Openwrt/target/linux/rb532-2.6/files/drivers/mtd/nand/rbmipsnand.c

138 lines
3.0 KiB
C
Raw Normal View History

#include <linux/init.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/bootinfo.h>
#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(0x18000000))
#define GPIOF 0x050000
#define GPIOC 0x050004
#define GPIOD 0x050008
#define GPIO_RDY (1 << 0x08)
#define GPIO_WPX (1 << 0x09)
#define GPIO_ALE (1 << 0x0a)
#define GPIO_CLE (1 << 0x0b)
#define DEV2BASE 0x010020
#define LO_WPX (1 << 0)
#define LO_ALE (1 << 1)
#define LO_CLE (1 << 2)
#define LO_CEX (1 << 3)
#define LO_FOFF (1 << 5)
#define LO_SPICS (1 << 6)
#define LO_ULED (1 << 7)
#define MEM32(x) *((volatile unsigned *) (x))
static void __iomem *p_nand;
extern void changeLatchU5(unsigned char orMask, unsigned char nandMask);
static int rb500_dev_ready(struct mtd_info *mtd)
{
return MEM32(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
}
/*
* hardware specific access to control-lines
*
* ctrl:
* NAND_CLE: bit 2 -> bit 3
* NAND_ALE: bit 3 -> bit 2
*/
static void rbmips_hwcontrol500(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
struct nand_chip *chip = mtd->priv;
unsigned char orbits, nandbits;
if (ctrl & NAND_CTRL_CHANGE) {
orbits = (ctrl & NAND_CLE) << 1;
orbits |= (ctrl & NAND_ALE) >> 1;
nandbits = (~ctrl & NAND_CLE) << 1;
nandbits |= (~ctrl & NAND_ALE) >> 1;
changeLatchU5(orbits, nandbits);
}
if (cmd != NAND_CMD_NONE)
writeb(cmd, chip->IO_ADDR_W);
}
static struct mtd_partition partition_info[] = {
{
name:"RouterBoard NAND Boot",
offset:0,
size:4 * 1024 * 1024},
{
name:"RouterBoard NAND Main",
offset:MTDPART_OFS_NXTBLK,
size:MTDPART_SIZ_FULL}
};
static struct mtd_info rmtd;
static struct nand_chip rnand;
static unsigned init_ok = 0;
unsigned get_rbnand_block_size(void)
{
if (init_ok)
return rmtd.writesize;
else
return 0;
}
EXPORT_SYMBOL(get_rbnand_block_size);
int __init rbmips_init(void)
{
int *b;
memset(&rmtd, 0, sizeof(rmtd));
memset(&rnand, 0, sizeof(rnand));
printk("RB500 nand\n");
changeLatchU5(LO_FOFF | LO_CEX,
LO_ULED | LO_ALE | LO_CLE | LO_WPX);
rnand.cmd_ctrl = rbmips_hwcontrol500;
rnand.dev_ready = rb500_dev_ready;
rnand.IO_ADDR_W = (unsigned char *)
KSEG1ADDR(MEM32(IDT434_REG_BASE + DEV2BASE));
rnand.IO_ADDR_R = rnand.IO_ADDR_W;
p_nand = (void __iomem *) ioremap((void *) 0x18a20000, 0x1000);
if (!p_nand) {
printk("RBnand Unable ioremap buffer");
return -ENXIO;
}
rnand.ecc.mode = NAND_ECC_SOFT;
rnand.chip_delay = 25;
rnand.options |= NAND_NO_AUTOINCR;
rmtd.priv = &rnand;
b = (int *) KSEG1ADDR(0x18010020);
printk("dev2base 0x%08x mask 0x%08x c 0x%08x tc 0x%08x\n", b[0],
b[1], b[2], b[3]);
if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)
&& nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) {
printk("RBxxx nand device not found\n");
iounmap((void *) p_nand);
return -ENXIO;
}
add_mtd_partitions(&rmtd, partition_info, 2);
init_ok = 1;
return 0;
}
module_init(rbmips_init);