Openwrt/target/linux/layerscape/patches-5.4/701-net-0284-net-fsl_ppfe-dts-binding-for-ppfe.patch

From 08861b67c94a28e3a1bbcfb04a141ab0eafa5dac Mon Sep 17 00:00:00 2001
From: Calvin Johnson <calvin.johnson@nxp.com>
Date: Sat, 16 Sep 2017 07:05:49 +0530
Subject: [PATCH] net: fsl_ppfe: dts binding for ppfe

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
---
 .../devicetree/bindings/net/fsl_ppfe/pfe.txt       | 173 +++++++++++++++++++++
 1 file changed, 173 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt

--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt
@@ -0,0 +1,173 @@
+=============================================================================
+NXP Programmable Packet Forwarding Engine Device Bindings
+
+CONTENTS
+  - PFE Node
+  - Ethernet Node
+
+=============================================================================
+PFE Node
+
+DESCRIPTION
+
+PFE Node has all the properties associated with Packet Forwarding Engine block.
+
+PROPERTIES
+
+- compatible
+		Usage: required
+		Value type: <stringlist>
+		Definition: Must include "fsl,pfe"
+
+- reg
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property.
+		Specifies the offset of the following registers:
+		- PFE configuration registers
+		- DDR memory used by PFE
+
+- fsl,pfe-num-interfaces
+		Usage: required
+		Value type: <u32>
+		Definition: Must be present. Value can be either one or two.
+
+- interrupts
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: Three interrupts are specified in this property.
+		- HIF interrupt
+		- HIF NO COPY interrupt
+		- Wake On LAN interrupt
+
+- interrupt-names
+		Usage: required
+		Value type: <stringlist>
+		Definition: Following strings are defined for the 3 interrupts.
+		"pfe_hif" - HIF interrupt
+		"pfe_hif_nocpy" - HIF NO COPY interrupt
+		"pfe_wol" - Wake On LAN interrupt
+
+- memory-region
+		Usage: required
+		Value type: <phandle>
+		Definition: phandle to a node describing reserved memory used by pfe.
+		Refer:- Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+
+- fsl,pfe-scfg
+		Usage: required
+		Value type: <phandle>
+		Definition: phandle for scfg.
+
+- fsl,rcpm-wakeup
+		Usage: required
+		Value type: <phandle>
+		Definition: phandle for rcpm.
+
+- clocks
+		Usage: required
+		Value type: <phandle>
+		Definition: phandle for clockgen.
+
+- clock-names
+		Usage: required
+		Value type: <string>
+		Definition: phandle for clock name.
+
+EXAMPLE
+
+pfe: pfe@04000000 {
+	compatible = "fsl,pfe";
+	reg =   <0x0 0x04000000 0x0 0xc00000>,	/* AXI 16M */
+		<0x0 0x83400000 0x0 0xc00000>;  /* PFE DDR 12M */
+	reg-names = "pfe", "pfe-ddr";
+	fsl,pfe-num-interfaces = <0x2>;
+	interrupts = <0 172 0x4>,    /* HIF interrupt */
+		     <0 173 0x4>,    /*HIF_NOCPY interrupt */
+		     <0 174 0x4>;    /* WoL interrupt */
+	interrupt-names = "pfe_hif", "pfe_hif_nocpy", "pfe_wol";
+	memory-region = <&pfe_reserved>;
+	fsl,pfe-scfg = <&scfg 0>;
+	fsl,rcpm-wakeup = <&rcpm 0xf0000020>;
+	clocks = <&clockgen 4 0>;
+	clock-names = "pfe";
+
+	status = "okay";
+	pfe_mac0: ethernet@0 {
+	};
+
+	pfe_mac1: ethernet@1 {
+	};
+};
+
+=============================================================================
+Ethernet Node
+
+DESCRIPTION
+
+Ethernet Node has all the properties associated with PFE used by platforms to
+connect to PHY:
+
+PROPERTIES
+
+- compatible
+		Usage: required
+		Value type: <stringlist>
+		Definition: Must include "fsl,pfe-gemac-port"
+
+- reg
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property.
+		Specifies the gemacid of the interface.
+
+- fsl,gemac-bus-id
+		Usage: required
+		Value type: <u32>
+		Definition: Must be present. Value should be the id of the bus
+		connected to gemac.
+
+- fsl,gemac-phy-id
+		Usage: required
+		Value type: <u32>
+		Definition: Must be present. Value should be the id of the phy
+		connected to gemac.
+
+- fsl,mdio-mux-val
+		Usage: required
+		Value type: <u32>
+		Definition: Must be present. Value can be either 0 or 2 or 3.
+		This value is used to configure the mux to enable mdio.
+
+- phy-mode
+		Usage: required
+		Value type: <string>
+		Definition: Must include "sgmii"
+
+- fsl,pfe-phy-if-flags
+		Usage: required
+		Value type: <u32>
+		Definition: Must be present. Value should be 0 by default.
+		If there is not phy connected, this need to be 1.
+
+- mdio
+		optional subnode that specifies the mdio bus. This has reg
+		property which is used to enable/disable the mdio bus.
+
+EXAMPLE
+
+ethernet@0 {
+	compatible = "fsl,pfe-gemac-port";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x0>;	/* GEM_ID */
+	fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
+	fsl,gemac-phy-id = <0x2>;	/* PHY_ID */
+	fsl,mdio-mux-val = <0x0>;
+	phy-mode = "sgmii";
+	fsl,pfe-phy-if-flags = <0x0>;
+
+	mdio@0 {
+		reg = <0x1>; /* enabled/disabled */
+	};
+};