Openwrt/target/linux/xburst/patches-2.6.36/800-n516-lpc.patch

511 lines
13 KiB
Diff
Raw Normal View History

2010-10-13 01:55:44 +00:00
From b3c2e7322c09f0ce2f7ba89b7c6fceb6e00c2da0 Mon Sep 17 00:00:00 2001
From: Lars-Peter Clausen <lars@metafoo.de>
Date: Wed, 12 May 2010 14:22:36 +0200
Subject: [PATCH] Add n516 lpc driver
---
drivers/misc/Kconfig | 8 +
drivers/misc/Makefile | 1 +
drivers/misc/n516-lpc.c | 471 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 480 insertions(+), 0 deletions(-)
create mode 100644 drivers/misc/n516-lpc.c
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -390,6 +390,14 @@ config BMP085
To compile this driver as a module, choose M here: the
module will be called bmp085.
+config N516_LPC
+ tristate "N516 keys & power controller"
+ depends on I2C
+ depends on INPUT
+ depends on POWER_SUPPLY
+ help
+ N516 keyboard & power controller driver
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -35,3 +35,4 @@ obj-y += eeprom/
obj-y += cb710/
obj-$(CONFIG_VMWARE_BALLOON) += vmw_balloon.o
obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o
+obj-$(CONFIG_N516_LPC) += n516-lpc.o
--- /dev/null
+++ b/drivers/misc/n516-lpc.c
@@ -0,0 +1,471 @@
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/pm.h>
+#include <linux/sysctl.h>
+#include <linux/proc_fs.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/power_supply.h>
+#include <linux/suspend.h>
+
+#include <linux/i2c.h>
+
+#include <asm/mach-jz4740/irq.h>
+#include <asm/mach-jz4740/gpio.h>
+#include <asm/mach-jz4740/board-n516.h>
+
+static int batt_level=0;
+module_param(batt_level, int, 0);
+
+struct n516_lpc_chip {
+ struct i2c_client *i2c_client;
+ struct input_dev *input;
+ unsigned int battery_level;
+ unsigned int suspending:1, can_sleep:1;
+};
+
+static struct n516_lpc_chip *the_lpc;
+
+struct i2c_device_id n516_lpc_i2c_ids[] = {
+ {"LPC524", 0},
+ {},
+};
+
+MODULE_DEVICE_TABLE(i2c, n516_lpc_i2c_ids);
+
+static const unsigned short normal_i2c[] = I2C_ADDRS(0x54);
+
+static const unsigned int n516_lpc_keymap[] = {
+ [0x01] = KEY_4,
+ [0x02] = KEY_3,
+ [0x03] = KEY_2,
+ [0x04] = KEY_1,
+ [0x05] = KEY_0,
+ [0x07] = KEY_9,
+ [0x08] = KEY_8,
+ [0x09] = KEY_7,
+ [0x0a] = KEY_6,
+ [0x0b] = KEY_5,
+ [0x0d] = KEY_PLAYPAUSE,
+ [0x0e] = KEY_MENU,
+ [0x0f] = KEY_SEARCH,
+ [0x10] = KEY_DIRECTION,
+ [0x11] = KEY_SPACE,
+ [0x13] = KEY_ENTER,
+ [0x14] = KEY_UP,
+ [0x15] = KEY_DOWN,
+ [0x16] = KEY_RIGHT,
+ [0x17] = KEY_LEFT,
+ [0x19] = KEY_PAGEDOWN,
+ [0x1a] = KEY_PAGEUP,
+ [0x1c] = KEY_POWER,
+ [0x1d] = KEY_ESC,
+ [0x1e] = KEY_SLEEP,
+ [0x1f] = KEY_WAKEUP,
+};
+
+static const unsigned int batt_charge[] = {0, 7, 20, 45, 65, 80, 100};
+#define MAX_BAT_LEVEL 6
+
+static inline int n516_bat_charging(void)
+{
+ return !gpio_get_value(GPIO_CHARG_STAT_N);
+}
+
+static int n516_bat_get_status(struct power_supply *b)
+{
+ if (power_supply_am_i_supplied(b)) {
+ if (n516_bat_charging())
+ return POWER_SUPPLY_STATUS_CHARGING;
+ else
+ return POWER_SUPPLY_STATUS_FULL;
+ } else {
+ return POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+}
+
+static int n516_bat_get_charge(struct power_supply *b)
+{
+ return batt_charge[the_lpc->battery_level];
+}
+
+static int n516_bat_get_property(struct power_supply *b,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = n516_bat_get_status(b);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ val->intval = 100;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN:
+ val->intval = 0;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ val->intval = n516_bat_get_charge(b);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void n516_bat_power_changed(struct power_supply *p)
+{
+ if (power_supply_am_i_supplied(p) && !n516_bat_charging())
+ the_lpc->battery_level = MAX_BAT_LEVEL;
+
+ power_supply_changed(p);
+}
+
+static enum power_supply_property n516_bat_properties[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+};
+
+static struct power_supply n516_battery = {
+ .name = "n516-battery",
+ .get_property = n516_bat_get_property,
+ .properties = n516_bat_properties,
+ .num_properties = ARRAY_SIZE(n516_bat_properties),
+ .external_power_changed = n516_bat_power_changed,
+};
+
+static irqreturn_t n516_bat_charge_irq(int irq, void *dev)
+{
+ struct power_supply *psy = dev;
+
+ dev_dbg(psy->dev, "Battery charging IRQ\n");
+
+ if (power_supply_am_i_supplied(psy) && !n516_bat_charging())
+ the_lpc->battery_level = MAX_BAT_LEVEL;
+
+ power_supply_changed(psy);
+
+ return IRQ_HANDLED;
+}
+
+static int n516_lpc_send_message(struct n516_lpc_chip *chip, unsigned char val)
+{
+ struct i2c_client *client = chip->i2c_client;
+ struct i2c_msg msg = {client->addr, client->flags, 1, &val};
+ int ret = 0;
+
+ ret = i2c_transfer(client->adapter, &msg, 1);
+ return ret > 0 ? 0 : ret;
+}
+
+static void n516_key_event(struct n516_lpc_chip *chip, unsigned char keycode)
+{
+ struct i2c_client *client = chip->i2c_client;
+ bool long_press = false;
+
+ if (keycode & 0x40) {
+ keycode &= ~0x40;
+ long_press = true;
+ }
+
+ dev_dbg(&client->dev, "keycode: 0x%02x, long_press: 0x%02x\n", keycode, (unsigned int)long_press);
+
+ if (keycode >= ARRAY_SIZE(n516_lpc_keymap) || n516_lpc_keymap[keycode] == 0)
+ return;
+
+ if (long_press)
+ input_report_key(chip->input, KEY_LEFTALT, 1);
+
+ input_report_key(chip->input, n516_lpc_keymap[keycode], 1);
+ input_sync(chip->input);
+ input_report_key(chip->input, n516_lpc_keymap[keycode], 0);
+
+ if (long_press)
+ input_report_key(chip->input, KEY_LEFTALT, 0);
+ input_sync(chip->input);
+}
+
+static void n516_battery_event(struct n516_lpc_chip *chip, unsigned char battery_level)
+{
+ if (battery_level != chip->battery_level) {
+ chip->battery_level = battery_level;
+ power_supply_changed(&n516_battery);
+ }
+}
+
+static irqreturn_t n516_lpc_irq_thread(int irq, void *devid)
+{
+ struct n516_lpc_chip *chip = (struct n516_lpc_chip*)devid;
+ int ret;
+ unsigned char raw_msg;
+ struct i2c_client *client = chip->i2c_client;
+ struct i2c_msg msg = {client->addr, client->flags | I2C_M_RD, 1, &raw_msg};
+
+ if (client->dev.power.status >= DPM_OFF)
+ return IRQ_HANDLED;
+
+ ret = i2c_transfer(client->adapter, &msg, 1);
+ if (ret != 1) {
+ dev_dbg(&client->dev, "I2C error: %d\n", ret);
+ return IRQ_HANDLED;
+ }
+
+ dev_dbg(&client->dev, "msg: 0x%02x\n", raw_msg);
+
+ /* Ack wakeup event */
+ if ((raw_msg & ~0x40) < ARRAY_SIZE(n516_lpc_keymap))
+ n516_key_event(chip, raw_msg);
+ else if ((raw_msg >= 0x81) && (raw_msg <= 0x87))
+ n516_battery_event(chip, raw_msg - 0x81);
+ else if (raw_msg == 0x7e)
+ n516_lpc_send_message(chip, 0x00);
+ else
+ dev_warn(&client->dev, "Unknown message: %x\n", raw_msg);
+
+ if (chip->suspending)
+ chip->can_sleep = 0;
+
+ return IRQ_HANDLED;
+}
+
+static void n516_lpc_power_off(void)
+{
+ struct i2c_client *client = the_lpc->i2c_client;
+ unsigned char val = 0x01;
+ struct i2c_msg msg = {client->addr, client->flags, 1, &val};
+
+ printk("Issue LPC POWEROFF command...\n");
+ while (1)
+ i2c_transfer(client->adapter, &msg, 1);
+}
+
+static int n516_lpc_detect(struct i2c_client *client, struct i2c_board_info *info)
+{
+ return 0;
+}
+
+static int n516_lpc_suspend_notifier(struct notifier_block *nb,
+ unsigned long event,
+ void *dummy)
+{
+ switch(event) {
+ case PM_SUSPEND_PREPARE:
+ the_lpc->suspending = 1;
+ the_lpc->can_sleep = 1;
+ break;
+ case PM_POST_SUSPEND:
+ the_lpc->suspending = 0;
+ the_lpc->can_sleep = 1;
+ break;
+ default:
+ return NOTIFY_DONE;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block n516_lpc_notif_block = {
+ .notifier_call = n516_lpc_suspend_notifier,
+};
+
+static int __devinit n516_lpc_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct n516_lpc_chip *chip;
+ struct input_dev *input;
+ int ret = 0;
+ int i;
+
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ the_lpc = chip;
+ chip->i2c_client = client;
+ if ((batt_level > 0) && (batt_level < ARRAY_SIZE(batt_charge)))
+ chip->battery_level = batt_level;
+ else
+ chip->battery_level = 1;
+
+ i2c_set_clientdata(client, chip);
+
+ ret = gpio_request(GPIO_LPC_INT, "LPC interrupt request");
+ if (ret) {
+ dev_err(&client->dev, "Unable to reguest LPC INT GPIO\n");
+ goto err_gpio_req_lpcint;
+ }
+
+ ret = gpio_request(GPIO_CHARG_STAT_N, "LPC charging status");
+ if (ret) {
+ dev_err(&client->dev, "Unable to reguest CHARG STAT GPIO\n");
+ goto err_gpio_req_chargstat;
+ }
+
+ /* Enter normal mode */
+ n516_lpc_send_message(chip, 0x2);
+
+ input = input_allocate_device();
+ if (!input) {
+ dev_err(&client->dev, "Unable to allocate input device\n");
+ ret = -ENOMEM;
+ goto err_input_alloc;
+ }
+
+ chip->input = input;
+
+ __set_bit(EV_KEY, input->evbit);
+
+ for (i = 0; i < ARRAY_SIZE(n516_lpc_keymap); i++)
+ __set_bit(n516_lpc_keymap[i], input->keybit);
+
+ __set_bit(KEY_LEFTALT, input->keybit);
+
+ input->name = "n516-keys";
+ input->phys = "n516-keys/input0";
+ input->dev.parent = &client->dev;
+ input->id.bustype = BUS_I2C;
+ input->id.vendor = 0x0001;
+ input->id.product = 0x0001;
+ input->id.version = 0x0100;
+
+ ret = input_register_device(input);
+ if (ret < 0) {
+ dev_err(&client->dev, "Unable to register input device\n");
+ goto err_input_register;
+ }
+
+ ret = power_supply_register(NULL, &n516_battery);
+ if (ret) {
+ dev_err(&client->dev, "Unable to register N516 battery\n");
+ goto err_bat_reg;
+ }
+
+ ret = request_threaded_irq(gpio_to_irq(GPIO_LPC_INT), NULL,
+ n516_lpc_irq_thread,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "lpc", chip);
+ if (ret) {
+ dev_err(&client->dev, "request_irq failed: %d\n", ret);
+ goto err_request_lpc_irq;
+ }
+
+ ret = request_irq(gpio_to_irq(GPIO_CHARG_STAT_N), n516_bat_charge_irq,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "battery charging", &n516_battery);
+ if (ret) {
+ dev_err(&client->dev, "Unable to claim battery charging IRQ\n");
+ goto err_request_chrg_irq;
+ }
+
+ pm_power_off = n516_lpc_power_off;
+ ret = register_pm_notifier(&n516_lpc_notif_block);
+ if (ret) {
+ dev_err(&client->dev, "Unable to register PM notify block\n");
+ goto err_reg_pm_notifier;
+ }
+
+ device_init_wakeup(&client->dev, 1);
+
+ return 0;
+
+ unregister_pm_notifier(&n516_lpc_notif_block);
+err_reg_pm_notifier:
+ free_irq(gpio_to_irq(GPIO_CHARG_STAT_N), &n516_battery);
+err_request_chrg_irq:
+ free_irq(gpio_to_irq(GPIO_LPC_INT), chip);
+err_request_lpc_irq:
+ power_supply_unregister(&n516_battery);
+err_bat_reg:
+ input_unregister_device(input);
+err_input_register:
+ input_free_device(input);
+err_input_alloc:
+ gpio_free(GPIO_CHARG_STAT_N);
+err_gpio_req_chargstat:
+ gpio_free(GPIO_LPC_INT);
+err_gpio_req_lpcint:
+ i2c_set_clientdata(client, NULL);
+ kfree(chip);
+
+ return ret;
+}
+
+static int __devexit n516_lpc_remove(struct i2c_client *client)
+{
+ struct n516_lpc_chip *chip = i2c_get_clientdata(client);
+
+ unregister_pm_notifier(&n516_lpc_notif_block);
+ pm_power_off = NULL;
+ free_irq(gpio_to_irq(GPIO_CHARG_STAT_N), &n516_battery);
+ free_irq(gpio_to_irq(GPIO_LPC_INT), chip);
+ power_supply_unregister(&n516_battery);
+ input_unregister_device(chip->input);
+ gpio_free(GPIO_CHARG_STAT_N);
+ gpio_free(GPIO_LPC_INT);
+ i2c_set_clientdata(client, NULL);
+ kfree(chip);
+
+ return 0;
+}
+
+#if CONFIG_PM
+static int n516_lpc_suspend(struct i2c_client *client, pm_message_t msg)
+{
+ if (!the_lpc->can_sleep)
+ return -EBUSY;
+
+ if (device_may_wakeup(&client->dev))
+ enable_irq_wake(gpio_to_irq(GPIO_LPC_INT));
+
+ return 0;
+}
+
+static int n516_lpc_resume(struct i2c_client *client)
+{
+ if (device_may_wakeup(&client->dev))
+ disable_irq_wake(gpio_to_irq(GPIO_LPC_INT));
+
+ return 0;
+}
+#else
+#define n516_lpc_suspend NULL
+#define n516_lpc_resume NULL
+#endif
+
+
+static struct i2c_driver n516_lpc_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "n516-keys",
+ .owner = THIS_MODULE,
+ },
+ .probe = n516_lpc_probe,
+ .remove = __devexit_p(n516_lpc_remove),
+ .detect = n516_lpc_detect,
+ .id_table = n516_lpc_i2c_ids,
+ .address_list = normal_i2c,
+ .suspend = n516_lpc_suspend,
+ .resume = n516_lpc_resume,
+};
+
+static int __init n516_lpc_init(void)
+{
+ return i2c_add_driver(&n516_lpc_driver);
+}
+module_init(n516_lpc_init);
+
+static void __exit n516_lpc_exit(void)
+{
+ i2c_del_driver(&n516_lpc_driver);
+}
+module_exit(n516_lpc_exit);
+
+MODULE_AUTHOR("Yauhen Kharuzhy");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Keys and power controller driver for N516");
+MODULE_ALIAS("platform:n516-keys");