Openwrt/target/linux/pxa/patches-2.6.21/009-bkpxa-pxa-cpu.patch

Status: WORKS
PXA CPU enhancements

from patch 1667:
- 64K PTEs
from hh.org-cvs:
- support in pxa_gpio_mode for active low

#
# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
#

--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -474,11 +474,62 @@ ENTRY(cpu_xscale_set_pte_ext)
 	movne	r2, #0				@ no -> fault
 
 	str	r2, [r0]			@ hardware version
+
+	@ We try to map 64K page entries when possible.  
+	@ We do that for kernel space only since the usage pattern from
+	@ the setting of VM area is quite simple.  User space is not worth
+	@ the implied complexity because of ever randomly changing PTEs 
+	@ (page aging, swapout, etc) requiring constant coherency checks.
+	@ Since PTEs are usually set in increasing order, we test the
+	@ possibility for a large page only when given the last PTE of a
+	@ 64K boundary.
+	tsteq	r1, #L_PTE_USER
+	andeq	r1, r0, #(15 << 2)
+	teqeq	r1, #(15 << 2)
+	beq	1f
+
 	mov	ip, #0
 	mcr	p15, 0, r0, c7, c10, 1		@ Clean D cache line
 	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
 	mov	pc, lr
 
+	@ See if we have 16 identical PTEs but with consecutive base addresses
+1:	bic	r3, r2, #0x0000f000
+	mov	r1, #0x0000f000
+2:	eor	r2, r2, r3
+	teq	r2, r1
+	bne	4f
+	subs	r1, r1, #0x00001000
+	ldr	r2, [r0, #-4]!
+	bne	2b
+	eors	r2, r2, r3
+	bne	4f
+
+	@ Now create our LARGE PTE from the current EXT one.
+	bic	r3, r3, #PTE_TYPE_MASK
+	orr	r3, r3, #PTE_TYPE_LARGE
+	and	r2, r3, #0x30			@ EXT_AP --> LARGE_AP0
+	orr	r2, r2, r2, lsl #2		@ add LARGE_AP1
+	orr	r2, r2, r2, lsl #4		@ add LARGE_AP3 + LARGE_AP2
+	and	r1, r3, #0x3c0			@ EXT_TEX
+	bic	r3, r3, #0x3c0
+	orr	r2, r2, r1, lsl #(12 - 6)	@ --> LARGE_TEX
+	orr	r2, r2, r3			@ add remaining bits
+
+	@ then put it in the pagetable
+	mov	r3, r2
+3:	strd	r2, [r0], #8
+	tst	r0, #(15 << 2)
+	bne	3b
+
+	@ Then sync the 2 corresponding cache lines
+	sub	r0, r0, #(16 << 2)
+	mcr	p15, 0, r0, c7, c10, 1		@ Clean D cache line
+4:	orr	r0, r0, #(15 << 2)
+	mcr	p15, 0, r0, c7, c10, 1		@ Clean D cache line
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
+	mov	pc, lr
 
 	.ltorg
 
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -1345,6 +1345,7 @@
 #define GPIO_ALT_FN_2_OUT	0x280
 #define GPIO_ALT_FN_3_IN	0x300
 #define GPIO_ALT_FN_3_OUT	0x380
+#define GPIO_ACTIVE_LOW         0x1000
 #define GPIO_MD_MASK_NR		0x07f
 #define GPIO_MD_MASK_DIR	0x080
 #define GPIO_MD_MASK_FN		0x300
@@ -1597,6 +1598,25 @@
 #define PWER_GPIO15	PWER_GPIO (15)	/* GPIO [15] wake-up enable        */
 #define PWER_RTC	0x80000000	/* RTC alarm wake-up enable        */
 
+#define PWER_GPIO(Nb)	(1 << Nb)	/* GPIO [0..15] wake-up enable     */
+#define PWER_GPIO0	PWER_GPIO (0)	/* GPIO  [0] wake-up enable        */
+#define PWER_GPIO1	PWER_GPIO (1)	/* GPIO  [1] wake-up enable        */
+#define PWER_GPIO2	PWER_GPIO (2)	/* GPIO  [2] wake-up enable        */
+#define PWER_GPIO3	PWER_GPIO (3)	/* GPIO  [3] wake-up enable        */
+#define PWER_GPIO4	PWER_GPIO (4)	/* GPIO  [4] wake-up enable        */
+#define PWER_GPIO5	PWER_GPIO (5)	/* GPIO  [5] wake-up enable        */
+#define PWER_GPIO6	PWER_GPIO (6)	/* GPIO  [6] wake-up enable        */
+#define PWER_GPIO7	PWER_GPIO (7)	/* GPIO  [7] wake-up enable        */
+#define PWER_GPIO8	PWER_GPIO (8)	/* GPIO  [8] wake-up enable        */
+#define PWER_GPIO9	PWER_GPIO (9)	/* GPIO  [9] wake-up enable        */
+#define PWER_GPIO10	PWER_GPIO (10)	/* GPIO [10] wake-up enable        */
+#define PWER_GPIO11	PWER_GPIO (11)	/* GPIO [11] wake-up enable        */
+#define PWER_GPIO12	PWER_GPIO (12)	/* GPIO [12] wake-up enable        */
+#define PWER_GPIO13	PWER_GPIO (13)	/* GPIO [13] wake-up enable        */
+#define PWER_GPIO14	PWER_GPIO (14)	/* GPIO [14] wake-up enable        */
+#define PWER_GPIO15	PWER_GPIO (15)	/* GPIO [15] wake-up enable        */
+#define PWER_RTC	0x80000000	/* RTC alarm wake-up enable        */
+
 
 /*
  * SSP Serial Port Registers