Openwrt/target/linux/layerscape/patches-5.4/302-dts-0004-arm64-dts-ls1012a-Add-more-nodes-to-LS1012A-FRWY-boa.patch

From 9ba5a56b7241c46aa47544f8414ad1f3d445f3c1 Mon Sep 17 00:00:00 2001
From: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Date: Mon, 7 May 2018 11:52:04 +0530
Subject: [PATCH] arm64: dts: ls1012a: Add more nodes to LS1012A-FRWY board
 support

LS1012A-FRWY is a different design from LS1012A-FRDM,
but has some common SoC features. Key feature on this
board is 2x1G SGMII PFE MAC, Micro SD, USB 3.0, DDR,
QuadSPI, Audio, UART.

Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts | 118 +++++++++++++++++++++
 1 file changed, 118 insertions(+)

--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
@@ -14,6 +14,58 @@
 / {
 	model = "LS1012A FRWY Board";
 	compatible = "fsl,ls1012a-frwy", "fsl,ls1012a";
+
+	aliases {
+		ethernet0 = &pfe_mac0;
+		ethernet1 = &pfe_mac1;
+	};
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+			system-clock-frequency = <25000000>;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
 };
 
 &duart0 {
@@ -22,4 +74,70 @@
 
 &i2c0 {
 	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		reg = <0xa>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_1p8v>;
+		clocks = <&sys_mclk>;
+	};
+};
+
+&qspi {
+	num-cs = <1>;
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: w25q16dw@0 {
+		compatible = "spansion,m25p80";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		m25p,fast-read;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&pfe {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ethernet@0 {
+		compatible = "fsl,pfe-gemac-port";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0>;	/* GEM_ID */
+		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
+		fsl,gemac-phy-id = <0x2>;	/* PHY_ID */
+		fsl,mdio-mux-val = <0x0>;
+		phy-mode = "sgmii";
+		fsl,pfe-phy-if-flags = <0x0>;
+
+		mdio@0 {
+			reg = <0x1>; /* enabled/disabled */
+		};
+	};
+
+	ethernet@1 {
+		compatible = "fsl,pfe-gemac-port";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x1>;	/* GEM_ID */
+		fsl,gemac-bus-id = <0x1>;	/* BUS_ID */
+		fsl,gemac-phy-id = <0x1>;	/* PHY_ID */
+		fsl,mdio-mux-val = <0x0>;
+		phy-mode = "sgmii";
+		fsl,pfe-phy-if-flags = <0x0>;
+
+		mdio@0 {
+			reg = <0x0>; /* enabled/disabled */
+		};
+	};
+};
+
+&sai2 {
+	status = "okay";
 };