EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
f8c98ee6c2
Openwrt/target/linux/bcm27xx/patches-5.4/950-0867-ARM-dts-Make-bcm2711-dts-more-like-5.7.patch

697 lines
16 KiB
Diff
Raw Normal View History

bcm27xx: import latest patches from the RPi foundation bcm2708: boot tested on RPi B+ v1.2 bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G bcm2710: boot tested on RPi 3B v1.2 bcm2711: boot tested on RPi 4B v1.1 4G Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-02-18 17:04:33 +00:00
From 0f02c32b2d27fa5f0b21c67fb5518a36b5234f3a Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Tue, 7 Jul 2020 09:01:54 +0100
Subject: [PATCH] ARM: dts: Make bcm2711 dts more like 5.7
The multiple declarations of pixelvalve2 were causing problems for the
DT checkers. Aligning the dts files closer to the later kernel versions
avoids some repetition and should make maintenance easier.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 142 ++++++++++++-----------
arch/arm/boot/dts/bcm2711-rpi-cm4.dts | 69 +----------
arch/arm/boot/dts/bcm2711-rpi.dtsi | 150 +++++++++++++++++++++++-
arch/arm/boot/dts/bcm2711.dtsi | 157 +++-----------------------
4 files changed, 245 insertions(+), 273 deletions(-)
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -19,7 +19,9 @@
};
aliases {
+ emmc2bus = &emmc2bus;
ethernet0 = &genet;
+ pcie0 = &pcie0;
};
leds {
@@ -30,6 +32,8 @@
pwr {
label = "PWR";
gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ linux,default-trigger = "default-on";
};
};
@@ -70,6 +74,79 @@
};
};
+&gpio {
+ /*
+ * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
+ * the official GPU firmware DT blob.
+ *
+ * Legend:
+ * "FOO" = GPIO line named "FOO" on the schematic
+ * "FOO_N" = GPIO line named "FOO" on schematic, active low
+ */
+ gpio-line-names = "ID_SDA",
+ "ID_SCL",
+ "SDA1",
+ "SCL1",
+ "GPIO_GCLK",
+ "GPIO5",
+ "GPIO6",
+ "SPI_CE1_N",
+ "SPI_CE0_N",
+ "SPI_MISO",
+ "SPI_MOSI",
+ "SPI_SCLK",
+ "GPIO12",
+ "GPIO13",
+ /* Serial port */
+ "TXD1",
+ "RXD1",
+ "GPIO16",
+ "GPIO17",
+ "GPIO18",
+ "GPIO19",
+ "GPIO20",
+ "GPIO21",
+ "GPIO22",
+ "GPIO23",
+ "GPIO24",
+ "GPIO25",
+ "GPIO26",
+ "GPIO27",
+ "RGMII_MDIO",
+ "RGMIO_MDC",
+ /* Used by BT module */
+ "CTS0",
+ "RTS0",
+ "TXD0",
+ "RXD0",
+ /* Used by Wifi */
+ "SD1_CLK",
+ "SD1_CMD",
+ "SD1_DATA0",
+ "SD1_DATA1",
+ "SD1_DATA2",
+ "SD1_DATA3",
+ /* Shared with SPI flash */
+ "PWM0_MISO",
+ "PWM1_MOSI",
+ "STATUS_LED_G_CLK",
+ "SPIFLASH_CE_N",
+ "SDA0",
+ "SCL0",
+ "RGMII_RXCLK",
+ "RGMII_RXCTL",
+ "RGMII_RXD0",
+ "RGMII_RXD1",
+ "RGMII_RXD2",
+ "RGMII_RXD3",
+ "RGMII_TXCLK",
+ "RGMII_TXCTL",
+ "RGMII_TXD0",
+ "RGMII_TXD1",
+ "RGMII_TXD2",
+ "RGMII_TXD3";
+};
+
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
@@ -138,46 +215,6 @@
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
};
-&vc4 {
- status = "okay";
-};
-
-&pixelvalve0 {
- status = "okay";
-};
-
-&pixelvalve1 {
- status = "okay";
-};
-
-&pixelvalve2 {
- status = "okay";
-};
-
-&pixelvalve3 {
- status = "okay";
-};
-
-&pixelvalve4 {
- status = "okay";
-};
-
-&hdmi0 {
- status = "okay";
-};
-
-&ddc0 {
- status = "okay";
-};
-
-&hdmi1 {
- status = "okay";
-};
-
-&ddc1 {
- status = "okay";
-};
-
// =============================================
// Downstream rpi- changes
@@ -195,8 +232,6 @@
#include "bcm283x-rpi-csi1-2lane.dtsi"
#include "bcm283x-rpi-i2c0mux_0_44.dtsi"
-/delete-node/ &emmc2;
-
/ {
chosen {
bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1";
@@ -213,29 +248,7 @@
i2c4 = &i2c4;
i2c5 = &i2c5;
i2c6 = &i2c6;
- /delete-property/ ethernet;
/delete-property/ intc;
- pcie0 = &pcie0;
- emmc2bus = &emmc2bus;
- };
-
- emmc2bus: emmc2bus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
-
- ranges = <0x0 0x7e000000 0x0 0xfe000000 0x01800000>;
- dma-ranges = <0x0 0xc0000000 0x0 0x00000000 0x40000000>;
-
- emmc2: emmc2@7e340000 {
- compatible = "brcm,bcm2711-emmc2";
- status = "okay";
- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2711_CLOCK_EMMC2>;
- reg = <0x0 0x7e340000 0x100>;
- vqmmc-supply = <&sd_io_1v8_reg>;
- broken-cd;
- };
};
/delete-node/ wifi-pwrseq;
@@ -557,6 +570,7 @@
eth_led0 = <&phy1>,"led-modes:0";
eth_led1 = <&phy1>,"led-modes:4";
+ sd_poll_once = <&emmc2>, "non-removable?";
spi_dma4 = <&spi0>, "dmas:0=", <&dma40>,
<&spi0>, "dmas:8=", <&dma40>;
};
--- a/arch/arm/boot/dts/bcm2711-rpi-cm4.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dts
@@ -19,7 +19,9 @@
};
aliases {
+ emmc2bus = &emmc2bus;
ethernet0 = &genet;
+ pcie0 = &pcie0;
};
leds {
@@ -30,6 +32,8 @@
pwr {
label = "PWR";
gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ linux,default-trigger = "default-on";
};
};
@@ -150,46 +154,6 @@
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
};
-&vc4 {
- status = "okay";
-};
-
-&pixelvalve0 {
- status = "okay";
-};
-
-&pixelvalve1 {
- status = "okay";
-};
-
-&pixelvalve2 {
- status = "okay";
-};
-
-&pixelvalve3 {
- status = "okay";
-};
-
-&pixelvalve4 {
- status = "okay";
-};
-
-&hdmi0 {
- status = "okay";
-};
-
-&ddc0 {
- status = "okay";
-};
-
-&hdmi1 {
- status = "okay";
-};
-
-&ddc1 {
- status = "okay";
-};
-
// =============================================
// Downstream rpi- changes
@@ -208,8 +172,6 @@
#include "bcm283x-rpi-csi1-4lane.dtsi"
#include "bcm283x-rpi-i2c0mux_0_44.dtsi"
-/delete-node/ &emmc2;
-
/ {
chosen {
bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1";
@@ -226,29 +188,7 @@
i2c4 = &i2c4;
i2c5 = &i2c5;
i2c6 = &i2c6;
- /delete-property/ ethernet;
/delete-property/ intc;
- pcie0 = &pcie0;
- emmc2bus = &emmc2bus;
- };
-
- emmc2bus: emmc2bus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
-
- ranges = <0x0 0x7e000000 0x0 0xfe000000 0x01800000>;
- dma-ranges = <0x0 0xc0000000 0x0 0x00000000 0x40000000>;
-
- emmc2: emmc2@7e340000 {
- compatible = "brcm,bcm2711-emmc2";
- status = "okay";
- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2711_CLOCK_EMMC2>;
- reg = <0x0 0x7e340000 0x100>;
- vqmmc-supply = <&sd_io_1v8_reg>;
- broken-cd;
- };
};
/delete-node/ wifi-pwrseq;
@@ -588,6 +528,7 @@
<&ant2>, "output-high?=off",
<&ant2>, "output-low?=on";
+ sd_poll_once = <&emmc2>, "non-removable?";
spi_dma4 = <&spi0>, "dmas:0=", <&dma40>,
<&spi0>, "dmas:8=", <&dma40>;
};
--- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi
@@ -4,6 +4,129 @@
/ {
soc {
/delete-node/ v3d@7ec00000;
+
+ pixelvalve0: pixelvalve@7e206000 {
+ compatible = "brcm,bcm2711-pixelvalve0";
+ reg = <0x7e206000 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ pixelvalve1: pixelvalve@7e207000 {
+ compatible = "brcm,bcm2711-pixelvalve1";
+ reg = <0x7e207000 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ pixelvalve2: pixelvalve@7e20a000 {
+ compatible = "brcm,bcm2711-pixelvalve2";
+ reg = <0x7e20a000 0x100>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ pixelvalve4: pixelvalve@7e216000 {
+ compatible = "brcm,bcm2711-pixelvalve4";
+ reg = <0x7e216000 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ pixelvalve3: pixelvalve@7ec12000 {
+ compatible = "brcm,bcm2711-pixelvalve3";
+ reg = <0x7ec12000 0x100>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ dvp: clock@7ef00000 {
+ compatible = "brcm,brcm2711-dvp";
+ reg = <0x7ef00000 0x10>;
+ clocks = <&clk_108MHz>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ hdmi0: hdmi@7ef00700 {
+ compatible = "brcm,bcm2711-hdmi0";
+ reg = <0x7ef00700 0x300>,
+ <0x7ef00300 0x200>,
+ <0x7ef00f00 0x80>,
+ <0x7ef00f80 0x80>,
+ <0x7ef01b00 0x200>,
+ <0x7ef01f00 0x400>,
+ <0x7ef00200 0x80>,
+ <0x7ef04300 0x100>,
+ <0x7ef20000 0x100>,
+ <0x7ef00100 0x30>;
+ reg-names = "hdmi",
+ "dvp",
+ "phy",
+ "rm",
+ "packet",
+ "metadata",
+ "csc",
+ "cec",
+ "hd",
+ "intr2";
+ clocks = <&firmware_clocks 13>;
+ clock-names = "hdmi";
+ resets = <&dvp 0>;
+ ddc = <&ddc0>;
+ dmas = <&dma 10>;
+ dma-names = "audio-rx";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ddc0: i2c@7ef04500 {
+ compatible = "brcm,bcm2711-hdmi-i2c";
+ reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
+ reg-names = "bsc", "auto-i2c";
+ clock-frequency = <97500>;
+ status = "disabled";
+ };
+
+ hdmi1: hdmi@7ef05700 {
+ compatible = "brcm,bcm2711-hdmi1";
+ reg = <0x7ef05700 0x300>,
+ <0x7ef05300 0x200>,
+ <0x7ef05f00 0x80>,
+ <0x7ef05f80 0x80>,
+ <0x7ef06b00 0x200>,
+ <0x7ef06f00 0x400>,
+ <0x7ef00280 0x80>,
+ <0x7ef09300 0x100>,
+ <0x7ef20000 0x100>,
+ <0x7ef00100 0x30>;
+ reg-names = "hdmi",
+ "dvp",
+ "phy",
+ "rm",
+ "packet",
+ "metadata",
+ "csc",
+ "cec",
+ "hd",
+ "intr2";
+ ddc = <&ddc1>;
+ clocks = <&firmware_clocks 13>;
+ clock-names = "hdmi";
+ resets = <&dvp 1>;
+ dmas = <&dma 17>;
+ dma-names = "audio-rx";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ddc1: i2c@7ef09500 {
+ compatible = "brcm,bcm2711-hdmi-i2c";
+ reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
+ reg-names = "bsc", "auto-i2c";
+ clock-frequency = <97500>;
+ status = "disabled";
+ };
};
__overrides__ {
@@ -42,22 +165,33 @@
scb: scb {
/* Add a label */
};
-};
-&cma {
- /* Limit cma to the lower 768MB to allow room for HIGHMEM on 32-bit */
- alloc-ranges = <0x0 0x00000000 0x30000000>;
+ vc4: gpu {
+ compatible = "brcm,bcm2711-vc5";
+ status = "disabled";
+ };
+
+ clk_108MHz: clk-108M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <108000000>;
+ clock-output-names = "108MHz-clock";
+ };
};
&soc {
/delete-node/ audio;
};
+&cma {
+ /* Limit cma to the lower 768MB to allow room for HIGHMEM on 32-bit */
+ alloc-ranges = <0x0 0x00000000 0x30000000>;
+};
+
&scb {
ranges = <0x0 0x7c000000 0x0 0xfc000000 0x0 0x03800000>,
<0x0 0x40000000 0x0 0xff800000 0x0 0x00800000>,
- <0x6 0x00000000 0x6 0x00000000 0x0 0x40000000>,
- <0x0 0x00000000 0x0 0x00000000 0x0 0xfc000000>;
+ <0x6 0x00000000 0x6 0x00000000 0x0 0x40000000>;
dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0xfc000000>,
<0x1 0x00000000 0x1 0x00000000 0x1 0x00000000>;
@@ -171,6 +305,10 @@
compatible = "brcm,bcm2711-genet-v5", "brcm,genet-v5";
};
+&hvs {
+ clocks = <&firmware_clocks 4>;
+};
+
&firmware {
firmware_clocks: clocks {
compatible = "raspberrypi,firmware-clocks";
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -12,18 +12,6 @@
interrupt-parent = <&gicv2>;
- vc4: gpu {
- compatible = "brcm,bcm2711-vc5";
- status = "disabled";
- };
-
- clk_108MHz: clk-108M {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <108000000>;
- clock-output-names = "108MHz-clock";
- };
-
soc {
/*
* Defined ranges:
@@ -245,27 +233,6 @@
status = "disabled";
};
- pixelvalve0: pixelvalve@7e206000 {
- compatible = "brcm,bcm2711-pixelvalve0";
- reg = <0x7e206000 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- pixelvalve1: pixelvalve@7e207000 {
- compatible = "brcm,bcm2711-pixelvalve1";
- reg = <0x7e207000 0x100>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- pixelvalve2: pixelvalve@7e20a000 {
- compatible = "brcm,bcm2711-pixelvalve2";
- reg = <0x7e20a000 0x100>;
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
pwm1: pwm@7e20c800 {
compatible = "brcm,bcm2835-pwm";
reg = <0x7e20c800 0x28>;
@@ -276,118 +243,30 @@
status = "disabled";
};
- pixelvalve4: pixelvalve@7e216000 {
- compatible = "brcm,bcm2711-pixelvalve4";
- reg = <0x7e216000 0x100>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- emmc2: emmc2@7e340000 {
- compatible = "brcm,bcm2711-emmc2";
- reg = <0x7e340000 0x100>;
- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clocks BCM2711_CLOCK_EMMC2>;
- status = "disabled";
- };
-
hvs@7e400000 {
- clocks = <&firmware_clocks 4>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
};
+ };
- pixelvalve3: pixelvalve@7ec12000 {
- compatible = "brcm,bcm2711-pixelvalve3";
- reg = <0x7ec12000 0x100>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
+ /*
+ * emmc2 has different DMA constraints based on SoC revisions. It was
+ * moved into its own bus, so as for RPi4's firmware to update them.
+ * The firmware will find whether the emmc2bus alias is defined, and if
+ * so, it'll edit the dma-ranges property below accordingly.
+ */
+ emmc2bus: emmc2bus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
- dvp: clock@7ef00000 {
- compatible = "brcm,brcm2711-dvp";
- reg = <0x7ef00000 0x10>;
- clocks = <&clk_108MHz>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
+ ranges = <0x0 0x7e000000 0x0 0xfe000000 0x01800000>;
+ dma-ranges = <0x0 0xc0000000 0x0 0x00000000 0x40000000>;
- hdmi0: hdmi@7ef00700 {
- compatible = "brcm,bcm2711-hdmi0";
- reg = <0x7ef00700 0x300>,
- <0x7ef00300 0x200>,
- <0x7ef00f00 0x80>,
- <0x7ef00f80 0x80>,
- <0x7ef01b00 0x200>,
- <0x7ef01f00 0x400>,
- <0x7ef00200 0x80>,
- <0x7ef04300 0x100>,
- <0x7ef20000 0x100>,
- <0x7ef00100 0x30>;
- reg-names = "hdmi",
- "dvp",
- "phy",
- "rm",
- "packet",
- "metadata",
- "csc",
- "cec",
- "hd",
- "intr2";
- clocks = <&firmware_clocks 13>;
- clock-names = "hdmi";
- resets = <&dvp 0>;
- ddc = <&ddc0>;
- dmas = <&dma 10>;
- dma-names = "audio-rx";
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- ddc0: i2c@7ef04500 {
- compatible = "brcm,bcm2711-hdmi-i2c";
- reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
- reg-names = "bsc", "auto-i2c";
- clock-frequency = <97500>;
- status = "disabled";
- };
-
- hdmi1: hdmi@7ef05700 {
- compatible = "brcm,bcm2711-hdmi1";
- reg = <0x7ef05700 0x300>,
- <0x7ef05300 0x200>,
- <0x7ef05f00 0x80>,
- <0x7ef05f80 0x80>,
- <0x7ef06b00 0x200>,
- <0x7ef06f00 0x400>,
- <0x7ef00280 0x80>,
- <0x7ef09300 0x100>,
- <0x7ef20000 0x100>,
- <0x7ef00100 0x30>;
- reg-names = "hdmi",
- "dvp",
- "phy",
- "rm",
- "packet",
- "metadata",
- "csc",
- "cec",
- "hd",
- "intr2";
- ddc = <&ddc1>;
- clocks = <&firmware_clocks 13>;
- clock-names = "hdmi";
- resets = <&dvp 1>;
- dmas = <&dma 17>;
- dma-names = "audio-rx";
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- ddc1: i2c@7ef09500 {
- compatible = "brcm,bcm2711-hdmi-i2c";
- reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
- reg-names = "bsc", "auto-i2c";
- clock-frequency = <97500>;
+ emmc2: emmc2@7e340000 {
+ compatible = "brcm,bcm2711-emmc2";
+ reg = <0x0 0x7e340000 0x100>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clocks BCM2711_CLOCK_EMMC2>;
status = "disabled";
};
};
Reference in New Issue Copy Permalink