug & Play */ ++ { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0500) }, ++ /* Microcom DeskPorte FAST ES 28.8 Plug & Play */ ++ { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0501) }, ++ /* Microcom DeskPorte 28.8S Internal Plug & Play */ ++ { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0502) }, ++ /* Motorola */ ++ /* Motorola BitSURFR Plug & Play */ ++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1105) }, ++ /* Motorola TA210 Plug & Play */ ++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1111) }, ++ /* Motorola HMTA 200 (ISDN) Plug & Play */ ++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1114) }, ++ /* Motorola BitSURFR Plug & Play */ ++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1115) }, ++ /* Motorola Lifestyle 28.8 Internal */ ++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1190) }, ++ /* Motorola V.3400 Plug & Play */ ++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1501) }, ++ /* Motorola Lifestyle 28.8 V.34 Plug & Play */ ++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1502) }, ++ /* Motorola Power 28.8 V.34 Plug & Play */ ++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1505) }, ++ /* Motorola ModemSURFR External 28.8 Plug & Play */ ++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1509) }, ++ /* Motorola Premier 33.6 Desktop Plug & Play */ ++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x150A) }, ++ /* Motorola VoiceSURFR 56K External PnP */ ++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x150F) }, ++ /* Motorola ModemSURFR 56K External PnP */ ++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1510) }, ++ /* Motorola ModemSURFR 56K Internal PnP */ ++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1550) }, ++ /* Motorola ModemSURFR Internal 28.8 Plug & Play */ ++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1560) }, ++ /* Motorola Premier 33.6 Internal Plug & Play */ ++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1580) }, ++ /* Motorola OnlineSURFR 28.8 Internal Plug & Play */ ++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x15B0) }, ++ /* Motorola VoiceSURFR 56K Internal PnP */ ++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x15F0) }, ++ /* Com 1 */ ++ /* Deskline K56 Phone System PnP */ ++ { ISAPNP_VENDOR('M', 'V', 'X'), ISAPNP_DEVICE(0x00A1) }, ++ /* PC Rider K56 Phone System PnP */ ++ { ISAPNP_VENDOR('M', 'V', 'X'), ISAPNP_DEVICE(0x00F2) }, ++ /* Pace 56 Voice Internal Plug & Play Modem */ ++ { ISAPNP_VENDOR('P', 'M', 'C'), ISAPNP_DEVICE(0x2430) }, ++ /* Generic */ ++ /* Generic standard PC COM port */ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0x0500) }, ++ /* Generic 16550A-compatible COM port */ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0x0501) }, ++ /* Compaq 14400 Modem */ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC000) }, ++ /* Compaq 2400/9600 Modem */ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC001) }, ++ /* Dial-Up Networking Serial Cable between 2 PCs */ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC031) }, ++ /* Dial-Up Networking Parallel Cable between 2 PCs */ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC032) }, ++ /* Standard 9600 bps Modem */ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC100) }, ++ /* Standard 14400 bps Modem */ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC101) }, ++ /* Standard 28800 bps Modem*/ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC102) }, ++ /* Standard Modem*/ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC103) }, ++ /* Standard 9600 bps Modem*/ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC104) }, ++ /* Standard 14400 bps Modem*/ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC105) }, ++ /* Standard 28800 bps Modem*/ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC106) }, ++ /* Standard Modem */ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC107) }, ++ /* Standard 9600 bps Modem */ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC108) }, ++ /* Standard 14400 bps Modem */ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC109) }, ++ /* Standard 28800 bps Modem */ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10A) }, ++ /* Standard Modem */ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10B) }, ++ /* Standard 9600 bps Modem */ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10C) }, ++ /* Standard 14400 bps Modem */ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10D) }, ++ /* Standard 28800 bps Modem */ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10E) }, ++ /* Standard Modem */ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10F) }, ++ /* Standard PCMCIA Card Modem */ ++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0x2000) }, ++ /* Rockwell */ ++ /* Modular Technology */ ++ /* Rockwell 33.6 DPF Internal PnP */ ++ /* Modular Technology 33.6 Internal PnP */ ++ { ISAPNP_VENDOR('R', 'O', 'K'), ISAPNP_DEVICE(0x0030) }, ++ /* Kortex International */ ++ /* KORTEX 14400 Externe PnP */ ++ { ISAPNP_VENDOR('R', 'O', 'K'), ISAPNP_DEVICE(0x0100) }, ++ /* Viking Components, Inc */ ++ /* Viking 28.8 INTERNAL Fax+Data+Voice PnP */ ++ { ISAPNP_VENDOR('R', 'O', 'K'), ISAPNP_DEVICE(0x4920) }, ++ /* Rockwell */ ++ /* British Telecom */ ++ /* Modular Technology */ ++ /* Rockwell 33.6 DPF External PnP */ ++ /* BT Prologue 33.6 External PnP */ ++ /* Modular Technology 33.6 External PnP */ ++ { ISAPNP_VENDOR('R', 'S', 'S'), ISAPNP_DEVICE(0x00A0) }, ++ /* Viking 56K FAX INT */ ++ { ISAPNP_VENDOR('R', 'S', 'S'), ISAPNP_DEVICE(0x0262) }, ++ /* SupraExpress 28.8 Data/Fax PnP modem */ ++ { ISAPNP_VENDOR('S', 'U', 'P'), ISAPNP_DEVICE(0x1310) }, ++ /* SupraExpress 33.6 Data/Fax PnP modem */ ++ { ISAPNP_VENDOR('S', 'U', 'P'), ISAPNP_DEVICE(0x1421) }, ++ /* SupraExpress 33.6 Data/Fax PnP modem */ ++ { ISAPNP_VENDOR('S', 'U', 'P'), ISAPNP_DEVICE(0x1590) }, ++ /* SupraExpress 33.6 Data/Fax PnP modem */ ++ { ISAPNP_VENDOR('S', 'U', 'P'), ISAPNP_DEVICE(0x1760) }, ++ /* Phoebe Micro */ ++ /* Phoebe Micro 33.6 Data Fax 1433VQH Plug & Play */ ++ { ISAPNP_VENDOR('T', 'E', 'X'), ISAPNP_DEVICE(0x0011) }, ++ /* Archtek America Corp. */ ++ /* Archtek SmartLink Modem 3334BT Plug & Play */ ++ { ISAPNP_VENDOR('U', 'A', 'C'), ISAPNP_DEVICE(0x000F) }, ++ /* 3Com Corp. */ ++ /* Gateway Telepath IIvi 33.6 */ ++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x0000) }, ++ /* Sportster Vi 14.4 PnP FAX Voicemail */ ++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x0004) }, ++ /* U.S. Robotics 33.6K Voice INT PnP */ ++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x0006) }, ++ /* U.S. Robotics 33.6K Voice EXT PnP */ ++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x0007) }, ++ /* U.S. Robotics 33.6K Voice INT PnP */ ++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x2002) }, ++ /* U.S. Robotics 56K Voice INT PnP */ ++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x2070) }, ++ /* U.S. Robotics 56K Voice EXT PnP */ ++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x2080) }, ++ /* U.S. Robotics 56K FAX INT */ ++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x3031) }, ++ /* U.S. Robotics 56K Voice INT PnP */ ++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x3070) }, ++ /* U.S. Robotics 56K Voice EXT PnP */ ++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x3080) }, ++ /* U.S. Robotics 56K Voice INT PnP */ ++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x3090) }, ++ /* U.S. Robotics 56K Message */ ++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x9100) }, ++ /* U.S. Robotics 56K FAX EXT PnP*/ ++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x9160) }, ++ /* U.S. Robotics 56K FAX INT PnP*/ ++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x9170) }, ++ /* U.S. Robotics 56K Voice EXT PnP*/ ++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x9180) }, ++ /* U.S. Robotics 56K Voice INT PnP*/ ++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x9190) }, ++ { 0, } ++}; ++ ++static inline void avoid_irq_share(struct pci_dev *dev) ++{ ++ int i, map = 0x1FF8; ++ struct serial_state *state = rs_table; ++ struct isapnp_irq *irq; ++ struct isapnp_resources *res = dev->sysdata; ++ ++ for (i = 0; i < NR_PORTS; i++) { ++ if (state->type != PORT_UNKNOWN) ++ clear_bit(state->irq, &map); ++ state++; ++ } ++ ++ for ( ; res; res = res->alt) ++ for(irq = res->irq; irq; irq = irq->next) ++ irq->map = map; ++} ++ ++static char *modem_names[] __devinitdata = { ++ "MODEM", "Modem", "modem", "FAX", "Fax", "fax", ++ "56K", "56k", "K56", "33.6", "28.8", "14.4", ++ "33,600", "28,800", "14,400", "33.600", "28.800", "14.400", ++ "33600", "28800", "14400", "V.90", "V.34", "V.32", 0 ++}; ++ ++static int __devinit check_name(char *name) ++{ ++ char **tmp = modem_names; ++ ++ while (*tmp) { ++ if (strstr(name, *tmp)) ++ return 1; ++ tmp++; ++ } ++ return 0; ++} ++ ++static inline int check_compatible_id(struct pci_dev *dev) ++{ ++ int i; ++ for (i = 0; i < DEVICE_COUNT_COMPATIBLE; i++) ++ if ((dev->vendor_compatible[i] == ++ ISAPNP_VENDOR('P', 'N', 'P')) && ++ (swab16(dev->device_compatible[i]) >= 0xc000) && ++ (swab16(dev->device_compatible[i]) <= 0xdfff)) ++ return 0; ++ return 1; ++} ++ ++/* ++ * Given a complete unknown ISA PnP device, try to use some heuristics to ++ * detect modems. Currently use such heuristic set: ++ * - dev->name or dev->bus->name must contain "modem" substring; ++ * - device must have only one IO region (8 byte long) with base adress ++ * 0x2e8, 0x3e8, 0x2f8 or 0x3f8. ++ * ++ * Such detection looks very ugly, but can detect at least some of numerous ++ * ISA PnP modems, alternatively we must hardcode all modems in pnp_devices[] ++ * table. ++ */ ++static int _INLINE_ serial_pnp_guess_board(struct pci_dev *dev, ++ struct pci_board *board) ++{ ++ struct isapnp_resources *res = (struct isapnp_resources *)dev->sysdata; ++ struct isapnp_resources *resa; ++ ++ if (!(check_name(dev->name) || check_name(dev->bus->name)) && ++ !(check_compatible_id(dev))) ++ return 1; ++ ++ if (!res || res->next) ++ return 1; ++ ++ for (resa = res->alt; resa; resa = resa->alt) { ++ struct isapnp_port *port; ++ for (port = res->port; port; port = port->next) ++ if ((port->size == 8) && ++ ((port->min == 0x2f8) || ++ (port->min == 0x3f8) || ++ (port->min == 0x2e8) || ++ (port->min == 0x3e8))) ++ return 0; ++ } ++ ++ return 1; ++} ++ ++static void __devinit probe_serial_pnp(void) ++{ ++ struct pci_dev *dev = NULL; ++ struct pnp_board *pnp_board; ++ struct pci_board board; ++ ++#ifdef SERIAL_DEBUG_PNP ++ printk("Entered probe_serial_pnp()\n"); ++#endif ++ if (!isapnp_present()) { ++#ifdef SERIAL_DEBUG_PNP ++ printk("Leaving probe_serial_pnp() (no isapnp)\n"); ++#endif ++ return; ++ } ++ ++ isapnp_for_each_dev(dev) { ++ if (dev->active) ++ continue; ++ ++ memset(&board, 0, sizeof(board)); ++ board.flags = SPCI_FL_BASE0 | SPCI_FL_PNPDEFAULT; ++ board.num_ports = 1; ++ board.base_baud = 115200; ++ ++ for (pnp_board = pnp_devices; pnp_board->vendor; pnp_board++) ++ if ((dev->vendor == pnp_board->vendor) && ++ (dev->device == pnp_board->device)) ++ break; ++ ++ if (pnp_board->vendor) { ++ /* Special case that's more efficient to hardcode */ ++ if ((pnp_board->vendor == ISAPNP_VENDOR('A', 'K', 'Y') && ++ pnp_board->device == ISAPNP_DEVICE(0x1021))) ++ board.flags |= SPCI_FL_NO_SHIRQ; ++ } else { ++ if (serial_pnp_guess_board(dev, &board)) ++ continue; ++ } ++ ++ if (board.flags & SPCI_FL_NO_SHIRQ) ++ avoid_irq_share(dev); ++ start_pci_pnp_board(dev, &board); ++ } ++ ++#ifdef SERIAL_DEBUG_PNP ++ printk("Leaving probe_serial_pnp() (probe finished)\n"); ++#endif ++ return; ++} ++ ++#endif /* ENABLE_SERIAL_PNP */ ++ ++/* ++ * The serial driver boot-time initialization code! ++ */ ++static int __init rs_init(void) ++{ ++ int i; ++ struct serial_state * state; ++ ++ init_bh(SERIAL_BH, do_serial_bh); ++ init_timer(&serial_timer); ++ serial_timer.function = rs_timer; ++ mod_timer(&serial_timer, jiffies + RS_STROBE_TIME); ++ ++ for (i = 0; i < NR_IRQS; i++) { ++ IRQ_ports[i] = 0; ++ IRQ_timeout[i] = 0; ++#ifdef CONFIG_SERIAL_MULTIPORT ++ memset(&rs_multiport[i], 0, ++ sizeof(struct rs_multiport_struct)); ++#endif ++ } ++ show_serial_version(); ++ ++ /* Initialize the tty_driver structure */ ++ ++ memset(&serial_driver, 0, sizeof(struct tty_driver)); ++ serial_driver.magic = TTY_DRIVER_MAGIC; ++#if (LINUX_VERSION_CODE > 0x20100) ++ serial_driver.driver_name = "serial"; ++#endif ++#if (LINUX_VERSION_CODE > 0x2032D && defined(CONFIG_DEVFS_FS)) ++ serial_driver.name = "tts/%d"; ++#else ++ serial_driver.name = "ttyS"; ++#endif ++ serial_driver.major = TTY_MAJOR; ++ serial_driver.minor_start = 64 + SERIAL_DEV_OFFSET; ++ serial_driver.name_base = SERIAL_DEV_OFFSET; ++ serial_driver.num = NR_PORTS; ++ serial_driver.type = TTY_DRIVER_TYPE_SERIAL; ++ serial_driver.subtype = SERIAL_TYPE_NORMAL; ++ serial_driver.init_termios = tty_std_termios; ++ serial_driver.init_termios.c_cflag = ++ B9600 | CS8 | CREAD | HUPCL | CLOCAL; ++ serial_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS; ++ serial_driver.refcount = &serial_refcount; ++ serial_driver.table = serial_table; ++ serial_driver.termios = serial_termios; ++ serial_driver.termios_locked = serial_termios_locked; ++ ++ serial_driver.open = rs_open; ++ serial_driver.close = rs_close; ++ serial_driver.write = rs_write; ++ serial_driver.put_char = rs_put_char; ++ serial_driver.flush_chars = rs_flush_chars; ++ serial_driver.write_room = rs_write_room; ++ serial_driver.chars_in_buffer = rs_chars_in_buffer; ++ serial_driver.flush_buffer = rs_flush_buffer; ++ serial_driver.ioctl = rs_ioctl; ++ serial_driver.throttle = rs_throttle; ++ serial_driver.unthrottle = rs_unthrottle; ++ serial_driver.set_termios = rs_set_termios; ++ serial_driver.stop = rs_stop; ++ serial_driver.start = rs_start; ++ serial_driver.hangup = rs_hangup; ++#if (LINUX_VERSION_CODE >= 131394) /* Linux 2.1.66 */ ++ serial_driver.break_ctl = rs_break; ++#endif ++#if (LINUX_VERSION_CODE >= 131343) ++ serial_driver.send_xchar = rs_send_xchar; ++ serial_driver.wait_until_sent = rs_wait_until_sent; ++ serial_driver.read_proc = rs_read_proc; ++#endif ++ ++ /* ++ * The callout device is just like normal device except for ++ * major number and the subtype code. ++ */ ++ callout_driver = serial_driver; ++#if (LINUX_VERSION_CODE > 0x2032D && defined(CONFIG_DEVFS_FS)) ++ callout_driver.name = "cua/%d"; ++#else ++ callout_driver.name = "cua"; ++#endif ++ callout_driver.major = TTYAUX_MAJOR; ++ callout_driver.subtype = SERIAL_TYPE_CALLOUT; ++#if (LINUX_VERSION_CODE >= 131343) ++ callout_driver.read_proc = 0; ++ callout_driver.proc_entry = 0; ++#endif ++ ++ if (tty_register_driver(&serial_driver)) ++ panic("Couldn't register serial driver\n"); ++ if (tty_register_driver(&callout_driver)) ++ panic("Couldn't register callout driver\n"); ++ ++ for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) { ++ state->magic = SSTATE_MAGIC; ++ state->line = i; ++ state->type = PORT_UNKNOWN; ++ state->custom_divisor = 0; ++ state->close_delay = 5*HZ/10; ++ state->closing_wait = 30*HZ; ++ state->callout_termios = callout_driver.init_termios; ++ state->normal_termios = serial_driver.init_termios; ++ state->icount.cts = state->icount.dsr = ++ state->icount.rng = state->icount.dcd = 0; ++ state->icount.rx = state->icount.tx = 0; ++ state->icount.frame = state->icount.parity = 0; ++ state->icount.overrun = state->icount.brk = 0; ++ state->irq = irq_cannonicalize(state->irq); ++ if (state->hub6) ++ state->io_type = SERIAL_IO_HUB6; ++ if (state->port && check_region(state->port,8)) ++ continue; ++#ifdef CONFIG_MCA ++ if ((state->flags & ASYNC_BOOT_ONLYMCA) && !MCA_bus) ++ continue; ++#endif ++ if (state->flags & ASYNC_BOOT_AUTOCONF) ++ autoconfig(state); ++ } ++ for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) { ++ if (state->type == PORT_UNKNOWN) ++ continue; ++ if ( (state->flags & ASYNC_BOOT_AUTOCONF) ++ && (state->flags & ASYNC_AUTO_IRQ) ++ && (state->port != 0 || state->iomem_base != 0)) ++ state->irq = detect_uart_irq(state); ++ if (state->io_type == SERIAL_IO_MEM) { ++ printk(KERN_INFO"ttyS%02d%s at 0x%p (irq = %d) is a %s\n", ++ state->line + SERIAL_DEV_OFFSET, ++ (state->flags & ASYNC_FOURPORT) ? " FourPort" : "", ++ state->iomem_base, state->irq, ++ uart_config[state->type].name); ++ } ++ else { ++ printk(KERN_INFO "ttyS%02d%s at 0x%04lx (irq = %d) is a %s\n", ++ state->line + SERIAL_DEV_OFFSET, ++ (state->flags & ASYNC_FOURPORT) ? " FourPort" : "", ++ state->port, state->irq, ++ uart_config[state->type].name); ++ } ++ tty_register_devfs(&serial_driver, 0, ++ serial_driver.minor_start + state->line); ++ tty_register_devfs(&callout_driver, 0, ++ callout_driver.minor_start + state->line); ++ } ++#ifdef ENABLE_SERIAL_PCI ++ probe_serial_pci(); ++#endif ++#ifdef ENABLE_SERIAL_PNP ++ probe_serial_pnp(); ++#endif ++ return 0; ++} ++ ++/* ++ * This is for use by architectures that know their serial console ++ * attributes only at run time. Not to be invoked after rs_init(). ++ */ ++int __init early_serial_setup(struct serial_struct *req) ++{ ++ int i = req->line; ++ ++ if (i >= NR_IRQS) ++ return(-ENOENT); ++ rs_table[i].magic = 0; ++ rs_table[i].baud_base = req->baud_base; ++ rs_table[i].port = req->port; ++ if (HIGH_BITS_OFFSET) ++ rs_table[i].port += (unsigned long) req->port_high << ++ HIGH_BITS_OFFSET; ++ rs_table[i].irq = req->irq; ++ rs_table[i].flags = req->flags; ++ rs_table[i].close_delay = req->close_delay; ++ rs_table[i].io_type = req->io_type; ++ rs_table[i].hub6 = req->hub6; ++ rs_table[i].iomem_base = req->iomem_base; ++ rs_table[i].iomem_reg_shift = req->iomem_reg_shift; ++ rs_table[i].type = req->type; ++ rs_table[i].xmit_fifo_size = req->xmit_fifo_size; ++ rs_table[i].custom_divisor = req->custom_divisor; ++ rs_table[i].closing_wait = req->closing_wait; ++ return(0); ++} ++ ++/* ++ * register_serial and unregister_serial allows for 16x50 serial ports to be ++ * configured at run-time, to support PCMCIA modems. ++ */ ++ ++/** ++ * register_serial - configure a 16x50 serial port at runtime ++ * @req: request structure ++ * ++ * Configure the serial port specified by the request. If the ++ * port exists and is in use an error is returned. If the port ++ * is not currently in the table it is added. ++ * ++ * The port is then probed and if neccessary the IRQ is autodetected ++ * If this fails an error is returned. ++ * ++ * On success the port is ready to use and the line number is returned. ++ */ ++ ++int register_serial(struct serial_struct *req) ++{ ++ int i; ++ unsigned long flags; ++ struct serial_state *state; ++ struct async_struct *info; ++ unsigned long port; ++ ++ port = req->port; ++ if (HIGH_BITS_OFFSET) ++ port += (unsigned long) req->port_high << HIGH_BITS_OFFSET; ++ ++ save_flags(flags); cli(); ++ for (i = 0; i < NR_PORTS; i++) { ++ if ((rs_table[i].port == port) && ++ (rs_table[i].iomem_base == req->iomem_base)) ++ break; ++ } ++#ifdef __i386__ ++ if (i == NR_PORTS) { ++ for (i = 4; i < NR_PORTS; i++) ++ if ((rs_table[i].type == PORT_UNKNOWN) && ++ (rs_table[i].count == 0)) ++ break; ++ } ++#endif ++ if (i == NR_PORTS) { ++ for (i = 0; i < NR_PORTS; i++) ++ if ((rs_table[i].type == PORT_UNKNOWN) && ++ (rs_table[i].count == 0)) ++ break; ++ } ++ if (i == NR_PORTS) { ++ restore_flags(flags); ++ return -1; ++ } ++ state = &rs_table[i]; ++ if (rs_table[i].count) { ++ restore_flags(flags); ++ printk("Couldn't configure serial #%d (port=%ld,irq=%d): " ++ "device already open\n", i, port, req->irq); ++ return -1; ++ } ++ state->irq = req->irq; ++ state->port = port; ++ state->flags = req->flags; ++ state->io_type = req->io_type; ++ state->iomem_base = req->iomem_base; ++ state->iomem_reg_shift = req->iomem_reg_shift; ++ if (req->baud_base) ++ state->baud_base = req->baud_base; ++ if ((info = state->info) != NULL) { ++ info->port = port; ++ info->flags = req->flags; ++ info->io_type = req->io_type; ++ info->iomem_base = req->iomem_base; ++ info->iomem_reg_shift = req->iomem_reg_shift; ++ } ++ autoconfig(state); ++ if (state->type == PORT_UNKNOWN) { ++ restore_flags(flags); ++ printk("register_serial(): autoconfig failed\n"); ++ return -1; ++ } ++ restore_flags(flags); ++ ++ if ((state->flags & ASYNC_AUTO_IRQ) && CONFIGURED_SERIAL_PORT(state)) ++ state->irq = detect_uart_irq(state); ++ ++ printk(KERN_INFO "ttyS%02d at %s 0x%04lx (irq = %d) is a %s\n", ++ state->line + SERIAL_DEV_OFFSET, ++ state->iomem_base ? "iomem" : "port", ++ state->iomem_base ? (unsigned long)state->iomem_base : ++ state->port, state->irq, uart_config[state->type].name); ++ tty_register_devfs(&serial_driver, 0, ++ serial_driver.minor_start + state->line); ++ tty_register_devfs(&callout_driver, 0, ++ callout_driver.minor_start + state->line); ++ return state->line + SERIAL_DEV_OFFSET; ++} ++ ++/** ++ * unregister_serial - deconfigure a 16x50 serial port ++ * @line: line to deconfigure ++ * ++ * The port specified is deconfigured and its resources are freed. Any ++ * user of the port is disconnected as if carrier was dropped. Line is ++ * the port number returned by register_serial(). ++ */ ++ ++void unregister_serial(int line) ++{ ++ unsigned long flags; ++ struct serial_state *state = &rs_table[line]; ++ ++ save_flags(flags); cli(); ++ if (state->info && state->info->tty) ++ tty_hangup(state->info->tty); ++ state->type = PORT_UNKNOWN; ++ printk(KERN_INFO "ttyS%02d unloaded\n", state->line); ++ /* These will be hidden, because they are devices that will no longer ++ * be available to the system. (ie, PCMCIA modems, once ejected) ++ */ ++ tty_unregister_devfs(&serial_driver, ++ serial_driver.minor_start + state->line); ++ tty_unregister_devfs(&callout_driver, ++ callout_driver.minor_start + state->line); ++ restore_flags(flags); ++} ++ ++static void __exit rs_fini(void) ++{ ++ unsigned long flags; ++ int e1, e2; ++ int i; ++ struct async_struct *info; ++ ++ /* printk("Unloading %s: version %s\n", serial_name, serial_version); */ ++ del_timer_sync(&serial_timer); ++ save_flags(flags); cli(); ++ remove_bh(SERIAL_BH); ++ if ((e1 = tty_unregister_driver(&serial_driver))) ++ printk("serial: failed to unregister serial driver (%d)\n", ++ e1); ++ if ((e2 = tty_unregister_driver(&callout_driver))) ++ printk("serial: failed to unregister callout driver (%d)\n", ++ e2); ++ restore_flags(flags); ++ ++ for (i = 0; i < NR_PORTS; i++) { ++ if ((info = rs_table[i].info)) { ++ rs_table[i].info = NULL; ++ kfree(info); ++ } ++ if ((rs_table[i].type != PORT_UNKNOWN) && rs_table[i].port) { ++#ifdef CONFIG_SERIAL_RSA ++ if (rs_table[i].type == PORT_RSA) ++ release_region(rs_table[i].port + ++ UART_RSA_BASE, 16); ++ else ++#endif ++ release_region(rs_table[i].port, 8); ++ } ++#if defined(ENABLE_SERIAL_PCI) || defined(ENABLE_SERIAL_PNP) ++ if (rs_table[i].iomem_base) ++ iounmap(rs_table[i].iomem_base); ++#endif ++ } ++#if defined(ENABLE_SERIAL_PCI) || defined(ENABLE_SERIAL_PNP) ++ for (i=0; i < NR_PCI_BOARDS; i++) { ++ struct pci_board_inst *brd = &serial_pci_board[i]; ++ ++ if (serial_pci_board[i].dev == 0) ++ continue; ++ if (brd->board.init_fn) ++ (brd->board.init_fn)(brd->dev, &brd->board, 0); ++ if (DEACTIVATE_FUNC(brd->dev)) ++ (DEACTIVATE_FUNC(brd->dev))(brd->dev); ++ } ++#endif ++ if (tmp_buf) { ++ unsigned long pg = (unsigned long) tmp_buf; ++ tmp_buf = NULL; ++ free_page(pg); ++ } ++ ++#ifdef ENABLE_SERIAL_PCI ++ if (serial_pci_driver.name[0]) ++ pci_unregister_driver (&serial_pci_driver); ++#endif ++} ++ ++module_init(rs_init); ++module_exit(rs_fini); ++MODULE_DESCRIPTION("Standard/generic (dumb) serial driver"); ++MODULE_AUTHOR("Theodore Ts'o "); ++MODULE_LICENSE("GPL"); ++ ++ ++/* ++ * ------------------------------------------------------------ ++ * Serial console driver ++ * ------------------------------------------------------------ ++ */ ++#ifdef CONFIG_SERIAL_CONSOLE ++ ++#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) ++ ++static struct async_struct async_sercons; ++ ++/* ++ * Wait for transmitter & holding register to empty ++ */ ++static inline void wait_for_xmitr(struct async_struct *info) ++{ ++ unsigned int status, tmout = 1000000; ++ ++ do { ++ status = serial_in(info, UART_LSR); ++ ++ if (status & UART_LSR_BI) ++ lsr_break_flag = UART_LSR_BI; ++ ++ if (--tmout == 0) ++ break; ++ } while((status & BOTH_EMPTY) != BOTH_EMPTY); ++ ++ /* Wait for flow control if necessary */ ++ if (info->flags & ASYNC_CONS_FLOW) { ++ tmout = 1000000; ++ while (--tmout && ++ ((serial_in(info, UART_MSR) & UART_MSR_CTS) == 0)); ++ } ++} ++ ++ ++/* ++ * Print a string to the serial port trying not to disturb ++ * any possible real use of the port... ++ * ++ * The console must be locked when we get here. ++ */ ++static void serial_console_write(struct console *co, const char *s, ++ unsigned count) ++{ ++ static struct async_struct *info = &async_sercons; ++ int ier; ++ unsigned i; ++ ++ /* ++ * First save the IER then disable the interrupts ++ */ ++ ier = serial_in(info, UART_IER); ++ serial_out(info, UART_IER, 0x00); ++ ++ /* ++ * Now, do each character ++ */ ++ for (i = 0; i < count; i++, s++) { ++ wait_for_xmitr(info); ++ ++ /* ++ * Send the character out. ++ * If a LF, also do CR... ++ */ ++ serial_out(info, UART_TX, *s); ++ if (*s == 10) { ++ wait_for_xmitr(info); ++ serial_out(info, UART_TX, 13); ++ } ++ } ++ ++ /* ++ * Finally, Wait for transmitter & holding register to empty ++ * and restore the IER ++ */ ++ wait_for_xmitr(info); ++ serial_out(info, UART_IER, ier); ++} ++ ++static kdev_t serial_console_device(struct console *c) ++{ ++ return MKDEV(TTY_MAJOR, 64 + c->index); ++} ++ ++/* ++ * Setup initial baud/bits/parity/flow control. We do two things here: ++ * - construct a cflag setting for the first rs_open() ++ * - initialize the serial port ++ * Return non-zero if we didn't find a serial port. ++ */ ++static int __init serial_console_setup(struct console *co, char *options) ++{ ++ static struct async_struct *info; ++ struct serial_state *state; ++ unsigned cval; ++ int baud = 9600; ++ int bits = 8; ++ int parity = 'n'; ++ int doflow = 0; ++ int cflag = CREAD | HUPCL | CLOCAL; ++ int quot = 0; ++ char *s; ++ ++ if (options) { ++ baud = simple_strtoul(options, NULL, 10); ++ s = options; ++ while(*s >= '0' && *s <= '9') ++ s++; ++ if (*s) parity = *s++; ++ if (*s) bits = *s++ - '0'; ++ if (*s) doflow = (*s++ == 'r'); ++ } ++ ++ /* ++ * Now construct a cflag setting. ++ */ ++ switch(baud) { ++ case 1200: ++ cflag |= B1200; ++ break; ++ case 2400: ++ cflag |= B2400; ++ break; ++ case 4800: ++ cflag |= B4800; ++ break; ++ case 19200: ++ cflag |= B19200; ++ break; ++ case 38400: ++ cflag |= B38400; ++ break; ++ case 57600: ++ cflag |= B57600; ++ break; ++ case 115200: ++ cflag |= B115200; ++ break; ++ case 9600: ++ default: ++ cflag |= B9600; ++ /* ++ * Set this to a sane value to prevent a divide error ++ */ ++ baud = 9600; ++ break; ++ } ++ switch(bits) { ++ case 7: ++ cflag |= CS7; ++ break; ++ default: ++ case 8: ++ cflag |= CS8; ++ break; ++ } ++ switch(parity) { ++ case 'o': case 'O': ++ cflag |= PARODD; ++ break; ++ case 'e': case 'E': ++ cflag |= PARENB; ++ break; ++ } ++ co->cflag = cflag; ++ ++ /* ++ * Divisor, bytesize and parity ++ */ ++ state = rs_table + co->index; ++ if (doflow) ++ state->flags |= ASYNC_CONS_FLOW; ++ info = &async_sercons; ++ info->magic = SERIAL_MAGIC; ++ info->state = state; ++ info->port = state->port; ++ info->flags = state->flags; ++#ifdef CONFIG_HUB6 ++ info->hub6 = state->hub6; ++#endif ++ info->io_type = state->io_type; ++ info->iomem_base = state->iomem_base; ++ info->iomem_reg_shift = state->iomem_reg_shift; ++ quot = state->baud_base / baud; ++ cval = cflag & (CSIZE | CSTOPB); ++#if defined(__powerpc__) || defined(__alpha__) ++ cval >>= 8; ++#else /* !__powerpc__ && !__alpha__ */ ++ cval >>= 4; ++#endif /* !__powerpc__ && !__alpha__ */ ++ if (cflag & PARENB) ++ cval |= UART_LCR_PARITY; ++ if (!(cflag & PARODD)) ++ cval |= UART_LCR_EPAR; ++ ++ /* ++ * Disable UART interrupts, set DTR and RTS high ++ * and set speed. ++ */ ++ serial_out(info, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */ ++ serial_out(info, UART_DLL, quot & 0xff); /* LS of divisor */ ++ serial_out(info, UART_DLM, quot >> 8); /* MS of divisor */ ++ serial_out(info, UART_LCR, cval); /* reset DLAB */ ++ serial_out(info, UART_IER, 0); ++ serial_out(info, UART_MCR, UART_MCR_DTR | UART_MCR_RTS); ++ ++ /* ++ * If we read 0xff from the LSR, there is no UART here. ++ */ ++ if (serial_in(info, UART_LSR) == 0xff) ++ return -1; ++ ++ return 0; ++} ++ ++static struct console sercons = { ++ name: "ttyS", ++ write: serial_console_write, ++ device: serial_console_device, ++ setup: serial_console_setup, ++ flags: CON_PRINTBUFFER, ++ index: -1, ++}; ++ ++/* ++ * Register console. ++ */ ++void __init serial_console_init(void) ++{ ++ register_console(&sercons); ++} ++#endif ++ ++/* ++ Local variables: ++ compile-command: "gcc -D__KERNEL__ -I../../include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -pipe -fno-strength-reduce -march=i586 -DMODULE -DMODVERSIONS -include ../../include/linux/modversions.h -DEXPORT_SYMTAB -c serial.c" ++ End: ++*/ +diff -urN linux.old/drivers/char/ticfg/Makefile linux.dev/drivers/char/ticfg/Makefile +--- linux.old/drivers/char/ticfg/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/drivers/char/ticfg/Makefile 2005-10-21 17:02:20.199991500 +0200 +@@ -0,0 +1,6 @@ ++ ++O_TARGET := ticfg.o ++ ++obj-$(CONFIG_AR7_ADAM2) := adam2_env.o ++ ++include $(TOPDIR)/Rules.make +diff -urN linux.old/drivers/char/ticfg/adam2_env.c linux.dev/drivers/char/ticfg/adam2_env.c +--- linux.old/drivers/char/ticfg/adam2_env.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/drivers/char/ticfg/adam2_env.c 2005-10-21 17:02:20.199991500 +0200 +@@ -0,0 +1,85 @@ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#undef ADAM2_ENV_DEBUG ++ ++#ifdef ADAM2_ENV_DEBUG ++#define DPRINTK(args...) do { printk(args); } while(0); ++#else ++#define DPRINTK(args...) do { } while(0); ++#endif ++ ++#define ADAM2_ENV_DIR "ticfg" ++#define ADAM2_ENV_NAME "env" ++ ++static struct proc_dir_entry *adam2_env_proc_dir; ++static struct proc_dir_entry *adam2_env_proc_ent; ++ ++static int ++adam2_proc_read_env(char *page, char **start, off_t pos, int count, ++ int *eof, void *data) ++{ ++ int len; ++ t_env_var *env; ++ ++ if (pos > 0) ++ return 0; ++ ++ len=0; ++ for (env = prom_iterenv(0); env; env = prom_iterenv(env)) { ++ if (env->val) { ++ /* XXX check for page len */ ++ len += sprintf(page + len, "%s\t%s\n", ++ env->name, env->val); ++ } ++ } ++ ++ *eof=1; ++ return len; ++} ++ ++static int __init ++adam2_env_init(void) ++{ ++ ++ DPRINTK("%s\n", __FUNCTION__); ++ ++ adam2_env_proc_dir = proc_mkdir(ADAM2_ENV_DIR, NULL); ++ if (!adam2_env_proc_dir) { ++ printk(KERN_ERR "%s: Unable to create /proc/%s entry\n", ++ __FUNCTION__, ADAM2_ENV_DIR); ++ return -ENOMEM; ++ } ++ ++ adam2_env_proc_ent = ++ create_proc_entry(ADAM2_ENV_NAME, 0444, adam2_env_proc_dir); ++ if (!adam2_env_proc_ent) { ++ printk(KERN_ERR "%s: Unable to create /proc/%s/%s entry\n", ++ __FUNCTION__, ADAM2_ENV_DIR, ADAM2_ENV_NAME); ++ remove_proc_entry(ADAM2_ENV_DIR, NULL); ++ return -ENOMEM; ++ } ++ adam2_env_proc_ent->read_proc = adam2_proc_read_env; ++ ++ return 0; ++} ++ ++static ++void __exit ++adam2_env_cleanup(void) ++{ ++ remove_proc_entry(ADAM2_ENV_NAME, adam2_env_proc_dir); ++ remove_proc_entry(ADAM2_ENV_DIR, NULL); ++} ++ ++module_init(adam2_env_init); ++module_exit(adam2_env_cleanup); ++ ++MODULE_LICENSE("GPL"); +diff -urN linux.old/include/asm-mips/ar7/adam2_env.h linux.dev/include/asm-mips/ar7/adam2_env.h +--- linux.old/include/asm-mips/ar7/adam2_env.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/include/asm-mips/ar7/adam2_env.h 2005-10-21 17:02:25.564326750 +0200 +@@ -0,0 +1,13 @@ ++#ifndef _INCLUDE_ASM_AR7_ADAM2_ENV_H_ ++#define _INCLUDE_ASM_AR7_ADAM2_ENV_H_ ++ ++/* Environment variable */ ++typedef struct { ++ char *name; ++ char *val; ++} t_env_var; ++ ++char *prom_getenv(char *); ++t_env_var *prom_iterenv(t_env_var *); ++ ++#endif /* _INCLUDE_ASM_AR7_ADAM2_ENV_H_ */ diff -urN linux.old/include/asm-mips/ar7/ar7.h linux.dev/include/asm-mips/ar7/ar7.h --- linux.old/include/asm-mips/ar7/ar7.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/ar7.h 2005-08-12 19:32:05.147223992 +0200 ++++ linux.dev/include/asm-mips/ar7/ar7.h 2005-10-21 16:45:42.178067250 +0200 @@ -0,0 +1,33 @@ +/* + * $Id$ @@ -3743,8 +12679,8 @@ diff -urN linux.old/include/asm-mips/ar7/ar7.h linux.dev/include/asm-mips/ar7/ar +#endif diff -urN linux.old/include/asm-mips/ar7/avalanche_intc.h linux.dev/include/asm-mips/ar7/avalanche_intc.h --- linux.old/include/asm-mips/ar7/avalanche_intc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/avalanche_intc.h 2005-08-12 19:32:05.148223840 +0200 -@@ -0,0 +1,283 @@ ++++ linux.dev/include/asm-mips/ar7/avalanche_intc.h 2005-10-21 17:02:25.568327000 +0200 +@@ -0,0 +1,292 @@ + /* + * Nitin Dhingra, iamnd@ti.com + * Copyright (C) 2000 Texas Instruments Inc. @@ -3773,6 +12709,8 @@ diff -urN linux.old/include/asm-mips/ar7/avalanche_intc.h linux.dev/include/asm- +#ifndef _AVALANCHE_INTC_H +#define _AVALANCHE_INTC_H + ++#include ++ +/* ----- */ + +#define KSEG1_BASE 0xA0000000 @@ -3803,10 +12741,17 @@ diff -urN linux.old/include/asm-mips/ar7/avalanche_intc.h linux.dev/include/asm- +#define AVALANCHE_INT_END_PRIMARY_REG1 (31 + MIPS_EXCEPTION_OFFSET) +#define AVALANCHE_INT_END_PRIMARY_REG2 (39 + MIPS_EXCEPTION_OFFSET) + ++#define AVALANCHE_INTC_END (AVINTNUM(AVALANCHE_INT_END_PRIMARY) + \ ++ AVINTNUM(AVALANCHE_INT_END_SECONDARY) + \ ++ MIPS_EXCEPTION_OFFSET) + -+#define AVALANCHE_INT_END (AVINTNUM(AVALANCHE_INT_END_PRIMARY) + \ -+ AVINTNUM(AVALANCHE_INT_END_SECONDARY) \ -+ + MIPS_EXCEPTION_OFFSET - 1) /* Suraj, check */ ++#if defined(CONFIG_AR7_VLYNQ) ++#define AVALANCHE_INT_END_LOW_VLYNQ (AVALANCHE_INTC_END + 32) ++#define AVALANCHE_INT_END_VLYNQ (AVALANCHE_INTC_END + 32 * CONFIG_AR7_VLYNQ_PORTS) ++#define AVALANCHE_INT_END AVALANCHE_INT_END_VLYNQ ++#else ++#define AVALANCHE_INT_END AVALANCHE_INTC_END ++#endif + + +/* @@ -4030,7 +12975,7 @@ diff -urN linux.old/include/asm-mips/ar7/avalanche_intc.h linux.dev/include/asm- +#endif /* _AVALANCHE_INTC_H */ diff -urN linux.old/include/asm-mips/ar7/avalanche_misc.h linux.dev/include/asm-mips/ar7/avalanche_misc.h --- linux.old/include/asm-mips/ar7/avalanche_misc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/avalanche_misc.h 2005-08-12 19:32:05.148223840 +0200 ++++ linux.dev/include/asm-mips/ar7/avalanche_misc.h 2005-10-21 16:45:42.178067250 +0200 @@ -0,0 +1,174 @@ +#ifndef _AVALANCHE_MISC_H_ +#define _AVALANCHE_MISC_H_ @@ -4208,7 +13153,7 @@ diff -urN linux.old/include/asm-mips/ar7/avalanche_misc.h linux.dev/include/asm- +#endif diff -urN linux.old/include/asm-mips/ar7/avalanche_regs.h linux.dev/include/asm-mips/ar7/avalanche_regs.h --- linux.old/include/asm-mips/ar7/avalanche_regs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/avalanche_regs.h 2005-08-12 19:32:05.149223688 +0200 ++++ linux.dev/include/asm-mips/ar7/avalanche_regs.h 2005-10-21 16:45:42.182067500 +0200 @@ -0,0 +1,567 @@ +/* + * $Id$ @@ -4777,9 +13722,139 @@ diff -urN linux.old/include/asm-mips/ar7/avalanche_regs.h linux.dev/include/asm- + + + +diff -urN linux.old/include/asm-mips/ar7/avalanche_types.h linux.dev/include/asm-mips/ar7/avalanche_types.h +--- linux.old/include/asm-mips/ar7/avalanche_types.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/include/asm-mips/ar7/avalanche_types.h 2005-10-21 17:02:25.568327000 +0200 +@@ -0,0 +1,126 @@ ++/*------------------------------------------------------------------------------------------*\ ++\*------------------------------------------------------------------------------------------*/ ++#ifndef _avalanche_types_h_ ++#define _avalanche_types_h_ ++ ++/*--- #include ---*/ ++#ifndef TRUE ++#define TRUE 1 ++#endif ++#ifndef FALSE ++#define FALSE 0 ++#endif ++#ifndef NULL ++#define NULL (void *)0 ++#endif ++ ++/*------------------------------------------------------------------------------------------*\ ++ * Typen für Texas GPL Module ++\*------------------------------------------------------------------------------------------*/ ++#ifndef __UINT8_T__ ++typedef unsigned char UINT8; ++#define __UINT8_T__ ++#endif ++ ++#ifndef __UCHAR_T__ ++typedef unsigned char UCHAR; ++#define __UCHAR_T__ ++#endif ++ ++#ifndef __INT8_T__ ++typedef signed char INT8; ++#define __INT8_T__ ++#endif ++ ++#ifndef __UINT16_T__ ++typedef unsigned short UINT16; ++#define __UINT16_T__ ++#endif ++ ++#ifndef __USHORT_T__ ++typedef unsigned short USHORT; ++#define __USHORT_T__ ++#endif ++ ++#ifndef __INT16_T__ ++typedef signed short INT16; ++#define __INT16_T__ ++#endif ++ ++#ifndef __UINT32_T__ ++typedef unsigned int UINT32; ++#define __UINT32_T__ ++#endif ++ ++#ifndef __UINT_T__ ++typedef unsigned int UINT; ++#define __UINT_T__ ++#endif ++ ++#ifndef __INT32_T__ ++typedef signed int INT32; ++#define __INT32_T__ ++#endif ++ ++#ifndef __ULONG_T__ ++typedef unsigned long ULONG; ++#define __ULONG_T__ ++#endif ++ ++#ifndef __BOOL_T__ ++typedef int BOOL; ++#define __BOOL_T__ ++#endif ++ ++#ifndef __STATUS_T__ ++typedef int STATUS; ++#define __STATUS_T__ ++#endif ++ ++/*------------------------------------------------------------------------------------------*\ ++\*------------------------------------------------------------------------------------------*/ ++typedef void (*p_vlynq_intr_cntrl_isr_t)(void *,void *,void *); ++typedef INT32 (*p_vlynq_interrupt_vector_set_t)(void *, UINT32, UINT32, INT32, INT32, INT32); ++typedef INT32 (*p_vlynq_interrupt_vector_cntl_t)(void *, UINT32, INT32, UINT32); ++typedef UINT32 (*p_vlynq_interrupt_get_count_t)(void *, UINT32); ++typedef INT32 (*p_vlynq_install_isr_t)(void *, UINT32, p_vlynq_intr_cntrl_isr_t, void *, void *, void *); ++typedef INT32 (*p_vlynq_uninstall_isr_t)(void *, UINT32, void *, void *, void *); ++typedef void (*p_vlynq_root_isr_t)(void *); ++typedef void (*p_vlynq_delay_t)(UINT32); ++typedef INT32 (*p_vlynq_interrupt_vector_map_t)(void *, INT32, UINT32, UINT32); ++typedef INT32 (*p_vlynq_interrupt_set_polarity_t)(void *, INT32, UINT32, INT32); ++typedef INT32 (*p_vlynq_interrupt_get_polarity_t)(void *, INT32, UINT32); ++typedef INT32 (*p_vlynq_interrupt_set_type_t)(void *, INT32, UINT32, INT32); ++typedef INT32 (*p_vlynq_interrupt_get_type_t)(void *, INT32, UINT32); ++typedef INT32 (*p_vlynq_interrupt_enable_t)(void *, INT32, UINT32); ++typedef INT32 (*p_vlynq_interrupt_disable_t)(void *, INT32, UINT32); ++ ++/*------------------------------------------------------------------------------------------*\ ++\*------------------------------------------------------------------------------------------*/ ++extern p_vlynq_interrupt_vector_set_t p_vlynq_interrupt_vector_set; ++extern p_vlynq_interrupt_vector_cntl_t p_vlynq_interrupt_vector_cntl; ++extern p_vlynq_interrupt_get_count_t p_vlynq_interrupt_get_count; ++extern p_vlynq_install_isr_t p_vlynq_install_isr; ++extern p_vlynq_uninstall_isr_t p_vlynq_uninstall_isr; ++extern p_vlynq_root_isr_t p_vlynq_root_isr; ++extern p_vlynq_delay_t p_vlynq_delay; ++extern p_vlynq_interrupt_vector_map_t p_vlynq_interrupt_vector_map; ++extern p_vlynq_interrupt_set_polarity_t p_vlynq_interrupt_set_polarity; ++extern p_vlynq_interrupt_get_polarity_t p_vlynq_interrupt_get_polarity; ++extern p_vlynq_interrupt_set_type_t p_vlynq_interrupt_set_type; ++extern p_vlynq_interrupt_get_type_t p_vlynq_interrupt_get_type; ++extern p_vlynq_interrupt_enable_t p_vlynq_interrupt_enable; ++extern p_vlynq_interrupt_disable_t p_vlynq_interrupt_disable; ++extern void *p_vlynqDevice0; ++extern void *p_vlynqDevice1; ++ ++/*------------------------------------------------------------------------------------------*\ ++\*------------------------------------------------------------------------------------------*/ ++enum _avalanche_need_ { ++ avalanche_need_vlynq, ++ avalanche_need_auto_mdix ++}; ++ ++int avalanche_need(enum _avalanche_need_); ++ ++#endif /*--- #ifndef _avalanche_types_h_ ---*/ diff -urN linux.old/include/asm-mips/ar7/if_port.h linux.dev/include/asm-mips/ar7/if_port.h --- linux.old/include/asm-mips/ar7/if_port.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/if_port.h 2005-08-12 19:32:05.149223688 +0200 ++++ linux.dev/include/asm-mips/ar7/if_port.h 2005-10-21 16:45:42.182067500 +0200 @@ -0,0 +1,26 @@ +/******************************************************************************* + * FILE PURPOSE: Interface port id Header file @@ -4807,90 +13882,9 @@ diff -urN linux.old/include/asm-mips/ar7/if_port.h linux.dev/include/asm-mips/ar + + +#endif /* _IF_PORT_H_ */ -diff -urN linux.old/include/asm-mips/ar7/sangam_boards.h linux.dev/include/asm-mips/ar7/sangam_boards.h ---- linux.old/include/asm-mips/ar7/sangam_boards.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/sangam_boards.h 2005-08-12 19:32:05.150223536 +0200 -@@ -0,0 +1,77 @@ -+#ifndef _SANGAM_BOARDS_H -+#define _SANGAM_BOARDS_H -+ -+// Let us define board specific information here. -+ -+ -+#if defined(CONFIG_AR7DB) -+ -+#define AFECLK_FREQ 35328000 -+#define REFCLK_FREQ 25000000 -+#define OSC3_FREQ 24000000 -+#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 -+#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x55555555 -+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 -+ -+#endif -+ -+ -+#if defined(CONFIG_AR7RD) -+#define AFECLK_FREQ 35328000 -+#define REFCLK_FREQ 25000000 -+#define OSC3_FREQ 24000000 -+#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 -+#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2 -+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 -+#endif -+ -+ -+#if defined(CONFIG_AR7WI) -+#define AFECLK_FREQ 35328000 -+#define REFCLK_FREQ 25000000 -+#define OSC3_FREQ 24000000 -+#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 -+#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2 -+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 -+#endif -+ -+ -+#if defined(CONFIG_AR7V) -+#define AFECLK_FREQ 35328000 -+#define REFCLK_FREQ 25000000 -+#define OSC3_FREQ 24000000 -+#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 -+#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2 -+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 -+#endif -+ -+ -+#if defined(CONFIG_AR7WRD) -+#define AFECLK_FREQ 35328000 -+#define REFCLK_FREQ 25000000 -+#define OSC3_FREQ 24000000 -+#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 -+#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x00010000 -+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 -+#endif -+ -+ -+#if defined(CONFIG_AR7VWI) -+#define AFECLK_FREQ 35328000 -+#define REFCLK_FREQ 25000000 -+#define OSC3_FREQ 24000000 -+#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 -+#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x00010000 -+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 -+#endif -+ -+ -+#if defined CONFIG_SEAD2 -+#define AVALANCHE_LOW_CPMAC_PHY_MASK 0xAAAAAAAA -+#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x55555555 -+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0 -+#include -+#endif -+ -+ -+#endif diff -urN linux.old/include/asm-mips/ar7/sangam.h linux.dev/include/asm-mips/ar7/sangam.h --- linux.old/include/asm-mips/ar7/sangam.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/sangam.h 2005-08-12 19:32:05.150223536 +0200 ++++ linux.dev/include/asm-mips/ar7/sangam.h 2005-10-21 16:45:42.222070000 +0200 @@ -0,0 +1,180 @@ +#ifndef _SANGAM_H_ +#define _SANGAM_H_ @@ -5072,55 +14066,90 @@ diff -urN linux.old/include/asm-mips/ar7/sangam.h linux.dev/include/asm-mips/ar7 +#include "sangam_boards.h" + +#endif /*_SANGAM_H_ */ -diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_err.h linux.dev/include/asm-mips/ar7/tnetd73xx_err.h ---- linux.old/include/asm-mips/ar7/tnetd73xx_err.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/tnetd73xx_err.h 2005-08-12 19:32:05.171220344 +0200 -@@ -0,0 +1,42 @@ -+/****************************************************************************** -+ * FILE PURPOSE: TNETD73xx Error Definations Header File -+ ****************************************************************************** -+ * FILE NAME: tnetd73xx_err.h -+ * -+ * DESCRIPTION: Error definations for TNETD73XX -+ * -+ * REVISION HISTORY: -+ * 27 Nov 02 - PSP TII -+ * -+ * (C) Copyright 2002, Texas Instruments, Inc -+ *******************************************************************************/ +diff -urN linux.old/include/asm-mips/ar7/sangam_boards.h linux.dev/include/asm-mips/ar7/sangam_boards.h +--- linux.old/include/asm-mips/ar7/sangam_boards.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/include/asm-mips/ar7/sangam_boards.h 2005-10-21 16:45:42.182067500 +0200 +@@ -0,0 +1,77 @@ ++#ifndef _SANGAM_BOARDS_H ++#define _SANGAM_BOARDS_H + -+ -+#ifndef __TNETD73XX_ERR_H__ -+#define __TNETD73XX_ERR_H__ ++// Let us define board specific information here. + -+typedef enum TNETD73XX_ERR_t -+{ -+ TNETD73XX_ERR_OK = 0, /* OK or SUCCESS */ -+ TNETD73XX_ERR_ERROR = -1, /* Unspecified/Generic ERROR */ + -+ /* Pointers and args */ -+ TNETD73XX_ERR_INVARG = -2, /* Invaild argument to the call */ -+ TNETD73XX_ERR_NULLPTR = -3, /* NULL pointer */ -+ TNETD73XX_ERR_BADPTR = -4, /* Bad (out of mem) pointer */ ++#if defined(CONFIG_AR7DB) + -+ /* Memory issues */ -+ TNETD73XX_ERR_ALLOC_FAIL = -10, /* allocation failed */ -+ TNETD73XX_ERR_FREE_FAIL = -11, /* free failed */ -+ TNETD73XX_ERR_MEM_CORRUPT = -12, /* corrupted memory */ -+ TNETD73XX_ERR_BUF_LINK = -13, /* buffer linking failed */ ++#define AFECLK_FREQ 35328000 ++#define REFCLK_FREQ 25000000 ++#define OSC3_FREQ 24000000 ++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 ++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x55555555 ++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 + -+ /* Device issues */ -+ TNETD73XX_ERR_DEVICE_TIMEOUT = -20, /* device timeout on read/write */ -+ TNETD73XX_ERR_DEVICE_MALFUNC = -21, /* device malfunction */ ++#endif + -+ TNETD73XX_ERR_INVID = -30 /* Invalid ID */ + -+} TNETD73XX_ERR; ++#if defined(CONFIG_AR7RD) ++#define AFECLK_FREQ 35328000 ++#define REFCLK_FREQ 25000000 ++#define OSC3_FREQ 24000000 ++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 ++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2 ++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 ++#endif + -+#endif /* __TNETD73XX_ERR_H__ */ ++ ++#if defined(CONFIG_AR7WI) ++#define AFECLK_FREQ 35328000 ++#define REFCLK_FREQ 25000000 ++#define OSC3_FREQ 24000000 ++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 ++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2 ++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 ++#endif ++ ++ ++#if defined(CONFIG_AR7V) ++#define AFECLK_FREQ 35328000 ++#define REFCLK_FREQ 25000000 ++#define OSC3_FREQ 24000000 ++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 ++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2 ++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 ++#endif ++ ++ ++#if defined(CONFIG_AR7WRD) ++#define AFECLK_FREQ 35328000 ++#define REFCLK_FREQ 25000000 ++#define OSC3_FREQ 24000000 ++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 ++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x00010000 ++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 ++#endif ++ ++ ++#if defined(CONFIG_AR7VWI) ++#define AFECLK_FREQ 35328000 ++#define REFCLK_FREQ 25000000 ++#define OSC3_FREQ 24000000 ++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000 ++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x00010000 ++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000 ++#endif ++ ++ ++#if defined CONFIG_SEAD2 ++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0xAAAAAAAA ++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x55555555 ++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0 ++#include ++#endif ++ ++ ++#endif diff -urN linux.old/include/asm-mips/ar7/tnetd73xx.h linux.dev/include/asm-mips/ar7/tnetd73xx.h --- linux.old/include/asm-mips/ar7/tnetd73xx.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/tnetd73xx.h 2005-08-12 19:32:05.151223384 +0200 ++++ linux.dev/include/asm-mips/ar7/tnetd73xx.h 2005-10-21 16:45:42.222070000 +0200 @@ -0,0 +1,338 @@ +/****************************************************************************** + * FILE PURPOSE: TNETD73xx Common Header File @@ -5460,9 +14489,55 @@ diff -urN linux.old/include/asm-mips/ar7/tnetd73xx.h linux.dev/include/asm-mips/ + + +#endif /* __TNETD73XX_H_ */ +diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_err.h linux.dev/include/asm-mips/ar7/tnetd73xx_err.h +--- linux.old/include/asm-mips/ar7/tnetd73xx_err.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/include/asm-mips/ar7/tnetd73xx_err.h 2005-10-21 16:45:42.222070000 +0200 +@@ -0,0 +1,42 @@ ++/****************************************************************************** ++ * FILE PURPOSE: TNETD73xx Error Definations Header File ++ ****************************************************************************** ++ * FILE NAME: tnetd73xx_err.h ++ * ++ * DESCRIPTION: Error definations for TNETD73XX ++ * ++ * REVISION HISTORY: ++ * 27 Nov 02 - PSP TII ++ * ++ * (C) Copyright 2002, Texas Instruments, Inc ++ *******************************************************************************/ ++ ++ ++#ifndef __TNETD73XX_ERR_H__ ++#define __TNETD73XX_ERR_H__ ++ ++typedef enum TNETD73XX_ERR_t ++{ ++ TNETD73XX_ERR_OK = 0, /* OK or SUCCESS */ ++ TNETD73XX_ERR_ERROR = -1, /* Unspecified/Generic ERROR */ ++ ++ /* Pointers and args */ ++ TNETD73XX_ERR_INVARG = -2, /* Invaild argument to the call */ ++ TNETD73XX_ERR_NULLPTR = -3, /* NULL pointer */ ++ TNETD73XX_ERR_BADPTR = -4, /* Bad (out of mem) pointer */ ++ ++ /* Memory issues */ ++ TNETD73XX_ERR_ALLOC_FAIL = -10, /* allocation failed */ ++ TNETD73XX_ERR_FREE_FAIL = -11, /* free failed */ ++ TNETD73XX_ERR_MEM_CORRUPT = -12, /* corrupted memory */ ++ TNETD73XX_ERR_BUF_LINK = -13, /* buffer linking failed */ ++ ++ /* Device issues */ ++ TNETD73XX_ERR_DEVICE_TIMEOUT = -20, /* device timeout on read/write */ ++ TNETD73XX_ERR_DEVICE_MALFUNC = -21, /* device malfunction */ ++ ++ TNETD73XX_ERR_INVID = -30 /* Invalid ID */ ++ ++} TNETD73XX_ERR; ++ ++#endif /* __TNETD73XX_ERR_H__ */ diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_misc.h linux.dev/include/asm-mips/ar7/tnetd73xx_misc.h --- linux.old/include/asm-mips/ar7/tnetd73xx_misc.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/tnetd73xx_misc.h 2005-08-12 19:32:05.172220192 +0200 ++++ linux.dev/include/asm-mips/ar7/tnetd73xx_misc.h 2005-10-21 16:45:42.222070000 +0200 @@ -0,0 +1,239 @@ +/****************************************************************************** + * FILE PURPOSE: TNETD73xx Misc modules API Header @@ -5703,9 +14778,1287 @@ diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_misc.h linux.dev/include/asm- +__u32 tnetd73xx_get_revision(void); + +#endif /* __TNETD73XX_MISC_H__ */ +diff -urN linux.old/include/asm-mips/ar7/vlynq.h linux.dev/include/asm-mips/ar7/vlynq.h +--- linux.old/include/asm-mips/ar7/vlynq.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/include/asm-mips/ar7/vlynq.h 2005-10-21 16:45:47.858422250 +0200 +@@ -0,0 +1,610 @@ ++/*************************************************************************** ++**+----------------------------------------------------------------------+** ++**| **** |** ++**| **** |** ++**| ******o*** |** ++**| ********_///_**** |** ++**| ***** /_//_/ **** |** ++**| ** ** (__/ **** |** ++**| ********* |** ++**| **** |** ++**| *** |** ++**| |** ++**| Copyright (c) 2003 Texas Instruments Incorporated |** ++**| ALL RIGHTS RESERVED |** ++**| |** ++**| Permission is hereby granted to licensees of Texas Instruments |** ++**| Incorporated (TI) products to use this computer program for the sole |** ++**| purpose of implementing a licensee product based on TI products. |** ++**| No other rights to reproduce, use, or disseminate this computer |** ++**| program, whether in part or in whole, are granted. |** ++**| |** ++**| TI makes no representation or warranties with respect to the |** ++**| performance of this computer program, and specifically disclaims |** ++**| any responsibility for any damages, special or consequential, |** ++**| connected with the use of this program. |** ++**| |** ++**+----------------------------------------------------------------------+** ++***************************************************************************/ ++ ++/********************************************************************************* ++ * ------------------------------------------------------------------------------ ++ * Module : vlynq_hal.h ++ * Description : ++ * This header file provides the set of functions exported by the ++ * VLYNQ HAL. This file is included from the SOC specific VLYNQ driver wrapper. ++ * ------------------------------------------------------------------------------ ++ *********************************************************************************/ ++ ++#ifndef _VLYNQ_HAL_H_ ++#define _VLYNQ_HAL_H_ ++ ++/* Enable/Disable debug feature */ ++#undef VLYNQ_DEBUG ++ ++#ifdef VLYNQ_DEBUG /* This needs to be OS abstracted - for testing use vxworks/linux calls */ ++#define debugPrint(format,args...) ++#else ++#define debugPrint(format,args...) ++#endif ++ ++ /* number of VLYNQ memory regions supported */ ++#define VLYNQ_MAX_MEMORY_REGIONS 0x04 ++ ++ /* Max.number of external interrupt inputs supported by VLYNQ module */ ++#define VLYNQ_IVR_MAXIVR 0x08 ++ ++#define VLYNQ_CLK_DIV_MAX 0x08 ++#define VLYNQ_CLK_DIV_MIN 0x01 ++ ++ ++/*** the total number of entries allocated for ICB would be ++ * 32(for 32 bits in IntPending register) + VLYNQ_IVR_CHAIN_SLOTS*/ ++#define VLYNQ_IVR_CHAIN_SLOTS 10 ++ ++ ++/* Error defines */ ++#define VLYNQ_SUCCESS 0 ++ ++#define VLYNQ_ERRCODE_BASE 0 /* Chosen by system */ ++#define VLYNQ_INVALID_ARG -(VLYNQ_ERRCODE_BASE+1) ++#define VLYNQ_INVALID_DRV_STATE -(VLYNQ_ERRCODE_BASE+2) ++#define VLYNQ_INT_CONFIG_ERR -(VLYNQ_ERRCODE_BASE+3) ++#define VLYNQ_LINK_DOWN -(VLYNQ_ERRCODE_BASE+4) ++#define VLYNQ_MEMALLOC_FAIL -(VLYNQ_ERRCODE_BASE+5) ++#define VLYNQ_ISR_NON_EXISTENT -(VLYNQ_ERRCODE_BASE+6) ++#define VLYNQ_INTVEC_MAP_NOT_FOUND -(VLYNQ_ERRCODE_BASE+7) ++ ++/* Vlynq Defines and Macros */ ++ ++#define VLYNQ_NUM_INT_BITS 32 /* 32 bit interrupt staus register */ ++ ++/* Base address of module */ ++#define VLYNQ_BASE (pdev->module_base) ++ ++#define VLYNQ_REMOTE_REGS_OFFSET 0x0080 ++ ++#define VLYNQ_REV_OFFSET 0x0000 ++#define VLYNQ_CTRL_OFFSET 0x0004 ++#define VLYNQ_STATUS_OFFSET 0x0008 ++#define VLYNQ_INT_STAT_OFFSET 0x0010 ++#define VLYNQ_INT_PEND_OFFSET 0x0014 ++#define VLYNQ_INT_PTR_OFFSET 0x0018 ++#define VLYNQ_TXMAP_OFFSET 0x001c ++ ++#define VLYNQ_RX0MAP_SIZE_REG_OFFSET 0x0020 ++#define VLYNQ_RX0MAP_OFFSET_REG_OFFSET 0x0024 ++ ++#define VLYNQ_CHIP_VER_OFFSET 0x0040 ++#define VLYNQ_IVR_REGS_OFFSET 0x0060 ++ ++#define VLYNQ_INT_PENDING_REG_PTR 0x14 ++#define VLYNQ_R_INT_PENDING_REG_PTR VLYNQ_REMOTE_REGS_OFFSET + 0x14 ++ ++#define VLYNQ_REV_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_REV_OFFSET)) ++#define VLYNQ_CTRL_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_CTRL_OFFSET)) ++#define VLYNQ_STATUS_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_STATUS_OFFSET)) ++#define VLYNQ_INT_STAT_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_STAT_OFFSET)) ++#define VLYNQ_INT_PEND_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_PEND_OFFSET)) ++#define VLYNQ_INT_PTR_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_PTR_OFFSET)) ++#define VLYNQ_TXMAP_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_TXMAP_OFFSET)) ++ ++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/ ++#define VLYNQ_RXMAP_SIZE_REG(map) \ ++ *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_RX0MAP_SIZE_REG_OFFSET+( (map-1)<<3))) ++ ++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/ ++#define VLYNQ_RXMAP_OFFSET_REG(map) \ ++ *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_RX0MAP_OFFSET_REG_OFFSET+( (map-1)<<3))) ++ ++#define VLYNQ_CHIP_VER_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_CHIP_VER_OFFSET)) ++ ++/* 0 =< ivr <= 31; currently ivr < VLYNQ_IVR_MAXIVR=8) */ ++#define VLYNQ_IVR_OFFSET(ivr) \ ++ (VLYNQ_BASE + VLYNQ_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3) ) ++ ++#define VLYNQ_IVR_03TO00_REG *((volatile unsigned int*) (VLYNQ_IVR_OFFSET(0)) ) ++#define VLYNQ_IVR_07TO04_REG *((volatile unsigned int*) (VLYNQ_IVR_OFFSET(4)) ) ++/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/ ++ ++#define VLYNQ_IVR_INTEN(ivr) (((unsigned int)(0x80)) << ((((unsigned)(ivr)) % 4) * 8)) ++#define VLYNQ_IVR_INTTYPE(ivr) (((unsigned int)(0x40)) << ((((unsigned)(ivr)) % 4) * 8)) ++#define VLYNQ_IVR_INTPOL(ivr) (((unsigned int)(0x20)) << ((((unsigned)(ivr)) % 4) * 8)) ++#define VLYNQ_IVR_INTVEC(ivr) (((unsigned int)(0x1F)) << ((((unsigned)(ivr)) % 4) * 8)) ++#define VLYNQ_IVR_INTALL(ivr) (((unsigned int)(0xFF)) << ((((unsigned)(ivr)) % 4) * 8)) ++ ++ ++ ++/********************************* ++ * Remote VLYNQ register set * ++ *********************************/ ++ ++#define VLYNQ_R_REV_OFFSET 0x0080 ++#define VLYNQ_R_CTRL_OFFSET 0x0084 ++#define VLYNQ_R_STATUS_OFFSET 0x0088 ++#define VLYNQ_R_INT_STAT_OFFSET 0x0090 ++#define VLYNQ_R_INT_PEND_OFFSET 0x0094 ++#define VLYNQ_R_INT_PTR_OFFSET 0x0098 ++#define VLYNQ_R_TXMAP_OFFSET 0x009c ++ ++#define VLYNQ_R_RX0MAP_SIZE_REG_OFFSET 0x00A0 ++#define VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET 0x00A4 ++ ++#define VLYNQ_R_CHIP_VER_OFFSET 0x00C0 ++#define VLYNQ_R_IVR_REGS_OFFSET 0x00E0 ++ ++#define VLYNQ_R_REV_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_REV_OFFSET)) ++#define VLYNQ_R_CTRL_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_CTRL_OFFSET)) ++#define VLYNQ_R_STATUS_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_STATUS_OFFSET)) ++#define VLYNQ_R_INT_STAT_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_STAT_OFFSET)) ++#define VLYNQ_R_INT_PEND_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_PEND_OFFSET)) ++#define VLYNQ_R_INT_PTR_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_PTR_OFFSET)) ++#define VLYNQ_R_TXMAP_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_TXMAP_OFFSET)) ++ ++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/ ++#define VLYNQ_R_RXMAP_SIZE_REG(map) \ ++ *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_SIZE_REG_OFFSET + ((map-1)<<3))) ++ ++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/ ++#define VLYNQ_R_RXMAP_OFFSET_REG(map) \ ++ *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET + ((map-1)<<3))) ++ ++#define VLYNQ_R_CHIP_VER_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_CHIP_VER_OFFSET) ++ ++#define VLYNQ_R_IVR_OFFSET(ivr) \ ++ (VLYNQ_BASE + VLYNQ_R_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3)) ++ ++ ++/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/ ++#define VLYNQ_R_IVR_03TO00_REG *((volatile unsigned int*) (VLYNQ_R_IVR_OFFSET(0)) ) ++#define VLYNQ_R_IVR_07TO04_REG *((volatile unsigned int*) (VLYNQ_R_IVR_OFFSET(4)) ) ++ ++ ++/****End of remote register set definition******/ ++ ++ ++/*** Masks for individual register fields ***/ ++ ++#define VLYNQ_MODULE_ID_MASK 0xffff0000 ++#define VLYNQ_MAJOR_REV_MASK 0x0000ff00 ++#define VLYNQ_MINOR_REV_MASK 0x000000ff ++ ++ ++#define VLYNQ_CTL_ILOOP_MASK 0x00000002 ++#define VLYNQ_CTL_INT2CFG_MASK 0x00000080 ++#define VLYNQ_CTL_INTVEC_MASK 0x00001f00 ++#define VLYNQ_CTL_INTEN_MASK 0x00002000 ++#define VLYNQ_CTL_INTLOCAL_MASK 0x00004000 ++#define VLYNQ_CTL_CLKDIR_MASK 0x00008000 ++#define VLYNQ_CTL_CLKDIV_MASK 0x00070000 ++#define VLYNQ_CTL_MODE_MASK 0x00e00000 ++ ++ ++#define VLYNQ_STS_LINK_MASK 0x00000001 /* Link is active */ ++#define VLYNQ_STS_MPEND_MASK 0x00000002 /* Pending master requests */ ++#define VLYNQ_STS_SPEND_MASK 0x00000004 /* Pending slave requests */ ++#define VLYNQ_STS_NFEMPTY0_MASK 0x00000008 /* Master data FIFO not empty */ ++#define VLYNQ_STS_NFEMPTY1_MASK 0x00000010 /* Master command FIFO not empty */ ++#define VLYNQ_STS_NFEMPTY2_MASK 0x00000020 /* Slave data FIFO not empty */ ++#define VLYNQ_STS_NFEMPTY3_MASK 0x00000040 /* Slave command FIFO not empty */ ++#define VLYNQ_STS_LERROR_MASK 0x00000080 /* Local error, w/c */ ++#define VLYNQ_STS_RERROR_MASK 0x00000100 /* remote error w/c */ ++#define VLYNQ_STS_OFLOW_MASK 0x00000200 ++#define VLYNQ_STS_IFLOW_MASK 0x00000400 ++#define VLYNQ_STS_MODESUP_MASK 0x00E00000 /* Highest mode supported */ ++#define VLYNQ_STS_SWIDTH_MASK 0x07000000 /* Used for reading the width of VLYNQ bus */ ++#define VLYNQ_STS_DEBUG_MASK 0xE0000000 ++ ++#define VLYNQ_CTL_INTVEC_SHIFT 0x08 ++#define VLYNQ_CTL_INTEN_SHIFT 0x0D ++#define VLYNQ_CTL_INT2CFG_SHIFT 0x07 ++#define VLYNQ_CTL_INTLOCAL_SHIFT 0x0E ++ ++#define VLYNQ_CTL_INTFIELDS_CLEAR_MASK 0x7F80 ++ ++#define VLYNQ_CHIPVER_DEVREV_MASK 0xffff0000 ++#define VLYNQ_CHIPVER_DEVID_MASK 0x0000ffff ++ ++#define VLYNQ_IVR_INTEN_MASK 0x80 ++#define VLYNQ_IVR_INTTYPE_MASK 0x40 ++#define VLYNQ_IVR_INTPOL_MASK 0x20 ++ ++ ++/**** Helper macros ****/ ++ ++#define VLYNQ_RESETCB(arg) \ ++ if( pdev->reset_cb != NULL) \ ++ { \ ++ (pdev->reset_cb)(pdev, (arg)); \ ++ } ++ ++#define VLYNQ_STATUS_FLD_WIDTH(sts) (((sts) & VLYNQ_STS_SWIDTH_MASK) >> 24 ) ++#define VLYNQ_CTL_INTVEC(x) (((x) & 31) << 8 ) ++ ++#define VLYNQ_INRANGE(x,hi,lo) (((x) <= (hi)) && ((x) >= (lo))) ++#define VLYNQ_OUTRANGE(x,hi,lo) (((x) > (hi)) || ((x) < (lo))) ++ ++#define VLYNQ_ALIGN4(x) (x)=(x)&(~3) ++ ++ ++/************************************* ++ * Enums * ++ *************************************/ ++ ++/* Initialization options define what operations are ++ * undertaken during vlynq module initialization */ ++typedef enum ++{ ++ /* Init host local memory regions.This allows ++ * local host access remote memory regions */ ++ VLYNQ_INIT_LOCAL_MEM_REGIONS = 0x01, ++ /* Init host remote memory regions.This allows ++ * remote device access local memory regions */ ++ VLYNQ_INIT_REMOTE_MEM_REGIONS =0x02, ++ /* Init local interrupt config*/ ++ VLYNQ_INIT_LOCAL_INTERRUPTS =0x04, ++ /* Init remote interrupt config*/ ++ VLYNQ_INIT_REMOTE_INTERRUPTS =0x08, ++ /* Check link during initialization*/ ++ VLYNQ_INIT_CHECK_LINK =0x10, ++ /* configure clock during init */ ++ VLYNQ_INIT_CONFIG_CLOCK =0x20, ++ /* Clear errors during init */ ++ VLYNQ_INIT_CLEAR_ERRORS =0x40, ++ /* All options */ ++ VLYNQ_INIT_PERFORM_ALL =0x7F ++}VLYNQ_INIT_OPTIONS; ++ ++ ++/* VLYNQ_DEV_TYPE identifies local or remote device */ ++typedef enum ++{ ++ VLYNQ_LOCAL_DVC = 0, /* vlynq local device (SOC's vlynq module) */ ++ VLYNQ_REMOTE_DVC = 1 /* vlynq remote device (remote vlynq module) */ ++}VLYNQ_DEV_TYPE; ++ ++ ++/* VLYNQ_CLK_SOURCE identifies the vlynq module clock source */ ++typedef enum ++{ ++ VLYNQ_CLK_SOURCE_NONE = 0, /* do not initialize clock generator*/ ++ VLYNQ_CLK_SOURCE_LOCAL = 1, /* clock is generated by local machine */ ++ VLYNQ_CLK_SOURCE_REMOTE = 2 /* clock is generated by remote machine */ ++}VLYNQ_CLK_SOURCE; ++ ++ ++/* VLYNQ_DRV_STATE indicates the current driver state */ ++typedef enum ++{ ++ VLYNQ_DRV_STATE_UNINIT = 0, /* driver is uninitialized */ ++ VLYNQ_DRV_STATE_ININIT = 1, /* VLYNQ is being initialized */ ++ VLYNQ_DRV_STATE_RUN = 2, /* VLYNQ is running properly */ ++ VLYNQ_DRV_STATE_HOLD = 3, /* driver stopped temporarily */ ++ VLYNQ_DRV_STATE_ERROR = 4 /* driver stopped on unrecoverable error */ ++}VLYNQ_DRV_STATE; ++ ++ ++/* VLYNQ_BUS_WIDTH identifies the vlynq module bus width */ ++typedef enum ++{ ++ VLYNQ_BUS_WIDTH_3 = 3, ++ VLYNQ_BUS_WIDTH_5 = 5, ++ VLYNQ_BUS_WIDTH_7 = 7, ++ VLYNQ_BUS_WIDTH_9 = 9 ++}VLYNQ_BUS_WIDTH; ++ ++ ++/* VLYNQ_LOCAL_INT_CONFIG indicates whether the local vlynq ++ * interrupts are processed by the host or passed on to the ++ * remote device. ++ */ ++typedef enum ++{ ++ VLYNQ_INT_REMOTE = 0, /* Interrupt packets sent to remote, intlocal=0 */ ++ VLYNQ_INT_LOCAL = 1 /* Interrupts are handled locally, intlocal=1 */ ++}VLYNQ_LOCAL_INT_CONFIG; ++ ++ ++/* VLYNQ_REMOTE_INT_CONFIG indicates whether the remote ++ * interrupts are to be handled by the SOC system ISR ++ * or via the vlynq root ISR ++ */ ++typedef enum ++{ ++ VLYNQ_INT_ROOT_ISR = 0, /* remote ints handled via vlynq root ISR */ ++ VLYNQ_INT_SYSTEM_ISR = 1 /* remote ints handled via system ISR */ ++}VLYNQ_REMOTE_INT_CONFIG; ++ ++ ++/* VLYNQ_INTR_POLARITY - vlynq interrupt polarity setting */ ++typedef enum ++{ ++ VLYNQ_INTR_ACTIVE_HIGH = 0, ++ VLYNQ_INTR_ACTIVE_LOW = 1 ++}VLYNQ_INTR_POLARITY; ++ ++ ++/* VLYNQ_INTR_TYPE - vlynq interrupt type */ ++typedef enum ++{ ++ VLYNQ_INTR_LEVEL = 0, ++ VLYNQ_INTR_PULSED = 1 ++}VLYNQ_INTR_TYPE; ++ ++ ++/* VLYNQ_RESET_MODE - vlynq reset mode */ ++typedef enum ++{ ++ VLYNQ_RESET_ASSERT, /* hold device in reset state */ ++ VLYNQ_RESET_DEASSERT, /* release device from reset state */ ++ VLYNQ_RESET_INITFAIL, /* handle the device in case driver initialization fails */ ++ VLYNQ_RESET_LINKESTABLISH, /* handle the device in case driver established link */ ++ VLYNQ_RESET_INITFAIL2, /* Driver initialization failed but VLYNQ link exist. */ ++ VLYNQ_RESET_INITOK /* Driver initialization finished OK. */ ++}VLYNQ_RESET_MODE; ++ ++ ++ ++/************************************* ++ * Typedefs * ++ *************************************/ ++ ++struct VLYNQ_DEV_t; /*forward declaration*/ ++ ++/*--------Function Pointers defintions -----------*/ ++ ++/* prototype for interrupt handler definition */ ++typedef void (*VLYNQ_INTR_CNTRL_ISR)(void *arg1,void *arg2,void *arg3); ++ ++typedef void ++(*VLYNQ_RESET_REMOTE)(struct VLYNQ_DEV_t *pDev, VLYNQ_RESET_MODE mode); ++ ++typedef void ++(*VLYNQ_REPORT_CB)( struct VLYNQ_DEV_t *pDev, /* This VLYNQ */ ++ VLYNQ_DEV_TYPE aSrcDvc, /* Event Cause -local/remote? */ ++ unsigned int dwStatRegVal); /* Value of the relevant status register */ ++ ++ ++/*-------Structure Definitions------------*/ ++ ++typedef struct VLYNQ_MEMORY_MAP_t ++{ ++ unsigned int Txmap; ++ unsigned int RxOffset[VLYNQ_MAX_MEMORY_REGIONS]; ++ unsigned int RxSize[VLYNQ_MAX_MEMORY_REGIONS]; ++}VLYNQ_MEMORY_MAP; ++ ++ ++/**VLYNQ_INTERRUPT_CNTRL - defines the vlynq module interrupt ++ * settings in vlynq Control register */ ++typedef struct VLYNQ_INTERRUPT_CNTRL_t ++{ ++ /* vlynq interrupts handled by host or remote - maps to ++ * intLocal bit in vlynq control register */ ++ VLYNQ_LOCAL_INT_CONFIG intLocal; ++ ++ /* remote interrupts handled by vlynq isr or host system ++ * interrupt controller - maps to the int2Cfg in vlynq ++ * control register */ ++ VLYNQ_REMOTE_INT_CONFIG intRemote; ++ ++ /* bit in pending/set register used for module interrupts*/ ++ unsigned int map_vector; ++ ++ /* used only if remote interrupts are to be handled by system ISR*/ ++ unsigned int intr_ptr; ++ ++}VLYNQ_INTERRUPT_CNTRL; ++ ++ ++/* VLYNQ_INTR_CNTRL_ICB - defines the Interrupt control block which hold ++ * the interrupt dispatch table. The vlynq_root_isr() indexes into this ++ * table to identify the ISR to be invoked ++ */ ++typedef struct VLYNQ_INTR_CNTRL_ICB_t ++{ ++ VLYNQ_INTR_CNTRL_ISR isr; /* Clear errors during initialization */ ++ void *arg1 ; /* Arg 1 for the ISR */ ++ void *arg2 ; /* Arg 2 for the ISR */ ++ void *arg3 ; /* Arg 3 for the ISR */ ++ unsigned int isrCount; /* number of ISR invocations so far */ ++ struct VLYNQ_INTR_CNTRL_ICB_t *next; ++}VLYNQ_INTR_CNTRL_ICB; ++ ++/* overlay of vlynq register set */ ++typedef struct VLYNQ_REG_SET_t ++{ ++ unsigned int revision; /*offset : 0x00 */ ++ unsigned int control; /* 0x04*/ ++ unsigned int status; /* 0x08*/ ++ unsigned int pad1; /* 0x0c*/ ++ unsigned int intStatus; /*0x10*/ ++ unsigned int intPending; /*0x14*/ ++ unsigned int intPtr; /*0x18*/ ++ unsigned int txMap; /*0x1C*/ ++ unsigned int rxSize1; /*0x20*/ ++ unsigned int rxOffset1; /*0x24*/ ++ unsigned int rxSize2; /*0x28*/ ++ unsigned int rxOffset2; /*0x2C*/ ++ unsigned int rxSize3; /*0x30*/ ++ unsigned int rxOffset3; /*0x34*/ ++ unsigned int rxSize4; /*0x38*/ ++ unsigned int rxOffset4; /*0x3C*/ ++ unsigned int chipVersion; /*0x40*/ ++ unsigned int pad2[8]; ++ unsigned int ivr30; /*0x60*/ ++ unsigned int ivr74; /*0x64*/ ++ unsigned int pad3[7]; ++}VLYNQ_REG_SET; ++ ++ ++typedef struct VLYNQ_DEV_t ++{ ++ /** module index:1,2,3... used for debugging purposes */ ++ unsigned int dev_idx; ++ ++ /*VLYNQ module base address */ ++ unsigned int module_base; ++ ++ /* clock source selection */ ++ VLYNQ_CLK_SOURCE clk_source; ++ ++ /* Clock Divider.Val=1 to 8. VLYNQ_clk = VBUSCLK/clk_div */ ++ unsigned int clk_div; ++ ++ /* State of the VLYNQ driver, set to VLYNQ_DRV_STATE_UNINIT, when initializing */ ++ VLYNQ_DRV_STATE state; ++ ++ /* Valid VLYNQ bus width, filled by driver */ ++ VLYNQ_BUS_WIDTH width; ++ ++ /* local memory mapping */ ++ VLYNQ_MEMORY_MAP local_mem; ++ ++ /* remote memory mapping */ ++ VLYNQ_MEMORY_MAP remote_mem; ++ ++ /* Local module interrupt params */ ++ VLYNQ_INTERRUPT_CNTRL local_irq; ++ ++ /* remote module interrupt params */ ++ VLYNQ_INTERRUPT_CNTRL remote_irq; ++ ++ /*** ICB related fields **/ ++ ++ /* Sizeof of ICB = VLYNQ_NUM_INT_BITS(for 32 bits in IntPending) + ++ * expansion slots for shared interrupts*/ ++ VLYNQ_INTR_CNTRL_ICB pIntrCB[VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS]; ++ VLYNQ_INTR_CNTRL_ICB *freelist; ++ ++ /* table holding mapping between intVector and the bit position the interrupt ++ * is mapped to(mapVector)*/ ++ char vector_map[32]; ++ ++ /* user callback for vlynq events, NULL if unused */ ++ VLYNQ_REPORT_CB report_cb; ++ ++ /* user callback for resetting/realeasing remote device */ ++ VLYNQ_RESET_REMOTE reset_cb; ++ ++ /*** Handles provided for direct access to register set if need be ++ * Must be intialized to point to appropriate address during ++ * vlynq_init */ ++ volatile VLYNQ_REG_SET * local; ++ volatile VLYNQ_REG_SET * remote; ++ ++ unsigned int intCount; /* number of interrupts generated so far */ ++ unsigned int isrCount; /* number of ISR invocations so far */ ++}VLYNQ_DEV; ++ ++ ++typedef struct VLYNQ_ISR_ARGS_t ++{ ++ int irq; ++ void * arg; ++ void * regset; ++}VLYNQ_ISR_ARGS; ++ ++ ++/**************************************** ++ * Function Prototypes * ++ * API exported by generic vlynq driver * ++ ****************************************/ ++/* Initialization function */ ++int vlynq_init( VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options); ++ ++/* Check vlynq link */ ++unsigned int vlynq_link_check( VLYNQ_DEV * pdev); ++ ++/* Set interrupt vector in local or remote device */ ++int vlynq_interrupt_vector_set( VLYNQ_DEV *pdev, ++ unsigned int int_vector, ++ unsigned int map_vector, ++ VLYNQ_DEV_TYPE dev, ++ VLYNQ_INTR_POLARITY pol, ++ VLYNQ_INTR_TYPE type); ++ ++ ++int vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev, ++ unsigned int int_vector, ++ VLYNQ_DEV_TYPE dev, ++ unsigned int enable); ++ ++unsigned int vlynq_interrupt_get_count( VLYNQ_DEV *pdev, ++ unsigned int map_vector); ++ ++int vlynq_install_isr( VLYNQ_DEV *pdev, ++ unsigned int map_vector, ++ VLYNQ_INTR_CNTRL_ISR isr, ++ void *arg1, void *arg2, void *arg3); ++ ++int vlynq_uninstall_isr( VLYNQ_DEV *pdev, ++ unsigned int map_vector, ++ void *arg1, void *arg2, void *arg3); ++ ++ ++void vlynq_root_isr(void *arg); ++ ++void vlynq_delay(unsigned int clktime); ++ ++/* The following functions, provide better granularity in setting ++ * interrupt parameters. (for better support of linux INT Controller) ++ * Note: The interrupt source is identified by "map_vector"- the bit ++ * position in interrupt status register*/ ++ ++int vlynq_interrupt_vector_map(VLYNQ_DEV * pdev, ++ VLYNQ_DEV_TYPE dev, ++ unsigned int int_vector, ++ unsigned int map_vector); ++ ++int vlynq_interrupt_set_polarity(VLYNQ_DEV * pdev, ++ VLYNQ_DEV_TYPE dev, ++ unsigned int map_vector, ++ VLYNQ_INTR_POLARITY pol); ++ ++int vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev , ++ VLYNQ_DEV_TYPE dev_type, ++ unsigned int map_vector); ++ ++int vlynq_interrupt_set_type(VLYNQ_DEV * pdev, ++ VLYNQ_DEV_TYPE dev, ++ unsigned int map_vector, ++ VLYNQ_INTR_TYPE type); ++ ++int vlynq_interrupt_get_type( VLYNQ_DEV *pdev, ++ VLYNQ_DEV_TYPE dev_type, ++ unsigned int map_vector); ++ ++int vlynq_interrupt_enable(VLYNQ_DEV* pdev, ++ VLYNQ_DEV_TYPE dev, ++ unsigned int map_vector); ++ ++int vlynq_interrupt_disable(VLYNQ_DEV * pdev, ++ VLYNQ_DEV_TYPE dev, ++ unsigned int map_vector); ++ ++ ++ ++ ++ ++#endif /* _VLYNQ_HAL_H_ */ +diff -urN linux.old/include/asm-mips/ar7/vlynq_hal.h linux.dev/include/asm-mips/ar7/vlynq_hal.h +--- linux.old/include/asm-mips/ar7/vlynq_hal.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/include/asm-mips/ar7/vlynq_hal.h 2005-10-21 17:02:25.568327000 +0200 +@@ -0,0 +1,606 @@ ++/*************************************************************************** ++**+----------------------------------------------------------------------+** ++**| **** |** ++**| **** |** ++**| ******o*** |** ++**| ********_///_**** |** ++**| ***** /_//_/ **** |** ++**| ** ** (__/ **** |** ++**| ********* |** ++**| **** |** ++**| *** |** ++**| |** ++**| Copyright (c) 2003 Texas Instruments Incorporated |** ++**| ALL RIGHTS RESERVED |** ++**| |** ++**| Permission is hereby granted to licensees of Texas Instruments |** ++**| Incorporated (TI) products to use this computer program for the sole |** ++**| purpose of implementing a licensee product based on TI products. |** ++**| No other rights to reproduce, use, or disseminate this computer |** ++**| program, whether in part or in whole, are granted. |** ++**| |** ++**| TI makes no representation or warranties with respect to the |** ++**| performance of this computer program, and specifically disclaims |** ++**| any responsibility for any damages, special or consequential, |** ++**| connected with the use of this program. |** ++**| |** ++**+----------------------------------------------------------------------+** ++***************************************************************************/ ++ ++/********************************************************************************* ++ * ------------------------------------------------------------------------------ ++ * Module : vlynq_hal.h ++ * Description : ++ * This header file provides the set of functions exported by the ++ * VLYNQ HAL. This file is included from the SOC specific VLYNQ driver wrapper. ++ * ------------------------------------------------------------------------------ ++ *********************************************************************************/ ++ ++#ifndef _VLYNQ_HAL_H_ ++#define _VLYNQ_HAL_H_ ++ ++#include ++#include ++ ++#ifndef PRIVATE ++#define PRIVATE static ++#endif ++ ++#ifndef GLOBAL ++#define GLOBAL ++#endif ++ ++/* Enable/Disable debug feature */ ++#undef VLYNQ_DEBUG ++ ++#ifdef VLYNQ_DEBUG /* This needs to be OS abstracted - for testing use vxworks/linux calls */ ++#define debugPrint(format,args...) ++#else ++#define debugPrint(format,args...) ++#endif ++ ++/* Error defines */ ++#define VLYNQ_SUCCESS 0 ++ ++#define VLYNQ_ERRCODE_BASE 0 /* Chosen by system */ ++#define VLYNQ_INVALID_ARG -(VLYNQ_ERRCODE_BASE+1) ++#define VLYNQ_INVALID_DRV_STATE -(VLYNQ_ERRCODE_BASE+2) ++#define VLYNQ_INT_CONFIG_ERR -(VLYNQ_ERRCODE_BASE+3) ++#define VLYNQ_LINK_DOWN -(VLYNQ_ERRCODE_BASE+4) ++#define VLYNQ_MEMALLOC_FAIL -(VLYNQ_ERRCODE_BASE+5) ++#define VLYNQ_ISR_NON_EXISTENT -(VLYNQ_ERRCODE_BASE+6) ++#define VLYNQ_INTVEC_MAP_NOT_FOUND -(VLYNQ_ERRCODE_BASE+7) ++ ++/* Vlynq Defines and Macros */ ++ ++#define VLYNQ_NUM_INT_BITS 32 /* 32 bit interrupt staus register */ ++ ++/* Base address of module */ ++#define VLYNQ_BASE (pdev->module_base) ++ ++#define VLYNQ_REMOTE_REGS_OFFSET 0x0080 ++ ++#define VLYNQ_REV_OFFSET 0x0000 ++#define VLYNQ_CTRL_OFFSET 0x0004 ++#define VLYNQ_STATUS_OFFSET 0x0008 ++#define VLYNQ_INT_STAT_OFFSET 0x0010 ++#define VLYNQ_INT_PEND_OFFSET 0x0014 ++#define VLYNQ_INT_PTR_OFFSET 0x0018 ++#define VLYNQ_TXMAP_OFFSET 0x001c ++ ++#define VLYNQ_RX0MAP_SIZE_REG_OFFSET 0x0020 ++#define VLYNQ_RX0MAP_OFFSET_REG_OFFSET 0x0024 ++ ++#define VLYNQ_CHIP_VER_OFFSET 0x0040 ++#define VLYNQ_IVR_REGS_OFFSET 0x0060 ++ ++#define VLYNQ_INT_PENDING_REG_PTR 0x14 ++#define VLYNQ_R_INT_PENDING_REG_PTR VLYNQ_REMOTE_REGS_OFFSET + 0x14 ++ ++#define VLYNQ_REV_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_REV_OFFSET)) ++#define VLYNQ_CTRL_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_CTRL_OFFSET)) ++#define VLYNQ_STATUS_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_STATUS_OFFSET)) ++#define VLYNQ_INT_STAT_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_INT_STAT_OFFSET)) ++#define VLYNQ_INT_PEND_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_INT_PEND_OFFSET)) ++#define VLYNQ_INT_PTR_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_INT_PTR_OFFSET)) ++#define VLYNQ_TXMAP_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_TXMAP_OFFSET)) ++ ++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/ ++#define VLYNQ_RXMAP_SIZE_REG(map) \ ++ *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_RX0MAP_SIZE_REG_OFFSET+( (map-1)<<3))) ++ ++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/ ++#define VLYNQ_RXMAP_OFFSET_REG(map) \ ++ *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_RX0MAP_OFFSET_REG_OFFSET+( (map-1)<<3))) ++ ++#define VLYNQ_CHIP_VER_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_CHIP_VER_OFFSET)) ++ ++/* 0 =< ivr <= 31; currently ivr < VLYNQ_IVR_MAXIVR=8) */ ++#define VLYNQ_IVR_OFFSET(ivr) \ ++ (VLYNQ_BASE + VLYNQ_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3) ) ++ ++#define VLYNQ_IVR_03TO00_REG *((volatile UINT32*) (VLYNQ_IVR_OFFSET(0)) ) ++#define VLYNQ_IVR_07TO04_REG *((volatile UINT32*) (VLYNQ_IVR_OFFSET(4)) ) ++/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/ ++ ++#define VLYNQ_IVR_INTEN(ivr) (((UINT32)(0x80)) << ((((unsigned)(ivr)) % 4) * 8)) ++#define VLYNQ_IVR_INTTYPE(ivr) (((UINT32)(0x40)) << ((((unsigned)(ivr)) % 4) * 8)) ++#define VLYNQ_IVR_INTPOL(ivr) (((UINT32)(0x20)) << ((((unsigned)(ivr)) % 4) * 8)) ++#define VLYNQ_IVR_INTVEC(ivr) (((UINT32)(0x1F)) << ((((unsigned)(ivr)) % 4) * 8)) ++#define VLYNQ_IVR_INTALL(ivr) (((UINT32)(0xFF)) << ((((unsigned)(ivr)) % 4) * 8)) ++ ++ ++ ++/********************************* ++ * Remote VLYNQ register set * ++ *********************************/ ++ ++#define VLYNQ_R_REV_OFFSET 0x0080 ++#define VLYNQ_R_CTRL_OFFSET 0x0084 ++#define VLYNQ_R_STATUS_OFFSET 0x0088 ++#define VLYNQ_R_INT_STAT_OFFSET 0x0090 ++#define VLYNQ_R_INT_PEND_OFFSET 0x0094 ++#define VLYNQ_R_INT_PTR_OFFSET 0x0098 ++#define VLYNQ_R_TXMAP_OFFSET 0x009c ++ ++#define VLYNQ_R_RX0MAP_SIZE_REG_OFFSET 0x00A0 ++#define VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET 0x00A4 ++ ++#define VLYNQ_R_CHIP_VER_OFFSET 0x00C0 ++#define VLYNQ_R_IVR_REGS_OFFSET 0x00E0 ++ ++#define VLYNQ_R_REV_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_REV_OFFSET)) ++#define VLYNQ_R_CTRL_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_CTRL_OFFSET)) ++#define VLYNQ_R_STATUS_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_STATUS_OFFSET)) ++#define VLYNQ_R_INT_STAT_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_INT_STAT_OFFSET)) ++#define VLYNQ_R_INT_PEND_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_INT_PEND_OFFSET)) ++#define VLYNQ_R_INT_PTR_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_INT_PTR_OFFSET)) ++#define VLYNQ_R_TXMAP_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_TXMAP_OFFSET)) ++ ++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/ ++#define VLYNQ_R_RXMAP_SIZE_REG(map) \ ++ *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_SIZE_REG_OFFSET + ((map-1)<<3))) ++ ++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/ ++#define VLYNQ_R_RXMAP_OFFSET_REG(map) \ ++ *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET + ((map-1)<<3))) ++ ++#define VLYNQ_R_CHIP_VER_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_CHIP_VER_OFFSET) ++ ++#define VLYNQ_R_IVR_OFFSET(ivr) \ ++ (VLYNQ_BASE + VLYNQ_R_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3)) ++ ++ ++/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/ ++#define VLYNQ_R_IVR_03TO00_REG *((volatile UINT32*) (VLYNQ_R_IVR_OFFSET(0)) ) ++#define VLYNQ_R_IVR_07TO04_REG *((volatile UINT32*) (VLYNQ_R_IVR_OFFSET(4)) ) ++ ++ ++/****End of remote register set definition******/ ++ ++ ++/*** Masks for individual register fields ***/ ++ ++#define VLYNQ_MODULE_ID_MASK 0xffff0000 ++#define VLYNQ_MAJOR_REV_MASK 0x0000ff00 ++#define VLYNQ_MINOR_REV_MASK 0x000000ff ++ ++ ++#define VLYNQ_CTL_ILOOP_MASK 0x00000002 ++#define VLYNQ_CTL_INT2CFG_MASK 0x00000080 ++#define VLYNQ_CTL_INTVEC_MASK 0x00001f00 ++#define VLYNQ_CTL_INTEN_MASK 0x00002000 ++#define VLYNQ_CTL_INTLOCAL_MASK 0x00004000 ++#define VLYNQ_CTL_CLKDIR_MASK 0x00008000 ++#define VLYNQ_CTL_CLKDIV_MASK 0x00070000 ++#define VLYNQ_CTL_MODE_MASK 0x00e00000 ++ ++ ++#define VLYNQ_STS_LINK_MASK 0x00000001 /* Link is active */ ++#define VLYNQ_STS_MPEND_MASK 0x00000002 /* Pending master requests */ ++#define VLYNQ_STS_SPEND_MASK 0x00000004 /* Pending slave requests */ ++#define VLYNQ_STS_NFEMPTY0_MASK 0x00000008 /* Master data FIFO not empty */ ++#define VLYNQ_STS_NFEMPTY1_MASK 0x00000010 /* Master command FIFO not empty */ ++#define VLYNQ_STS_NFEMPTY2_MASK 0x00000020 /* Slave data FIFO not empty */ ++#define VLYNQ_STS_NFEMPTY3_MASK 0x00000040 /* Slave command FIFO not empty */ ++#define VLYNQ_STS_LERROR_MASK 0x00000080 /* Local error, w/c */ ++#define VLYNQ_STS_RERROR_MASK 0x00000100 /* remote error w/c */ ++#define VLYNQ_STS_OFLOW_MASK 0x00000200 ++#define VLYNQ_STS_IFLOW_MASK 0x00000400 ++#define VLYNQ_STS_MODESUP_MASK 0x00E00000 /* Highest mode supported */ ++#define VLYNQ_STS_SWIDTH_MASK 0x07000000 /* Used for reading the width of VLYNQ bus */ ++#define VLYNQ_STS_DEBUG_MASK 0xE0000000 ++ ++#define VLYNQ_CTL_INTVEC_SHIFT 0x08 ++#define VLYNQ_CTL_INTEN_SHIFT 0x0D ++#define VLYNQ_CTL_INT2CFG_SHIFT 0x07 ++#define VLYNQ_CTL_INTLOCAL_SHIFT 0x0E ++ ++#define VLYNQ_CTL_INTFIELDS_CLEAR_MASK 0x7F80 ++ ++#define VLYNQ_CHIPVER_DEVREV_MASK 0xffff0000 ++#define VLYNQ_CHIPVER_DEVID_MASK 0x0000ffff ++ ++#define VLYNQ_IVR_INTEN_MASK 0x80 ++#define VLYNQ_IVR_INTTYPE_MASK 0x40 ++#define VLYNQ_IVR_INTPOL_MASK 0x20 ++ ++ ++/**** Helper macros ****/ ++ ++#define VLYNQ_RESETCB(arg) \ ++ if( pdev->reset_cb != NULL) \ ++ { \ ++ (pdev->reset_cb)(pdev, (arg)); \ ++ } ++ ++#define VLYNQ_STATUS_FLD_WIDTH(sts) (((sts) & VLYNQ_STS_SWIDTH_MASK) >> 24 ) ++#define VLYNQ_CTL_INTVEC(x) (((x) & 31) << 8 ) ++ ++#define VLYNQ_INRANGE(x,hi,lo) (((x) <= (hi)) && ((x) >= (lo))) ++#define VLYNQ_OUTRANGE(x,hi,lo) (((x) > (hi)) || ((x) < (lo))) ++ ++#define VLYNQ_ALIGN4(x) (x)=(x)&(~3) ++ ++ ++/************************************* ++ * Enums * ++ *************************************/ ++ ++/* Initialization options define what operations are ++ * undertaken during vlynq module initialization */ ++typedef enum ++{ ++ /* Init host local memory regions.This allows ++ * local host access remote memory regions */ ++ VLYNQ_INIT_LOCAL_MEM_REGIONS = 0x01, ++ /* Init host remote memory regions.This allows ++ * remote device access local memory regions */ ++ VLYNQ_INIT_REMOTE_MEM_REGIONS =0x02, ++ /* Init local interrupt config*/ ++ VLYNQ_INIT_LOCAL_INTERRUPTS =0x04, ++ /* Init remote interrupt config*/ ++ VLYNQ_INIT_REMOTE_INTERRUPTS =0x08, ++ /* Check link during initialization*/ ++ VLYNQ_INIT_CHECK_LINK =0x10, ++ /* configure clock during init */ ++ VLYNQ_INIT_CONFIG_CLOCK =0x20, ++ /* Clear errors during init */ ++ VLYNQ_INIT_CLEAR_ERRORS =0x40, ++ /* All options */ ++ VLYNQ_INIT_PERFORM_ALL =0x7F ++}VLYNQ_INIT_OPTIONS; ++ ++ ++/* VLYNQ_DEV_TYPE identifies local or remote device */ ++typedef enum ++{ ++ VLYNQ_LOCAL_DVC = 0, /* vlynq local device (SOC's vlynq module) */ ++ VLYNQ_REMOTE_DVC = 1 /* vlynq remote device (remote vlynq module) */ ++}VLYNQ_DEV_TYPE; ++ ++ ++/* VLYNQ_CLK_SOURCE identifies the vlynq module clock source */ ++typedef enum ++{ ++ VLYNQ_CLK_SOURCE_NONE = 0, /* do not initialize clock generator*/ ++ VLYNQ_CLK_SOURCE_LOCAL = 1, /* clock is generated by local machine */ ++ VLYNQ_CLK_SOURCE_REMOTE = 2 /* clock is generated by remote machine */ ++}VLYNQ_CLK_SOURCE; ++ ++ ++/* VLYNQ_DRV_STATE indicates the current driver state */ ++typedef enum ++{ ++ VLYNQ_DRV_STATE_UNINIT = 0, /* driver is uninitialized */ ++ VLYNQ_DRV_STATE_ININIT = 1, /* VLYNQ is being initialized */ ++ VLYNQ_DRV_STATE_RUN = 2, /* VLYNQ is running properly */ ++ VLYNQ_DRV_STATE_HOLD = 3, /* driver stopped temporarily */ ++ VLYNQ_DRV_STATE_ERROR = 4 /* driver stopped on unrecoverable error */ ++}VLYNQ_DRV_STATE; ++ ++ ++/* VLYNQ_BUS_WIDTH identifies the vlynq module bus width */ ++typedef enum ++{ ++ VLYNQ_BUS_WIDTH_3 = 3, ++ VLYNQ_BUS_WIDTH_5 = 5, ++ VLYNQ_BUS_WIDTH_7 = 7, ++ VLYNQ_BUS_WIDTH_9 = 9 ++}VLYNQ_BUS_WIDTH; ++ ++ ++/* VLYNQ_LOCAL_INT_CONFIG indicates whether the local vlynq ++ * interrupts are processed by the host or passed on to the ++ * remote device. ++ */ ++typedef enum ++{ ++ VLYNQ_INT_REMOTE = 0, /* Interrupt packets sent to remote, intlocal=0 */ ++ VLYNQ_INT_LOCAL = 1 /* Interrupts are handled locally, intlocal=1 */ ++}VLYNQ_LOCAL_INT_CONFIG; ++ ++ ++/* VLYNQ_REMOTE_INT_CONFIG indicates whether the remote ++ * interrupts are to be handled by the SOC system ISR ++ * or via the vlynq root ISR ++ */ ++typedef enum ++{ ++ VLYNQ_INT_ROOT_ISR = 0, /* remote ints handled via vlynq root ISR */ ++ VLYNQ_INT_SYSTEM_ISR = 1 /* remote ints handled via system ISR */ ++}VLYNQ_REMOTE_INT_CONFIG; ++ ++ ++/* VLYNQ_INTR_POLARITY - vlynq interrupt polarity setting */ ++typedef enum ++{ ++ VLYNQ_INTR_ACTIVE_HIGH = 0, ++ VLYNQ_INTR_ACTIVE_LOW = 1 ++}VLYNQ_INTR_POLARITY; ++ ++ ++/* VLYNQ_INTR_TYPE - vlynq interrupt type */ ++typedef enum ++{ ++ VLYNQ_INTR_LEVEL = 0, ++ VLYNQ_INTR_PULSED = 1 ++}VLYNQ_INTR_TYPE; ++ ++ ++/* VLYNQ_RESET_MODE - vlynq reset mode */ ++typedef enum ++{ ++ VLYNQ_RESET_ASSERT, /* hold device in reset state */ ++ VLYNQ_RESET_DEASSERT, /* release device from reset state */ ++ VLYNQ_RESET_INITFAIL, /* handle the device in case driver initialization fails */ ++ VLYNQ_RESET_LINKESTABLISH, /* handle the device in case driver established link */ ++ VLYNQ_RESET_INITFAIL2, /* Driver initialization failed but VLYNQ link exist. */ ++ VLYNQ_RESET_INITOK /* Driver initialization finished OK. */ ++}VLYNQ_RESET_MODE; ++ ++ ++ ++/************************************* ++ * Typedefs * ++ *************************************/ ++ ++struct VLYNQ_DEV_t; /*forward declaration*/ ++ ++/*--------Function Pointers defintions -----------*/ ++ ++/* prototype for interrupt handler definition */ ++typedef void (*VLYNQ_INTR_CNTRL_ISR)(void *arg1,void *arg2,void *arg3); ++ ++typedef void ++(*VLYNQ_RESET_REMOTE)(struct VLYNQ_DEV_t *pDev, VLYNQ_RESET_MODE mode); ++ ++typedef void ++(*VLYNQ_REPORT_CB)( struct VLYNQ_DEV_t *pDev, /* This VLYNQ */ ++ VLYNQ_DEV_TYPE aSrcDvc, /* Event Cause -local/remote? */ ++ UINT32 dwStatRegVal); /* Value of the relevant status register */ ++ ++ ++/*-------Structure Definitions------------*/ ++ ++typedef struct VLYNQ_MEMORY_MAP_t ++{ ++ UINT32 Txmap; ++ UINT32 RxOffset[VLYNQ_MAX_MEMORY_REGIONS]; ++ UINT32 RxSize[VLYNQ_MAX_MEMORY_REGIONS]; ++}VLYNQ_MEMORY_MAP; ++ ++ ++/**VLYNQ_INTERRUPT_CNTRL - defines the vlynq module interrupt ++ * settings in vlynq Control register */ ++typedef struct VLYNQ_INTERRUPT_CNTRL_t ++{ ++ /* vlynq interrupts handled by host or remote - maps to ++ * intLocal bit in vlynq control register */ ++ VLYNQ_LOCAL_INT_CONFIG intLocal; ++ ++ /* remote interrupts handled by vlynq isr or host system ++ * interrupt controller - maps to the int2Cfg in vlynq ++ * control register */ ++ VLYNQ_REMOTE_INT_CONFIG intRemote; ++ ++ /* bit in pending/set register used for module interrupts*/ ++ UINT32 map_vector; ++ ++ /* used only if remote interrupts are to be handled by system ISR*/ ++ UINT32 intr_ptr; ++ ++}VLYNQ_INTERRUPT_CNTRL; ++ ++ ++/* VLYNQ_INTR_CNTRL_ICB - defines the Interrupt control block which hold ++ * the interrupt dispatch table. The vlynq_root_isr() indexes into this ++ * table to identify the ISR to be invoked ++ */ ++typedef struct VLYNQ_INTR_CNTRL_ICB_t ++{ ++ VLYNQ_INTR_CNTRL_ISR isr; /* Clear errors during initialization */ ++ void *arg1 ; /* Arg 1 for the ISR */ ++ void *arg2 ; /* Arg 2 for the ISR */ ++ void *arg3 ; /* Arg 3 for the ISR */ ++ UINT32 isrCount; /* number of ISR invocations so far */ ++ struct VLYNQ_INTR_CNTRL_ICB_t *next; ++}VLYNQ_INTR_CNTRL_ICB; ++ ++/* overlay of vlynq register set */ ++typedef struct VLYNQ_REG_SET_t ++{ ++ UINT32 revision; /*offset : 0x00 */ ++ UINT32 control; /* 0x04*/ ++ UINT32 status; /* 0x08*/ ++ UINT32 pad1; /* 0x0c*/ ++ UINT32 intStatus; /*0x10*/ ++ UINT32 intPending; /*0x14*/ ++ UINT32 intPtr; /*0x18*/ ++ UINT32 txMap; /*0x1C*/ ++ UINT32 rxSize1; /*0x20*/ ++ UINT32 rxOffset1; /*0x24*/ ++ UINT32 rxSize2; /*0x28*/ ++ UINT32 rxOffset2; /*0x2C*/ ++ UINT32 rxSize3; /*0x30*/ ++ UINT32 rxOffset3; /*0x34*/ ++ UINT32 rxSize4; /*0x38*/ ++ UINT32 rxOffset4; /*0x3C*/ ++ UINT32 chipVersion; /*0x40*/ ++ UINT32 pad2[8]; ++ UINT32 ivr30; /*0x60*/ ++ UINT32 ivr74; /*0x64*/ ++ UINT32 pad3[7]; ++}VLYNQ_REG_SET; ++ ++ ++typedef struct VLYNQ_DEV_t ++{ ++ /** module index:1,2,3... used for debugging purposes */ ++ UINT32 dev_idx; ++ ++ /*VLYNQ module base address */ ++ UINT32 module_base; ++ ++ /* clock source selection */ ++ VLYNQ_CLK_SOURCE clk_source; ++ ++ /* Clock Divider.Val=1 to 8. VLYNQ_clk = VBUSCLK/clk_div */ ++ UINT32 clk_div; ++ ++ /* State of the VLYNQ driver, set to VLYNQ_DRV_STATE_UNINIT, when initializing */ ++ VLYNQ_DRV_STATE state; ++ ++ /* Valid VLYNQ bus width, filled by driver */ ++ VLYNQ_BUS_WIDTH width; ++ ++ /* local memory mapping */ ++ VLYNQ_MEMORY_MAP local_mem; ++ ++ /* remote memory mapping */ ++ VLYNQ_MEMORY_MAP remote_mem; ++ ++ /* Local module interrupt params */ ++ VLYNQ_INTERRUPT_CNTRL local_irq; ++ ++ /* remote module interrupt params */ ++ VLYNQ_INTERRUPT_CNTRL remote_irq; ++ ++ /*** ICB related fields **/ ++ ++ /* Sizeof of ICB = VLYNQ_NUM_INT_BITS(for 32 bits in IntPending) + ++ * expansion slots for shared interrupts*/ ++ VLYNQ_INTR_CNTRL_ICB pIntrCB[VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS]; ++ VLYNQ_INTR_CNTRL_ICB *freelist; ++ ++ /* table holding mapping between intVector and the bit position the interrupt ++ * is mapped to(mapVector)*/ ++ INT8 vector_map[32]; ++ ++ /* user callback for vlynq events, NULL if unused */ ++ VLYNQ_REPORT_CB report_cb; ++ ++ /* user callback for resetting/realeasing remote device */ ++ VLYNQ_RESET_REMOTE reset_cb; ++ ++ /*** Handles provided for direct access to register set if need be ++ * Must be intialized to point to appropriate address during ++ * vlynq_init */ ++ volatile VLYNQ_REG_SET * local; ++ volatile VLYNQ_REG_SET * remote; ++ ++ UINT32 intCount; /* number of interrupts generated so far */ ++ UINT32 isrCount; /* number of ISR invocations so far */ ++}VLYNQ_DEV; ++ ++ ++typedef struct VLYNQ_ISR_ARGS_t ++{ ++ int irq; ++ void * arg; ++ void * regset; ++}VLYNQ_ISR_ARGS; ++ ++ ++/**************************************** ++ * Function Prototypes * ++ * API exported by generic vlynq driver * ++ ****************************************/ ++/* Initialization function */ ++GLOBAL INT32 vlynq_init( VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options); ++ ++/* Check vlynq link */ ++GLOBAL UINT32 vlynq_link_check( VLYNQ_DEV * pdev); ++ ++/* Set interrupt vector in local or remote device */ ++GLOBAL INT32 vlynq_interrupt_vector_set( VLYNQ_DEV *pdev, ++ UINT32 int_vector, ++ UINT32 map_vector, ++ VLYNQ_DEV_TYPE dev, ++ VLYNQ_INTR_POLARITY pol, ++ VLYNQ_INTR_TYPE type); ++ ++ ++GLOBAL INT32 vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev, ++ UINT32 int_vector, ++ VLYNQ_DEV_TYPE dev, ++ UINT32 enable); ++ ++GLOBAL UINT32 vlynq_interrupt_get_count( VLYNQ_DEV *pdev, ++ UINT32 map_vector); ++ ++GLOBAL INT32 vlynq_install_isr( VLYNQ_DEV *pdev, ++ UINT32 map_vector, ++ VLYNQ_INTR_CNTRL_ISR isr, ++ void *arg1, void *arg2, void *arg3); ++ ++GLOBAL INT32 vlynq_uninstall_isr( VLYNQ_DEV *pdev, ++ UINT32 map_vector, ++ void *arg1, void *arg2, void *arg3); ++ ++ ++GLOBAL void vlynq_root_isr(void *arg); ++ ++GLOBAL void vlynq_delay(UINT32 clktime); ++ ++/* The following functions, provide better granularity in setting ++ * interrupt parameters. (for better support of linux INT Controller) ++ * Note: The interrupt source is identified by "map_vector"- the bit ++ * position in interrupt status register*/ ++ ++GLOBAL INT32 vlynq_interrupt_vector_map(VLYNQ_DEV * pdev, ++ VLYNQ_DEV_TYPE dev, ++ UINT32 int_vector, ++ UINT32 map_vector); ++ ++GLOBAL INT32 vlynq_interrupt_set_polarity(VLYNQ_DEV * pdev, ++ VLYNQ_DEV_TYPE dev, ++ UINT32 map_vector, ++ VLYNQ_INTR_POLARITY pol); ++ ++GLOBAL INT32 vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev , ++ VLYNQ_DEV_TYPE dev_type, ++ UINT32 map_vector); ++ ++GLOBAL INT32 vlynq_interrupt_set_type(VLYNQ_DEV * pdev, ++ VLYNQ_DEV_TYPE dev, ++ UINT32 map_vector, ++ VLYNQ_INTR_TYPE type); ++ ++GLOBAL INT32 vlynq_interrupt_get_type( VLYNQ_DEV *pdev, ++ VLYNQ_DEV_TYPE dev_type, ++ UINT32 map_vector); ++ ++GLOBAL INT32 vlynq_interrupt_enable(VLYNQ_DEV* pdev, ++ VLYNQ_DEV_TYPE dev, ++ UINT32 map_vector); ++ ++GLOBAL INT32 vlynq_interrupt_disable(VLYNQ_DEV * pdev, ++ VLYNQ_DEV_TYPE dev, ++ UINT32 map_vector); ++ ++ ++ ++ ++ ++#endif /* _VLYNQ_HAL_H_ */ +diff -urN linux.old/include/asm-mips/ar7/vlynq_hal_params.h linux.dev/include/asm-mips/ar7/vlynq_hal_params.h +--- linux.old/include/asm-mips/ar7/vlynq_hal_params.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/include/asm-mips/ar7/vlynq_hal_params.h 2005-10-21 17:02:25.568327000 +0200 +@@ -0,0 +1,50 @@ ++/*************************************************************************** ++**+----------------------------------------------------------------------+** ++**| **** |** ++**| **** |** ++**| ******o*** |** ++**| ********_///_**** |** ++**| ***** /_//_/ **** |** ++**| ** ** (__/ **** |** ++**| ********* |** ++**| **** |** ++**| *** |** ++**| |** ++**| Copyright (c) 2003 Texas Instruments Incorporated |** ++**| ALL RIGHTS RESERVED |** ++**| |** ++**| Permission is hereby granted to licensees of Texas Instruments |** ++**| Incorporated (TI) products to use this computer program for the sole |** ++**| purpose of implementing a licensee product based on TI products. |** ++**| No other rights to reproduce, use, or disseminate this computer |** ++**| program, whether in part or in whole, are granted. |** ++**| |** ++**| TI makes no representation or warranties with respect to the |** ++**| performance of this computer program, and specifically disclaims |** ++**| any responsibility for any damages, special or consequential, |** ++**| connected with the use of this program. |** ++**| |** ++**+----------------------------------------------------------------------+** ++***************************************************************************/ ++ ++/* This file defines Vlynq module parameters*/ ++ ++#ifndef _VLYNQ_HAL_PARAMS_H ++#define _VLYNQ_HAL_PARAMS_H ++ ++ /* number of VLYNQ memory regions supported */ ++#define VLYNQ_MAX_MEMORY_REGIONS 0x04 ++ ++ /* Max.number of external interrupt inputs supported by VLYNQ module */ ++#define VLYNQ_IVR_MAXIVR 0x08 ++ ++#define VLYNQ_CLK_DIV_MAX 0x08 ++#define VLYNQ_CLK_DIV_MIN 0x01 ++ ++ ++/*** the total number of entries allocated for ICB would be ++ * 32(for 32 bits in IntPending register) + VLYNQ_IVR_CHAIN_SLOTS*/ ++#define VLYNQ_IVR_CHAIN_SLOTS 10 ++ ++ ++#endif /* _VLYNQ_HAL_PARAMS_H */ diff -urN linux.old/include/asm-mips/io.h linux.dev/include/asm-mips/io.h ---- linux.old/include/asm-mips/io.h 2005-07-10 03:00:44.000000000 +0200 -+++ linux.dev/include/asm-mips/io.h 2005-08-12 21:13:28.133469520 +0200 +--- linux.old/include/asm-mips/io.h 2003-08-25 13:44:43.000000000 +0200 ++++ linux.dev/include/asm-mips/io.h 2005-10-21 16:45:42.250071750 +0200 @@ -63,8 +63,12 @@ #ifdef CONFIG_64BIT_PHYS_ADDR #define page_to_phys(page) ((u64)(page - mem_map) << PAGE_SHIFT) @@ -5720,8 +16073,8 @@ diff -urN linux.old/include/asm-mips/io.h linux.dev/include/asm-mips/io.h #define IO_SPACE_LIMIT 0xffff diff -urN linux.old/include/asm-mips/irq.h linux.dev/include/asm-mips/irq.h ---- linux.old/include/asm-mips/irq.h 2005-07-10 03:00:44.000000000 +0200 -+++ linux.dev/include/asm-mips/irq.h 2005-08-12 19:32:05.172220192 +0200 +--- linux.old/include/asm-mips/irq.h 2003-08-25 13:44:43.000000000 +0200 ++++ linux.dev/include/asm-mips/irq.h 2005-10-21 16:45:42.278073500 +0200 @@ -14,7 +14,12 @@ #include #include @@ -5736,8 +16089,8 @@ diff -urN linux.old/include/asm-mips/irq.h linux.dev/include/asm-mips/irq.h #ifdef CONFIG_I8259 static inline int irq_cannonicalize(int irq) diff -urN linux.old/include/asm-mips/page.h linux.dev/include/asm-mips/page.h ---- linux.old/include/asm-mips/page.h 2005-07-10 03:00:44.000000000 +0200 -+++ linux.dev/include/asm-mips/page.h 2005-08-12 21:13:38.481896320 +0200 +--- linux.old/include/asm-mips/page.h 2004-02-18 14:36:32.000000000 +0100 ++++ linux.dev/include/asm-mips/page.h 2005-10-21 16:45:42.282073750 +0200 @@ -129,7 +129,11 @@ #define __pa(x) ((unsigned long) (x) - PAGE_OFFSET) @@ -5751,8 +16104,8 @@ diff -urN linux.old/include/asm-mips/page.h linux.dev/include/asm-mips/page.h #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ diff -urN linux.old/include/asm-mips/pgtable-32.h linux.dev/include/asm-mips/pgtable-32.h ---- linux.old/include/asm-mips/pgtable-32.h 2005-07-10 03:00:44.000000000 +0200 -+++ linux.dev/include/asm-mips/pgtable-32.h 2005-08-12 21:13:46.898616784 +0200 +--- linux.old/include/asm-mips/pgtable-32.h 2004-02-18 14:36:32.000000000 +0100 ++++ linux.dev/include/asm-mips/pgtable-32.h 2005-10-21 16:45:42.286074000 +0200 @@ -108,7 +108,18 @@ * and a page entry and page directory to the page they refer to. */ @@ -5794,8 +16147,8 @@ diff -urN linux.old/include/asm-mips/pgtable-32.h linux.dev/include/asm-mips/pgt #define __mk_pte(page_nr,pgprot) __pte(((page_nr) << (PAGE_SHIFT+2)) | pgprot_val(pgprot)) #else diff -urN linux.old/include/asm-mips/serial.h linux.dev/include/asm-mips/serial.h ---- linux.old/include/asm-mips/serial.h 2005-07-10 03:00:44.000000000 +0200 -+++ linux.dev/include/asm-mips/serial.h 2005-08-12 19:32:05.174219888 +0200 +--- linux.old/include/asm-mips/serial.h 2005-01-19 15:10:12.000000000 +0100 ++++ linux.dev/include/asm-mips/serial.h 2005-10-21 16:45:42.294074500 +0200 @@ -65,6 +65,15 @@ #define C_P(card,port) (((card)<<6|(port)<<3) + 1) @@ -5820,15 +16173,3 @@ diff -urN linux.old/include/asm-mips/serial.h linux.dev/include/asm-mips/serial. ATLAS_SERIAL_PORT_DEFNS \ AU1000_SERIAL_PORT_DEFNS \ COBALT_SERIAL_PORT_DEFNS \ -diff -urN linux.old/Makefile linux.dev/Makefile ---- linux.old/Makefile 2005-07-10 03:00:44.000000000 +0200 -+++ linux.dev/Makefile 2005-08-12 19:32:05.122227792 +0200 -@@ -91,7 +91,7 @@ - - CPPFLAGS := -D__KERNEL__ -I$(HPATH) - --CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -O2 \ -+CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ - -fno-strict-aliasing -fno-common - ifndef CONFIG_FRAME_POINTER - CFLAGS += -fomit-frame-pointer diff --git a/openwrt/target/linux/linux-2.4/patches/ar7/002-led_driver.patch b/openwrt/target/linux/linux-2.4/patches/ar7/002-led_driver.patch index 1982ac3096..81fe153cc3 100644 --- a/openwrt/target/linux/linux-2.4/patches/ar7/002-led_driver.patch +++ b/openwrt/target/linux/linux-2.4/patches/ar7/002-led_driver.patch @@ -1,6 +1,63 @@ -diff -urN linux.old/drivers/char/avalanche_led/gpio.c linux.dev/drivers/char/avalanche_led/gpio.c ---- linux.old/drivers/char/avalanche_led/gpio.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/char/avalanche_led/gpio.c 2005-07-22 06:52:42.973338640 +0200 +diff -urN linux.dev/drivers/char/Config.in linux.dev2/drivers/char/Config.in +--- linux.dev/drivers/char/Config.in 2005-10-21 17:02:20.199991500 +0200 ++++ linux.dev2/drivers/char/Config.in 2005-10-21 18:03:44.541778750 +0200 +@@ -133,6 +133,10 @@ + fi + fi + fi ++if [ "$CONFIG_AR7" = "y" ]; then ++ bool 'Enable LED support' CONFIG_AR7_LED ++fi ++ + if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_ZORRO" = "y" ]; then + tristate 'Commodore A2232 serial support (EXPERIMENTAL)' CONFIG_A2232 + fi +diff -urN linux.dev/drivers/char/Makefile linux.dev2/drivers/char/Makefile +--- linux.dev/drivers/char/Makefile 2005-10-21 17:02:20.199991500 +0200 ++++ linux.dev2/drivers/char/Makefile 2005-10-21 18:03:44.541778750 +0200 +@@ -190,6 +190,12 @@ + obj-$(CONFIG_PCI) += keyboard.o $(KEYMAP) + endif + ++# ++# Texas Intruments LED driver ++# ++obj-$(CONFIG_AR7_LED) += avalanche_led/avalanche_led.o ++subdir-$(CONFIG_AR7_LED) += avalanche_led ++ + obj-$(CONFIG_HIL) += hp_keyb.o + obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o + obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o +diff -urN linux.dev/drivers/char/avalanche_led/Makefile linux.dev2/drivers/char/avalanche_led/Makefile +--- linux.dev/drivers/char/avalanche_led/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev2/drivers/char/avalanche_led/Makefile 2005-10-21 18:03:44.513777000 +0200 +@@ -0,0 +1,23 @@ ++# File: drivers/char/avalanche_led/Makefile ++# ++# Makefile for the Linux LED device driver. ++# ++ ++ ++O_TARGET := avalanche_led.o ++obj-m := avalanche_led.o ++list-multi := avalanche_led.o ++ ++EXTRA_CFLAGS := -I$(TOPDIR)/include/asm/ar7 ++ ++export-objs := ledmod.o leds.o ++ ++avalanche_led-objs := ledmod.o gpio.o uartled.o leds.o ++ ++include $(TOPDIR)/Rules.make ++ ++avalanche_led.o: $(avalanche_led-objs) ++ $(LD) -r -o $@ $(avalanche_led-objs) ++ ++clean: ++ rm -f core *.o *.a *.s +diff -urN linux.dev/drivers/char/avalanche_led/gpio.c linux.dev2/drivers/char/avalanche_led/gpio.c +--- linux.dev/drivers/char/avalanche_led/gpio.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev2/drivers/char/avalanche_led/gpio.c 2005-10-21 18:03:44.513777000 +0200 @@ -0,0 +1,382 @@ +#include +#include @@ -384,9 +441,9 @@ diff -urN linux.old/drivers/char/avalanche_led/gpio.c linux.dev/drivers/char/ava + + + -diff -urN linux.old/drivers/char/avalanche_led/ledmod.c linux.dev/drivers/char/avalanche_led/ledmod.c ---- linux.old/drivers/char/avalanche_led/ledmod.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/char/avalanche_led/ledmod.c 2005-07-22 06:52:42.975338336 +0200 +diff -urN linux.dev/drivers/char/avalanche_led/ledmod.c linux.dev2/drivers/char/avalanche_led/ledmod.c +--- linux.dev/drivers/char/avalanche_led/ledmod.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev2/drivers/char/avalanche_led/ledmod.c 2005-10-21 18:03:44.513777000 +0200 @@ -0,0 +1,1116 @@ +#include +#include @@ -1504,9 +1561,9 @@ diff -urN linux.old/drivers/char/avalanche_led/ledmod.c linux.dev/drivers/char/a +EXPORT_SYMBOL_NOVERS(register_led_drv); +EXPORT_SYMBOL_NOVERS(deregister_led_drv); + -diff -urN linux.old/drivers/char/avalanche_led/leds.c linux.dev/drivers/char/avalanche_led/leds.c ---- linux.old/drivers/char/avalanche_led/leds.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/char/avalanche_led/leds.c 2005-07-22 06:52:42.976338184 +0200 +diff -urN linux.dev/drivers/char/avalanche_led/leds.c linux.dev2/drivers/char/avalanche_led/leds.c +--- linux.dev/drivers/char/avalanche_led/leds.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev2/drivers/char/avalanche_led/leds.c 2005-10-21 18:03:44.513777000 +0200 @@ -0,0 +1,133 @@ +#include +#include @@ -1641,36 +1698,9 @@ diff -urN linux.old/drivers/char/avalanche_led/leds.c linux.dev/drivers/char/ava + + + -diff -urN linux.old/drivers/char/avalanche_led/Makefile linux.dev/drivers/char/avalanche_led/Makefile ---- linux.old/drivers/char/avalanche_led/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/char/avalanche_led/Makefile 2005-07-22 06:52:42.977338032 +0200 -@@ -0,0 +1,23 @@ -+# File: drivers/char/avalanche_led/Makefile -+# -+# Makefile for the Linux LED device driver. -+# -+ -+ -+O_TARGET := avalanche_led.o -+obj-m := avalanche_led.o -+list-multi := avalanche_led.o -+ -+EXTRA_CFLAGS := -I$(TOPDIR)/include/asm/ar7 -+ -+export-objs := ledmod.o leds.o -+ -+avalanche_led-objs := ledmod.o gpio.o uartled.o leds.o -+ -+include $(TOPDIR)/Rules.make -+ -+avalanche_led.o: $(avalanche_led-objs) -+ $(LD) -r -o $@ $(avalanche_led-objs) -+ -+clean: -+ rm -f core *.o *.a *.s -diff -urN linux.old/drivers/char/avalanche_led/uartled.c linux.dev/drivers/char/avalanche_led/uartled.c ---- linux.old/drivers/char/avalanche_led/uartled.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/char/avalanche_led/uartled.c 2005-07-22 06:52:42.977338032 +0200 +diff -urN linux.dev/drivers/char/avalanche_led/uartled.c linux.dev2/drivers/char/avalanche_led/uartled.c +--- linux.dev/drivers/char/avalanche_led/uartled.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev2/drivers/char/avalanche_led/uartled.c 2005-10-21 18:03:44.529778000 +0200 @@ -0,0 +1,55 @@ +#include +#include @@ -1727,39 +1757,102 @@ diff -urN linux.old/drivers/char/avalanche_led/uartled.c linux.dev/drivers/char/ + return; +} + -diff -urN linux.old/drivers/char/Config.in linux.dev/drivers/char/Config.in ---- linux.old/drivers/char/Config.in 2005-07-10 20:53:55.650624000 +0200 -+++ linux.dev/drivers/char/Config.in 2005-07-22 06:52:58.716945248 +0200 -@@ -133,6 +133,10 @@ - fi - fi - fi -+if [ "$CONFIG_AR7" = "y" ]; then -+ bool 'Enable LED support' CONFIG_AR7_LED -+fi +diff -urN linux.dev/include/asm-mips/ar7/led_config.h linux.dev2/include/asm-mips/ar7/led_config.h +--- linux.dev/include/asm-mips/ar7/led_config.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev2/include/asm-mips/ar7/led_config.h 2005-10-21 17:02:25.568327000 +0200 +@@ -0,0 +1,55 @@ ++/****************************************************************************** ++ * FILE PURPOSE: - LED config Header ++ ****************************************************************************** ++ * FILE NAME: led_config.h ++ * ++ * DESCRIPTION: Header file for LED configuration parameters ++ * and data structures ++ * ++ * REVISION HISTORY: ++ * 11 Oct 03 - PSP TII ++ * ++ * (C) Copyright 2002, Texas Instruments, Inc ++ *******************************************************************************/ ++ + - if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_ZORRO" = "y" ]; then - tristate 'Commodore A2232 serial support (EXPERIMENTAL)' CONFIG_A2232 - fi -diff -urN linux.old/drivers/char/Makefile linux.dev/drivers/char/Makefile ---- linux.old/drivers/char/Makefile 2005-07-10 20:53:55.651623000 +0200 -+++ linux.dev/drivers/char/Makefile 2005-07-22 06:53:35.321380528 +0200 -@@ -190,6 +190,12 @@ - obj-$(CONFIG_PCI) += keyboard.o $(KEYMAP) - endif - -+# -+# Texas Intruments LED driver -+# -+obj-$(CONFIG_AR7_LED) += avalanche_led/avalanche_led.o -+subdir-$(CONFIG_AR7_LED) += avalanche_led ++#ifndef __LED_CONFIG__ ++#define __LED_CONFIG__ + - obj-$(CONFIG_HIL) += hp_keyb.o - obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o - obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o -diff -urN linux.old/include/asm-mips/ar7/ledapp.h linux.dev/include/asm-mips/ar7/ledapp.h ---- linux.old/include/asm-mips/ar7/ledapp.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/ledapp.h 2005-07-22 06:52:42.982337272 +0200 ++/* LED config parameters */ ++#define MAX_GPIO_PIN_NUM 64 ++#define MAX_GPIOS_PER_STATE 5 ++#define MAX_MODULE_ENTRIES 25 ++#define MAX_MODULE_INSTANCES 4 ++#define MAX_STATE_ENTRIES 25 ++#define MAX_LED_ENTRIES 25 ++ ++ ++/* LED modes */ ++#define LED_OFF 0 ++#define LED_ON 1 ++#define LED_ONESHOT_OFF 2 ++#define LED_ONESHOT_ON 3 ++#define LED_FLASH 4 ++#define LED_BLINK_CODE0 5 /*--- param1: on time, param2: blink nr , (param2 > 100 blink off) ---*/ ++#define LED_BLINK_CODE1 6 ++#define LED_BLINK_CODE2 7 ++ ++#define NUM_LED_MODES 8 ++ ++ ++ ++/* Data structure for LED configuration */ ++typedef struct led_config{ ++ unsigned char name[80]; ++ unsigned int instance; ++ unsigned int state; ++ unsigned int gpio[MAX_GPIOS_PER_STATE]; ++ unsigned int mode[MAX_GPIOS_PER_STATE]; ++ unsigned int gpio_num; ++ unsigned int param1; ++ unsigned int param2; ++}LED_CONFIG_T; ++ ++ ++#endif /* __LED_CONFIG__ */ +diff -urN linux.dev/include/asm-mips/ar7/led_hal.h linux.dev2/include/asm-mips/ar7/led_hal.h +--- linux.dev/include/asm-mips/ar7/led_hal.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev2/include/asm-mips/ar7/led_hal.h 2005-10-21 17:02:25.568327000 +0200 +@@ -0,0 +1,30 @@ ++/****************************************************************************** ++ * FILE PURPOSE: - LED HAL module Header ++ ****************************************************************************** ++ * FILE NAME: led_hal.h ++ * ++ * DESCRIPTION: LED HAL API's. ++ * ++ * REVISION HISTORY: ++ * 11 Oct 03 - PSP TII ++ * ++ * (C) Copyright 2002, Texas Instruments, Inc ++ *******************************************************************************/ ++ ++#ifndef __LED_HAL__ ++#define __LED_HAL__ ++ ++/* Interface prototypes */ ++#include "led_config.h" ++ ++int avalanche_led_hal_init (int *gpio_off_value, int num_gpio_pins); ++int avalanche_led_config_set (LED_CONFIG_T * led_cfg); ++int avalanche_led_config_get (LED_CONFIG_T *led_cfg,int module_id,int instance, int state); ++void *avalanche_led_register (const char *module_name, int instance_num); ++void avalanche_led_action (void *handle, int state_id); ++void avalanche_led_late_actions(void); ++int avalanche_led_unregister (void *handle); ++void avalanche_led_free_all(void); ++void avalanche_led_hal_exit (void); ++ ++#endif /*__LED_HAL__ */ +diff -urN linux.dev/include/asm-mips/ar7/ledapp.h linux.dev2/include/asm-mips/ar7/ledapp.h +--- linux.dev/include/asm-mips/ar7/ledapp.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev2/include/asm-mips/ar7/ledapp.h 2005-10-21 18:03:44.573780750 +0200 @@ -0,0 +1,59 @@ +#ifndef __LED_APP__ +#define __LED_APP__ diff --git a/openwrt/target/linux/linux-2.4/patches/ar7/005-vlynq.patch b/openwrt/target/linux/linux-2.4/patches/ar7/005-vlynq.patch deleted file mode 100644 index ee76d4774b..0000000000 --- a/openwrt/target/linux/linux-2.4/patches/ar7/005-vlynq.patch +++ /dev/null @@ -1,2316 +0,0 @@ -diff -urN linux.old/drivers/char/avalanche_vlynq/Makefile linux.dev/drivers/char/avalanche_vlynq/Makefile ---- linux.old/drivers/char/avalanche_vlynq/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/char/avalanche_vlynq/Makefile 2005-07-22 06:32:53.345189608 +0200 -@@ -0,0 +1,14 @@ -+# -+# Makefile for the linux kernel. -+# -+# Note! Dependencies are done automagically by 'make dep', which also -+# removes any old dependencies. DON'T put your own dependencies here -+# unless it's something special (ie not a .c file). -+# -+# Note 2! The CFLAGS definitions are now in the main makefile... -+ -+O_TARGET := avalanche_vlynq.o -+ -+obj-y += vlynq_drv.o vlynq_hal.o vlynq_board.o -+ -+include $(TOPDIR)/Rules.make -diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_board.c linux.dev/drivers/char/avalanche_vlynq/vlynq_board.c ---- linux.old/drivers/char/avalanche_vlynq/vlynq_board.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/char/avalanche_vlynq/vlynq_board.c 2005-07-22 06:34:39.448059520 +0200 -@@ -0,0 +1,182 @@ -+/* -+ * Jeff Harrell, jharrell@ti.com -+ * Copyright (C) 2001 Texas Instruments, Inc. All rights reserved. -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ * -+ * Texas Instruments Sangam specific setup. -+ */ -+#include -+#include -+#include -+#include -+ -+#define SYS_VLYNQ_LOCAL_INTERRUPT_VECTOR 30 /* MSB - 1 bit */ -+#define SYS_VLYNQ_REMOTE_INTERRUPT_VECTOR 31 /* MSB bit */ -+#define SYS_VLYNQ_OPTIONS 0x7F; /* all options*/ -+ -+/* These defines are board specific */ -+ -+ -+#define VLYNQ0_REMOTE_WINDOW1_OFFSET (0x0C000000) -+#define VLYNQ0_REMOTE_WINDOW1_SIZE (0x500) -+ -+ -+#define VLYNQ1_REMOTE_WINDOW1_OFFSET (0x0C000000) -+#define VLYNQ1_REMOTE_WINDOW1_SIZE (0x500) -+ -+ -+extern VLYNQ_DEV vlynqDevice0, vlynqDevice1; -+int vlynq_init_status[2] = {0, 0}; -+static int reset_hack = 1; -+ -+void vlynq_ar7wrd_dev_init() -+{ -+ *(unsigned long*) AVALANCHE_GPIO_ENBL |= (1<<18); -+ vlynq_delay(20000); -+ *(unsigned long*) AVALANCHE_GPIO_DIR &= ~(1<<18); -+ vlynq_delay(20000); -+ *(unsigned long*) AVALANCHE_GPIO_DATA_OUT&= ~(1<<18); -+ vlynq_delay(50000); -+ *(unsigned long*) AVALANCHE_GPIO_DATA_OUT|= (1<<18); -+ vlynq_delay(50000); -+ -+ /* Initialize the MIPS host vlynq driver for a given vlynq interface */ -+ vlynqDevice0.dev_idx = 0; /* first vlynq module - this parameter is for reference only */ -+ vlynqDevice0.module_base = AVALANCHE_LOW_VLYNQ_CONTROL_BASE; /* vlynq0 module base address */ -+ -+#if defined(CONFIG_VLYNQ_CLK_LOCAL) -+ vlynqDevice0.clk_source = VLYNQ_CLK_SOURCE_LOCAL; -+#else -+ vlynqDevice0.clk_source = VLYNQ_CLK_SOURCE_REMOTE; -+#endif -+ vlynqDevice0.clk_div = 0x01; /* board/hardware specific */ -+ vlynqDevice0.state = VLYNQ_DRV_STATE_UNINIT; /* uninitialized module */ -+ -+ /* Populate vlynqDevice0.local_mem & Vlynq0.remote_mem based on system configuration */ -+ /*Local memory configuration */ -+ -+ /* Demiurg : not good !*/ -+#if 0 -+ vlynqDevice0.local_mem.Txmap= AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE & ~(0xc0000000) ; /* physical address */ -+ vlynqDevice0.remote_mem.RxOffset[0]= VLYNQ0_REMOTE_WINDOW1_OFFSET; /* This is specific to the board on the other end */ -+ vlynqDevice0.remote_mem.RxSize[0]=VLYNQ0_REMOTE_WINDOW1_SIZE; -+#endif -+ -+ /* Demiurg : This is how it should be ! */ -+ vlynqDevice0.local_mem.Txmap = PHYSADDR(AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE); -+#define VLYNQ_ACX111_MEM_OFFSET 0xC0000000 /* Physical address of ACX111 memory */ -+#define VLYNQ_ACX111_MEM_SIZE 0x00040000 /* Total size of the ACX111 memory */ -+#define VLYNQ_ACX111_REG_OFFSET 0xF0000000 /* PHYS_ADDR of ACX111 control registers */ -+#define VLYNQ_ACX111_REG_SIZE 0x00022000 /* Size of ACX111 registers area, MAC+PHY */ -+#define ACX111_VL1_REMOTE_SIZE 0x1000000 -+ vlynqDevice0.remote_mem.RxOffset[0] = VLYNQ_ACX111_MEM_OFFSET; -+ vlynqDevice0.remote_mem.RxSize[0] = VLYNQ_ACX111_MEM_SIZE ; -+ vlynqDevice0.remote_mem.RxOffset[1] = VLYNQ_ACX111_REG_OFFSET; -+ vlynqDevice0.remote_mem.RxSize[1] = VLYNQ_ACX111_REG_SIZE ; -+ vlynqDevice0.remote_mem.Txmap = 0; -+ vlynqDevice0.local_mem.RxOffset[0] = AVALANCHE_SDRAM_BASE; -+ vlynqDevice0.local_mem.RxSize[0] = ACX111_VL1_REMOTE_SIZE; -+ -+ -+ /* Local interrupt configuration */ -+ vlynqDevice0.local_irq.intLocal = VLYNQ_INT_LOCAL; /* Host handles vlynq interrupts*/ -+ vlynqDevice0.local_irq.intRemote = VLYNQ_INT_ROOT_ISR; /* vlynq root isr used */ -+ vlynqDevice0.local_irq.map_vector = SYS_VLYNQ_LOCAL_INTERRUPT_VECTOR; -+ vlynqDevice0.local_irq.intr_ptr = 0; /* Since remote interrupts part of vlynq root isr this is unused */ -+ -+ /* Remote interrupt configuration */ -+ vlynqDevice0.remote_irq.intLocal = VLYNQ_INT_REMOTE; /* MIPS handles interrupts */ -+ vlynqDevice0.remote_irq.intRemote = VLYNQ_INT_ROOT_ISR; /* Not significant since MIPS handles interrupts */ -+ vlynqDevice0.remote_irq.map_vector = SYS_VLYNQ_REMOTE_INTERRUPT_VECTOR; -+ vlynqDevice0. remote_irq.intr_ptr = AVALANCHE_INTC_BASE; /* Not significant since MIPS handles interrupts */ -+ -+ if(reset_hack != 1) -+ printk("About to re-init the VLYNQ.\n"); -+ -+ if(vlynq_init(&vlynqDevice0,VLYNQ_INIT_PERFORM_ALL)== 0) -+ { -+ /* Suraj added the following to keep the 1130 going. */ -+ vlynq_interrupt_vector_set(&vlynqDevice0, 0 /* intr vector line running into 1130 vlynq */, -+ 0 /* intr mapped onto the interrupt register on remote vlynq and this vlynq */, -+ VLYNQ_REMOTE_DVC, 0 /* polarity active high */, 0 /* interrupt Level triggered */); -+ -+ /* System wide interrupt is 80 for 1130, please note. */ -+ vlynq_init_status[0] = 1; -+ reset_hack = 2; -+ } -+ else -+ { -+ if(reset_hack == 1) -+ printk("VLYNQ INIT FAILED: Please try cold reboot. \n"); -+ else -+ printk("Failed to initialize the VLYNQ interface at insmod.\n"); -+ -+ } -+} -+ -+void vlynq_dev_init(void) -+{ -+ volatile unsigned int *reset_base = (unsigned int *) AVALANCHE_RESET_CONTROL_BASE; -+ -+ *reset_base &= ~((1 << AVALANCHE_LOW_VLYNQ_RESET_BIT)); /* | (1 << AVALANCHE_HIGH_VLYNQ_RESET_BIT)); */ -+ -+ vlynq_delay(20000); -+ -+ /* Bring vlynq out of reset if not already done */ -+ *reset_base |= (1 << AVALANCHE_LOW_VLYNQ_RESET_BIT); /* | (1 << AVALANCHE_HIGH_VLYNQ_RESET_BIT); */ -+ vlynq_delay(20000); /* Allowing sufficient time to VLYNQ to settle down.*/ -+ -+ vlynq_ar7wrd_dev_init( ); -+ -+} -+ -+/* This function is board specific and should be ported for each board. */ -+void remote_vlynq_dev_reset_ctrl(unsigned int module_reset_bit, -+ AVALANCHE_RESET_CTRL_T reset_ctrl) -+{ -+ if(module_reset_bit >= 32) -+ return; -+ -+ switch(module_reset_bit) -+ { -+ case 0: -+ if(OUT_OF_RESET == reset_ctrl) -+ { -+ if(reset_hack) return; -+ -+ vlynq_delay(20000); -+ printk("Un-resetting the remote device.\n"); -+ vlynq_dev_init(); -+ printk("Re-initialized the VLYNQ.\n"); -+ reset_hack = 2; -+ } -+ else if(IN_RESET == reset_ctrl) -+ { -+ *(unsigned long*) AVALANCHE_GPIO_DATA_OUT &= ~(1<<18); -+ -+ vlynq_delay(20000); -+ printk("Resetting the remote device.\n"); -+ reset_hack = 0; -+ } -+ else -+ ; -+ break; -+ -+ default: -+ break; -+ -+ } -+} -+ -diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_drv.c linux.dev/drivers/char/avalanche_vlynq/vlynq_drv.c ---- linux.old/drivers/char/avalanche_vlynq/vlynq_drv.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/char/avalanche_vlynq/vlynq_drv.c 2005-07-22 06:32:53.345189608 +0200 -@@ -0,0 +1,242 @@ -+/****************************************************************************** -+ * FILE PURPOSE: Vlynq Linux Device Driver Source -+ ****************************************************************************** -+ * FILE NAME: vlynq_drv.c -+ * -+ * DESCRIPTION: Vlynq Linux Device Driver Source -+ * -+ * REVISION HISTORY: -+ * -+ * Date Description Author -+ *----------------------------------------------------------------------------- -+ * 17 July 2003 Initial Creation Anant Gole -+ * 17 Dec 2003 Updates Sharath Kumar -+ * -+ * (C) Copyright 2003, Texas Instruments, Inc -+ *******************************************************************************/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+ -+#define TI_VLYNQ_VERSION "0.2" -+ -+/* debug on ? */ -+#define VLYNQ_DEBUG -+ -+/* Macro for debug and error printf's */ -+#ifdef VLYNQ_DEBUG -+#define DBGPRINT printk -+#else -+#define DBGPRINT(x) -+#endif -+ -+#define ERRPRINT printk -+ -+/* Define the max vlynq ports this driver will support. -+ Device name strings are statically added here */ -+#define MAX_VLYNQ_PORTS 2 -+ -+ -+/* Type define for VLYNQ private structure */ -+typedef struct vlynqPriv{ -+ int irq; -+ VLYNQ_DEV *vlynqDevice; -+}VLYNQ_PRIV; -+ -+extern int vlynq_init_status[2]; -+ -+/* Extern Global variable for vlynq devices used in initialization of the vlynq device -+ * These variables need to be populated/initialized by the system as part of initialization -+ * process. The vlynq enumerator can run at initialization and populate these globals -+ */ -+ -+VLYNQ_DEV vlynqDevice0; -+VLYNQ_DEV vlynqDevice1; -+ -+/* Defining dummy macro AVALANCHE_HIGH_VLYNQ_INT to take -+ * care of compilation in case of single vlynq device -+ */ -+ -+#ifndef AVALANCHE_HIGH_VLYNQ_INT -+#define AVALANCHE_HIGH_VLYNQ_INT 0 -+#endif -+ -+ -+ -+/* vlynq private object */ -+VLYNQ_PRIV vlynq_priv[CONFIG_AR7_VLYNQ_PORTS] = { -+ { LNXINTNUM(AVALANCHE_LOW_VLYNQ_INT),&vlynqDevice0}, -+ { LNXINTNUM(AVALANCHE_HIGH_VLYNQ_INT),&vlynqDevice1}, -+}; -+ -+extern void vlynq_dev_init(void); -+ -+ -+/* =================================== all the operations */ -+ -+static int -+vlynq_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) -+{ -+ return 0; -+} -+ -+static struct file_operations vlynq_fops = { -+ owner: THIS_MODULE, -+ ioctl: vlynq_ioctl, -+}; -+ -+/* Vlynq device object */ -+static struct miscdevice vlynq_dev [MAX_VLYNQ_PORTS] = { -+ { MISC_DYNAMIC_MINOR , "vlynq0", &vlynq_fops }, -+ { MISC_DYNAMIC_MINOR , "vlynq1", &vlynq_fops }, -+}; -+ -+ -+/* Proc read function */ -+static int -+vlynq_read_link_proc(char *buf, char **start, off_t offset, int count, int *eof, void *unused) -+{ -+ int instance; -+ int len = 0; -+ -+ len += sprintf(buf +len,"VLYNQ Devices : %d\n",CONFIG_AR7_VLYNQ_PORTS); -+ -+ for(instance =0;instance < CONFIG_AR7_VLYNQ_PORTS;instance++) -+ { -+ int link_state; -+ char *link_msg[] = {" DOWN "," UP "}; -+ -+ if(vlynq_init_status[instance] == 0) -+ link_state = 0; -+ -+ else if (vlynq_link_check(vlynq_priv[instance].vlynqDevice)) -+ link_state = 1; -+ -+ else -+ link_state = 0; -+ -+ len += sprintf(buf + len, "VLYNQ %d: Link state: %s\n",instance,link_msg[link_state]); -+ -+ } -+ /* Print info about vlynq device 1 */ -+ -+ return len; -+} -+ -+ -+/* Proc function to display driver version */ -+static int -+vlynq_read_ver_proc(char *buf, char **start, off_t offset, int count, int *eof, void *data) -+{ -+ int instance; -+ int len=0; -+ -+ len += sprintf(buf +len,"\nTI Linux VLYNQ Driver Version %s\n",TI_VLYNQ_VERSION); -+ return len; -+} -+ -+ -+ -+ -+/* Wrapper for vlynq ISR */ -+static void lnx_vlynq_root_isr(int irq, void * arg, struct pt_regs *regs) -+{ -+ vlynq_root_isr(arg); -+} -+ -+/* =================================== init and cleanup */ -+ -+int vlynq_init_module(void) -+{ -+ int ret; -+ int unit = 0; -+ int instance_count = CONFIG_AR7_VLYNQ_PORTS; -+ volatile int *ptr; -+ -+ vlynq_dev_init(); -+ -+ DBGPRINT("Vlynq CONFIG_AR7_VLYNQ_PORTS=%d\n", CONFIG_AR7_VLYNQ_PORTS); -+ /* If num of configured vlynq ports > supported by driver return error */ -+ if (instance_count > MAX_VLYNQ_PORTS) -+ { -+ ERRPRINT("ERROR: vlynq_init_module(): Max %d supported\n", MAX_VLYNQ_PORTS); -+ return (-1); -+ } -+ -+ /* register the misc device */ -+ for (unit = 0; unit < CONFIG_AR7_VLYNQ_PORTS; unit++) -+ { -+ ret = misc_register(&vlynq_dev[unit]); -+ -+ if(ret < 0) -+ { -+ ERRPRINT("ERROR:Could not register vlynq device:%d\n",unit); -+ continue; -+ } -+ else -+ DBGPRINT("Vlynq Device %s registered with minor no %d as misc device. Result=%d\n", -+ vlynq_dev[unit].name, vlynq_dev[unit].minor, ret); -+#if 0 -+ -+ DBGPRINT("Calling vlynq init\n"); -+ -+ /* Read the global variable for VLYNQ device structure and initialize vlynq driver */ -+ ret = vlynq_init(vlynq_priv[unit].vlynqDevice,VLYNQ_INIT_PERFORM_ALL ); -+#endif -+ -+ if(vlynq_init_status[unit] == 0) -+ { -+ printk("VLYNQ %d : init failed\n",unit); -+ continue; -+ } -+ -+ /* Check link before proceeding */ -+ if (!vlynq_link_check(vlynq_priv[unit].vlynqDevice)) -+ { -+ DBGPRINT("\nError: Vlynq link not available.trying once before Exiting"); -+ } -+ else -+ { -+ DBGPRINT("Vlynq instance:%d Link UP\n",unit); -+ -+ /* Install the vlynq local root ISR */ -+ request_irq(vlynq_priv[unit].irq,lnx_vlynq_root_isr,0,vlynq_dev[unit].name,vlynq_priv[unit].vlynqDevice); -+ } -+ } -+ -+ /* Creating proc entry for the devices */ -+ create_proc_read_entry("avalanche/vlynq_link", 0, NULL, vlynq_read_link_proc, NULL); -+ create_proc_read_entry("avalanche/vlynq_ver", 0, NULL, vlynq_read_ver_proc, NULL); -+ -+ return 0; -+} -+ -+void vlynq_cleanup_module(void) -+{ -+ int unit = 0; -+ -+ for (unit = 0; unit < CONFIG_AR7_VLYNQ_PORTS; unit++) -+ { -+ DBGPRINT("vlynq_cleanup_module(): Unregistring misc device %s\n",vlynq_dev[unit].name); -+ misc_deregister(&vlynq_dev[unit]); -+ } -+ -+ remove_proc_entry("avalanche/vlynq_link", NULL); -+ remove_proc_entry("avalanche/vlynq_ver", NULL); -+} -+ -+ -+module_init(vlynq_init_module); -+module_exit(vlynq_cleanup_module); -+ -diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_hal.c linux.dev/drivers/char/avalanche_vlynq/vlynq_hal.c ---- linux.old/drivers/char/avalanche_vlynq/vlynq_hal.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/char/avalanche_vlynq/vlynq_hal.c 2005-07-22 06:32:53.359187480 +0200 -@@ -0,0 +1,1214 @@ -+/*************************************************************************** -+**+----------------------------------------------------------------------+** -+**| **** |** -+**| **** |** -+**| ******o*** |** -+**| ********_///_**** |** -+**| ***** /_//_/ **** |** -+**| ** ** (__/ **** |** -+**| ********* |** -+**| **** |** -+**| *** |** -+**| |** -+**| Copyright (c) 2003 Texas Instruments Incorporated |** -+**| ALL RIGHTS RESERVED |** -+**| |** -+**| Permission is hereby granted to licensees of Texas Instruments |** -+**| Incorporated (TI) products to use this computer program for the sole |** -+**| purpose of implementing a licensee product based on TI products. |** -+**| No other rights to reproduce, use, or disseminate this computer |** -+**| program, whether in part or in whole, are granted. |** -+**| |** -+**| TI makes no representation or warranties with respect to the |** -+**| performance of this computer program, and specifically disclaims |** -+**| any responsibility for any damages, special or consequential, |** -+**| connected with the use of this program. |** -+**| |** -+**+----------------------------------------------------------------------+** -+***************************************************************************/ -+ -+/*************************************************************************** -+ * ------------------------------------------------------------------------------ -+ * Module : vlynq_hal.c -+ * Description : This file implements VLYNQ HAL API. -+ * ------------------------------------------------------------------------------ -+ ***************************************************************************/ -+ -+#include -+#include -+#include -+ -+/**** Local Function prototypes *******/ -+static int vlynqInterruptInit(VLYNQ_DEV *pdev); -+static void vlynq_configClock(VLYNQ_DEV *pdev); -+ -+/*** Second argument must be explicitly type casted to -+ * (VLYNQ_DEV*) inside the following functions */ -+static void vlynq_local_module_isr(void *arg1, void *arg2, void *arg3); -+static void vlynq_remote_module_isr(void *arg1, void *arg2, void *arg3); -+ -+ -+volatile int vlynq_delay_value = 0; -+ -+/* Code adopted from original vlynq driver */ -+void vlynq_delay(unsigned int clktime) -+{ -+ int i = 0; -+ volatile int *ptr = &vlynq_delay_value; -+ *ptr = 0; -+ -+ /* We are assuming that the each cycle takes about -+ * 23 assembly instructions. */ -+ for(i = 0; i < (clktime + 23)/23; i++) -+ { -+ *ptr = *ptr + 1; -+ } -+} -+ -+ -+/* ---------------------------------------------------------------------------- -+ * Function : vlynq_configClock() -+ * Description: Configures clock settings based on input parameters -+ * Adapted from original vlyna driver from Cable -+ */ -+static void vlynq_configClock(VLYNQ_DEV * pdev) -+{ -+ unsigned int tmp; -+ -+ switch( pdev->clk_source) -+ { -+ case VLYNQ_CLK_SOURCE_LOCAL: /* we output the clock, clk_div in range [1..8]. */ -+ tmp = ((pdev->clk_div - 1) << 16) | VLYNQ_CTL_CLKDIR_MASK ; -+ VLYNQ_CTRL_REG = tmp; -+ VLYNQ_R_CTRL_REG = 0ul; -+ break; -+ case VLYNQ_CLK_SOURCE_REMOTE: /* we need to set the clock pin as input */ -+ VLYNQ_CTRL_REG = 0ul; -+ tmp = ((pdev->clk_div - 1) << 16) | VLYNQ_CTL_CLKDIR_MASK ; -+ VLYNQ_R_CTRL_REG = tmp; -+ break; -+ default: /* do nothing about the clock, but clear other bits. */ -+ tmp = ~(VLYNQ_CTL_CLKDIR_MASK | VLYNQ_CTL_CLKDIV_MASK); -+ VLYNQ_CTRL_REG &= tmp; -+ break; -+ } -+} -+ -+ /* ---------------------------------------------------------------------------- -+ * Function : vlynq_link_check() -+ * Description: This function checks the current VLYNQ for a link. -+ * An arbitrary amount of time is allowed for the link to come up . -+ * Returns 0 for "no link / failure " and 1 for "link available". -+ * ----------------------------------------------------------------------------- -+ */ -+unsigned int vlynq_link_check( VLYNQ_DEV * pdev) -+{ -+ /*sleep for 64 cycles, allow link to come up*/ -+ vlynq_delay(64); -+ -+ /* check status register return OK if link is found. */ -+ if (VLYNQ_STATUS_REG & VLYNQ_STS_LINK_MASK) -+ { -+ return 1; /* Link Available */ -+ } -+ else -+ { -+ return 0; /* Link Failure */ -+ } -+} -+ -+/* ---------------------------------------------------------------------------- -+ * Function : vlynq_init() -+ * Description: Initialization function accepting paramaters for VLYNQ module -+ * initialization. The Options bitmap decides what operations are performed -+ * as a part of initialization. The Input parameters are obtained through the -+ * sub fields of VLYNQ_DEV structure. -+ */ -+ -+int vlynq_init(VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options) -+{ -+ unsigned int map; -+ unsigned int val=0,cnt,tmp; -+ unsigned int counter=0; -+ VLYNQ_INTERRUPT_CNTRL *intSetting=NULL; -+ -+ /* validate arguments */ -+ if( VLYNQ_OUTRANGE(pdev->clk_source, VLYNQ_CLK_SOURCE_REMOTE, VLYNQ_CLK_SOURCE_NONE) || -+ VLYNQ_OUTRANGE(pdev->clk_div, 8, 1) ) -+ { -+ return VLYNQ_INVALID_ARG; -+ } -+ -+ /** perform all sanity checks first **/ -+ if(pdev->state != VLYNQ_DRV_STATE_UNINIT) -+ return VLYNQ_INVALID_DRV_STATE; -+ -+ /** Initialize local and remote register set addresses- additional -+ * provision to access the registers directly if need be */ -+ pdev->local = (VLYNQ_REG_SET*)pdev->module_base; -+ pdev->remote = (VLYNQ_REG_SET*) (pdev->module_base + VLYNQ_REMOTE_REGS_OFFSET); -+ -+ /* Detect faulty int configuration that might induce int pkt looping */ -+ if ( (options & VLYNQ_INIT_LOCAL_INTERRUPTS) && (options & VLYNQ_INIT_REMOTE_INTERRUPTS) ) -+ { -+ /* case when both local and remote are configured */ -+ if((pdev->local_irq.intLocal== VLYNQ_INT_REMOTE ) /* interrupts transfered to remote from local */ -+ && (pdev->remote_irq.intLocal== VLYNQ_INT_REMOTE) /* interrupts transfered from remote to local */ -+ && ((pdev->local_irq.intRemote == VLYNQ_INT_ROOT_ISR) || (pdev->remote_irq.intRemote == VLYNQ_INT_ROOT_ISR)) ) -+ { -+ return (VLYNQ_INT_CONFIG_ERR); -+ } -+ } -+ -+ pdev->state = VLYNQ_DRV_STATE_ININIT; -+ pdev->intCount = 0; -+ pdev->isrCount = 0; -+ -+ /*** Its assumed that the vlynq module has been brought out of reset -+ * before invocation of vlynq_init. Since, this operation is board specific -+ * it must be handled outside this generic driver */ -+ -+ /* Assert reset the remote device, call reset_cb, -+ * reset CB holds Reset according to the device needs. */ -+ VLYNQ_RESETCB(VLYNQ_RESET_ASSERT); -+ -+ /* Handle VLYNQ clock, HW default (Sense On Reset) is -+ * usually input for all the devices. */ -+ if (options & VLYNQ_INIT_CONFIG_CLOCK) -+ { -+ vlynq_configClock(pdev); -+ } -+ -+ /* Call reset_cb again. It will release the remote device -+ * from reset, and wait for a while. */ -+ VLYNQ_RESETCB(VLYNQ_RESET_DEASSERT); -+ -+ if(options & VLYNQ_INIT_CHECK_LINK ) -+ { -+ /* Check for link up during initialization*/ -+ while( counter < 25 ) -+ { -+ /* loop around giving a chance for link status to settle down */ -+ counter++; -+ if(vlynq_link_check(pdev)) -+ { -+ /* Link is up exit loop*/ -+ break; -+ } -+ -+ vlynq_delay(4000); -+ }/*end of while counter loop */ -+ -+ if(!vlynq_link_check(pdev)) -+ { -+ /* Handle this case as abort */ -+ pdev->state = VLYNQ_DRV_STATE_ERROR; -+ VLYNQ_RESETCB( VLYNQ_RESET_INITFAIL); -+ return VLYNQ_LINK_DOWN; -+ }/* end of if not vlynq_link_check conditional block */ -+ -+ }/*end of if options & VLYNQ_INIT_CHECK_LINK conditional block */ -+ -+ -+ if (options & VLYNQ_INIT_LOCAL_MEM_REGIONS) -+ { -+ /* Initialise local memory regions . This initialization lets -+ * the local host access remote device memory regions*/ -+ int i; -+ -+ /* configure the VLYNQ portal window to a PHYSICAL -+ * address of the local CPU */ -+ VLYNQ_ALIGN4(pdev->local_mem.Txmap); -+ VLYNQ_TXMAP_REG = (pdev->local_mem.Txmap); -+ -+ /*This code assumes input parameter is itself a physical address */ -+ for(i=0; i < VLYNQ_MAX_MEMORY_REGIONS ; i++) -+ { -+ /* Physical address on the remote */ -+ map = i+1; -+ VLYNQ_R_RXMAP_SIZE_REG(map) = 0; -+ if( pdev->remote_mem.RxSize[i]) -+ { -+ VLYNQ_ALIGN4(pdev->remote_mem.RxOffset[i]); -+ VLYNQ_ALIGN4(pdev->remote_mem.RxSize[i]); -+ VLYNQ_R_RXMAP_OFFSET_REG(map) = pdev->remote_mem.RxOffset[i]; -+ VLYNQ_R_RXMAP_SIZE_REG(map) = pdev->remote_mem.RxSize[i]; -+ } -+ } -+ } -+ -+ if(options & VLYNQ_INIT_REMOTE_MEM_REGIONS ) -+ { -+ int i; -+ -+ /* Initialise remote memory regions. This initialization lets remote -+ * device access local host memory regions. It configures the VLYNQ portal -+ * window to a PHYSICAL address of the remote */ -+ VLYNQ_ALIGN4(pdev->remote_mem.Txmap); -+ VLYNQ_R_TXMAP_REG = pdev->remote_mem.Txmap; -+ -+ for( i=0; ilocal_mem.RxSize[i]) -+ { -+ VLYNQ_ALIGN4(pdev->local_mem.RxOffset[i]); -+ VLYNQ_ALIGN4(pdev->local_mem.RxSize[i]); -+ VLYNQ_RXMAP_OFFSET_REG(map) = (pdev->local_mem.RxOffset[i]); -+ VLYNQ_RXMAP_SIZE_REG(map) = (pdev->local_mem.RxSize[i]); -+ } -+ } -+ } -+ -+ /* Adapted from original vlynq driver from cable - Calculate VLYNQ bus width */ -+ pdev->width = 3 + VLYNQ_STATUS_FLD_WIDTH(VLYNQ_STATUS_REG) -+ + VLYNQ_STATUS_FLD_WIDTH(VLYNQ_R_STATUS_REG); -+ -+ /* chance to initialize the device, e.g. to boost VLYNQ -+ * clock by modifying pdev->clk_div or and verify the width. */ -+ VLYNQ_RESETCB(VLYNQ_RESET_LINKESTABLISH); -+ -+ /* Handle VLYNQ clock, HW default (Sense On Reset) is -+ * usually input for all the devices. */ -+ if(options & VLYNQ_INIT_CONFIG_CLOCK ) -+ { -+ vlynq_configClock(pdev); -+ } -+ -+ /* last check for link*/ -+ if(options & VLYNQ_INIT_CHECK_LINK ) -+ { -+ /* Final Check for link during initialization*/ -+ while( counter < 25 ) -+ { -+ /* loop around giving a chance for link status to settle down */ -+ counter++; -+ if(vlynq_link_check(pdev)) -+ { -+ /* Link is up exit loop*/ -+ break; -+ } -+ -+ vlynq_delay(4000); -+ }/*end of while counter loop */ -+ -+ if(!vlynq_link_check(pdev)) -+ { -+ /* Handle this case as abort */ -+ pdev->state = VLYNQ_DRV_STATE_ERROR; -+ VLYNQ_RESETCB( VLYNQ_RESET_INITFAIL); -+ return VLYNQ_LINK_DOWN; -+ }/* end of if not vlynq_link_check conditional block */ -+ -+ } /* end of if options & VLYNQ_INIT_CHECK_LINK */ -+ -+ if(options & VLYNQ_INIT_LOCAL_INTERRUPTS ) -+ { -+ /* Configure local interrupt settings */ -+ intSetting = &(pdev->local_irq); -+ -+ /* Map local module status interrupts to interrupt vector*/ -+ val = intSetting->map_vector << VLYNQ_CTL_INTVEC_SHIFT ; -+ -+ /* enable local module status interrupts */ -+ val |= 0x01 << VLYNQ_CTL_INTEN_SHIFT; -+ -+ if ( intSetting->intLocal == VLYNQ_INT_LOCAL ) -+ { -+ /*set the intLocal bit*/ -+ val |= 0x01 << VLYNQ_CTL_INTLOCAL_SHIFT; -+ } -+ -+ /* Irrespective of whether interrupts are handled locally, program -+ * int2Cfg. Error checking for accidental loop(when intLocal=0 and int2Cfg=1 -+ * i.e remote packets are set intPending register->which will result in -+ * same packet being sent out) has been done already -+ */ -+ -+ if (intSetting->intRemote == VLYNQ_INT_ROOT_ISR) -+ { -+ /* Set the int2Cfg register, so that remote interrupt -+ * packets are written to intPending register */ -+ val |= 0x01 << VLYNQ_CTL_INT2CFG_SHIFT; -+ -+ /* Set intPtr register to point to intPending register */ -+ VLYNQ_INT_PTR_REG = VLYNQ_INT_PENDING_REG_PTR ; -+ } -+ else -+ { -+ /*set the interrupt pointer register*/ -+ VLYNQ_INT_PTR_REG = intSetting->intr_ptr; -+ /* Dont bother to modify int2Cfg as it would be zero */ -+ } -+ -+ /** Clear bits related to INT settings in control register **/ -+ VLYNQ_CTRL_REG = VLYNQ_CTRL_REG & (~VLYNQ_CTL_INTFIELDS_CLEAR_MASK); -+ -+ /** Or the bits to be set with Control register **/ -+ VLYNQ_CTRL_REG = VLYNQ_CTRL_REG | val; -+ -+ /* initialise local ICB */ -+ if(vlynqInterruptInit(pdev)==VLYNQ_MEMALLOC_FAIL) -+ return VLYNQ_MEMALLOC_FAIL; -+ -+ /* Install handler for local module status interrupts. By default when -+ * local interrupt setting is initialised, the local module status are -+ * enabled and handler hooked up */ -+ if(vlynq_install_isr(pdev, intSetting->map_vector, vlynq_local_module_isr, -+ pdev, NULL, NULL) == VLYNQ_INVALID_ARG) -+ return VLYNQ_INVALID_ARG; -+ } /* end of init local interrupts */ -+ -+ if(options & VLYNQ_INIT_REMOTE_INTERRUPTS ) -+ { -+ /* Configure remote interrupt settings from configuration */ -+ intSetting = &(pdev->remote_irq); -+ -+ /* Map remote module status interrupts to remote interrupt vector*/ -+ val = intSetting->map_vector << VLYNQ_CTL_INTVEC_SHIFT ; -+ /* enable remote module status interrupts */ -+ val |= 0x01 << VLYNQ_CTL_INTEN_SHIFT; -+ -+ if ( intSetting->intLocal == VLYNQ_INT_LOCAL ) -+ { -+ /*set the intLocal bit*/ -+ val |= 0x01 << VLYNQ_CTL_INTLOCAL_SHIFT; -+ } -+ -+ /* Irrespective of whether interrupts are handled locally, program -+ * int2Cfg. Error checking for accidental loop(when intLocal=0 and int2Cfg=1 -+ * i.e remote packets are set intPending register->which will result in -+ * same packet being sent out) has been done already -+ */ -+ -+ if (intSetting->intRemote == VLYNQ_INT_ROOT_ISR) -+ { -+ /* Set the int2Cfg register, so that remote interrupt -+ * packets are written to intPending register */ -+ val |= 0x01 << VLYNQ_CTL_INT2CFG_SHIFT; -+ /* Set intPtr register to point to intPending register */ -+ VLYNQ_R_INT_PTR_REG = VLYNQ_R_INT_PENDING_REG_PTR ; -+ } -+ else -+ { -+ /*set the interrupt pointer register*/ -+ VLYNQ_R_INT_PTR_REG = intSetting->intr_ptr; -+ /* Dont bother to modify int2Cfg as it would be zero */ -+ } -+ -+ if( (intSetting->intLocal == VLYNQ_INT_REMOTE) && -+ (options & VLYNQ_INIT_LOCAL_INTERRUPTS) && -+ (pdev->local_irq.intRemote == VLYNQ_INT_ROOT_ISR) ) -+ { -+ /* Install handler for remote module status interrupts. By default when -+ * remote interrupts are forwarded to local root_isr then remote_module_isr is -+ * enabled and handler hooked up */ -+ if(vlynq_install_isr(pdev,intSetting->map_vector,vlynq_remote_module_isr, -+ pdev, NULL, NULL) == VLYNQ_INVALID_ARG) -+ return VLYNQ_INVALID_ARG; -+ } -+ -+ -+ /** Clear bits related to INT settings in control register **/ -+ VLYNQ_R_CTRL_REG = VLYNQ_R_CTRL_REG & (~VLYNQ_CTL_INTFIELDS_CLEAR_MASK); -+ -+ /** Or the bits to be set with the remote Control register **/ -+ VLYNQ_R_CTRL_REG = VLYNQ_R_CTRL_REG | val; -+ -+ } /* init remote interrupt settings*/ -+ -+ if(options & VLYNQ_INIT_CLEAR_ERRORS ) -+ { -+ /* Clear errors during initialization */ -+ tmp = VLYNQ_STATUS_REG & (VLYNQ_STS_RERROR_MASK | VLYNQ_STS_LERROR_MASK); -+ VLYNQ_STATUS_REG = tmp; -+ tmp = VLYNQ_R_STATUS_REG & (VLYNQ_STS_RERROR_MASK | VLYNQ_STS_LERROR_MASK); -+ VLYNQ_R_STATUS_REG = tmp; -+ } -+ -+ /* clear int status */ -+ val = VLYNQ_INT_STAT_REG; -+ VLYNQ_INT_STAT_REG = val; -+ -+ /* finish initialization */ -+ pdev->state = VLYNQ_DRV_STATE_RUN; -+ VLYNQ_RESETCB( VLYNQ_RESET_INITOK); -+ return VLYNQ_SUCCESS; -+ -+} -+ -+ -+/* ---------------------------------------------------------------------------- -+ * Function : vlynqInterruptInit() -+ * Description: This local function is used to set up the ICB table for the -+ * VLYNQ_STATUS_REG vlynq module. The input parameter "pdev" points the vlynq -+ * device instance whose ICB is allocated. -+ * Return : returns VLYNQ_SUCCESS or vlynq error for failure -+ * ----------------------------------------------------------------------------- -+ */ -+static int vlynqInterruptInit(VLYNQ_DEV *pdev) -+{ -+ int i, numslots; -+ -+ /* Memory allocated statically. -+ * Initialise ICB,free list.Indicate primary slot empty. -+ * Intialise intVector <==> map_vector translation table*/ -+ for(i=0; i < VLYNQ_NUM_INT_BITS; i++) -+ { -+ pdev->pIntrCB[i].isr = NULL; -+ pdev->pIntrCB[i].next = NULL; /*nothing chained */ -+ pdev->vector_map[i] = -1; /* indicates unmapped */ -+ } -+ -+ /* In the ICB slots, [VLYNQ_NUM_INT_BITS i.e 32 to ICB array size) are expansion slots -+ * required only when interrupt chaining/sharing is supported. In case -+ * of chained interrupts the list starts from primary slot and the -+ * additional slots are obtained from the common free area */ -+ -+ /* Initialise freelist */ -+ -+ numslots = VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS; -+ -+ if (numslots > VLYNQ_NUM_INT_BITS) -+ { -+ pdev->freelist = &(pdev->pIntrCB[VLYNQ_NUM_INT_BITS]); -+ -+ for(i = VLYNQ_NUM_INT_BITS; i < (numslots-1) ; i++) -+ { -+ pdev->pIntrCB[i].next = &(pdev->pIntrCB[i+1]); -+ pdev->pIntrCB[i].isr = NULL; -+ } -+ pdev->pIntrCB[i].next=NULL; /* Indicate end of freelist*/ -+ pdev->pIntrCB[i].isr=NULL; -+ } -+ else -+ { -+ pdev->freelist = NULL; -+ } -+ -+ /** Reset mapping for IV 0-7 **/ -+ VLYNQ_IVR_03TO00_REG = 0; -+ VLYNQ_IVR_07TO04_REG = 0; -+ -+ return VLYNQ_SUCCESS; -+} -+ -+/** remember that hooking up of root ISR handler with the interrupt controller -+ * is not done as a part of this driver. Typically, it must be done after -+ * invoking vlynq_init*/ -+ -+ -+ /* ---------------------------------------------------------------------------- -+ * ISR with the SOC interrupt controller. This ISR typically scans -+ * the Int PENDING/SET register in the VLYNQ module and calls the -+ * appropriate ISR associated with the correponding vector number. -+ * ----------------------------------------------------------------------------- -+ */ -+void vlynq_root_isr(void *arg) -+{ -+ int source; /* Bit position of pending interrupt, start from 0 */ -+ unsigned int interrupts, clrInterrupts; -+ VLYNQ_DEV * pdev; -+ VLYNQ_INTR_CNTRL_ICB *entry; -+ -+ pdev=(VLYNQ_DEV*)(arg); /*obtain the vlynq device pointer*/ -+ -+ interrupts = VLYNQ_INT_STAT_REG; /* Get the list of pending interrupts */ -+ VLYNQ_INT_STAT_REG = interrupts; /* clear the int CR register */ -+ clrInterrupts = interrupts; /* save them for further analysis */ -+ -+ debugPrint("vlynq_root_isr: dev %u. INTCR = 0x%08lx\n", pdev->dev_idx, clrInterrupts,0,0,0,0); -+ -+ /* Scan interrupt bits */ -+ source =0; -+ while( clrInterrupts != 0) -+ { -+ /* test if bit is set? */ -+ if( 0x1ul & clrInterrupts) -+ { -+ entry = &(pdev->pIntrCB[source]); /* Get the ISR entry */ -+ pdev->intCount++; /* update interrupt count */ -+ if(entry->isr != NULL) -+ { -+ do -+ { -+ pdev->isrCount++; /* update isr invocation count */ -+ /* Call the user ISR and update the count for ISR */ -+ entry->isrCount++; -+ entry->isr(entry->arg1, entry->arg2, entry->arg3); -+ if (entry->next == NULL) break; -+ entry = entry->next; -+ -+ } while (entry->isr != NULL); -+ } -+ else -+ { -+ debugPrint(" ISR not installed for vlynq vector:%d\n",source,0,0,0,0,0); -+ } -+ } -+ clrInterrupts >>= 1; /* Next source bit */ -+ ++source; -+ } /* endWhile clrInterrupts != 0 */ -+} -+ -+ -+ /* ---------------------------------------------------------------------------- -+ * Function : vlynq_local__module_isr() -+ * Description: This ISR is attached to the local VLYNQ interrupt vector -+ * by the Vlynq Driver when local interrupts are being handled. i.e. -+ * intLocal=1. This ISR handles local Vlynq module status interrupts only -+ * AS a part of this ISR, user callback in VLYNQ_DEV structure -+ * is invoked. -+ * VLYNQ_DEV is passed as arg1. arg2 and arg3 are unused. -+ * ----------------------------------------------------------------------------- -+ */ -+static void vlynq_local_module_isr(void *arg1,void *arg2, void *arg3) -+{ -+ VLYNQ_REPORT_CB func; -+ unsigned int dwStatRegVal; -+ VLYNQ_DEV * pdev; -+ -+ pdev = (VLYNQ_DEV*) arg1; -+ /* Callback function is read from the device pointer that is passed as an argument */ -+ func = pdev->report_cb; -+ -+ /* read local status register */ -+ dwStatRegVal = VLYNQ_STATUS_REG; -+ -+ /* clear pending events */ -+ VLYNQ_STATUS_REG = dwStatRegVal; -+ -+ /* invoke user callback */ -+ if( func != NULL) -+ func( pdev, VLYNQ_LOCAL_DVC, dwStatRegVal); -+ -+} -+ -+ /* ---------------------------------------------------------------------------- -+ * Function : vlynq_remote_module_isr() -+ * Description: This ISR is attached to the remote VLYNQ interrupt vector -+ * by the Vlynq Driver when remote interrupts are being handled locally. i.e. -+ * intLocal=1. This ISR handles local Vlynq module status interrupts only -+ * AS a part of this ISR, user callback in VLYNQ_DEV structure -+ * is invoked. -+ * The parameters irq,regs ar unused. -+ * ----------------------------------------------------------------------------- -+ */ -+static void vlynq_remote_module_isr(void *arg1,void *arg2, void *arg3) -+{ -+ VLYNQ_REPORT_CB func; -+ unsigned int dwStatRegVal; -+ VLYNQ_DEV * pdev; -+ -+ -+ pdev = (VLYNQ_DEV*) arg1; -+ -+ /* Callback function is read from the device pointer that is passed as an argument */ -+ func = pdev->report_cb; -+ -+ /* read local status register */ -+ dwStatRegVal = VLYNQ_R_STATUS_REG; -+ -+ /* clear pending events */ -+ VLYNQ_R_STATUS_REG = dwStatRegVal; -+ -+ /* invoke user callback */ -+ if( func != NULL) -+ func( pdev, VLYNQ_REMOTE_DVC, dwStatRegVal); -+ -+} -+ -+/* ---------------------------------------------------------------------------- -+ * Function : vlynq_interrupt_get_count() -+ * Description: This function returns the number of times a particular intr -+ * has been invoked. -+ * -+ * It returns 0, if erroneous map_vector is specified or if the corres isr -+ * has not been registered with VLYNQ. -+ */ -+unsigned int vlynq_interrupt_get_count(VLYNQ_DEV *pdev, -+ unsigned int map_vector) -+{ -+ VLYNQ_INTR_CNTRL_ICB *entry; -+ unsigned int count = 0; -+ -+ if (map_vector > (VLYNQ_NUM_INT_BITS-1)) -+ return count; -+ -+ entry = &(pdev->pIntrCB[map_vector]); -+ -+ if (entry) -+ count = entry->isrCount; -+ -+ return (count); -+} -+ -+ -+/* ---------------------------------------------------------------------------- -+ * Function : vlynq_install_isr() -+ * Description: This function installs ISR for Vlynq interrupt vector -+ * bits(in IntPending register). This function should be used only when -+ * Vlynq interrupts are being handled locally(remote may be programmed to send -+ * interrupt packets).Also, the int2cfg should be 1 and the least significant -+ * 8 bits of the Interrupt Pointer Register must point to Interrupt -+ * Pending/Set Register). -+ * If host int2cfg=0 and the Interrupt Pointer register contains -+ * the address of the interrupt set register in the interrupt controller -+ * module of the local device , then the ISR for the remote interrupt must be -+ * directly registered with the Interrupt controller and must not use this API -+ * Note: this function simply installs the ISR in ICB It doesnt modify -+ * any register settings -+ */ -+int -+vlynq_install_isr(VLYNQ_DEV *pdev, -+ unsigned int map_vector, -+ VLYNQ_INTR_CNTRL_ISR isr, -+ void *arg1, void *arg2, void *arg3) -+{ -+ VLYNQ_INTR_CNTRL_ICB *entry; -+ -+ if ( (map_vector > (VLYNQ_NUM_INT_BITS-1)) || (isr == NULL) ) -+ return VLYNQ_INVALID_ARG; -+ -+ entry = &(pdev->pIntrCB[map_vector]); -+ -+ if(entry->isr == NULL) -+ { -+ entry->isr = isr; -+ entry->arg1 = arg1; -+ entry->arg2 = arg2; -+ entry->arg3 = arg3; -+ entry->next = NULL; -+ } -+ else -+ { -+ /** No more empty slots,return error */ -+ if(pdev->freelist == NULL) -+ return VLYNQ_MEMALLOC_FAIL; -+ -+ while(entry->next != NULL) -+ { -+ entry = entry->next; -+ } -+ -+ /* Append new node to the chain */ -+ entry->next = pdev->freelist; -+ /* Remove the appended node from freelist */ -+ pdev->freelist = pdev->freelist->next; -+ entry= entry->next; -+ -+ /*** Set the ICB fields ***/ -+ entry->isr = isr; -+ entry->arg1 = arg1; -+ entry->arg2 = arg2; -+ entry->arg3 = arg3; -+ entry->next = NULL; -+ } -+ -+ return VLYNQ_SUCCESS; -+} -+ -+ -+ -+/* ---------------------------------------------------------------------------- -+ * Function : vlynq_uninstall_isr -+ * Description: This function is used to uninstall a previously -+ * registered ISR. In case of shared/chained interrupts, the -+ * void * arg parameter must uniquely identify the ISR to be -+ * uninstalled. -+ * Note: this function simply uninstalls the ISR in ICB -+ * It doesnt modify any register settings -+ */ -+int -+vlynq_uninstall_isr(VLYNQ_DEV *pdev, -+ unsigned int map_vector, -+ void *arg1, void *arg2, void *arg3) -+{ -+ VLYNQ_INTR_CNTRL_ICB *entry,*temp; -+ -+ if (map_vector > (VLYNQ_NUM_INT_BITS-1)) -+ return VLYNQ_INVALID_ARG; -+ -+ entry = &(pdev->pIntrCB[map_vector]); -+ -+ if(entry->isr == NULL ) -+ return VLYNQ_ISR_NON_EXISTENT; -+ -+ if ( (entry->arg1 == arg1) && (entry->arg2 == arg2) && (entry->arg3 == arg3) ) -+ { -+ if(entry->next == NULL) -+ { -+ entry->isr=NULL; -+ return VLYNQ_SUCCESS; -+ } -+ else -+ { -+ temp = entry->next; -+ /* Copy next node in the chain to prim.slot */ -+ entry->isr = temp->isr; -+ entry->arg1 = temp->arg1; -+ entry->arg2 = temp->arg2; -+ entry->arg3 = temp->arg3; -+ entry->next = temp->next; -+ /* Free the just copied node */ -+ temp->isr = NULL; -+ temp->arg1 = NULL; -+ temp->arg2 = NULL; -+ temp->arg3 = NULL; -+ temp->next = pdev->freelist; -+ pdev->freelist = temp; -+ return VLYNQ_SUCCESS; -+ } -+ } -+ else -+ { -+ temp = entry; -+ while ( (entry = temp->next) != NULL) -+ { -+ if ( (entry->arg1 == arg1) && (entry->arg2 == arg2) && (entry->arg3 == arg3) ) -+ { -+ /* remove node from chain */ -+ temp->next = entry->next; -+ /* Add the removed node to freelist */ -+ entry->isr = NULL; -+ entry->arg1 = NULL; -+ entry->arg2 = NULL; -+ entry->arg3 = NULL; -+ entry->next = pdev->freelist; -+ entry->isrCount = 0; -+ pdev->freelist = entry; -+ return VLYNQ_SUCCESS; -+ } -+ temp = entry; -+ } -+ -+ return VLYNQ_ISR_NON_EXISTENT; -+ } -+} -+ -+ -+ -+ -+/* ---------------------------------------------------------------------------- -+ * function : vlynq_interrupt_vector_set() -+ * description:configures interrupt vector mapping,interrupt type -+ * polarity -all in one go. -+ */ -+int -+vlynq_interrupt_vector_set(VLYNQ_DEV *pdev, /* vlynq device */ -+ unsigned int int_vector, /* int vector on vlynq device */ -+ unsigned int map_vector, /* bit for this interrupt */ -+ VLYNQ_DEV_TYPE dev_type, /* local or remote device */ -+ VLYNQ_INTR_POLARITY pol, /* polarity of interrupt */ -+ VLYNQ_INTR_TYPE type) /* pulsed/level interrupt */ -+{ -+ volatile unsigned int * vecreg; -+ unsigned int val=0; -+ unsigned int bytemask=0XFF; -+ -+ /* use the lower 8 bits of val to set the value , shift it to -+ * appropriate byte position in the ivr and write it to the -+ * corresponding register */ -+ -+ /* validate the number of interrupts supported */ -+ if (int_vector >= VLYNQ_IVR_MAXIVR) -+ return VLYNQ_INVALID_ARG; -+ -+ if(map_vector > (VLYNQ_NUM_INT_BITS - 1) ) -+ return VLYNQ_INVALID_ARG; -+ -+ if (dev_type == VLYNQ_LOCAL_DVC) -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); -+ } -+ else -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); -+ } -+ -+ /* Update the intVector<==> bit position translation table */ -+ pdev->vector_map[map_vector] = int_vector; -+ -+ /* val has been initialised to zero. we only have to turn on appropriate bits*/ -+ if(type == VLYNQ_INTR_PULSED) -+ val |= VLYNQ_IVR_INTTYPE_MASK; -+ -+ if(pol == VLYNQ_INTR_ACTIVE_LOW) -+ val |= VLYNQ_IVR_INTPOL_MASK; -+ -+ val |= map_vector; -+ -+ /** clear the correct byte position and then or val **/ -+ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) ); -+ -+ /** write to correct byte position in vecreg*/ -+ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ; -+ -+ /* Setting a interrupt vector, leaves the interrupt disabled -+ * which must be enabled subsequently */ -+ -+ return VLYNQ_SUCCESS; -+} -+ -+ -+/* ---------------------------------------------------------------------------- -+ * Function : vlynq_interrupt_vector_cntl() -+ * Description:enables/disable interrupt -+ */ -+int vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev, -+ unsigned int int_vector, -+ VLYNQ_DEV_TYPE dev_type, -+ unsigned int enable) -+{ -+ volatile unsigned int *vecReg; -+ unsigned int val=0; -+ unsigned int intenMask=0x80; -+ -+ /* validate the number of interrupts supported */ -+ if (int_vector >= VLYNQ_IVR_MAXIVR) -+ return VLYNQ_INVALID_ARG; -+ -+ if (dev_type == VLYNQ_LOCAL_DVC) -+ { -+ vecReg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); -+ } -+ else -+ { -+ vecReg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); -+ } -+ -+ /** Clear the correct byte position and then or val **/ -+ *vecReg = (*vecReg) & ( ~(intenMask << ( (int_vector %4)*8) ) ); -+ -+ if(enable) -+ { -+ val |= VLYNQ_IVR_INTEN_MASK; -+ /** Write to correct byte position in vecReg*/ -+ *vecReg = (*vecReg) | (val << ( (int_vector % 4)*8) ) ; -+ } -+ -+ return VLYNQ_SUCCESS; -+ -+}/* end of function vlynq_interrupt_vector_cntl */ -+ -+ -+ -+/* ---------------------------------------------------------------------------- -+ * Function : vlynq_interrupt_vector_map() -+ * Description:Configures interrupt vector mapping alone -+ */ -+int -+vlynq_interrupt_vector_map( VLYNQ_DEV *pdev, -+ VLYNQ_DEV_TYPE dev_type, -+ unsigned int int_vector, -+ unsigned int map_vector) -+{ -+ volatile unsigned int * vecreg; -+ unsigned int val=0; -+ unsigned int bytemask=0x1f; /* mask to turn off bits corresponding to int vector */ -+ -+ /* use the lower 8 bits of val to set the value , shift it to -+ * appropriate byte position in the ivr and write it to the -+ * corresponding register */ -+ -+ /* validate the number of interrupts supported */ -+ if (int_vector >= VLYNQ_IVR_MAXIVR) -+ return VLYNQ_INVALID_ARG; -+ -+ if(map_vector > (VLYNQ_NUM_INT_BITS - 1) ) -+ return VLYNQ_INVALID_ARG; -+ -+ if (dev_type == VLYNQ_LOCAL_DVC) -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); -+ } -+ else -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); -+ } -+ -+ /* Update the intVector<==> bit position translation table */ -+ pdev->vector_map[map_vector] = int_vector; -+ -+ /** val has been initialised to zero. we only have to turn on -+ * appropriate bits*/ -+ val |= map_vector; -+ -+ /** clear the correct byte position and then or val **/ -+ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) ); -+ -+ /** write to correct byte position in vecreg*/ -+ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ; -+ -+ return VLYNQ_SUCCESS; -+} -+ -+ -+/* ---------------------------------------------------------------------------- -+ * function : vlynq_interrupt_set_polarity() -+ * description:configures interrupt polarity . -+ */ -+int -+vlynq_interrupt_set_polarity( VLYNQ_DEV *pdev , -+ VLYNQ_DEV_TYPE dev_type, -+ unsigned int map_vector, -+ VLYNQ_INTR_POLARITY pol) -+{ -+ volatile unsigned int * vecreg; -+ int int_vector; -+ unsigned int val=0; -+ unsigned int bytemask=0x20; /** mask to turn off bits corresponding to int polarity */ -+ -+ /* get the int_vector from map_vector */ -+ int_vector = pdev->vector_map[map_vector]; -+ -+ if(int_vector == -1) -+ return VLYNQ_INTVEC_MAP_NOT_FOUND; -+ -+ /* use the lower 8 bits of val to set the value , shift it to -+ * appropriate byte position in the ivr and write it to the -+ * corresponding register */ -+ -+ if (dev_type == VLYNQ_LOCAL_DVC) -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); -+ } -+ else -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); -+ } -+ -+ /* val has been initialised to zero. we only have to turn on -+ * appropriate bits, if need be*/ -+ -+ /** clear the correct byte position and then or val **/ -+ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) ); -+ -+ if( pol == VLYNQ_INTR_ACTIVE_LOW) -+ { -+ val |= VLYNQ_IVR_INTPOL_MASK; -+ /** write to correct byte position in vecreg*/ -+ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ; -+ } -+ -+ return VLYNQ_SUCCESS; -+} -+ -+int vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev , -+ VLYNQ_DEV_TYPE dev_type, -+ unsigned int map_vector) -+{ -+ volatile unsigned int * vecreg; -+ int int_vector; -+ unsigned int val=0; -+ -+ /* get the int_vector from map_vector */ -+ int_vector = pdev->vector_map[map_vector]; -+ -+ if (map_vector > (VLYNQ_NUM_INT_BITS-1)) -+ return(-1); -+ -+ if(int_vector == -1) -+ return VLYNQ_INTVEC_MAP_NOT_FOUND; -+ -+ /* use the lower 8 bits of val to set the value , shift it to -+ * appropriate byte position in the ivr and write it to the -+ * corresponding register */ -+ -+ if (dev_type == VLYNQ_LOCAL_DVC) -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); -+ } -+ else -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); -+ } -+ -+ /** read the information into val **/ -+ val = (*vecreg) & ((VLYNQ_IVR_INTPOL_MASK << ( (int_vector %4)*8) ) ); -+ -+ return (val ? (VLYNQ_INTR_ACTIVE_LOW) : (VLYNQ_INTR_ACTIVE_HIGH)); -+} -+ -+ -+/* ---------------------------------------------------------------------------- -+ * function : vlynq_interrupt_set_type() -+ * description:configures interrupt type . -+ */ -+int vlynq_interrupt_set_type( VLYNQ_DEV *pdev, -+ VLYNQ_DEV_TYPE dev_type, -+ unsigned int map_vector, -+ VLYNQ_INTR_TYPE type) -+{ -+ volatile unsigned int * vecreg; -+ unsigned int val=0; -+ int int_vector; -+ -+ /** mask to turn off bits corresponding to interrupt type */ -+ unsigned int bytemask=0x40; -+ -+ /* get the int_vector from map_vector */ -+ int_vector = pdev->vector_map[map_vector]; -+ if(int_vector == -1) -+ return VLYNQ_INTVEC_MAP_NOT_FOUND; -+ -+ /* use the lower 8 bits of val to set the value , shift it to -+ * appropriate byte position in the ivr and write it to the -+ * corresponding register */ -+ if (dev_type == VLYNQ_LOCAL_DVC) -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); -+ } -+ else -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); -+ } -+ -+ /** val has been initialised to zero. we only have to turn on -+ * appropriate bits if need be*/ -+ -+ /** clear the correct byte position and then or val **/ -+ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) ); -+ -+ if( type == VLYNQ_INTR_PULSED) -+ { -+ val |= VLYNQ_IVR_INTTYPE_MASK; -+ /** write to correct byte position in vecreg*/ -+ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ; -+ } -+ -+ return VLYNQ_SUCCESS; -+} -+ -+/* ---------------------------------------------------------------------------- -+ * function : vlynq_interrupt_get_type() -+ * description:returns interrupt type . -+ */ -+int vlynq_interrupt_get_type( VLYNQ_DEV *pdev, VLYNQ_DEV_TYPE dev_type, -+ unsigned int map_vector) -+{ -+ volatile unsigned int * vecreg; -+ unsigned int val=0; -+ int int_vector; -+ -+ if (map_vector > (VLYNQ_NUM_INT_BITS-1)) -+ return(-1); -+ -+ /* get the int_vector from map_vector */ -+ int_vector = pdev->vector_map[map_vector]; -+ if(int_vector == -1) -+ return VLYNQ_INTVEC_MAP_NOT_FOUND; -+ -+ /* use the lower 8 bits of val to set the value , shift it to -+ * appropriate byte position in the ivr and write it to the -+ * corresponding register */ -+ if (dev_type == VLYNQ_LOCAL_DVC) -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); -+ } -+ else -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); -+ } -+ -+ /** Read the correct bit position into val **/ -+ val = (*vecreg) & ((VLYNQ_IVR_INTTYPE_MASK << ( (int_vector %4)*8) ) ); -+ -+ return (val ? (VLYNQ_INTR_PULSED) : (VLYNQ_INTR_LEVEL)); -+} -+ -+/* ---------------------------------------------------------------------------- -+ * function : vlynq_interrupt_enable() -+ * description:Enable interrupt by writing to IVR register. -+ */ -+int vlynq_interrupt_enable( VLYNQ_DEV *pdev, -+ VLYNQ_DEV_TYPE dev_type, -+ unsigned int map_vector) -+{ -+ volatile unsigned int * vecreg; -+ unsigned int val=0; -+ int int_vector; -+ -+ /** mask to turn off bits corresponding to interrupt enable */ -+ unsigned int bytemask=0x80; -+ -+ /* get the int_vector from map_vector */ -+ int_vector = pdev->vector_map[map_vector]; -+ if(int_vector == -1) -+ return VLYNQ_INTVEC_MAP_NOT_FOUND; -+ -+ /* use the lower 8 bits of val to set the value , shift it to -+ * appropriate byte position in the ivr and write it to the -+ * corresponding register */ -+ -+ if (dev_type == VLYNQ_LOCAL_DVC) -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); -+ } -+ else -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); -+ } -+ -+ /** val has been initialised to zero. we only have to turn on -+ * bit corresponding to interrupt enable*/ -+ val |= VLYNQ_IVR_INTEN_MASK; -+ -+ /** clear the correct byte position and then or val **/ -+ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) ); -+ -+ /** write to correct byte position in vecreg*/ -+ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ; -+ -+ return VLYNQ_SUCCESS; -+} -+ -+ -+/* ---------------------------------------------------------------------------- -+ * function : vlynq_interrupt_disable() -+ * description:Disable interrupt by writing to IVR register. -+ */ -+int -+vlynq_interrupt_disable( VLYNQ_DEV *pdev, -+ VLYNQ_DEV_TYPE dev_type, -+ unsigned int map_vector) -+{ -+ volatile unsigned int * vecreg; -+ int int_vector; -+ -+ /** mask to turn off bits corresponding to interrupt enable */ -+ unsigned int bytemask=0x80; -+ -+ /* get the int_vector from map_vector */ -+ int_vector = pdev->vector_map[map_vector]; -+ if(int_vector == -1) -+ return VLYNQ_INTVEC_MAP_NOT_FOUND; -+ -+ /* use the lower 8 bits of val to set the value , shift it to -+ * appropriate byte position in the ivr and write it to the -+ * corresponding register */ -+ if (dev_type == VLYNQ_LOCAL_DVC) -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector)); -+ } -+ else -+ { -+ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector)); -+ } -+ -+ /* We disable the interrupt by simply turning off the bit -+ * corresponding to Interrupt enable. -+ * Clear the interrupt enable bit in the correct byte position **/ -+ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) ); -+ -+ /* Dont have to set any bit positions */ -+ -+ return VLYNQ_SUCCESS; -+ -+} -+ -+ -+ -+ -diff -urN linux.old/drivers/char/Config.in linux.dev/drivers/char/Config.in ---- linux.old/drivers/char/Config.in 2005-07-22 06:47:42.777975272 +0200 -+++ linux.dev/drivers/char/Config.in 2005-07-22 06:48:54.359093288 +0200 -@@ -192,6 +192,13 @@ - tristate 'Total Impact briQ front panel driver' CONFIG_BRIQ_PANEL - fi - -+if [ "$CONFIG_AR7" = "y" ]; then -+ bool 'VLYNQ support for the TI SOC' CONFIG_AR7_VLYNQ -+ dep_bool 'VLYNQ clock source Internal' CONFIG_VLYNQ_CLK_LOCAL $CONFIG_AR7_VLYNQ -+ -+ define_int CONFIG_AR7_VLYNQ_PORTS 2 -+fi -+ - source drivers/i2c/Config.in - - mainmenu_option next_comment -diff -urN linux.old/drivers/char/Makefile linux.dev/drivers/char/Makefile ---- linux.old/drivers/char/Makefile 2005-07-22 06:47:35.151134728 +0200 -+++ linux.dev/drivers/char/Makefile 2005-07-22 06:32:53.360187328 +0200 -@@ -191,6 +191,13 @@ - endif - - # -+# Texas Intruments VLYNQ driver -+# -+ -+subdir-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq -+obj-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq/avalanche_vlynq.o -+ -+# - # Texas Intruments LED driver - # - obj-$(CONFIG_AR7_LED) += avalanche_led/avalanche_led.o -diff -urN linux.old/include/asm-mips/ar7/vlynq.h linux.dev/include/asm-mips/ar7/vlynq.h ---- linux.old/include/asm-mips/ar7/vlynq.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/ar7/vlynq.h 2005-07-22 06:32:53.361187176 +0200 -@@ -0,0 +1,610 @@ -+/*************************************************************************** -+**+----------------------------------------------------------------------+** -+**| **** |** -+**| **** |** -+**| ******o*** |** -+**| ********_///_**** |** -+**| ***** /_//_/ **** |** -+**| ** ** (__/ **** |** -+**| ********* |** -+**| **** |** -+**| *** |** -+**| |** -+**| Copyright (c) 2003 Texas Instruments Incorporated |** -+**| ALL RIGHTS RESERVED |** -+**| |** -+**| Permission is hereby granted to licensees of Texas Instruments |** -+**| Incorporated (TI) products to use this computer program for the sole |** -+**| purpose of implementing a licensee product based on TI products. |** -+**| No other rights to reproduce, use, or disseminate this computer |** -+**| program, whether in part or in whole, are granted. |** -+**| |** -+**| TI makes no representation or warranties with respect to the |** -+**| performance of this computer program, and specifically disclaims |** -+**| any responsibility for any damages, special or consequential, |** -+**| connected with the use of this program. |** -+**| |** -+**+----------------------------------------------------------------------+** -+***************************************************************************/ -+ -+/********************************************************************************* -+ * ------------------------------------------------------------------------------ -+ * Module : vlynq_hal.h -+ * Description : -+ * This header file provides the set of functions exported by the -+ * VLYNQ HAL. This file is included from the SOC specific VLYNQ driver wrapper. -+ * ------------------------------------------------------------------------------ -+ *********************************************************************************/ -+ -+#ifndef _VLYNQ_HAL_H_ -+#define _VLYNQ_HAL_H_ -+ -+/* Enable/Disable debug feature */ -+#undef VLYNQ_DEBUG -+ -+#ifdef VLYNQ_DEBUG /* This needs to be OS abstracted - for testing use vxworks/linux calls */ -+#define debugPrint(format,args...) -+#else -+#define debugPrint(format,args...) -+#endif -+ -+ /* number of VLYNQ memory regions supported */ -+#define VLYNQ_MAX_MEMORY_REGIONS 0x04 -+ -+ /* Max.number of external interrupt inputs supported by VLYNQ module */ -+#define VLYNQ_IVR_MAXIVR 0x08 -+ -+#define VLYNQ_CLK_DIV_MAX 0x08 -+#define VLYNQ_CLK_DIV_MIN 0x01 -+ -+ -+/*** the total number of entries allocated for ICB would be -+ * 32(for 32 bits in IntPending register) + VLYNQ_IVR_CHAIN_SLOTS*/ -+#define VLYNQ_IVR_CHAIN_SLOTS 10 -+ -+ -+/* Error defines */ -+#define VLYNQ_SUCCESS 0 -+ -+#define VLYNQ_ERRCODE_BASE 0 /* Chosen by system */ -+#define VLYNQ_INVALID_ARG -(VLYNQ_ERRCODE_BASE+1) -+#define VLYNQ_INVALID_DRV_STATE -(VLYNQ_ERRCODE_BASE+2) -+#define VLYNQ_INT_CONFIG_ERR -(VLYNQ_ERRCODE_BASE+3) -+#define VLYNQ_LINK_DOWN -(VLYNQ_ERRCODE_BASE+4) -+#define VLYNQ_MEMALLOC_FAIL -(VLYNQ_ERRCODE_BASE+5) -+#define VLYNQ_ISR_NON_EXISTENT -(VLYNQ_ERRCODE_BASE+6) -+#define VLYNQ_INTVEC_MAP_NOT_FOUND -(VLYNQ_ERRCODE_BASE+7) -+ -+/* Vlynq Defines and Macros */ -+ -+#define VLYNQ_NUM_INT_BITS 32 /* 32 bit interrupt staus register */ -+ -+/* Base address of module */ -+#define VLYNQ_BASE (pdev->module_base) -+ -+#define VLYNQ_REMOTE_REGS_OFFSET 0x0080 -+ -+#define VLYNQ_REV_OFFSET 0x0000 -+#define VLYNQ_CTRL_OFFSET 0x0004 -+#define VLYNQ_STATUS_OFFSET 0x0008 -+#define VLYNQ_INT_STAT_OFFSET 0x0010 -+#define VLYNQ_INT_PEND_OFFSET 0x0014 -+#define VLYNQ_INT_PTR_OFFSET 0x0018 -+#define VLYNQ_TXMAP_OFFSET 0x001c -+ -+#define VLYNQ_RX0MAP_SIZE_REG_OFFSET 0x0020 -+#define VLYNQ_RX0MAP_OFFSET_REG_OFFSET 0x0024 -+ -+#define VLYNQ_CHIP_VER_OFFSET 0x0040 -+#define VLYNQ_IVR_REGS_OFFSET 0x0060 -+ -+#define VLYNQ_INT_PENDING_REG_PTR 0x14 -+#define VLYNQ_R_INT_PENDING_REG_PTR VLYNQ_REMOTE_REGS_OFFSET + 0x14 -+ -+#define VLYNQ_REV_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_REV_OFFSET)) -+#define VLYNQ_CTRL_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_CTRL_OFFSET)) -+#define VLYNQ_STATUS_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_STATUS_OFFSET)) -+#define VLYNQ_INT_STAT_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_STAT_OFFSET)) -+#define VLYNQ_INT_PEND_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_PEND_OFFSET)) -+#define VLYNQ_INT_PTR_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_PTR_OFFSET)) -+#define VLYNQ_TXMAP_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_TXMAP_OFFSET)) -+ -+/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/ -+#define VLYNQ_RXMAP_SIZE_REG(map) \ -+ *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_RX0MAP_SIZE_REG_OFFSET+( (map-1)<<3))) -+ -+/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/ -+#define VLYNQ_RXMAP_OFFSET_REG(map) \ -+ *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_RX0MAP_OFFSET_REG_OFFSET+( (map-1)<<3))) -+ -+#define VLYNQ_CHIP_VER_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_CHIP_VER_OFFSET)) -+ -+/* 0 =< ivr <= 31; currently ivr < VLYNQ_IVR_MAXIVR=8) */ -+#define VLYNQ_IVR_OFFSET(ivr) \ -+ (VLYNQ_BASE + VLYNQ_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3) ) -+ -+#define VLYNQ_IVR_03TO00_REG *((volatile unsigned int*) (VLYNQ_IVR_OFFSET(0)) ) -+#define VLYNQ_IVR_07TO04_REG *((volatile unsigned int*) (VLYNQ_IVR_OFFSET(4)) ) -+/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/ -+ -+#define VLYNQ_IVR_INTEN(ivr) (((unsigned int)(0x80)) << ((((unsigned)(ivr)) % 4) * 8)) -+#define VLYNQ_IVR_INTTYPE(ivr) (((unsigned int)(0x40)) << ((((unsigned)(ivr)) % 4) * 8)) -+#define VLYNQ_IVR_INTPOL(ivr) (((unsigned int)(0x20)) << ((((unsigned)(ivr)) % 4) * 8)) -+#define VLYNQ_IVR_INTVEC(ivr) (((unsigned int)(0x1F)) << ((((unsigned)(ivr)) % 4) * 8)) -+#define VLYNQ_IVR_INTALL(ivr) (((unsigned int)(0xFF)) << ((((unsigned)(ivr)) % 4) * 8)) -+ -+ -+ -+/********************************* -+ * Remote VLYNQ register set * -+ *********************************/ -+ -+#define VLYNQ_R_REV_OFFSET 0x0080 -+#define VLYNQ_R_CTRL_OFFSET 0x0084 -+#define VLYNQ_R_STATUS_OFFSET 0x0088 -+#define VLYNQ_R_INT_STAT_OFFSET 0x0090 -+#define VLYNQ_R_INT_PEND_OFFSET 0x0094 -+#define VLYNQ_R_INT_PTR_OFFSET 0x0098 -+#define VLYNQ_R_TXMAP_OFFSET 0x009c -+ -+#define VLYNQ_R_RX0MAP_SIZE_REG_OFFSET 0x00A0 -+#define VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET 0x00A4 -+ -+#define VLYNQ_R_CHIP_VER_OFFSET 0x00C0 -+#define VLYNQ_R_IVR_REGS_OFFSET 0x00E0 -+ -+#define VLYNQ_R_REV_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_REV_OFFSET)) -+#define VLYNQ_R_CTRL_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_CTRL_OFFSET)) -+#define VLYNQ_R_STATUS_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_STATUS_OFFSET)) -+#define VLYNQ_R_INT_STAT_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_STAT_OFFSET)) -+#define VLYNQ_R_INT_PEND_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_PEND_OFFSET)) -+#define VLYNQ_R_INT_PTR_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_PTR_OFFSET)) -+#define VLYNQ_R_TXMAP_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_TXMAP_OFFSET)) -+ -+/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/ -+#define VLYNQ_R_RXMAP_SIZE_REG(map) \ -+ *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_SIZE_REG_OFFSET + ((map-1)<<3))) -+ -+/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/ -+#define VLYNQ_R_RXMAP_OFFSET_REG(map) \ -+ *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET + ((map-1)<<3))) -+ -+#define VLYNQ_R_CHIP_VER_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_CHIP_VER_OFFSET) -+ -+#define VLYNQ_R_IVR_OFFSET(ivr) \ -+ (VLYNQ_BASE + VLYNQ_R_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3)) -+ -+ -+/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/ -+#define VLYNQ_R_IVR_03TO00_REG *((volatile unsigned int*) (VLYNQ_R_IVR_OFFSET(0)) ) -+#define VLYNQ_R_IVR_07TO04_REG *((volatile unsigned int*) (VLYNQ_R_IVR_OFFSET(4)) ) -+ -+ -+/****End of remote register set definition******/ -+ -+ -+/*** Masks for individual register fields ***/ -+ -+#define VLYNQ_MODULE_ID_MASK 0xffff0000 -+#define VLYNQ_MAJOR_REV_MASK 0x0000ff00 -+#define VLYNQ_MINOR_REV_MASK 0x000000ff -+ -+ -+#define VLYNQ_CTL_ILOOP_MASK 0x00000002 -+#define VLYNQ_CTL_INT2CFG_MASK 0x00000080 -+#define VLYNQ_CTL_INTVEC_MASK 0x00001f00 -+#define VLYNQ_CTL_INTEN_MASK 0x00002000 -+#define VLYNQ_CTL_INTLOCAL_MASK 0x00004000 -+#define VLYNQ_CTL_CLKDIR_MASK 0x00008000 -+#define VLYNQ_CTL_CLKDIV_MASK 0x00070000 -+#define VLYNQ_CTL_MODE_MASK 0x00e00000 -+ -+ -+#define VLYNQ_STS_LINK_MASK 0x00000001 /* Link is active */ -+#define VLYNQ_STS_MPEND_MASK 0x00000002 /* Pending master requests */ -+#define VLYNQ_STS_SPEND_MASK 0x00000004 /* Pending slave requests */ -+#define VLYNQ_STS_NFEMPTY0_MASK 0x00000008 /* Master data FIFO not empty */ -+#define VLYNQ_STS_NFEMPTY1_MASK 0x00000010 /* Master command FIFO not empty */ -+#define VLYNQ_STS_NFEMPTY2_MASK 0x00000020 /* Slave data FIFO not empty */ -+#define VLYNQ_STS_NFEMPTY3_MASK 0x00000040 /* Slave command FIFO not empty */ -+#define VLYNQ_STS_LERROR_MASK 0x00000080 /* Local error, w/c */ -+#define VLYNQ_STS_RERROR_MASK 0x00000100 /* remote error w/c */ -+#define VLYNQ_STS_OFLOW_MASK 0x00000200 -+#define VLYNQ_STS_IFLOW_MASK 0x00000400 -+#define VLYNQ_STS_MODESUP_MASK 0x00E00000 /* Highest mode supported */ -+#define VLYNQ_STS_SWIDTH_MASK 0x07000000 /* Used for reading the width of VLYNQ bus */ -+#define VLYNQ_STS_DEBUG_MASK 0xE0000000 -+ -+#define VLYNQ_CTL_INTVEC_SHIFT 0x08 -+#define VLYNQ_CTL_INTEN_SHIFT 0x0D -+#define VLYNQ_CTL_INT2CFG_SHIFT 0x07 -+#define VLYNQ_CTL_INTLOCAL_SHIFT 0x0E -+ -+#define VLYNQ_CTL_INTFIELDS_CLEAR_MASK 0x7F80 -+ -+#define VLYNQ_CHIPVER_DEVREV_MASK 0xffff0000 -+#define VLYNQ_CHIPVER_DEVID_MASK 0x0000ffff -+ -+#define VLYNQ_IVR_INTEN_MASK 0x80 -+#define VLYNQ_IVR_INTTYPE_MASK 0x40 -+#define VLYNQ_IVR_INTPOL_MASK 0x20 -+ -+ -+/**** Helper macros ****/ -+ -+#define VLYNQ_RESETCB(arg) \ -+ if( pdev->reset_cb != NULL) \ -+ { \ -+ (pdev->reset_cb)(pdev, (arg)); \ -+ } -+ -+#define VLYNQ_STATUS_FLD_WIDTH(sts) (((sts) & VLYNQ_STS_SWIDTH_MASK) >> 24 ) -+#define VLYNQ_CTL_INTVEC(x) (((x) & 31) << 8 ) -+ -+#define VLYNQ_INRANGE(x,hi,lo) (((x) <= (hi)) && ((x) >= (lo))) -+#define VLYNQ_OUTRANGE(x,hi,lo) (((x) > (hi)) || ((x) < (lo))) -+ -+#define VLYNQ_ALIGN4(x) (x)=(x)&(~3) -+ -+ -+/************************************* -+ * Enums * -+ *************************************/ -+ -+/* Initialization options define what operations are -+ * undertaken during vlynq module initialization */ -+typedef enum -+{ -+ /* Init host local memory regions.This allows -+ * local host access remote memory regions */ -+ VLYNQ_INIT_LOCAL_MEM_REGIONS = 0x01, -+ /* Init host remote memory regions.This allows -+ * remote device access local memory regions */ -+ VLYNQ_INIT_REMOTE_MEM_REGIONS =0x02, -+ /* Init local interrupt config*/ -+ VLYNQ_INIT_LOCAL_INTERRUPTS =0x04, -+ /* Init remote interrupt config*/ -+ VLYNQ_INIT_REMOTE_INTERRUPTS =0x08, -+ /* Check link during initialization*/ -+ VLYNQ_INIT_CHECK_LINK =0x10, -+ /* configure clock during init */ -+ VLYNQ_INIT_CONFIG_CLOCK =0x20, -+ /* Clear errors during init */ -+ VLYNQ_INIT_CLEAR_ERRORS =0x40, -+ /* All options */ -+ VLYNQ_INIT_PERFORM_ALL =0x7F -+}VLYNQ_INIT_OPTIONS; -+ -+ -+/* VLYNQ_DEV_TYPE identifies local or remote device */ -+typedef enum -+{ -+ VLYNQ_LOCAL_DVC = 0, /* vlynq local device (SOC's vlynq module) */ -+ VLYNQ_REMOTE_DVC = 1 /* vlynq remote device (remote vlynq module) */ -+}VLYNQ_DEV_TYPE; -+ -+ -+/* VLYNQ_CLK_SOURCE identifies the vlynq module clock source */ -+typedef enum -+{ -+ VLYNQ_CLK_SOURCE_NONE = 0, /* do not initialize clock generator*/ -+ VLYNQ_CLK_SOURCE_LOCAL = 1, /* clock is generated by local machine */ -+ VLYNQ_CLK_SOURCE_REMOTE = 2 /* clock is generated by remote machine */ -+}VLYNQ_CLK_SOURCE; -+ -+ -+/* VLYNQ_DRV_STATE indicates the current driver state */ -+typedef enum -+{ -+ VLYNQ_DRV_STATE_UNINIT = 0, /* driver is uninitialized */ -+ VLYNQ_DRV_STATE_ININIT = 1, /* VLYNQ is being initialized */ -+ VLYNQ_DRV_STATE_RUN = 2, /* VLYNQ is running properly */ -+ VLYNQ_DRV_STATE_HOLD = 3, /* driver stopped temporarily */ -+ VLYNQ_DRV_STATE_ERROR = 4 /* driver stopped on unrecoverable error */ -+}VLYNQ_DRV_STATE; -+ -+ -+/* VLYNQ_BUS_WIDTH identifies the vlynq module bus width */ -+typedef enum -+{ -+ VLYNQ_BUS_WIDTH_3 = 3, -+ VLYNQ_BUS_WIDTH_5 = 5, -+ VLYNQ_BUS_WIDTH_7 = 7, -+ VLYNQ_BUS_WIDTH_9 = 9 -+}VLYNQ_BUS_WIDTH; -+ -+ -+/* VLYNQ_LOCAL_INT_CONFIG indicates whether the local vlynq -+ * interrupts are processed by the host or passed on to the -+ * remote device. -+ */ -+typedef enum -+{ -+ VLYNQ_INT_REMOTE = 0, /* Interrupt packets sent to remote, intlocal=0 */ -+ VLYNQ_INT_LOCAL = 1 /* Interrupts are handled locally, intlocal=1 */ -+}VLYNQ_LOCAL_INT_CONFIG; -+ -+ -+/* VLYNQ_REMOTE_INT_CONFIG indicates whether the remote -+ * interrupts are to be handled by the SOC system ISR -+ * or via the vlynq root ISR -+ */ -+typedef enum -+{ -+ VLYNQ_INT_ROOT_ISR = 0, /* remote ints handled via vlynq root ISR */ -+ VLYNQ_INT_SYSTEM_ISR = 1 /* remote ints handled via system ISR */ -+}VLYNQ_REMOTE_INT_CONFIG; -+ -+ -+/* VLYNQ_INTR_POLARITY - vlynq interrupt polarity setting */ -+typedef enum -+{ -+ VLYNQ_INTR_ACTIVE_HIGH = 0, -+ VLYNQ_INTR_ACTIVE_LOW = 1 -+}VLYNQ_INTR_POLARITY; -+ -+ -+/* VLYNQ_INTR_TYPE - vlynq interrupt type */ -+typedef enum -+{ -+ VLYNQ_INTR_LEVEL = 0, -+ VLYNQ_INTR_PULSED = 1 -+}VLYNQ_INTR_TYPE; -+ -+ -+/* VLYNQ_RESET_MODE - vlynq reset mode */ -+typedef enum -+{ -+ VLYNQ_RESET_ASSERT, /* hold device in reset state */ -+ VLYNQ_RESET_DEASSERT, /* release device from reset state */ -+ VLYNQ_RESET_INITFAIL, /* handle the device in case driver initialization fails */ -+ VLYNQ_RESET_LINKESTABLISH, /* handle the device in case driver established link */ -+ VLYNQ_RESET_INITFAIL2, /* Driver initialization failed but VLYNQ link exist. */ -+ VLYNQ_RESET_INITOK /* Driver initialization finished OK. */ -+}VLYNQ_RESET_MODE; -+ -+ -+ -+/************************************* -+ * Typedefs * -+ *************************************/ -+ -+struct VLYNQ_DEV_t; /*forward declaration*/ -+ -+/*--------Function Pointers defintions -----------*/ -+ -+/* prototype for interrupt handler definition */ -+typedef void (*VLYNQ_INTR_CNTRL_ISR)(void *arg1,void *arg2,void *arg3); -+ -+typedef void -+(*VLYNQ_RESET_REMOTE)(struct VLYNQ_DEV_t *pDev, VLYNQ_RESET_MODE mode); -+ -+typedef void -+(*VLYNQ_REPORT_CB)( struct VLYNQ_DEV_t *pDev, /* This VLYNQ */ -+ VLYNQ_DEV_TYPE aSrcDvc, /* Event Cause -local/remote? */ -+ unsigned int dwStatRegVal); /* Value of the relevant status register */ -+ -+ -+/*-------Structure Definitions------------*/ -+ -+typedef struct VLYNQ_MEMORY_MAP_t -+{ -+ unsigned int Txmap; -+ unsigned int RxOffset[VLYNQ_MAX_MEMORY_REGIONS]; -+ unsigned int RxSize[VLYNQ_MAX_MEMORY_REGIONS]; -+}VLYNQ_MEMORY_MAP; -+ -+ -+/**VLYNQ_INTERRUPT_CNTRL - defines the vlynq module interrupt -+ * settings in vlynq Control register */ -+typedef struct VLYNQ_INTERRUPT_CNTRL_t -+{ -+ /* vlynq interrupts handled by host or remote - maps to -+ * intLocal bit in vlynq control register */ -+ VLYNQ_LOCAL_INT_CONFIG intLocal; -+ -+ /* remote interrupts handled by vlynq isr or host system -+ * interrupt controller - maps to the int2Cfg in vlynq -+ * control register */ -+ VLYNQ_REMOTE_INT_CONFIG intRemote; -+ -+ /* bit in pending/set register used for module interrupts*/ -+ unsigned int map_vector; -+ -+ /* used only if remote interrupts are to be handled by system ISR*/ -+ unsigned int intr_ptr; -+ -+}VLYNQ_INTERRUPT_CNTRL; -+ -+ -+/* VLYNQ_INTR_CNTRL_ICB - defines the Interrupt control block which hold -+ * the interrupt dispatch table. The vlynq_root_isr() indexes into this -+ * table to identify the ISR to be invoked -+ */ -+typedef struct VLYNQ_INTR_CNTRL_ICB_t -+{ -+ VLYNQ_INTR_CNTRL_ISR isr; /* Clear errors during initialization */ -+ void *arg1 ; /* Arg 1 for the ISR */ -+ void *arg2 ; /* Arg 2 for the ISR */ -+ void *arg3 ; /* Arg 3 for the ISR */ -+ unsigned int isrCount; /* number of ISR invocations so far */ -+ struct VLYNQ_INTR_CNTRL_ICB_t *next; -+}VLYNQ_INTR_CNTRL_ICB; -+ -+/* overlay of vlynq register set */ -+typedef struct VLYNQ_REG_SET_t -+{ -+ unsigned int revision; /*offset : 0x00 */ -+ unsigned int control; /* 0x04*/ -+ unsigned int status; /* 0x08*/ -+ unsigned int pad1; /* 0x0c*/ -+ unsigned int intStatus; /*0x10*/ -+ unsigned int intPending; /*0x14*/ -+ unsigned int intPtr; /*0x18*/ -+ unsigned int txMap; /*0x1C*/ -+ unsigned int rxSize1; /*0x20*/ -+ unsigned int rxOffset1; /*0x24*/ -+ unsigned int rxSize2; /*0x28*/ -+ unsigned int rxOffset2; /*0x2C*/ -+ unsigned int rxSize3; /*0x30*/ -+ unsigned int rxOffset3; /*0x34*/ -+ unsigned int rxSize4; /*0x38*/ -+ unsigned int rxOffset4; /*0x3C*/ -+ unsigned int chipVersion; /*0x40*/ -+ unsigned int pad2[8]; -+ unsigned int ivr30; /*0x60*/ -+ unsigned int ivr74; /*0x64*/ -+ unsigned int pad3[7]; -+}VLYNQ_REG_SET; -+ -+ -+typedef struct VLYNQ_DEV_t -+{ -+ /** module index:1,2,3... used for debugging purposes */ -+ unsigned int dev_idx; -+ -+ /*VLYNQ module base address */ -+ unsigned int module_base; -+ -+ /* clock source selection */ -+ VLYNQ_CLK_SOURCE clk_source; -+ -+ /* Clock Divider.Val=1 to 8. VLYNQ_clk = VBUSCLK/clk_div */ -+ unsigned int clk_div; -+ -+ /* State of the VLYNQ driver, set to VLYNQ_DRV_STATE_UNINIT, when initializing */ -+ VLYNQ_DRV_STATE state; -+ -+ /* Valid VLYNQ bus width, filled by driver */ -+ VLYNQ_BUS_WIDTH width; -+ -+ /* local memory mapping */ -+ VLYNQ_MEMORY_MAP local_mem; -+ -+ /* remote memory mapping */ -+ VLYNQ_MEMORY_MAP remote_mem; -+ -+ /* Local module interrupt params */ -+ VLYNQ_INTERRUPT_CNTRL local_irq; -+ -+ /* remote module interrupt params */ -+ VLYNQ_INTERRUPT_CNTRL remote_irq; -+ -+ /*** ICB related fields **/ -+ -+ /* Sizeof of ICB = VLYNQ_NUM_INT_BITS(for 32 bits in IntPending) + -+ * expansion slots for shared interrupts*/ -+ VLYNQ_INTR_CNTRL_ICB pIntrCB[VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS]; -+ VLYNQ_INTR_CNTRL_ICB *freelist; -+ -+ /* table holding mapping between intVector and the bit position the interrupt -+ * is mapped to(mapVector)*/ -+ char vector_map[32]; -+ -+ /* user callback for vlynq events, NULL if unused */ -+ VLYNQ_REPORT_CB report_cb; -+ -+ /* user callback for resetting/realeasing remote device */ -+ VLYNQ_RESET_REMOTE reset_cb; -+ -+ /*** Handles provided for direct access to register set if need be -+ * Must be intialized to point to appropriate address during -+ * vlynq_init */ -+ volatile VLYNQ_REG_SET * local; -+ volatile VLYNQ_REG_SET * remote; -+ -+ unsigned int intCount; /* number of interrupts generated so far */ -+ unsigned int isrCount; /* number of ISR invocations so far */ -+}VLYNQ_DEV; -+ -+ -+typedef struct VLYNQ_ISR_ARGS_t -+{ -+ int irq; -+ void * arg; -+ void * regset; -+}VLYNQ_ISR_ARGS; -+ -+ -+/**************************************** -+ * Function Prototypes * -+ * API exported by generic vlynq driver * -+ ****************************************/ -+/* Initialization function */ -+int vlynq_init( VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options); -+ -+/* Check vlynq link */ -+unsigned int vlynq_link_check( VLYNQ_DEV * pdev); -+ -+/* Set interrupt vector in local or remote device */ -+int vlynq_interrupt_vector_set( VLYNQ_DEV *pdev, -+ unsigned int int_vector, -+ unsigned int map_vector, -+ VLYNQ_DEV_TYPE dev, -+ VLYNQ_INTR_POLARITY pol, -+ VLYNQ_INTR_TYPE type); -+ -+ -+int vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev, -+ unsigned int int_vector, -+ VLYNQ_DEV_TYPE dev, -+ unsigned int enable); -+ -+unsigned int vlynq_interrupt_get_count( VLYNQ_DEV *pdev, -+ unsigned int map_vector); -+ -+int vlynq_install_isr( VLYNQ_DEV *pdev, -+ unsigned int map_vector, -+ VLYNQ_INTR_CNTRL_ISR isr, -+ void *arg1, void *arg2, void *arg3); -+ -+int vlynq_uninstall_isr( VLYNQ_DEV *pdev, -+ unsigned int map_vector, -+ void *arg1, void *arg2, void *arg3); -+ -+ -+void vlynq_root_isr(void *arg); -+ -+void vlynq_delay(unsigned int clktime); -+ -+/* The following functions, provide better granularity in setting -+ * interrupt parameters. (for better support of linux INT Controller) -+ * Note: The interrupt source is identified by "map_vector"- the bit -+ * position in interrupt status register*/ -+ -+int vlynq_interrupt_vector_map(VLYNQ_DEV * pdev, -+ VLYNQ_DEV_TYPE dev, -+ unsigned int int_vector, -+ unsigned int map_vector); -+ -+int vlynq_interrupt_set_polarity(VLYNQ_DEV * pdev, -+ VLYNQ_DEV_TYPE dev, -+ unsigned int map_vector, -+ VLYNQ_INTR_POLARITY pol); -+ -+int vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev , -+ VLYNQ_DEV_TYPE dev_type, -+ unsigned int map_vector); -+ -+int vlynq_interrupt_set_type(VLYNQ_DEV * pdev, -+ VLYNQ_DEV_TYPE dev, -+ unsigned int map_vector, -+ VLYNQ_INTR_TYPE type); -+ -+int vlynq_interrupt_get_type( VLYNQ_DEV *pdev, -+ VLYNQ_DEV_TYPE dev_type, -+ unsigned int map_vector); -+ -+int vlynq_interrupt_enable(VLYNQ_DEV* pdev, -+ VLYNQ_DEV_TYPE dev, -+ unsigned int map_vector); -+ -+int vlynq_interrupt_disable(VLYNQ_DEV * pdev, -+ VLYNQ_DEV_TYPE dev, -+ unsigned int map_vector); -+ -+ -+ -+ -+ -+#endif /* _VLYNQ_HAL_H_ */