Openwrt/target/linux/brcm47xx/patches-2.6.28/810-ssb-add-pmu-support.patch

Sent to mainline on 2009 Feb 03.

For further modifications, please use separate patch files. This simpifies
keeping track of what is upstream and what is not. Thanks.

--mb


--- a/drivers/ssb/Makefile
+++ b/drivers/ssb/Makefile
@@ -9,6 +9,7 @@ ssb-$(CONFIG_SSB_PCMCIAHOST)		+= pcmcia.
 
 # built-in drivers
 ssb-y					+= driver_chipcommon.o
+ssb-y					+= driver_chipcommon_pmu.o
 ssb-$(CONFIG_SSB_DRIVER_MIPS)		+= driver_mipscore.o
 ssb-$(CONFIG_SSB_DRIVER_EXTIF)		+= driver_extif.o
 ssb-$(CONFIG_SSB_DRIVER_PCICORE)	+= driver_pcicore.o
--- /dev/null
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -0,0 +1,508 @@
+/*
+ * Sonics Silicon Backplane
+ * Broadcom ChipCommon Power Management Unit driver
+ *
+ * Copyright 2009, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2007, Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_regs.h>
+#include <linux/ssb/ssb_driver_chipcommon.h>
+#include <linux/delay.h>
+
+#include "ssb_private.h"
+
+static u32 ssb_chipco_pll_read(struct ssb_chipcommon *cc, u32 offset)
+{
+	chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset);
+	return chipco_read32(cc, SSB_CHIPCO_PLLCTL_DATA);
+}
+
+static void ssb_chipco_pll_write(struct ssb_chipcommon *cc,
+				 u32 offset, u32 value)
+{
+	chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset);
+	chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
+}
+
+struct pmu0_plltab_entry {
+	u16 freq;	/* Crystal frequency in kHz.*/
+	u8 xf;		/* Crystal frequency value for PMU control */
+	u8 wb_int;
+	u32 wb_frac;
+};
+
+static const struct pmu0_plltab_entry pmu0_plltab[] = {
+	{ .freq = 12000, .xf =  1, .wb_int = 73, .wb_frac = 349525, },
+	{ .freq = 13000, .xf =  2, .wb_int = 67, .wb_frac = 725937, },
+	{ .freq = 14400, .xf =  3, .wb_int = 61, .wb_frac = 116508, },
+	{ .freq = 15360, .xf =  4, .wb_int = 57, .wb_frac = 305834, },
+	{ .freq = 16200, .xf =  5, .wb_int = 54, .wb_frac = 336579, },
+	{ .freq = 16800, .xf =  6, .wb_int = 52, .wb_frac = 399457, },
+	{ .freq = 19200, .xf =  7, .wb_int = 45, .wb_frac = 873813, },
+	{ .freq = 19800, .xf =  8, .wb_int = 44, .wb_frac = 466033, },
+	{ .freq = 20000, .xf =  9, .wb_int = 44, .wb_frac = 0,      },
+	{ .freq = 25000, .xf = 10, .wb_int = 70, .wb_frac = 419430, },
+	{ .freq = 26000, .xf = 11, .wb_int = 67, .wb_frac = 725937, },
+	{ .freq = 30000, .xf = 12, .wb_int = 58, .wb_frac = 699050, },
+	{ .freq = 38400, .xf = 13, .wb_int = 45, .wb_frac = 873813, },
+	{ .freq = 40000, .xf = 14, .wb_int = 45, .wb_frac = 0,      },
+};
+#define SSB_PMU0_DEFAULT_XTALFREQ	20000
+
+static const struct pmu0_plltab_entry * pmu0_plltab_find_entry(u32 crystalfreq)
+{
+	const struct pmu0_plltab_entry *e;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(pmu0_plltab); i++) {
+		e = &pmu0_plltab[i];
+		if (e->freq == crystalfreq)
+			return e;
+	}
+
+	return NULL;
+}
+
+/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */
+static void ssb_pmu0_pllinit_r0(struct ssb_chipcommon *cc,
+				u32 crystalfreq)
+{
+	struct ssb_bus *bus = cc->dev->bus;
+	const struct pmu0_plltab_entry *e = NULL;
+	u32 pmuctl, tmp, pllctl;
+	unsigned int i;
+
+	if ((bus->chip_id == 0x5354) && !crystalfreq) {
+		/* The 5354 crystal freq is 25MHz */
+		crystalfreq = 25000;
+	}
+	if (crystalfreq)
+		e = pmu0_plltab_find_entry(crystalfreq);
+	if (!e)
+		e = pmu0_plltab_find_entry(SSB_PMU0_DEFAULT_XTALFREQ);
+	BUG_ON(!e);
+	crystalfreq = e->freq;
+	cc->pmu.crystalfreq = e->freq;
+
+	/* Check if the PLL already is programmed to this frequency. */
+	pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
+	if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) {
+		/* We're already there... */
+		return;
+	}
+
+	ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+		   (crystalfreq / 1000), (crystalfreq % 1000));
+
+	/* First turn the PLL off. */
+	switch (bus->chip_id) {
+	case 0x4328:
+		chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
+			      ~(1 << SSB_PMURES_4328_BB_PLL_PU));
+		chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
+			      ~(1 << SSB_PMURES_4328_BB_PLL_PU));
+		break;
+	case 0x5354:
+		chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
+			      ~(1 << SSB_PMURES_5354_BB_PLL_PU));
+		chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
+			      ~(1 << SSB_PMURES_5354_BB_PLL_PU));
+		break;
+	default:
+		SSB_WARN_ON(1);
+	}
+	for (i = 1500; i; i--) {
+		tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+		if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT))
+			break;
+		udelay(10);
+	}
+	tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+	if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+		ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
+
+	/* Set PDIV in PLL control 0. */
+	pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
+	if (crystalfreq >= SSB_PMU0_PLLCTL0_PDIV_FREQ)
+		pllctl |= SSB_PMU0_PLLCTL0_PDIV_MSK;
+	else
+		pllctl &= ~SSB_PMU0_PLLCTL0_PDIV_MSK;
+	ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL0, pllctl);
+
+	/* Set WILD in PLL control 1. */
+	pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL1);
+	pllctl &= ~SSB_PMU0_PLLCTL1_STOPMOD;
+	pllctl &= ~(SSB_PMU0_PLLCTL1_WILD_IMSK | SSB_PMU0_PLLCTL1_WILD_FMSK);
+	pllctl |= ((u32)e->wb_int << SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_IMSK;
+	pllctl |= ((u32)e->wb_frac << SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_FMSK;
+	if (e->wb_frac == 0)
+		pllctl |= SSB_PMU0_PLLCTL1_STOPMOD;
+	ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL1, pllctl);
+
+	/* Set WILD in PLL control 2. */
+	pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL2);
+	pllctl &= ~SSB_PMU0_PLLCTL2_WILD_IMSKHI;
+	pllctl |= (((u32)e->wb_int >> 4) << SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT) & SSB_PMU0_PLLCTL2_WILD_IMSKHI;
+	ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL2, pllctl);
+
+	/* Set the crystalfrequency and the divisor. */
+	pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
+	pmuctl &= ~SSB_CHIPCO_PMU_CTL_ILP_DIV;
+	pmuctl |= (((crystalfreq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT)
+			& SSB_CHIPCO_PMU_CTL_ILP_DIV;
+	pmuctl &= ~SSB_CHIPCO_PMU_CTL_XTALFREQ;
+	pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ;
+	chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl);
+}
+
+struct pmu1_plltab_entry {
+	u16 freq;	/* Crystal frequency in kHz.*/
+	u8 xf;		/* Crystal frequency value for PMU control */
+	u8 ndiv_int;
+	u32 ndiv_frac;
+	u8 p1div;
+	u8 p2div;
+};
+
+static const struct pmu1_plltab_entry pmu1_plltab[] = {
+	{ .freq = 12000, .xf =  1, .p1div = 3, .p2div = 22, .ndiv_int =  0x9, .ndiv_frac = 0xFFFFEF, },
+	{ .freq = 13000, .xf =  2, .p1div = 1, .p2div =  6, .ndiv_int =  0xb, .ndiv_frac = 0x483483, },
+	{ .freq = 14400, .xf =  3, .p1div = 1, .p2div = 10, .ndiv_int =  0xa, .ndiv_frac = 0x1C71C7, },
+	{ .freq = 15360, .xf =  4, .p1div = 1, .p2div =  5, .ndiv_int =  0xb, .ndiv_frac = 0x755555, },
+	{ .freq = 16200, .xf =  5, .p1div = 1, .p2div = 10, .ndiv_int =  0x5, .ndiv_frac = 0x6E9E06, },
+	{ .freq = 16800, .xf =  6, .p1div = 1, .p2div = 10, .ndiv_int =  0x5, .ndiv_frac = 0x3CF3CF, },
+	{ .freq = 19200, .xf =  7, .p1div = 1, .p2div =  9, .ndiv_int =  0x5, .ndiv_frac = 0x17B425, },
+	{ .freq = 19800, .xf =  8, .p1div = 1, .p2div = 11, .ndiv_int =  0x4, .ndiv_frac = 0xA57EB,  },
+	{ .freq = 20000, .xf =  9, .p1div = 1, .p2div = 11, .ndiv_int =  0x4, .ndiv_frac = 0,        },
+	{ .freq = 24000, .xf = 10, .p1div = 3, .p2div = 11, .ndiv_int =  0xa, .ndiv_frac = 0,        },
+	{ .freq = 25000, .xf = 11, .p1div = 5, .p2div = 16, .ndiv_int =  0xb, .ndiv_frac = 0,        },
+	{ .freq = 26000, .xf = 12, .p1div = 1, .p2div =  2, .ndiv_int = 0x10, .ndiv_frac = 0xEC4EC4, },
+	{ .freq = 30000, .xf = 13, .p1div = 3, .p2div =  8, .ndiv_int =  0xb, .ndiv_frac = 0,        },
+	{ .freq = 38400, .xf = 14, .p1div = 1, .p2div =  5, .ndiv_int =  0x4, .ndiv_frac = 0x955555, },
+	{ .freq = 40000, .xf = 15, .p1div = 1, .p2div =  2, .ndiv_int =  0xb, .ndiv_frac = 0,        },
+};
+
+#define SSB_PMU1_DEFAULT_XTALFREQ	15360
+
+static const struct pmu1_plltab_entry * pmu1_plltab_find_entry(u32 crystalfreq)
+{
+	const struct pmu1_plltab_entry *e;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(pmu1_plltab); i++) {
+		e = &pmu1_plltab[i];
+		if (e->freq == crystalfreq)
+			return e;
+	}
+
+	return NULL;
+}
+
+/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */
+static void ssb_pmu1_pllinit_r0(struct ssb_chipcommon *cc,
+				u32 crystalfreq)
+{
+	struct ssb_bus *bus = cc->dev->bus;
+	const struct pmu1_plltab_entry *e = NULL;
+	u32 buffer_strength = 0;
+	u32 tmp, pllctl, pmuctl;
+	unsigned int i;
+
+	if (bus->chip_id == 0x4312) {
+		/* We do not touch the BCM4312 PLL and assume
+		 * the default crystal settings work out-of-the-box. */
+		cc->pmu.crystalfreq = 20000;
+		return;
+	}
+
+	if (crystalfreq)
+		e = pmu1_plltab_find_entry(crystalfreq);
+	if (!e)
+		e = pmu1_plltab_find_entry(SSB_PMU1_DEFAULT_XTALFREQ);
+	BUG_ON(!e);
+	crystalfreq = e->freq;
+	cc->pmu.crystalfreq = e->freq;
+
+	/* Check if the PLL already is programmed to this frequency. */
+	pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
+	if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) {
+		/* We're already there... */
+		return;
+	}
+
+	ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
+		   (crystalfreq / 1000), (crystalfreq % 1000));
+
+	/* First turn the PLL off. */
+	switch (bus->chip_id) {
+	case 0x4325:
+		chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
+			      ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) |
+				(1 << SSB_PMURES_4325_HT_AVAIL)));
+		chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
+			      ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) |
+				(1 << SSB_PMURES_4325_HT_AVAIL)));
+		/* Adjust the BBPLL to 2 on all channels later. */
+		buffer_strength = 0x222222;
+		break;
+	default:
+		SSB_WARN_ON(1);
+	}
+	for (i = 1500; i; i--) {
+		tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+		if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT))
+			break;
+		udelay(10);
+	}
+	tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
+	if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
+		ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
+
+	/* Set p1div and p2div. */
+	pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
+	pllctl &= ~(SSB_PMU1_PLLCTL0_P1DIV | SSB_PMU1_PLLCTL0_P2DIV);
+	pllctl |= ((u32)e->p1div << SSB_PMU1_PLLCTL0_P1DIV_SHIFT) & SSB_PMU1_PLLCTL0_P1DIV;
+	pllctl |= ((u32)e->p2div << SSB_PMU1_PLLCTL0_P2DIV_SHIFT) & SSB_PMU1_PLLCTL0_P2DIV;
+	ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, pllctl);
+
+	/* Set ndiv int and ndiv mode */
+	pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL2);
+	pllctl &= ~(SSB_PMU1_PLLCTL2_NDIVINT | SSB_PMU1_PLLCTL2_NDIVMODE);
+	pllctl |= ((u32)e->ndiv_int << SSB_PMU1_PLLCTL2_NDIVINT_SHIFT) & SSB_PMU1_PLLCTL2_NDIVINT;
+	pllctl |= (1 << SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT) & SSB_PMU1_PLLCTL2_NDIVMODE;
+	ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, pllctl);
+
+	/* Set ndiv frac */
+	pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL3);
+	pllctl &= ~SSB_PMU1_PLLCTL3_NDIVFRAC;
+	pllctl |= ((u32)e->ndiv_frac << SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT) & SSB_PMU1_PLLCTL3_NDIVFRAC;
+	ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, pllctl);
+
+	/* Change the drive strength, if required. */
+	if (buffer_strength) {
+		pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL5);
+		pllctl &= ~SSB_PMU1_PLLCTL5_CLKDRV;
+		pllctl |= (buffer_strength << SSB_PMU1_PLLCTL5_CLKDRV_SHIFT) & SSB_PMU1_PLLCTL5_CLKDRV;
+		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, pllctl);
+	}
+
+	/* Tune the crystalfreq and the divisor. */
+	pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
+	pmuctl &= ~(SSB_CHIPCO_PMU_CTL_ILP_DIV | SSB_CHIPCO_PMU_CTL_XTALFREQ);
+	pmuctl |= ((((u32)e->freq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT)
+			& SSB_CHIPCO_PMU_CTL_ILP_DIV;
+	pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ;
+	chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl);
+}
+
+static void ssb_pmu_pll_init(struct ssb_chipcommon *cc)
+{
+	struct ssb_bus *bus = cc->dev->bus;
+	u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */
+
+	if (bus->bustype == SSB_BUSTYPE_SSB) {
+		/* TODO: The user may override the crystal frequency. */
+	}
+
+	switch (bus->chip_id) {
+	case 0x4312:
+	case 0x4325:
+		ssb_pmu1_pllinit_r0(cc, crystalfreq);
+		break;
+	case 0x4328:
+	case 0x5354:
+		ssb_pmu0_pllinit_r0(cc, crystalfreq);
+		break;
+	default:
+		ssb_printk(KERN_ERR PFX
+			   "ERROR: PLL init unknown for device %04X\n",
+			   bus->chip_id);
+	}
+}
+
+struct pmu_res_updown_tab_entry {
+	u8 resource;	/* The resource number */
+	u16 updown;	/* The updown value */
+};
+
+enum pmu_res_depend_tab_task {
+	PMU_RES_DEP_SET = 1,
+	PMU_RES_DEP_ADD,
+	PMU_RES_DEP_REMOVE,
+};
+
+struct pmu_res_depend_tab_entry {
+	u8 resource;	/* The resource number */
+	u8 task;	/* SET | ADD | REMOVE */
+	u32 depend;	/* The depend mask */
+};
+
+static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4328a0[] = {
+	{ .resource = SSB_PMURES_4328_EXT_SWITCHER_PWM,		.updown = 0x0101, },
+	{ .resource = SSB_PMURES_4328_BB_SWITCHER_PWM,		.updown = 0x1F01, },
+	{ .resource = SSB_PMURES_4328_BB_SWITCHER_BURST,	.updown = 0x010F, },
+	{ .resource = SSB_PMURES_4328_BB_EXT_SWITCHER_BURST,	.updown = 0x0101, },
+	{ .resource = SSB_PMURES_4328_ILP_REQUEST,		.updown = 0x0202, },
+	{ .resource = SSB_PMURES_4328_RADIO_SWITCHER_PWM,	.updown = 0x0F01, },
+	{ .resource = SSB_PMURES_4328_RADIO_SWITCHER_BURST,	.updown = 0x0F01, },
+	{ .resource = SSB_PMURES_4328_ROM_SWITCH,		.updown = 0x0101, },
+	{ .resource = SSB_PMURES_4328_PA_REF_LDO,		.updown = 0x0F01, },
+	{ .resource = SSB_PMURES_4328_RADIO_LDO,		.updown = 0x0F01, },
+	{ .resource = SSB_PMURES_4328_AFE_LDO,			.updown = 0x0F01, },
+	{ .resource = SSB_PMURES_4328_PLL_LDO,			.updown = 0x0F01, },
+	{ .resource = SSB_PMURES_4328_BG_FILTBYP,		.updown = 0x0101, },
+	{ .resource = SSB_PMURES_4328_TX_FILTBYP,		.updown = 0x0101, },
+	{ .resource = SSB_PMURES_4328_RX_FILTBYP,		.updown = 0x0101, },
+	{ .resource = SSB_PMURES_4328_XTAL_PU,			.updown = 0x0101, },
+	{ .resource = SSB_PMURES_4328_XTAL_EN,			.updown = 0xA001, },
+	{ .resource = SSB_PMURES_4328_BB_PLL_FILTBYP,		.updown = 0x0101, },
+	{ .resource = SSB_PMURES_4328_RF_PLL_FILTBYP,		.updown = 0x0101, },
+	{ .resource = SSB_PMURES_4328_BB_PLL_PU,		.updown = 0x0701, },
+};
+
+static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4328a0[] = {
+	{
+		/* Adjust ILP Request to avoid forcing EXT/BB into burst mode. */
+		.resource = SSB_PMURES_4328_ILP_REQUEST,
+		.task = PMU_RES_DEP_SET,
+		.depend = ((1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) |
+			   (1 << SSB_PMURES_4328_BB_SWITCHER_PWM)),
+	},
+};
+
+static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4325a0[] = {
+	{ .resource = SSB_PMURES_4325_XTAL_PU,			.updown = 0x1501, },
+};
+
+static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4325a0[] = {
+	{
+		/* Adjust HT-Available dependencies. */
+		.resource = SSB_PMURES_4325_HT_AVAIL,
+		.task = PMU_RES_DEP_ADD,
+		.depend = ((1 << SSB_PMURES_4325_RX_PWRSW_PU) |
+			   (1 << SSB_PMURES_4325_TX_PWRSW_PU) |
+			   (1 << SSB_PMURES_4325_LOGEN_PWRSW_PU) |
+			   (1 << SSB_PMURES_4325_AFE_PWRSW_PU)),
+	},
+};
+
+static void ssb_pmu_resources_init(struct ssb_chipcommon *cc)
+{
+	struct ssb_bus *bus = cc->dev->bus;
+	u32 min_msk = 0, max_msk = 0;
+	unsigned int i;
+	const struct pmu_res_updown_tab_entry *updown_tab = NULL;
+	unsigned int updown_tab_size;
+	const struct pmu_res_depend_tab_entry *depend_tab = NULL;
+	unsigned int depend_tab_size;
+
+	switch (bus->chip_id) {
+	case 0x4312:
+		/* We keep the default settings:
+		 * min_msk = 0xCBB
+		 * max_msk = 0x7FFFF
+		 */
+		break;
+	case 0x4325:
+		/* Power OTP down later. */
+		min_msk = (1 << SSB_PMURES_4325_CBUCK_BURST) |
+			  (1 << SSB_PMURES_4325_LNLDO2_PU);
+		if (chipco_read32(cc, SSB_CHIPCO_CHIPSTAT) &
+		    SSB_CHIPCO_CHST_4325_PMUTOP_2B)
+			min_msk |= (1 << SSB_PMURES_4325_CLDO_CBUCK_BURST);
+		/* The PLL may turn on, if it decides so. */
+		max_msk = 0xFFFFF;
+		updown_tab = pmu_res_updown_tab_4325a0;
+		updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4325a0);
+		depend_tab = pmu_res_depend_tab_4325a0;
+		depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4325a0);
+		break;
+	case 0x4328:
+		min_msk = (1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) |
+			  (1 << SSB_PMURES_4328_BB_SWITCHER_PWM) |
+			  (1 << SSB_PMURES_4328_XTAL_EN);
+		/* The PLL may turn on, if it decides so. */
+		max_msk = 0xFFFFF;
+		updown_tab = pmu_res_updown_tab_4328a0;
+		updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4328a0);
+		depend_tab = pmu_res_depend_tab_4328a0;
+		depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4328a0);
+		break;
+	case 0x5354:
+		/* The PLL may turn on, if it decides so. */
+		max_msk = 0xFFFFF;
+		break;
+	default:
+		ssb_printk(KERN_ERR PFX
+			   "ERROR: PMU resource config unknown for device %04X\n",
+			   bus->chip_id);
+	}
+
+	if (updown_tab) {
+		for (i = 0; i < updown_tab_size; i++) {
+			chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL,
+				       updown_tab[i].resource);
+			chipco_write32(cc, SSB_CHIPCO_PMU_RES_UPDNTM,
+				       updown_tab[i].updown);
+		}
+	}
+	if (depend_tab) {
+		for (i = 0; i < depend_tab_size; i++) {
+			chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL,
+				       depend_tab[i].resource);
+			switch (depend_tab[i].task) {
+			case PMU_RES_DEP_SET:
+				chipco_write32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
+					       depend_tab[i].depend);
+				break;
+			case PMU_RES_DEP_ADD:
+				chipco_set32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
+					     depend_tab[i].depend);
+				break;
+			case PMU_RES_DEP_REMOVE:
+				chipco_mask32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
+					      ~(depend_tab[i].depend));
+				break;
+			default:
+				SSB_WARN_ON(1);
+			}
+		}
+	}
+
+	/* Set the resource masks. */
+	if (min_msk)
+		chipco_write32(cc, SSB_CHIPCO_PMU_MINRES_MSK, min_msk);
+	if (max_msk)
+		chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk);
+}
+
+void ssb_pmu_init(struct ssb_chipcommon *cc)
+{
+	struct ssb_bus *bus = cc->dev->bus;
+	u32 pmucap;
+
+	if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
+		return;
+
+	pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
+	cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
+
+	ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
+		    cc->pmu.rev, pmucap);
+
+	if (cc->pmu.rev >= 1) {
+		if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) {
+			chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
+				      ~SSB_CHIPCO_PMU_CTL_NOILPONW);
+		} else {
+			chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
+				     SSB_CHIPCO_PMU_CTL_NOILPONW);
+		}
+	}
+	ssb_pmu_pll_init(cc);
+	ssb_pmu_resources_init(cc);
+}
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -26,19 +26,6 @@ enum ssb_clksrc {
 };
 
 
-static inline u32 chipco_read32(struct ssb_chipcommon *cc,
-				u16 offset)
-{
-	return ssb_read32(cc->dev, offset);
-}
-
-static inline void chipco_write32(struct ssb_chipcommon *cc,
-				  u16 offset,
-				  u32 value)
-{
-	ssb_write32(cc->dev, offset, value);
-}
-
 static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
 					u32 mask, u32 value)
 {
@@ -246,6 +233,7 @@ void ssb_chipcommon_init(struct ssb_chip
 {
 	if (!cc->dev)
 		return; /* We don't have a ChipCommon */
+	ssb_pmu_init(cc);
 	chipco_powercontrol_init(cc);
 	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
 	calc_fast_powerup_delay(cc);
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -181,6 +181,16 @@
 #define SSB_CHIPCO_PROG_WAITCNT		0x0124
 #define SSB_CHIPCO_FLASH_CFG		0x0128
 #define SSB_CHIPCO_FLASH_WAITCNT	0x012C
+#define SSB_CHIPCO_CLKCTLST		0x01E0 /* Clock control and status (rev >= 20) */
+#define  SSB_CHIPCO_CLKCTLST_FORCEALP	0x00000001 /* Force ALP request */
+#define  SSB_CHIPCO_CLKCTLST_FORCEHT	0x00000002 /* Force HT request */
+#define  SSB_CHIPCO_CLKCTLST_FORCEILP	0x00000004 /* Force ILP request */
+#define  SSB_CHIPCO_CLKCTLST_HAVEALPREQ	0x00000008 /* ALP available request */
+#define  SSB_CHIPCO_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
+#define  SSB_CHIPCO_CLKCTLST_HWCROFF	0x00000020 /* Force HW clock request off */
+#define  SSB_CHIPCO_CLKCTLST_HAVEHT	0x00010000 /* HT available */
+#define  SSB_CHIPCO_CLKCTLST_HAVEALP	0x00020000 /* APL available */
+#define SSB_CHIPCO_HW_WORKAROUND	0x01E4 /* Hardware workaround (rev >= 20) */
 #define SSB_CHIPCO_UART0_DATA		0x0300
 #define SSB_CHIPCO_UART0_IMR		0x0304
 #define SSB_CHIPCO_UART0_FCR		0x0308
@@ -197,6 +207,196 @@
 #define SSB_CHIPCO_UART1_LSR		0x0414
 #define SSB_CHIPCO_UART1_MSR		0x0418
 #define SSB_CHIPCO_UART1_SCRATCH	0x041C
+/* PMU registers (rev >= 20) */
+#define SSB_CHIPCO_PMU_CTL			0x0600 /* PMU control */
+#define  SSB_CHIPCO_PMU_CTL_ILP_DIV		0xFFFF0000 /* ILP div mask */
+#define  SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT	16
+#define  SSB_CHIPCO_PMU_CTL_NOILPONW		0x00000200 /* No ILP on wait */
+#define  SSB_CHIPCO_PMU_CTL_HTREQEN		0x00000100 /* HT req enable */
+#define  SSB_CHIPCO_PMU_CTL_ALPREQEN		0x00000080 /* ALP req enable */
+#define  SSB_CHIPCO_PMU_CTL_XTALFREQ		0x0000007C /* Crystal freq */
+#define  SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT	2
+#define  SSB_CHIPCO_PMU_CTL_ILPDIVEN		0x00000002 /* ILP div enable */
+#define  SSB_CHIPCO_PMU_CTL_LPOSEL		0x00000001 /* LPO sel */
+#define SSB_CHIPCO_PMU_CAP			0x0604 /* PMU capabilities */
+#define  SSB_CHIPCO_PMU_CAP_REVISION		0x000000FF /* Revision mask */
+#define SSB_CHIPCO_PMU_STAT			0x0608 /* PMU status */
+#define  SSB_CHIPCO_PMU_STAT_INTPEND		0x00000040 /* Interrupt pending */
+#define  SSB_CHIPCO_PMU_STAT_SBCLKST		0x00000030 /* Backplane clock status? */
+#define  SSB_CHIPCO_PMU_STAT_HAVEALP		0x00000008 /* ALP available */
+#define  SSB_CHIPCO_PMU_STAT_HAVEHT		0x00000004 /* HT available */
+#define  SSB_CHIPCO_PMU_STAT_RESINIT		0x00000003 /* Res init */
+#define SSB_CHIPCO_PMU_RES_STAT			0x060C /* PMU res status */
+#define SSB_CHIPCO_PMU_RES_PEND			0x0610 /* PMU res pending */
+#define SSB_CHIPCO_PMU_TIMER			0x0614 /* PMU timer */
+#define SSB_CHIPCO_PMU_MINRES_MSK		0x0618 /* PMU min res mask */
+#define SSB_CHIPCO_PMU_MAXRES_MSK		0x061C /* PMU max res mask */
+#define SSB_CHIPCO_PMU_RES_TABSEL		0x0620 /* PMU res table sel */
+#define SSB_CHIPCO_PMU_RES_DEPMSK		0x0624 /* PMU res dep mask */
+#define SSB_CHIPCO_PMU_RES_UPDNTM		0x0628 /* PMU res updown timer */
+#define SSB_CHIPCO_PMU_RES_TIMER		0x062C /* PMU res timer */
+#define SSB_CHIPCO_PMU_CLKSTRETCH		0x0630 /* PMU clockstretch */
+#define SSB_CHIPCO_PMU_WATCHDOG			0x0634 /* PMU watchdog */
+#define SSB_CHIPCO_PMU_RES_REQTS		0x0640 /* PMU res req timer sel */
+#define SSB_CHIPCO_PMU_RES_REQT			0x0644 /* PMU res req timer */
+#define SSB_CHIPCO_PMU_RES_REQM			0x0648 /* PMU res req mask */
+#define SSB_CHIPCO_CHIPCTL_ADDR			0x0650
+#define SSB_CHIPCO_CHIPCTL_DATA			0x0654
+#define SSB_CHIPCO_REGCTL_ADDR			0x0658
+#define SSB_CHIPCO_REGCTL_DATA			0x065C
+#define SSB_CHIPCO_PLLCTL_ADDR			0x0660
+#define SSB_CHIPCO_PLLCTL_DATA			0x0664
+
+
+
+/** PMU PLL registers */
+
+/* PMU rev 0 PLL registers */
+#define SSB_PMU0_PLLCTL0			0
+#define  SSB_PMU0_PLLCTL0_PDIV_MSK		0x00000001
+#define  SSB_PMU0_PLLCTL0_PDIV_FREQ		25000 /* kHz */
+#define SSB_PMU0_PLLCTL1			1
+#define  SSB_PMU0_PLLCTL1_WILD_IMSK		0xF0000000 /* Wild int mask (low nibble) */
+#define  SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT	28
+#define  SSB_PMU0_PLLCTL1_WILD_FMSK		0x0FFFFF00 /* Wild frac mask */
+#define  SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT	8
+#define  SSB_PMU0_PLLCTL1_STOPMOD		0x00000040 /* Stop mod */
+#define SSB_PMU0_PLLCTL2			2
+#define  SSB_PMU0_PLLCTL2_WILD_IMSKHI		0x0000000F /* Wild int mask (high nibble) */
+#define  SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT	0
+
+/* PMU rev 1 PLL registers */
+#define SSB_PMU1_PLLCTL0			0
+#define  SSB_PMU1_PLLCTL0_P1DIV			0x00F00000 /* P1 div */
+#define  SSB_PMU1_PLLCTL0_P1DIV_SHIFT		20
+#define  SSB_PMU1_PLLCTL0_P2DIV			0x0F000000 /* P2 div */
+#define  SSB_PMU1_PLLCTL0_P2DIV_SHIFT		24
+#define SSB_PMU1_PLLCTL1			1
+#define  SSB_PMU1_PLLCTL1_M1DIV			0x000000FF /* M1 div */
+#define  SSB_PMU1_PLLCTL1_M1DIV_SHIFT		0
+#define  SSB_PMU1_PLLCTL1_M2DIV			0x0000FF00 /* M2 div */
+#define  SSB_PMU1_PLLCTL1_M2DIV_SHIFT		8
+#define  SSB_PMU1_PLLCTL1_M3DIV			0x00FF0000 /* M3 div */
+#define  SSB_PMU1_PLLCTL1_M3DIV_SHIFT		16
+#define  SSB_PMU1_PLLCTL1_M4DIV			0xFF000000 /* M4 div */
+#define  SSB_PMU1_PLLCTL1_M4DIV_SHIFT		24
+#define SSB_PMU1_PLLCTL2			2
+#define  SSB_PMU1_PLLCTL2_M5DIV			0x000000FF /* M5 div */
+#define  SSB_PMU1_PLLCTL2_M5DIV_SHIFT		0
+#define  SSB_PMU1_PLLCTL2_M6DIV			0x0000FF00 /* M6 div */
+#define  SSB_PMU1_PLLCTL2_M6DIV_SHIFT		8
+#define  SSB_PMU1_PLLCTL2_NDIVMODE		0x000E0000 /* NDIV mode */
+#define  SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT	17
+#define  SSB_PMU1_PLLCTL2_NDIVINT		0x1FF00000 /* NDIV int */
+#define  SSB_PMU1_PLLCTL2_NDIVINT_SHIFT		20
+#define SSB_PMU1_PLLCTL3			3
+#define  SSB_PMU1_PLLCTL3_NDIVFRAC		0x00FFFFFF /* NDIV frac */
+#define  SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT	0
+#define SSB_PMU1_PLLCTL4			4
+#define SSB_PMU1_PLLCTL5			5
+#define  SSB_PMU1_PLLCTL5_CLKDRV		0xFFFFFF00 /* clk drv */
+#define  SSB_PMU1_PLLCTL5_CLKDRV_SHIFT		8
+
+/* BCM4312 PLL resource numbers. */
+#define SSB_PMURES_4312_SWITCHER_BURST		0
+#define SSB_PMURES_4312_SWITCHER_PWM    	1
+#define SSB_PMURES_4312_PA_REF_LDO		2
+#define SSB_PMURES_4312_CORE_LDO_BURST		3
+#define SSB_PMURES_4312_CORE_LDO_PWM		4
+#define SSB_PMURES_4312_RADIO_LDO		5
+#define SSB_PMURES_4312_ILP_REQUEST		6
+#define SSB_PMURES_4312_BG_FILTBYP		7
+#define SSB_PMURES_4312_TX_FILTBYP		8
+#define SSB_PMURES_4312_RX_FILTBYP		9
+#define SSB_PMURES_4312_XTAL_PU			10
+#define SSB_PMURES_4312_ALP_AVAIL		11
+#define SSB_PMURES_4312_BB_PLL_FILTBYP		12
+#define SSB_PMURES_4312_RF_PLL_FILTBYP		13
+#define SSB_PMURES_4312_HT_AVAIL		14
+
+/* BCM4325 PLL resource numbers. */
+#define SSB_PMURES_4325_BUCK_BOOST_BURST	0
+#define SSB_PMURES_4325_CBUCK_BURST		1
+#define SSB_PMURES_4325_CBUCK_PWM		2
+#define SSB_PMURES_4325_CLDO_CBUCK_BURST	3
+#define SSB_PMURES_4325_CLDO_CBUCK_PWM		4
+#define SSB_PMURES_4325_BUCK_BOOST_PWM		5
+#define SSB_PMURES_4325_ILP_REQUEST		6
+#define SSB_PMURES_4325_ABUCK_BURST		7
+#define SSB_PMURES_4325_ABUCK_PWM		8
+#define SSB_PMURES_4325_LNLDO1_PU		9
+#define SSB_PMURES_4325_LNLDO2_PU		10
+#define SSB_PMURES_4325_LNLDO3_PU		11
+#define SSB_PMURES_4325_LNLDO4_PU		12
+#define SSB_PMURES_4325_XTAL_PU			13
+#define SSB_PMURES_4325_ALP_AVAIL		14
+#define SSB_PMURES_4325_RX_PWRSW_PU		15
+#define SSB_PMURES_4325_TX_PWRSW_PU		16
+#define SSB_PMURES_4325_RFPLL_PWRSW_PU		17
+#define SSB_PMURES_4325_LOGEN_PWRSW_PU		18
+#define SSB_PMURES_4325_AFE_PWRSW_PU		19
+#define SSB_PMURES_4325_BBPLL_PWRSW_PU		20
+#define SSB_PMURES_4325_HT_AVAIL		21
+
+/* BCM4328 PLL resource numbers. */
+#define SSB_PMURES_4328_EXT_SWITCHER_PWM	0
+#define SSB_PMURES_4328_BB_SWITCHER_PWM		1
+#define SSB_PMURES_4328_BB_SWITCHER_BURST	2
+#define SSB_PMURES_4328_BB_EXT_SWITCHER_BURST	3
+#define SSB_PMURES_4328_ILP_REQUEST		4
+#define SSB_PMURES_4328_RADIO_SWITCHER_PWM	5
+#define SSB_PMURES_4328_RADIO_SWITCHER_BURST	6
+#define SSB_PMURES_4328_ROM_SWITCH		7
+#define SSB_PMURES_4328_PA_REF_LDO		8
+#define SSB_PMURES_4328_RADIO_LDO		9
+#define SSB_PMURES_4328_AFE_LDO			10
+#define SSB_PMURES_4328_PLL_LDO			11
+#define SSB_PMURES_4328_BG_FILTBYP		12
+#define SSB_PMURES_4328_TX_FILTBYP		13
+#define SSB_PMURES_4328_RX_FILTBYP		14
+#define SSB_PMURES_4328_XTAL_PU			15
+#define SSB_PMURES_4328_XTAL_EN			16
+#define SSB_PMURES_4328_BB_PLL_FILTBYP		17
+#define SSB_PMURES_4328_RF_PLL_FILTBYP		18
+#define SSB_PMURES_4328_BB_PLL_PU		19
+
+/* BCM5354 PLL resource numbers. */
+#define SSB_PMURES_5354_EXT_SWITCHER_PWM	0
+#define SSB_PMURES_5354_BB_SWITCHER_PWM		1
+#define SSB_PMURES_5354_BB_SWITCHER_BURST	2
+#define SSB_PMURES_5354_BB_EXT_SWITCHER_BURST	3
+#define SSB_PMURES_5354_ILP_REQUEST		4
+#define SSB_PMURES_5354_RADIO_SWITCHER_PWM	5
+#define SSB_PMURES_5354_RADIO_SWITCHER_BURST	6
+#define SSB_PMURES_5354_ROM_SWITCH		7
+#define SSB_PMURES_5354_PA_REF_LDO		8
+#define SSB_PMURES_5354_RADIO_LDO		9
+#define SSB_PMURES_5354_AFE_LDO			10
+#define SSB_PMURES_5354_PLL_LDO			11
+#define SSB_PMURES_5354_BG_FILTBYP		12
+#define SSB_PMURES_5354_TX_FILTBYP		13
+#define SSB_PMURES_5354_RX_FILTBYP		14
+#define SSB_PMURES_5354_XTAL_PU			15
+#define SSB_PMURES_5354_XTAL_EN			16
+#define SSB_PMURES_5354_BB_PLL_FILTBYP		17
+#define SSB_PMURES_5354_RF_PLL_FILTBYP		18
+#define SSB_PMURES_5354_BB_PLL_PU		19
+
+
+
+/** Chip specific Chip-Status register contents. */
+#define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL	0x00000003
+#define SSB_CHIPCO_CHST_4325_DEFCIS_SEL		0 /* OTP is powered up, use def. CIS, no SPROM */
+#define SSB_CHIPCO_CHST_4325_SPROM_SEL		1 /* OTP is powered up, SPROM is present */
+#define SSB_CHIPCO_CHST_4325_OTP_SEL		2 /* OTP is powered up, no SPROM */
+#define SSB_CHIPCO_CHST_4325_OTP_PWRDN		3 /* OTP is powered down, SPROM is present */
+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE	0x00000004
+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE_SHIFT  2
+#define SSB_CHIPCO_CHST_4325_RCAL_VALID		0x00000008
+#define SSB_CHIPCO_CHST_4325_RCAL_VALID_SHIFT	3
+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE		0x000001F0
+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT	4
+#define SSB_CHIPCO_CHST_4325_PMUTOP_2B 		0x00000200 /* 1 for 2b, 0 for to 2a */
 
 
 
@@ -353,11 +553,20 @@
 struct ssb_device;
 struct ssb_serial_port;
 
+/* Data for the PMU, if available.
+ * Check availability with ((struct ssb_chipcommon)->capabilities & SSB_CHIPCO_CAP_PMU)
+ */
+struct ssb_chipcommon_pmu {
+	u8 rev;			/* PMU revision */
+	u32 crystalfreq;	/* The active crystal frequency (in kHz) */
+};
+
 struct ssb_chipcommon {
 	struct ssb_device *dev;
 	u32 capabilities;
 	/* Fast Powerup Delay constant */
 	u16 fast_pwrup_delay;
+	struct ssb_chipcommon_pmu pmu;
 };
 
 static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
@@ -365,6 +574,17 @@ static inline bool ssb_chipco_available(
 	return (cc->dev != NULL);
 }
 
+/* Register access */
+#define chipco_read32(cc, offset)	ssb_read32((cc)->dev, offset)
+#define chipco_write32(cc, offset, val)	ssb_write32((cc)->dev, offset, val)
+
+#define chipco_mask32(cc, offset, mask) \
+		chipco_write32(cc, offset, chipco_read32(cc, offset) & (mask))
+#define chipco_set32(cc, offset, set) \
+		chipco_write32(cc, offset, chipco_read32(cc, offset) | (set))
+#define chipco_maskset32(cc, offset, mask, set) \
+		chipco_write32(cc, offset, (chipco_read32(cc, offset) & (mask)) | (set))
+
 extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
 
 extern void ssb_chipco_suspend(struct ssb_chipcommon *cc);
@@ -406,4 +626,8 @@ extern int ssb_chipco_serial_init(struct
 				  struct ssb_serial_port *ports);
 #endif /* CONFIG_SSB_SERIAL */
 
+/* PMU support */
+extern void ssb_pmu_init(struct ssb_chipcommon *cc);
+
+
 #endif /* LINUX_SSB_CHIPCO_H_ */