Openwrt/package/network/services/hostapd/patches/100-pending_work.patch

166 lines
4.5 KiB
Diff
Raw Normal View History

--- a/src/ap/ieee802_11.c
+++ b/src/ap/ieee802_11.c
@@ -1506,13 +1506,6 @@ static void handle_assoc_cb(struct hosta
int new_assoc = 1;
struct ieee80211_ht_capabilities ht_cap;
- if (!ok) {
- hostapd_logger(hapd, mgmt->da, HOSTAPD_MODULE_IEEE80211,
- HOSTAPD_LEVEL_DEBUG,
- "did not acknowledge association response");
- return;
- }
-
if (len < IEEE80211_HDRLEN + (reassoc ? sizeof(mgmt->u.reassoc_resp) :
sizeof(mgmt->u.assoc_resp))) {
printf("handle_assoc_cb(reassoc=%d) - too short payload "
@@ -1520,11 +1513,6 @@ static void handle_assoc_cb(struct hosta
return;
}
- if (reassoc)
- status = le_to_host16(mgmt->u.reassoc_resp.status_code);
- else
- status = le_to_host16(mgmt->u.assoc_resp.status_code);
-
sta = ap_get_sta(hapd, mgmt->da);
if (!sta) {
printf("handle_assoc_cb: STA " MACSTR " not found\n",
@@ -1532,6 +1520,19 @@ static void handle_assoc_cb(struct hosta
return;
}
+ if (!ok) {
+ hostapd_logger(hapd, mgmt->da, HOSTAPD_MODULE_IEEE80211,
+ HOSTAPD_LEVEL_DEBUG,
+ "did not acknowledge association response");
+ sta->flags &= ~WLAN_STA_ASSOC_REQ_OK;
+ return;
+ }
+
+ if (reassoc)
+ status = le_to_host16(mgmt->u.reassoc_resp.status_code);
+ else
+ status = le_to_host16(mgmt->u.assoc_resp.status_code);
+
if (status != WLAN_STATUS_SUCCESS)
goto fail;
@@ -1830,6 +1831,9 @@ void ieee802_11_rx_from_unknown(struct h
sta = ap_get_sta(hapd, src);
if (sta && (sta->flags & WLAN_STA_ASSOC)) {
+ if (!hapd->conf->wds_sta)
+ return;
+
if (wds && !(sta->flags & WLAN_STA_WDS)) {
wpa_printf(MSG_DEBUG, "Enable 4-address WDS mode for "
"STA " MACSTR " (aid %u)",
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -2661,10 +2661,10 @@ static int wpa_driver_nl80211_capa(struc
drv->data_tx_status = info.data_tx_status;
/*
- * If poll command is supported mac80211 is new enough to
- * have everything we need to not need monitor interfaces.
+ * If poll command and tx status are supported, mac80211 is new enough
+ * to have everything we need to not need monitor interfaces.
*/
- drv->use_monitor = !info.poll_command_supported;
+ drv->use_monitor = !info.poll_command_supported || !info.data_tx_status;
if (drv->device_ap_sme && drv->use_monitor) {
/*
@@ -6392,8 +6392,8 @@ static int wpa_driver_nl80211_hapd_send_
pos = (u8 *) (hdr + 1);
if (qos) {
- /* add an empty QoS header if needed */
- pos[0] = 0;
+ /* Set highest priority in QoS header */
+ pos[0] = 7;
pos[1] = 0;
pos += 2;
}
@@ -7698,6 +7698,10 @@ static int i802_set_wds_sta(void *priv,
}
return i802_set_sta_vlan(priv, addr, name, 0);
} else {
+ if (bridge_ifname)
+ linux_br_del_if(drv->global->ioctl_sock, bridge_ifname,
+ name);
+
i802_set_sta_vlan(priv, addr, bss->ifname, 0);
return wpa_driver_nl80211_if_remove(priv, WPA_IF_AP_VLAN,
name);
@@ -8065,7 +8069,12 @@ static int wpa_driver_nl80211_if_remove(
if (ifindex <= 0)
return -1;
+ nl80211_remove_iface(drv, ifindex);
+
#ifdef HOSTAPD
+ if (type != WPA_IF_AP_BSS)
+ return 0;
+
if (bss->added_if_into_bridge) {
if (linux_br_del_if(drv->global->ioctl_sock, bss->brname,
bss->ifname) < 0)
@@ -8079,13 +8088,6 @@ static int wpa_driver_nl80211_if_remove(
"bridge %s: %s",
bss->brname, strerror(errno));
}
-#endif /* HOSTAPD */
-
- nl80211_remove_iface(drv, ifindex);
-
-#ifdef HOSTAPD
- if (type != WPA_IF_AP_BSS)
- return 0;
if (bss != &drv->first_bss) {
struct i802_bss *tbss;
--- a/src/ap/drv_callbacks.c
+++ b/src/ap/drv_callbacks.c
@@ -672,12 +672,15 @@ static void hostapd_event_eapol_rx(struc
const u8 *data, size_t data_len)
{
struct hostapd_iface *iface = hapd->iface;
+ struct sta_info *sta;
size_t j;
for (j = 0; j < iface->num_bss; j++) {
- if (ap_get_sta(iface->bss[j], src)) {
- hapd = iface->bss[j];
- break;
+ if ((sta = ap_get_sta(iface->bss[j], src))) {
+ if (sta->flags & WLAN_STA_ASSOC) {
+ hapd = iface->bss[j];
+ break;
+ }
}
}
--- a/src/eap_peer/eap.c
+++ b/src/eap_peer/eap.c
@@ -348,6 +348,7 @@ SM_STATE(EAP, METHOD)
{
struct wpabuf *eapReqData;
struct eap_method_ret ret;
+ int min_len = 1;
SM_ENTRY(EAP, METHOD);
if (sm->m == NULL) {
@@ -356,7 +357,9 @@ SM_STATE(EAP, METHOD)
}
eapReqData = eapol_get_eapReqData(sm);
- if (!eap_hdr_len_valid(eapReqData, 1))
+ if (sm->m->vendor == EAP_VENDOR_IETF && sm->m->method == EAP_TYPE_LEAP)
+ min_len = 0; /* LEAP uses EAP-Success without payload */
+ if (!eap_hdr_len_valid(eapReqData, min_len))
return;
/*