EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
58d2bd88ae
Openwrt/target/linux/mediatek/image/mt7622.mk

61 lines
2.0 KiB
Makefile
Raw Normal View History

mediatek: generate UBI images for the rev board Signed-off-by: John Crispin <john@phrozen.org>
2020-07-16 07:16:34 +00:00
KERNEL_LOADADDR := 0x44080000
mediatek: fix image building Signed-off-by: John Crispin <john@phrozen.org>
2020-05-04 14:28:11 +00:00
mediatek: add latest fixes provided by MTK Signed-off-by: John Crispin <john@phrozen.org>
2020-02-25 16:15:07 +00:00
define Device/bpi_bananapi-r64
DEVICE_VENDOR := Bpi
mediatek: split up DEVICE_TITLE DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT Signed-off-by: Moritz Warning <moritzwarning@web.de>
2019-09-25 21:56:13 +00:00
DEVICE_MODEL := Banana Pi R64
mediatek: add v4.19 support Bump the target to v4.19. Add a patch with additional eth driver fixes/features that MTK provided aswell as the driver for the new mt7530 switch. Signed-off-by: John Crispin <john@phrozen.org>
2019-08-02 08:33:28 +00:00
DEVICE_DTS := mt7622-bananapi-bpi-r64
DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
mediatek: use consistent naming scheme for device nodes This harmonizes the device node names (and thus the image names, too) between subtargets of the mediatek target. So far, each subtarget has somewhat used its own naming scheme. Now, we use the vendor_device syntax there, too. Since DTS names have different patterns and the target only contains a few devices, this does not replace DEVICE_DTS by a calculated default value (like for other targets). SUPPORTED_DEVICES is adjusted based on the node rename where necessary, though it looks like for several older devices it was not set up correctly so far. While at it, this also changes the DTS name for u7623-02-emmc-512m to all-lower-case. Cc: John Crispin <john@phrozen.org> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-14 14:38:51 +00:00
SUPPORTED_DEVICES := bananapi,bpi-r64
kernel: make kmod-ata-core selected by dependent modules Currently kmod-ata-* will not get into images unless kmod-ata-core is added to DEVICE_PACKAGES as well. By changing the dependencies from "depends on" to "select", we do not have the issue anymore. Furthermore, we can remove most occurrences of the package from DEVICE_PACKAGES and similar variables, as it is now pulled by dependent modules such as: - kmod-ata-ahci - kmod-ata-ahci-mtk - kmod-ata-sunxi While at it, use AddDepends/ata for kmod-ata-pdc202xx-old. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-03-05 13:57:29 +00:00
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk
mediatek: add v4.19 support Bump the target to v4.19. Add a patch with additional eth driver fixes/features that MTK provided aswell as the driver for the new mt7530 switch. Signed-off-by: John Crispin <john@phrozen.org>
2019-08-02 08:33:28 +00:00
endef
mediatek: add latest fixes provided by MTK Signed-off-by: John Crispin <john@phrozen.org>
2020-02-25 16:15:07 +00:00
TARGET_DEVICES += bpi_bananapi-r64
mediatke: add support for elecom-wrc-2533gent This commit adds support for the MT7622-based Elecom WRC-2533gent router, with spi-nand storage and 512MB RAM. The device has the following specifications: * MT7622 (arm64 dual-core) * 512MB RAM (DDR3) * 4GB storage (spi-nand) * 5x 1Gbps Ethernet (RTL8337C switch) * 1x UART header * 1x USB 3.0 port * 5x LEDs * 1x reset button * 1x WPS button * 1x slider switch * 1x DC jack for main power (12V) The following has been tested and is working: * Ethernet switch * 2.4g and 5g wifi * USB 3.0 port * sysupgrade * buttons/leds Not working: * bluetooth firmware does not load even though it is present int he rootfs Signed-off-by: John Crispin <john@phrozen.org>
2020-03-27 15:13:06 +00:00
mediatek: add bpi-r64 emmc support Signed-off-by: John Crispin <john@phrozen.org>
2020-06-04 12:26:11 +00:00
define Device/bpi_bananapi-r64-rootdisk
DEVICE_VENDOR := Bpi
DEVICE_MODEL := Banana Pi R64 (rootdisk)
DEVICE_DTS := mt7622-bananapi-bpi-r64-rootdisk
DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
SUPPORTED_DEVICES := bananapi,bpi-r64
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk
IMAGES := sysupgrade-emmc.bin.gz
IMAGE/sysupgrade-emmc.bin.gz := sysupgrade-emmc | gzip | append-metadata
endef
TARGET_DEVICES += bpi_bananapi-r64-rootdisk
mediatek: fix image/mt7622.mk Signed-off-by: John Crispin <john@phrozen.org>
2020-06-07 18:59:17 +00:00
define Device/elecom_wrc-2533gent
mediatke: add support for elecom-wrc-2533gent This commit adds support for the MT7622-based Elecom WRC-2533gent router, with spi-nand storage and 512MB RAM. The device has the following specifications: * MT7622 (arm64 dual-core) * 512MB RAM (DDR3) * 4GB storage (spi-nand) * 5x 1Gbps Ethernet (RTL8337C switch) * 1x UART header * 1x USB 3.0 port * 5x LEDs * 1x reset button * 1x WPS button * 1x slider switch * 1x DC jack for main power (12V) The following has been tested and is working: * Ethernet switch * 2.4g and 5g wifi * USB 3.0 port * sysupgrade * buttons/leds Not working: * bluetooth firmware does not load even though it is present int he rootfs Signed-off-by: John Crispin <john@phrozen.org>
2020-03-27 15:13:06 +00:00
DEVICE_VENDOR := Elecom
mediatek: fix elecom board name menuconfig was showing the the company name twice. Signed-off-by: John Crispin <john@phrozen.org>
2020-04-03 09:18:26 +00:00
DEVICE_MODEL := WRC-2533GENT
mediatke: add support for elecom-wrc-2533gent This commit adds support for the MT7622-based Elecom WRC-2533gent router, with spi-nand storage and 512MB RAM. The device has the following specifications: * MT7622 (arm64 dual-core) * 512MB RAM (DDR3) * 4GB storage (spi-nand) * 5x 1Gbps Ethernet (RTL8337C switch) * 1x UART header * 1x USB 3.0 port * 5x LEDs * 1x reset button * 1x WPS button * 1x slider switch * 1x DC jack for main power (12V) The following has been tested and is working: * Ethernet switch * 2.4g and 5g wifi * USB 3.0 port * sysupgrade * buttons/leds Not working: * bluetooth firmware does not load even though it is present int he rootfs Signed-off-by: John Crispin <john@phrozen.org>
2020-03-27 15:13:06 +00:00
DEVICE_DTS := mt7622-elecom-wrc-2533gent
DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
mediatek: tidy up image subtarget Makefiles - sort device recipes alphabetically - adjust board name of ELECOM WRC-2533GENT - harmonize line wrapping Signed-off-by: Sungbo Eo <mans0n@gorani.run> [rebased] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-05-29 11:49:44 +00:00
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-mt7615e \
kmod-mt7615-firmware mt7622bt-firmware swconfig
mediatke: add support for elecom-wrc-2533gent This commit adds support for the MT7622-based Elecom WRC-2533gent router, with spi-nand storage and 512MB RAM. The device has the following specifications: * MT7622 (arm64 dual-core) * 512MB RAM (DDR3) * 4GB storage (spi-nand) * 5x 1Gbps Ethernet (RTL8337C switch) * 1x UART header * 1x USB 3.0 port * 5x LEDs * 1x reset button * 1x WPS button * 1x slider switch * 1x DC jack for main power (12V) The following has been tested and is working: * Ethernet switch * 2.4g and 5g wifi * USB 3.0 port * sysupgrade * buttons/leds Not working: * bluetooth firmware does not load even though it is present int he rootfs Signed-off-by: John Crispin <john@phrozen.org>
2020-03-27 15:13:06 +00:00
endef
mediatek: tidy up image subtarget Makefiles - sort device recipes alphabetically - adjust board name of ELECOM WRC-2533GENT - harmonize line wrapping Signed-off-by: Sungbo Eo <mans0n@gorani.run> [rebased] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-05-29 11:49:44 +00:00
TARGET_DEVICES += elecom_wrc-2533gent
define Device/mediatek_mt7622-rfb1
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MTK7622 rfb1 AP
DEVICE_DTS := mt7622-rfb1
DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk
endef
TARGET_DEVICES += mediatek_mt7622-rfb1
mediatek: generate UBI images for the rev board Signed-off-by: John Crispin <john@phrozen.org>
2020-07-16 07:16:34 +00:00
define Device/mediatek_mt7622-ubi
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MTK7622 AP (UBI)
DEVICE_DTS := mt7622-rfb1-ubi
DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 4194304
IMAGE_SIZE := 32768k
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk
endef
TARGET_DEVICES += mediatek_mt7622-ubi
Reference in New Issue Copy Permalink