Openwrt/target/linux/layerscape/patches-5.4/820-usb-0004-usb-dwc3-use-suspend-clock-from-dt-to-set-power-down.patch

From 0d4749abb6f7d042643ba1aa27a7388e8290b6f5 Mon Sep 17 00:00:00 2001
From: Li Jun <jun.li@nxp.com>
Date: Tue, 16 Apr 2019 14:02:38 +0800
Subject: [PATCH] usb: dwc3: use suspend clock from dt to set power down scale

Since the new dwc3 use bulk clks including the suspend clk, so we can
use it to calculate the power down scale value.

Acked-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
---
 drivers/usb/dwc3/core.c | 21 +++++++++++++++++++++
 drivers/usb/dwc3/core.h |  1 +
 2 files changed, 22 insertions(+)

--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -900,6 +900,25 @@ static void dwc3_set_incr_burst_type(str
 	dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, cfg);
 }
 
+static void dwc3_set_power_down_clk_scale(struct dwc3 *dwc)
+{
+	u32 reg, scale;
+
+	if (dwc->num_clks == 0)
+		return;
+
+	/*
+	 * The power down scale field specifies how many suspend_clk
+	 * periods fit into a 16KHz clock period. When performing
+	 * the division, round up the remainder.
+	 */
+	scale = DIV_ROUND_UP(clk_get_rate(dwc->clks[2].clk), 16384);
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+	reg &= ~(DWC3_GCTL_PWRDNSCALE_MASK);
+	reg |= DWC3_GCTL_PWRDNSCALE(scale);
+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+}
+
 /**
  * dwc3_core_init - Low-level initialization of DWC3 Core
  * @dwc: Pointer to our controller context structure
@@ -924,6 +943,8 @@ static int dwc3_core_init(struct dwc3 *d
 			dwc->maximum_speed = USB_SPEED_HIGH;
 	}
 
+	dwc3_set_power_down_clk_scale(dwc);
+
 	ret = dwc3_phy_setup(dwc);
 	if (ret)
 		goto err0;
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -224,6 +224,7 @@
 
 /* Global Configuration Register */
 #define DWC3_GCTL_PWRDNSCALE(n)	((n) << 19)
+#define DWC3_GCTL_PWRDNSCALE_MASK	DWC3_GCTL_PWRDNSCALE(0x1fff)
 #define DWC3_GCTL_U2RSTECN	BIT(16)
 #define DWC3_GCTL_RAMCLKSEL(x)	(((x) & DWC3_GCTL_CLK_MASK) << 6)
 #define DWC3_GCTL_CLK_BUS	(0)