EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
4abcae7a1c
Openwrt/target/linux/brcm63xx/patches-3.10/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch

57 lines
1.7 KiB
Diff
Raw Normal View History

brcm63xx: improve BCM6318 support Provide clock toggling for the USB host and slave controller as well as for the Ethernet Switch. The bcm63xx_enetsw driver is changed not to use request_mem_region() as the Roboswitch register overlaps with the Roboswitch IUDMA channels, hence making the driver return -EBUSY. A future fix might be to use variable size RSET_ENETSW sizes depending on the chip we are targetting. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39282
2014-01-14 05:23:39 +00:00
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -136,7 +136,11 @@ static struct clk clk_ephy = {
*/
static void enetsw_set(struct clk *clk, int enable)
{
- if (BCMCPU_IS_6328())
+ if (BCMCPU_IS_6318()) {
+ bcm_hwclock_set(CKCTL_6318_ROBOSW250_EN |
+ CKCTL_6318_ROBOSW025_EN, enable);
+ bcm_ub_hwclock_set(UB_CKCTL_6318_ROBOSW_EN, enable);
+ } else if (BCMCPU_IS_6328())
bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable);
else if (BCMCPU_IS_6362())
bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable);
brcm63xx: prevent usb clock state inconsistency on BCM6318 Return the same clock for usbh and usbd on BCM6318 to prevent the clock getting disabled despite being supposed to be enabled, e.g. by the following sequence: clk_enable(usbh); <- usbh->usage = 1, enabled clk_enable(usbd); <- usbd->usage = 1, enabled (no effect) clk_disable(usbd); <- usbd->usage = 0, -> disabled! Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39321
2014-01-19 13:45:42 +00:00
@@ -183,18 +187,22 @@ static struct clk clk_pcm = {
brcm63xx: improve BCM6318 support Provide clock toggling for the USB host and slave controller as well as for the Ethernet Switch. The bcm63xx_enetsw driver is changed not to use request_mem_region() as the Roboswitch register overlaps with the Roboswitch IUDMA channels, hence making the driver return -EBUSY. A future fix might be to use variable size RSET_ENETSW sizes depending on the chip we are targetting. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39282
2014-01-14 05:23:39 +00:00
*/
static void usbh_set(struct clk *clk, int enable)
{
- if (BCMCPU_IS_6328())
brcm63xx: prevent usb clock state inconsistency on BCM6318 Return the same clock for usbh and usbd on BCM6318 to prevent the clock getting disabled despite being supposed to be enabled, e.g. by the following sequence: clk_enable(usbh); <- usbh->usage = 1, enabled clk_enable(usbd); <- usbd->usage = 1, enabled (no effect) clk_disable(usbd); <- usbd->usage = 0, -> disabled! Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39321
2014-01-19 13:45:42 +00:00
+ if (BCMCPU_IS_6318()) {
+ bcm_hwclock_set(CKCTL_6318_USB_EN, enable);
+ bcm_ub_hwclock_set(UB_CKCTL_6318_USB_EN, enable);
+ } else if (BCMCPU_IS_6328()) {
brcm63xx: improve BCM6318 support Provide clock toggling for the USB host and slave controller as well as for the Ethernet Switch. The bcm63xx_enetsw driver is changed not to use request_mem_region() as the Roboswitch register overlaps with the Roboswitch IUDMA channels, hence making the driver return -EBUSY. A future fix might be to use variable size RSET_ENETSW sizes depending on the chip we are targetting. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39282
2014-01-14 05:23:39 +00:00
bcm_hwclock_set(CKCTL_6328_USBH_EN, enable);
brcm63xx: prevent usb clock state inconsistency on BCM6318 Return the same clock for usbh and usbd on BCM6318 to prevent the clock getting disabled despite being supposed to be enabled, e.g. by the following sequence: clk_enable(usbh); <- usbh->usage = 1, enabled clk_enable(usbd); <- usbd->usage = 1, enabled (no effect) clk_disable(usbd); <- usbd->usage = 0, -> disabled! Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39321
2014-01-19 13:45:42 +00:00
- else if (BCMCPU_IS_6348())
+ } else if (BCMCPU_IS_6348()) {
brcm63xx: improve BCM6318 support Provide clock toggling for the USB host and slave controller as well as for the Ethernet Switch. The bcm63xx_enetsw driver is changed not to use request_mem_region() as the Roboswitch register overlaps with the Roboswitch IUDMA channels, hence making the driver return -EBUSY. A future fix might be to use variable size RSET_ENETSW sizes depending on the chip we are targetting. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 39282
2014-01-14 05:23:39 +00:00
bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
brcm63xx: prevent usb clock state inconsistency on BCM6318 Return the same clock for usbh and usbd on BCM6318 to prevent the clock getting disabled despite being supposed to be enabled, e.g. by the following sequence: clk_enable(usbh); <- usbh->usage = 1, enabled clk_enable(usbd); <- usbd->usage = 1, enabled (no effect) clk_disable(usbd); <- usbd->usage = 0, -> disabled! Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39321
2014-01-19 13:45:42 +00:00
- else if (BCMCPU_IS_6362())
+ } else if (BCMCPU_IS_6362()) {
bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
- else if (BCMCPU_IS_6368())
+ } else if (BCMCPU_IS_6368()) {
bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
- else if (BCMCPU_IS_63268())
+ } else if (BCMCPU_IS_63268()) {
bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
- else
+ } else {
return;
+ }
if (enable)
msleep(100);
@@ -393,9 +401,9 @@ struct clk *clk_get(struct device *dev,
return &clk_enetsw;
if (!strcmp(id, "ephy"))
return &clk_ephy;
- if (!strcmp(id, "usbh"))
+ if (!strcmp(id, "usbh") || (BCMCPU_IS_6318() && !strcmp(id, "usbd")))
return &clk_usbh;
- if (!strcmp(id, "usbd"))
+ if (!strcmp(id, "usbd") && !BCMCPU_IS_6318())
return &clk_usbd;
if (!strcmp(id, "spi"))
return &clk_spi;
Reference in New Issue Copy Permalink