Openwrt/target/linux/rb532-2.6/patches/500-Nand.patch

249 lines
6.4 KiB
Diff
Raw Normal View History

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index cfe288a..c528024 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -55,6 +55,12 @@ config MTD_NAND_TOTO
help
Support for NAND flash on Texas Instruments Toto platform.
+config MTD_NAND_RB500
+ tristate "NAND Flash device on RB500 board"
+ depends on MTD_NAND
+ help
+ Support for NAND flash on RB500 platform.
+
config MTD_NAND_IDS
tristate
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 4174202..2be57c1 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.
obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
obj-$(CONFIG_MTD_NAND_TOTO) += toto.o
+obj-$(CONFIG_MTD_NAND_RB500) += rbmipsnand.o
obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
diff --git a/drivers/mtd/nand/rbmipsnand.c b/drivers/mtd/nand/rbmipsnand.c
new file mode 100644
index 0000000..6f7452a
--- /dev/null
+++ b/drivers/mtd/nand/rbmipsnand.c
@@ -0,0 +1,211 @@
+#include <linux/init.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/bootinfo.h>
+//#include <asm/rb/rb100.h>
+
+#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(0x18000000))
+
+#define SMEM1(x) (*((volatile unsigned char *) (KSEG1ADDR(SMEM1_BASE) + x)))
+
+#define GPIOF 0x050000
+#define GPIOC 0x050004
+#define GPIOD 0x050008
+
+#define GPIO_RDY (1 << 0x08)
+#define GPIO_WPX (1 << 0x09)
+#define GPIO_ALE (1 << 0x0a)
+#define GPIO_CLE (1 << 0x0b)
+
+#define NAND_RW_REG 0x0 //data register
+#define NAND_SET_CEn 0x1 //CE# low
+#define NAND_CLR_CEn 0x2 //CE# high
+#define NAND_CLR_CLE 0x3 //CLE low
+#define NAND_SET_CLE 0x4 //CLE high
+#define NAND_CLR_ALE 0x5 //ALE low
+#define NAND_SET_ALE 0x6 //ALE high
+#define NAND_SET_SPn 0x7 //SP# low (use spare area)
+#define NAND_CLR_SPn 0x8 //SP# high (do not use spare area)
+#define NAND_SET_WPn 0x9 //WP# low
+#define NAND_CLR_WPn 0xA //WP# high
+#define NAND_STS_REG 0xB //Status register
+
+#define DEV2BASE 0x010020
+
+#define LO_WPX (1 << 0)
+#define LO_ALE (1 << 1)
+#define LO_CLE (1 << 2)
+#define LO_CEX (1 << 3)
+#define LO_FOFF (1 << 5)
+#define LO_SPICS (1 << 6)
+#define LO_ULED (1 << 7)
+
+#define MEM32(x) *((volatile unsigned *) (x))
+static void __iomem *p_nand;
+
+extern void changeLatchU5(unsigned char orMask, unsigned char nandMask);
+
+static int rb500_dev_ready(struct mtd_info *mtd) {
+ return MEM32(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
+}
+/*
+static int rb100_dev_ready(struct mtd_info *mtd) {
+ return SMEM1(NAND_STS_REG) & 0x80;
+}
+*/
+static unsigned long iflags = 0;
+static int ioff = 0;
+/*
+static void rbmips_hwcontrol400(struct mtd_info *mtd, int cmd) {
+ switch (cmd) {
+ case NAND_CTL_SETCLE:
+ MEM32(IDT434_REG_BASE + GPIOD) |= GPIO_CLE;
+ break;
+ case NAND_CTL_CLRCLE:
+ MEM32(IDT434_REG_BASE + GPIOD) &= ~GPIO_CLE;
+ break;
+ case NAND_CTL_SETALE:
+ MEM32(IDT434_REG_BASE + GPIOD) |= GPIO_ALE;
+ break;
+ case NAND_CTL_CLRALE:
+ MEM32(IDT434_REG_BASE + GPIOD) &= ~GPIO_ALE;
+ break;
+ default:
+ break;
+ }
+}
+*/
+static void rbmips_hwcontrol500(struct mtd_info *mtd, int cmd) {
+ switch (cmd) {
+ case NAND_CTL_SETCLE:
+ changeLatchU5(LO_CLE, 0);
+ break;
+ case NAND_CTL_CLRCLE:
+ changeLatchU5(0, LO_CLE);
+ break;
+ case NAND_CTL_SETALE:
+ changeLatchU5(LO_ALE, 0);
+ break;
+ case NAND_CTL_CLRALE:
+ changeLatchU5(0, LO_ALE);
+ break;
+ default:
+ break;
+ }
+}
+/*
+static void rbmips_hwcontrol100(struct mtd_info *mtd, int cmd){
+ switch(cmd){
+ case NAND_CTL_SETCLE:
+ SMEM1(NAND_SET_CLE) = 0x01;
+ break;
+ case NAND_CTL_CLRCLE:
+ SMEM1(NAND_CLR_CLE) = 0x01;
+ break;
+ case NAND_CTL_SETALE:
+ SMEM1(NAND_SET_ALE) = 0x01;
+ break;
+ case NAND_CTL_CLRALE:
+ SMEM1(NAND_CLR_ALE) = 0x01;
+ break;
+ case NAND_CTL_SETNCE:
+ SMEM1(NAND_SET_CEn) = 0x01;
+ break;
+ case NAND_CTL_CLRNCE:
+ SMEM1(NAND_CLR_CEn) = 0x01;
+ break;
+ }
+}
+*/
+static struct mtd_partition partition_info[] = {
+ {
+ name: "RouterBoard NAND Boot",
+ offset: 0,
+ size: 4 * 1024 * 1024
+ },
+ {
+ name: "RouterBoard NAND Main",
+ offset: MTDPART_OFS_NXTBLK,
+ size: MTDPART_SIZ_FULL
+ }
+};
+
+static struct mtd_info rmtd;
+static struct nand_chip rnand;
+
+static unsigned init_ok = 0;
+
+unsigned get_rbnand_block_size(void) {
+ if (init_ok) return rmtd.oobblock; else return 0;
+}
+
+EXPORT_SYMBOL(get_rbnand_block_size);
+
+int __init rbmips_init(void) {
+ memset(&rmtd, 0, sizeof(rmtd));
+ memset(&rnand, 0, sizeof(rnand));
+/*
+ if (is_rb500()) {
+ if (is_rb400()) {
+ printk("RB400 nand\n");
+ MEM32(IDT434_REG_BASE + GPIOD) |= GPIO_WPX;
+ MEM32(IDT434_REG_BASE + GPIOD) &= ~GPIO_CLE;
+ MEM32(IDT434_REG_BASE + GPIOD) &= ~GPIO_ALE;
+ rnand.hwcontrol = rbmips_hwcontrol400;
+ } else {
+*/
+ printk("RB500 nand\n");
+ changeLatchU5(LO_WPX | LO_FOFF | LO_CEX,
+ LO_ULED | LO_ALE | LO_CLE);
+ rnand.hwcontrol = rbmips_hwcontrol500;
+// }
+
+ rnand.dev_ready = rb500_dev_ready;
+ rnand.IO_ADDR_W = (unsigned char *)
+ KSEG1ADDR(MEM32(IDT434_REG_BASE + DEV2BASE));
+ rnand.IO_ADDR_R = rnand.IO_ADDR_W;
+/* } else if (is_rb100()) {
+ printk("RB100 nand\n");
+ MEM32(0xB2000064) = 0x100;
+ MEM32(0xB2000008) = 0x1;
+ SMEM1(NAND_SET_SPn) = 0x01;
+ SMEM1(NAND_CLR_WPn) = 0x01;
+ rnand.IO_ADDR_R = (unsigned char *)KSEG1ADDR(SMEM1_BASE);
+ rnand.IO_ADDR_W = rnand.IO_ADDR_R;
+ rnand.hwcontrol = rbmips_hwcontrol100;
+ rnand.dev_ready = rb100_dev_ready;
+ }
+*/
+ p_nand = (void __iomem *)ioremap(( void*)0x18a20000, 0x1000);
+ if (!p_nand) {
+ printk("RBnand Unable ioremap buffer");
+ return -ENXIO;
+ }
+ rnand.eccmode = NAND_ECC_SOFT;
+ rnand.chip_delay = 25;
+ rnand.options |= NAND_NO_AUTOINCR;
+ rmtd.priv = &rnand;
+
+ int *b = ( int *)KSEG1ADDR( 0x18010020);
+ printk( "dev2base 0x%08x mask 0x%08x c 0x%08x tc 0x%08x\n", b[ 0], b[ 1], b[ 2], b[ 3]);
+
+ if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)
+ && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) {
+ printk("RBxxx nand device not found");
+ iounmap ((void *)p_nand);
+ return -ENXIO;
+ }
+
+ add_mtd_partitions(&rmtd, partition_info, 2);
+ init_ok = 1;
+ return 0;
+}
+
+module_init(rbmips_init);
+
+
+
+
+