Openwrt/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig

if RALINK_RT305X

menu "Ralink RT350x machine selection"

config RT305X_MACH_F5D8235_V2
	bool "Belkin F5D8235 v2 support"
	default y
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_WHR_G300N
	bool "Buffalo WHR-G300N support"
	default y
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_DIR_300_REVB
	bool "D-Link DIR-300 revB board support"
	default y
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_V22RW_2X2
	bool "Ralink AP-RT3052-V22RW-2X2 board support"
	default y
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_WCR150GN
	bool "Sparklan WCR-150GN support"
	default y
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_FONERA20N
	bool "La Fonera20N board support"
	default y
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_PWH2004
	bool "Prolink PWH2004 / Abocom WR5205 support (32M RAM, 8M flash)"
	default y
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_HW550_3G
	bool "Aztech HW550-3G support"
	default y
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_MOFI3500_3GN
	bool "MoFi Network MOFI3500-3GN support"
	default y
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

endmenu

endif
initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00			`if RALINK_RT305X`

			`menu "Ralink RT350x machine selection"`

ramips: add support for Belkin F5D8235 v2 board No support for usb for now. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 24126 2010-11-24 10:01:23 +00:00			`config RT305X_MACH_F5D8235_V2`
			`bool "Belkin F5D8235 v2 support"`
			`default y`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00			`config RT305X_MACH_WHR_G300N`
			`bool "Buffalo WHR-G300N support"`
			`default y`
ramips: register gpio buttons on the WHR-G300N board SVN-Revision: 19412 2010-01-30 15:25:49 +00:00			`select RALINK_DEV_GPIO_BUTTONS`
add common GPIO LED support SVN-Revision: 17448 2009-08-31 09:14:14 +00:00			`select RALINK_DEV_GPIO_LEDS`
initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00
ramips: add preliminary support for the DIR-300 revB board SVN-Revision: 18058 2009-10-18 08:48:07 +00:00			`config RT305X_MACH_DIR_300_REVB`
			`bool "D-Link DIR-300 revB board support"`
			`default y`
ramips: register gpio buttons on the DIR-300 revB board SVN-Revision: 19410 2010-01-30 15:25:44 +00:00			`select RALINK_DEV_GPIO_BUTTONS`
ramips: add preliminary support for the DIR-300 revB board SVN-Revision: 18058 2009-10-18 08:48:07 +00:00			`select RALINK_DEV_GPIO_LEDS`

initial support for the AP-R3052-V22RW-2X2 board SVN-Revision: 17473 2009-09-02 15:31:00 +00:00			`config RT305X_MACH_V22RW_2X2`
			`bool "Ralink AP-RT3052-V22RW-2X2 board support"`
			`default y`
ramips: register gpio buttons on the V22RW-2x2 board SVN-Revision: 19411 2010-01-30 15:25:47 +00:00			`select RALINK_DEV_GPIO_BUTTONS`
initial support for the AP-R3052-V22RW-2X2 board SVN-Revision: 17473 2009-09-02 15:31:00 +00:00			`select RALINK_DEV_GPIO_LEDS`

ramips: add support for Sparklan WCR-150GN board This patch adds support for Sparklan WCR-150GN board. Network configuration should be tweaked to make it work fully. The reason it's not in this patch is that ramips target should be modified to support different /etc/config/network files for different boards. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 22658 2010-08-15 09:43:07 +00:00			`config RT305X_MACH_WCR150GN`
			`bool "Sparklan WCR-150GN support"`
			`default y`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

adds mach type for fonera20n SVN-Revision: 18132 2009-10-24 20:55:36 +00:00			`config RT305X_MACH_FONERA20N`
			`bool "La Fonera20N board support"`
			`default y`
ramips: register gpio buttons on the Fonera 2.0N board SVN-Revision: 19413 2010-01-30 15:25:52 +00:00			`select RALINK_DEV_GPIO_BUTTONS`
adds mach type for fonera20n SVN-Revision: 18132 2009-10-24 20:55:36 +00:00			`select RALINK_DEV_GPIO_LEDS`

ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205) The attached patch adds a preliminary support for Prolink PWH2004 board (Ralink RT305x based). LAN and flash appear to work. However, the USB port and WLAN I have not managed to activate properly yet, but that problem appears to be present with other rt305x targets as well(?). Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi> SVN-Revision: 23129 2010-09-27 14:43:34 +00:00			`config RT305X_MACH_PWH2004`
			`bool "Prolink PWH2004 / Abocom WR5205 support (32M RAM, 8M flash)"`
			`default y`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: initial board support for Aztech HW550-3G This patch adds initial support for the Aztech HW550-3G (Ralink RT3052f SoC, 8MB flash, 32MB dram). Ethernet is not working yet. Wireless appears to work fine. USB does not work yet (as with other Ralink boards). Signed-off-by: Layne Edwards <ledwards76@gmail.com> SVN-Revision: 26123 2011-03-13 16:34:52 +00:00			`config RT305X_MACH_HW550_3G`
			`bool "Aztech HW550-3G support"`
			`default y`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: initial board support for MOFI3500-3GN This patch adds initial board support for the MoFi Network MOFI3500-3GN (Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG). This router is basically the NA version of the HW550-3G. Signed-off-by: Layne Edwards <ledwards76@gmail.com> SVN-Revision: 26466 2011-04-04 08:43:07 +00:00			`config RT305X_MACH_MOFI3500_3GN`
			`bool "MoFi Network MOFI3500-3GN support"`
			`default y`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00			`endmenu`

			`endif`