EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
45d2d4e65a
Openwrt/target/linux/kirkwood/config-5.4

282 lines
6.8 KiB
Groff
Raw Normal View History

kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
CONFIG_ALIGNMENT_TRAP=y
kirkwood: initial refresh 5.4 config Refreshed kernel config with updated NAND config. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:48:33 +00:00
CONFIG_ARCH_32BIT_OFF_T=y
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
kirkwood: initial refresh 5.4 config Refreshed kernel config with updated NAND config. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:48:33 +00:00
CONFIG_ARCH_KEEP_MEMBLOCK=y
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MULTIPLATFORM=y
CONFIG_ARCH_MULTI_CPU_AUTO=y
# CONFIG_ARCH_MULTI_V4 is not set
# CONFIG_ARCH_MULTI_V4T is not set
CONFIG_ARCH_MULTI_V4_V5=y
CONFIG_ARCH_MULTI_V5=y
CONFIG_ARCH_MVEBU=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM=y
kirkwood: initial refresh 5.4 config Refreshed kernel config with updated NAND config. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:48:33 +00:00
# CONFIG_ARMADA_37XX_WATCHDOG is not set
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
# CONFIG_ARMADA_THERMAL is not set
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
CONFIG_ARM_HAS_SG_CHAIN=y
# CONFIG_ARM_KIRKWOOD_CPUIDLE is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
# CONFIG_ARM_MVEBU_V7_CPUIDLE is not set
CONFIG_ARM_PATCH_PHYS_VIRT=y
# CONFIG_ARM_THUMB is not set
kirkwood: initial refresh 5.4 config Refreshed kernel config with updated NAND config. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:48:33 +00:00
CONFIG_ARM_UNWIND=y
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
CONFIG_ATA=y
CONFIG_ATAGS=y
CONFIG_ATA_LEDS=y
CONFIG_AUTO_ZRELADDR=y
kirkwood: initial refresh 5.4 config Refreshed kernel config with updated NAND config. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:48:33 +00:00
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_CACHE_FEROCEON_L2=y
# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMMON_CLK=y
kirkwood: initial refresh 5.4 config Refreshed kernel config with updated NAND config. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:48:33 +00:00
CONFIG_COMPAT_32BIT_TIME=y
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_FEROCEON=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_FEROCEON=y
# CONFIG_CPU_FEROCEON_OLD_ID is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_PM=y
CONFIG_CPU_THUMB_CAPABLE=y
CONFIG_CPU_TLB_FEROCEON=y
CONFIG_CPU_USE_DOMAINS=y
CONFIG_CRC16=y
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_SLICEBY8=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_DEV_MARVELL_CESA=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
kirkwood: initial refresh 5.4 config Refreshed kernel config with updated NAND config. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:48:33 +00:00
CONFIG_CRYPTO_HASH_INFO=y
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
CONFIG_CRYPTO_HW=y
kirkwood: initial refresh 5.4 config Refreshed kernel config with updated NAND config. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:48:33 +00:00
CONFIG_CRYPTO_LIB_DES=y
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_RNG2=y
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
CONFIG_DEBUG_MVEBU_UART0_ALTERNATE=y
# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
CONFIG_DEBUG_UART_8250=y
# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
CONFIG_DEBUG_UART_8250_SHIFT=2
# CONFIG_DEBUG_UART_8250_WORD is not set
CONFIG_DEBUG_UART_PHYS=0xf1012000
CONFIG_DEBUG_UART_VIRT=0xfed12000
CONFIG_DEBUG_UNCOMPRESS=y
# CONFIG_DLCI is not set
kirkwood: initial refresh 5.4 config Refreshed kernel config with updated NAND config. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:48:33 +00:00
CONFIG_DMA_REMAP=y
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
CONFIG_DNOTIFY=y
CONFIG_DTC=y
# CONFIG_EARLY_PRINTK is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
kirkwood: initial refresh 5.4 config Refreshed kernel config with updated NAND config. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:48:33 +00:00
CONFIG_FORCE_PCI=y
CONFIG_FW_LOADER_PAGED_BUF=y
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
kirkwood: refresh kernel config Refresh config with make kernel_oldconfig. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-12-25 11:16:41 +00:00
CONFIG_GENERIC_PINCONF=y
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GLOB=y
CONFIG_GPIOLIB=y
kirkwood: refresh kernel config Refresh config with make kernel_oldconfig. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-12-25 11:16:41 +00:00
CONFIG_GPIOLIB_IRQCHIP=y
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
CONFIG_GPIO_MVEBU=y
kirkwood: refresh kernel config It was made by running "make kernel_oldconfig". Suggested-by: Sungbo Eo <mans0n@gorani.run> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-05-02 19:26:22 +00:00
CONFIG_GRO_CELLS=y
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HZ_FIXED=0
CONFIG_HZ_PERIODIC=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MV64XXX=y
# CONFIG_I2C_PXA is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_KIRKWOOD_CLK=y
CONFIG_KIRKWOOD_THERMAL=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_NETXBIG=y
CONFIG_LEDS_NS2=y
CONFIG_LIBFDT=y
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MACH_KIRKWOOD=y
CONFIG_MACH_MVEBU_ANY=y
CONFIG_MANGLE_BOOTARGS=y
kirkwood: add support for Zyxel NSA310S Zyxel NSA310S is a NAS based on Marvell kirkwood SoC. Specification: - Processor Marvell 88F6702 1 GHz - 256MB RAM - 128MB NAND - 1x GBE LAN port (PHY: Marvell 88E1318) - 2x USB 2.0 - 1x SATA - 3x button - 7x leds - serial on J1 connector (115200 8N1) (GND-NOPIN-RX-TX-VCC) Known issues: - no kernel module for RTC. [*] - buzzer (connected to MPP43) need to be drived by 1kHz signal - no kernel module for internal MCU connected via I2C[**] [*] Karoly Pocsi made simple, unofficial driver for HT1382. It can be found here: https://www.madadmin.com/zyxel-nsa320s-es-debian-linux-4-resz/ [**] Karoly Pocsi found how CPU talk with MCU: It is possible to query the MCU-controlled fan speed and temperature: i2cget -y 0x0 0x0a 0x07 i2cget -y 0x0 0x0a 0x08 The first value (0x07) is the temperature in ° C, the second (0x08) is the time in milliseconds to complete one fan revolution (rpm = 60,000 / value). Info translated from: https://www.madadmin.com/zyxel-nsa320s-es-debian-linux-4-resz/ Installation: TFTP: 1. Run serial console and go to u-boot. 2. Copy u-boot via tftp and write to NAND: => mw 0x0800000 0xffff 0x100000 => nand erase 0x0 100000 => setenv ipaddr 192.168.1.2 => setenv serverip 192.168.1.4 => tftp 0x0800000 nsa310s-u-boot.kwb => nand write 0x0800000 0x0 0x100000 => reset 3. Run new u-Boot, repair bootcmd and restore MAC address from sticker => setenv ethaddr AA:BB:CC:DD:EE:FF => saveenv 4. Copy and run initramfs image => setenv ipaddr 192.168.1.2 => setenv serverip 192.168.1.4 => tftpboot zyxel_nsa310s-initramfs-uImage => bootm 0x800000 5. Download sysupgrade image and perform sysupgrade USB: 1. Prepare usb fat32 drive with u-boot.kwb and initramfs image. Stick it to USB 2.0 port. 2. Run serial console and go to u-boot. 3. Copy u-boot from usb and write to NAND: => mw 0x0800000 0xffff 0x100000 => nand erase 0x0 100000 => usb start => fatload usb 0 0x0800000 u-boot.kwb => nand write 0x0800000 0x0 0x100000 => reset 4. Run new u-Boot, repair bootcmd and restore MAC address from sticker => setenv ethaddr AA:BB:CC:DD:EE:FF => saveenv 5. Copy and run initramfs image: => usb start => fatload usb 0 0x0800000 initramfs-uImage => bootm 0x800000 6. Download sysupgrade image and perform sysupgrade. Based on work ThBexx <thomas.beckler@hotmail.com> DTS based on dropped support in 0ebdf0c. Tested-by: Lech Perczak <lech.perczak@gmail.com> Reviewed-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [NSA310s -> NSA310S in DEVICE_MODEL] Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-05-02 13:33:14 +00:00
CONFIG_MARVELL_PHY=y
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MEMFD_CREATE=y
CONFIG_MIGRATION=y
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MTD_CFI is not set
CONFIG_MTD_CMDLINE_PARTS=y
kirkwood: initial refresh 5.4 config Refreshed kernel config with updated NAND config. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:48:33 +00:00
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
# CONFIG_MTD_NAND_MARVELL is not set
CONFIG_MTD_NAND_ORION=y
kirkwood: initial refresh 5.4 config Refreshed kernel config with updated NAND config. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:48:33 +00:00
CONFIG_MTD_RAW_NAND=y
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MV643XX_ETH=y
CONFIG_MVEBU_CLK_COMMON=y
CONFIG_MVEBU_MBUS=y
CONFIG_MVMDIO=y
# CONFIG_MVNETA is not set
# CONFIG_MVPP2 is not set
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_KUSER_HELPERS=y
CONFIG_NEED_PER_CPU_KM=y
kirkwood: switch from swconfig to dsa This patch removes support for swconfig and switches to dsa driver. swconfig and switch drivers are removed. DSA driver is enabled and configuration is adjusted. In kirkwood only two devices have switches: Linksys EA3500 and EA4500. WAN MAC configuration in 02_network is required because otherwise WAN would have the same MAC address as lan interfaces. In swconfig solution the WAN address was assigned in u-Boot to eth1. Now, as eth1 is disabled and wan is part of the switch, we have to set it manually. Compile tested: EA3500, EA4500 Run tested: EA4500 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [minor commit title/message adjustments, remove swconfig package for devices] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-04-20 08:06:36 +00:00
CONFIG_NET_DEVLINK=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_SWITCHDEV=y
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
CONFIG_NLS=y
CONFIG_NVMEM=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_KOBJ=y
CONFIG_OF_MDIO=y
CONFIG_OF_NET=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_ORION_IRQCHIP=y
CONFIG_ORION_TIMER=y
CONFIG_ORION_WATCHDOG=y
CONFIG_OUTER_CACHE=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PCI=y
kirkwood: initial refresh 5.4 config Refreshed kernel config with updated NAND config. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:48:33 +00:00
CONFIG_PCI_BRIDGE_EMUL=y
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_MVEBU=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
kirkwood: switch from swconfig to dsa This patch removes support for swconfig and switches to dsa driver. swconfig and switch drivers are removed. DSA driver is enabled and configuration is adjusted. In kirkwood only two devices have switches: Linksys EA3500 and EA4500. WAN MAC configuration in 02_network is required because otherwise WAN would have the same MAC address as lan interfaces. In swconfig solution the WAN address was assigned in u-Boot to eth1. Now, as eth1 is disabled and wan is part of the switch, we have to set it manually. Compile tested: EA3500, EA4500 Run tested: EA4500 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [minor commit title/message adjustments, remove swconfig package for devices] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-04-20 08:06:36 +00:00
CONFIG_PHYLINK=y
kirkwood: initial refresh 5.4 config Refreshed kernel config with updated NAND config. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:48:33 +00:00
# CONFIG_PHY_MVEBU_A3700_UTMI is not set
# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
CONFIG_PHY_MVEBU_SATA=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_KIRKWOOD=y
CONFIG_PINCTRL_MVEBU=y
# CONFIG_PINCTRL_SINGLE is not set
kirkwood: add support for Check Point L-50 This patch adds support for the Check Point L-50 from 600/1100 series routers. Specification: -CPU: Marvell Kirkwood 88F6281 1200MHz -RAM: 512MB -Flash: NAND 512MB -WiFi: mPCIe card based on Atheros AR9287 b/g/n -WAN: 1 Gigabit Port (Marvell 88E1116R PHY) -LAN: 9 Gigabit Ports (2x Marvell 88E6171(5+4)) -USB: 2x USB2.0 -Express card slot -SD card slot -Serial console: RJ-45 115200 8n1 -Unsupported DSL Known issues: -DSL not supported -Expresscard not tested Installation: Step one -> backup: make backup u-boot and env for revert stock posibility make backup dsl_mac_addr, dmz_mac_addr, eth1addr, ethaddr and all lanX_mac_addr Step two -> Use kwboot tool to upload openwrt u-boot to RAM: run kwboot: "kwboot -B 115200 /dev/ttyUSB0 -b u-boot.kwb -p -t" end start u-boot Step three -> Restore macs (e.g. below): setenv eth1addr 00:1C:XX:XX:XX:6C setenv ethaddr 00:1C:XX:XX:XX:6B setenv lan1_mac_addr 00:1C:XX:XX:XX:6C setenv lan2_mac_addr 00:1C:XX:XX:XX:6D setenv lan3_mac_addr 00:1C:XX:XX:XX:6E setenv lan4_mac_addr 00:1C:XX:XX:XX:6F setenv lan5_mac_addr 00:1C:XX:XX:XX:70 setenv lan6_mac_addr 00:1C:XX:XX:XX:71 setenv lan7_mac_addr 00:1C:XX:XX:XX:72 setenv lan8_mac_addr 00:1C:XX:XX:XX:73 setenv dmz_mac_addr 00:1C:XX:XX:XX:74 setenv dsl_mac_addr 00:1C:XX:XX:XX:75 Step four -> flash u-boot: mw 0x0800000 0xffff 0x100000 nand erase 0x0 100000 tftp 0x0800000 openwrt-kirkwood-l50-u-boot.kwb nand write 0x0800000 0x0 0x100000 saveenv Step five -> run initramfs image: tftpboot 0x02000000 openwrt.bin; bootm 0x02000000; Step six -> install sysupgrade OpenWrt image: copy to /tmp/ sysupgrade image run sysupgrade Back to stock: Restore original u-boot end env. Install factory image via stock u-boot. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-01-26 16:22:28 +00:00
CONFIG_PINCTRL_SX150X=y
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
CONFIG_PLAT_ORION=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
# CONFIG_POWER_RESET_QNAP is not set
CONFIG_POWER_SUPPLY=y
CONFIG_RATIONAL=y
CONFIG_REFCOUNT_FULL=y
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_MV=y
CONFIG_RTC_I2C_AND_SPI=y
kirkwood: refresh kernel config It was made by running "make kernel_oldconfig". Suggested-by: Sungbo Eo <mans0n@gorani.run> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-05-02 19:26:22 +00:00
CONFIG_RTC_MC146818_LIB=y
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
CONFIG_SATA_PMP=y
CONFIG_SCSI=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_FSL=y
kirkwood: initial refresh 5.4 config Refreshed kernel config with updated NAND config. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:48:33 +00:00
CONFIG_SERIAL_MCTRL_GPIO=y
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
# CONFIG_SERIAL_MVEBU_UART is not set
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SGL_ALLOC=y
CONFIG_SG_POOL=y
CONFIG_SOC_BUS=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
# CONFIG_SPI_ARMADA_3700 is not set
CONFIG_SPI_MASTER=y
CONFIG_SPI_ORION=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_SRAM=y
CONFIG_SRAM_EXEC=y
CONFIG_SRCU=y
CONFIG_SWPHY=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_OF=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_TINY_SRCU=y
CONFIG_UBIFS_FS=y
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
kirkwood: initial refresh 5.4 config Refreshed kernel config with updated NAND config. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:48:33 +00:00
CONFIG_UNWINDER_ARM=y
kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-03-02 20:24:03 +00:00
CONFIG_USB=y
CONFIG_USB_COMMON=y
CONFIG_USB_LED_TRIG=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
# CONFIG_VFP is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_WAN=y
CONFIG_WATCHDOG_CORE=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
Reference in New Issue Copy Permalink