EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
3b874c2c81
Openwrt/target/linux/ath79/image/tiny-tp-link.mk

279 lines
7.0 KiB
Makefile
Raw Normal View History

ath79: add tiny subtarget Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2018-05-30 13:18:50 +00:00
include ./common-tp-link.mk
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
define Device/tplink_tl-mr10u
ath79: add TP-Link TL-MR10U port Signed-off-by: Adoal Xu <adoalxu@gmail.com>
2018-06-03 17:04:51 +00:00
$(Device/tplink-4mlzma)
ATH_SOC := ar9331
ath79: split DEVICE_TITLE in multiple variables This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-16 19:34:46 +00:00
DEVICE_MODEL := TL-MR10U
ath79: add TP-Link TL-MR10U port Signed-off-by: Adoal Xu <adoalxu@gmail.com>
2018-06-03 17:04:51 +00:00
DEVICE_PACKAGES := kmod-usb-chipidea2
TPLINK_HWID := 0x00100101
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
SUPPORTED_DEVICES += tl-mr10u
ath79: add TP-Link TL-MR10U port Signed-off-by: Adoal Xu <adoalxu@gmail.com>
2018-06-03 17:04:51 +00:00
endef
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
TARGET_DEVICES += tplink_tl-mr10u
ath79: add TP-Link TL-MR10U port Signed-off-by: Adoal Xu <adoalxu@gmail.com>
2018-06-03 17:04:51 +00:00
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
define Device/tplink_tl-mr3020-v1
ath79: add tl-mr3020-v1 support Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2018-06-08 08:51:00 +00:00
$(Device/tplink-4mlzma)
ATH_SOC := ar9331
ath79: split DEVICE_TITLE in multiple variables This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-16 19:34:46 +00:00
DEVICE_MODEL := TL-MR3020
DEVICE_VARIANT := v1
ath79: add tl-mr3020-v1 support Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2018-06-08 08:51:00 +00:00
DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x30200001
ath79: fix TL-MR3020 image metadata Sysupgrading to ath79 from ar71xx currently fails because of mismatching supported_devices. ar71xx is expecting "tl-mr3020" which is missing in the ath79 image. Upgrading from ath79 is unaffected, as the image contains the old string for ar71xx and the new one coming from the device-tree. Signed-off-by: David Bauer <mail@david-bauer.net>
2018-08-18 12:01:59 +00:00
SUPPORTED_DEVICES += tl-mr3020
ath79: add tl-mr3020-v1 support Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2018-06-08 08:51:00 +00:00
endef
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
TARGET_DEVICES += tplink_tl-mr3020-v1
ath79: add tl-mr3020-v1 support Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2018-06-08 08:51:00 +00:00
ath79: add support for TP-Link MR-3040 v2 Add support for the ar71xx supported TP-Link MR-3040 v2. Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
2018-08-13 14:14:54 +00:00
define Device/tplink_tl-mr3040-v2
$(Device/tplink-4mlzma)
ATH_SOC := ar9331
ath79: split DEVICE_TITLE in multiple variables This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-16 19:34:46 +00:00
DEVICE_MODEL := TL-MR3040
DEVICE_VARIANT := v2
ath79: add support for TP-Link MR-3040 v2 Add support for the ar71xx supported TP-Link MR-3040 v2. Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
2018-08-13 14:14:54 +00:00
DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x30400002
SUPPORTED_DEVICES += tl-mr3040-v2
endef
TARGET_DEVICES += tplink_tl-mr3040-v2
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
define Device/tplink_tl-mr3220-v1
ath79: add support for more AR7241 TP-Link boards Its common AP99(AR7241) platform with following devices: TP-Link TL-WR841N/ND v7 (SoC AR7241 / Wifi AR9287 / without USB) TP-Link TL-MR3220 v1 (SoC AR7241 / Wifi AR9285 / USB support) TP-Link TL-MR3420 v1 (SoC AR7241 / Wifi AR9287 / USB support) Signed-off-by: Dmytro Smyrnov <dioptimizer@hotmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-06-26 14:01:47 +00:00
$(Device/tplink-4m)
ATH_SOC := ar7241
ath79: split DEVICE_TITLE in multiple variables This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-16 19:34:46 +00:00
DEVICE_MODEL := TL-MR3220
DEVICE_VARIANT := v1
ath79: add support for more AR7241 TP-Link boards Its common AP99(AR7241) platform with following devices: TP-Link TL-WR841N/ND v7 (SoC AR7241 / Wifi AR9287 / without USB) TP-Link TL-MR3220 v1 (SoC AR7241 / Wifi AR9285 / USB support) TP-Link TL-MR3420 v1 (SoC AR7241 / Wifi AR9287 / USB support) Signed-off-by: Dmytro Smyrnov <dioptimizer@hotmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-06-26 14:01:47 +00:00
TPLINK_HWID := 0x32200001
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
SUPPORTED_DEVICES += tl-mr3220-v1
ath79: add support for more AR7241 TP-Link boards Its common AP99(AR7241) platform with following devices: TP-Link TL-WR841N/ND v7 (SoC AR7241 / Wifi AR9287 / without USB) TP-Link TL-MR3220 v1 (SoC AR7241 / Wifi AR9285 / USB support) TP-Link TL-MR3420 v1 (SoC AR7241 / Wifi AR9287 / USB support) Signed-off-by: Dmytro Smyrnov <dioptimizer@hotmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-06-26 14:01:47 +00:00
endef
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
TARGET_DEVICES += tplink_tl-mr3220-v1
ath79: add support for more AR7241 TP-Link boards Its common AP99(AR7241) platform with following devices: TP-Link TL-WR841N/ND v7 (SoC AR7241 / Wifi AR9287 / without USB) TP-Link TL-MR3220 v1 (SoC AR7241 / Wifi AR9285 / USB support) TP-Link TL-MR3420 v1 (SoC AR7241 / Wifi AR9287 / USB support) Signed-off-by: Dmytro Smyrnov <dioptimizer@hotmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-06-26 14:01:47 +00:00
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
define Device/tplink_tl-mr3420-v1
ath79: add support for more AR7241 TP-Link boards Its common AP99(AR7241) platform with following devices: TP-Link TL-WR841N/ND v7 (SoC AR7241 / Wifi AR9287 / without USB) TP-Link TL-MR3220 v1 (SoC AR7241 / Wifi AR9285 / USB support) TP-Link TL-MR3420 v1 (SoC AR7241 / Wifi AR9287 / USB support) Signed-off-by: Dmytro Smyrnov <dioptimizer@hotmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-06-26 14:01:47 +00:00
$(Device/tplink-4m)
ATH_SOC := ar7241
ath79: split DEVICE_TITLE in multiple variables This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-16 19:34:46 +00:00
DEVICE_MODEL := TL-MR3420
DEVICE_VARIANT := v1
ath79: add support for more AR7241 TP-Link boards Its common AP99(AR7241) platform with following devices: TP-Link TL-WR841N/ND v7 (SoC AR7241 / Wifi AR9287 / without USB) TP-Link TL-MR3220 v1 (SoC AR7241 / Wifi AR9285 / USB support) TP-Link TL-MR3420 v1 (SoC AR7241 / Wifi AR9287 / USB support) Signed-off-by: Dmytro Smyrnov <dioptimizer@hotmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-06-26 14:01:47 +00:00
TPLINK_HWID := 0x34200001
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
SUPPORTED_DEVICES += tl-mr3420-v1
ath79: add support for more AR7241 TP-Link boards Its common AP99(AR7241) platform with following devices: TP-Link TL-WR841N/ND v7 (SoC AR7241 / Wifi AR9287 / without USB) TP-Link TL-MR3220 v1 (SoC AR7241 / Wifi AR9285 / USB support) TP-Link TL-MR3420 v1 (SoC AR7241 / Wifi AR9287 / USB support) Signed-off-by: Dmytro Smyrnov <dioptimizer@hotmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-06-26 14:01:47 +00:00
endef
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
TARGET_DEVICES += tplink_tl-mr3420-v1
ath79: add support for more AR7241 TP-Link boards Its common AP99(AR7241) platform with following devices: TP-Link TL-WR841N/ND v7 (SoC AR7241 / Wifi AR9287 / without USB) TP-Link TL-MR3220 v1 (SoC AR7241 / Wifi AR9285 / USB support) TP-Link TL-MR3420 v1 (SoC AR7241 / Wifi AR9287 / USB support) Signed-off-by: Dmytro Smyrnov <dioptimizer@hotmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-06-26 14:01:47 +00:00
ath79: migrate TP-Link TL-MR3420v2 to ath79 Specifications: - SoC: ar9341 - RAM: 32M - Flash: 4M - Ethernet: 5x FE ports - WiFi: ar9341-wmac Flash instruction: Upload generated factory firmware on vendor's web interface. This changes the key assignment compared to ar71xx support of this device, since of the two keys on the device one is used as combined Reset/WPS and the second one as WiFi on/off button. Despite, the reset button required GPIO_ACTIVE_HIGH to work correctly. Signed-off-by: Lim Guo Wei <limguowei@gmail.com> [redo commit message] Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2019-08-12 07:54:11 +00:00
define Device/tplink_tl-mr3420-v2
$(Device/tplink-4mlzma)
ATH_SOC := ar9341
DEVICE_MODEL := TL-MR3420
DEVICE_VARIANT := v2
TPLINK_HWID := 0x34200002
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
SUPPORTED_DEVICES += tl-mr3420-v2
endef
TARGET_DEVICES += tplink_tl-mr3420-v2
ath79: add support for TP-Link TL-WA901ND v2 This commit adds support for the TP-Link TL-WR901ND v2 access point. CPU: Atheros AR9132 400MHz RAM: 32MB FLASH: 4MiB WiFi: Atheros AR9103 3x3:2 bgn LED: Power (static on) LAN (controlled by PHY) SYS, WiFi, QSS toggleable BTN: Reset, QSS Installation: Upload the factory image via the vendor-GUI. Signed-off-by: David Bauer <mail@david-bauer.net>
2018-10-07 13:13:31 +00:00
define Device/tplink_tl-wa901nd-v2
$(Device/tplink-4m)
ATH_SOC := ar9132
ath79: split DEVICE_TITLE in multiple variables This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-16 19:34:46 +00:00
DEVICE_MODEL := TL-WA901ND
DEVICE_VARIANT := v2
ath79: add support for TP-Link TL-WA901ND v2 This commit adds support for the TP-Link TL-WR901ND v2 access point. CPU: Atheros AR9132 400MHz RAM: 32MB FLASH: 4MiB WiFi: Atheros AR9103 3x3:2 bgn LED: Power (static on) LAN (controlled by PHY) SYS, WiFi, QSS toggleable BTN: Reset, QSS Installation: Upload the factory image via the vendor-GUI. Signed-off-by: David Bauer <mail@david-bauer.net>
2018-10-07 13:13:31 +00:00
TPLINK_HWID := 0x09010002
endef
TARGET_DEVICES += tplink_tl-wa901nd-v2
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
define Device/tplink_tl-wr703n
ath79: add TP-Link TL-WR703N port Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2018-05-30 13:18:54 +00:00
$(Device/tplink-4mlzma)
ATH_SOC := ar9331
ath79: split DEVICE_TITLE in multiple variables This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-16 19:34:46 +00:00
DEVICE_MODEL := TL-WR703N
ath79: add TP-Link TL-WR703N port Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2018-05-30 13:18:54 +00:00
DEVICE_PACKAGES := kmod-usb-chipidea2
TPLINK_HWID := 0x07030101
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
SUPPORTED_DEVICES += tl-wr703n
ath79: add TP-Link TL-WR703N port Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2018-05-30 13:18:54 +00:00
endef
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
TARGET_DEVICES += tplink_tl-wr703n
ath79: add TP-Link TL-WR703N port Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2018-05-30 13:18:54 +00:00
ath79: Fix led nodes for TL-WR740N v2 and add its clones This patch did the following things: 1. Separate ath9k-leds out of gpio leds so that all other leds will work before ath9k loded (e.g. during preinit/init stage). 2. Rename wps led to qss since that's how TP-Link mark it. 3. Rename LED prefix to tp-link because that dts is shared by many devices. 4. Rename to wr740n-v1 because v1 is the first and v2 just use the fw of v1. (This will require a forced sysupgrade if you comes from the previous wr740n v2 image.) 5. Remove SUPPORTED_DEVICES. (tl-wr740n-v2 doesn't exist anywhere so it's useless.) 6. Add all WR741ND v1 clones found in ar71xx. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 05:17:44 +00:00
define Device/tplink_tl-wr740n-v1
ath79: add TP-Link TL-WR740N/ND v2 port Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2018-05-30 13:18:53 +00:00
$(Device/tplink-4m)
ATH_SOC := ar7240
ath79: split DEVICE_TITLE in multiple variables This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-16 19:34:46 +00:00
DEVICE_MODEL := TL-WR740N
DEVICE_VARIANT := v1/v2
ath79: add TP-Link TL-WR740N/ND v2 port Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2018-05-30 13:18:53 +00:00
TPLINK_HWID := 0x07400001
endef
ath79: Fix led nodes for TL-WR740N v2 and add its clones This patch did the following things: 1. Separate ath9k-leds out of gpio leds so that all other leds will work before ath9k loded (e.g. during preinit/init stage). 2. Rename wps led to qss since that's how TP-Link mark it. 3. Rename LED prefix to tp-link because that dts is shared by many devices. 4. Rename to wr740n-v1 because v1 is the first and v2 just use the fw of v1. (This will require a forced sysupgrade if you comes from the previous wr740n v2 image.) 5. Remove SUPPORTED_DEVICES. (tl-wr740n-v2 doesn't exist anywhere so it's useless.) 6. Add all WR741ND v1 clones found in ar71xx. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 05:17:44 +00:00
TARGET_DEVICES += tplink_tl-wr740n-v1
define Device/tplink_tl-wr740n-v3
$(Device/tplink-4m)
ATH_SOC := ar7240
ath79: split DEVICE_TITLE in multiple variables This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-16 19:34:46 +00:00
DEVICE_MODEL := TL-WR740N
DEVICE_VARIANT := v3
ath79: Fix led nodes for TL-WR740N v2 and add its clones This patch did the following things: 1. Separate ath9k-leds out of gpio leds so that all other leds will work before ath9k loded (e.g. during preinit/init stage). 2. Rename wps led to qss since that's how TP-Link mark it. 3. Rename LED prefix to tp-link because that dts is shared by many devices. 4. Rename to wr740n-v1 because v1 is the first and v2 just use the fw of v1. (This will require a forced sysupgrade if you comes from the previous wr740n v2 image.) 5. Remove SUPPORTED_DEVICES. (tl-wr740n-v2 doesn't exist anywhere so it's useless.) 6. Add all WR741ND v1 clones found in ar71xx. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 05:17:44 +00:00
TPLINK_HWID := 0x07400003
endef
TARGET_DEVICES += tplink_tl-wr740n-v3
ath79: add support for more AR7241 TP-Link boards Its common AP99(AR7241) platform with following devices: TP-Link TL-WR841N/ND v7 (SoC AR7241 / Wifi AR9287 / without USB) TP-Link TL-MR3220 v1 (SoC AR7241 / Wifi AR9285 / USB support) TP-Link TL-MR3420 v1 (SoC AR7241 / Wifi AR9287 / USB support) Signed-off-by: Dmytro Smyrnov <dioptimizer@hotmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-06-26 14:01:47 +00:00
ath79: rename TL-WR740ND-v4 to TL-WR740N-v4 Give the device the same name it had in ar71xx. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2019-01-04 21:26:01 +00:00
define Device/tplink_tl-wr740n-v4
ath79: port TP-Link TL-WR741ND v4 and TL-WR740ND v4 This patch ports the TP-Link TL-WR741ND v4 and TL-WR740ND v4 to the ath79 target. Because the two devices share the same hw layout, this patch adds a common .dtsi which is included by the two .dts. Signed-off-by: Rocco Folino <rocco@folino.io>
2018-07-02 05:02:56 +00:00
$(Device/tplink-4mlzma)
ATH_SOC := ar9331
ath79: split DEVICE_TITLE in multiple variables This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-16 19:34:46 +00:00
DEVICE_MODEL := TL-WR740N
DEVICE_VARIANT := v4
ath79: port TP-Link TL-WR741ND v4 and TL-WR740ND v4 This patch ports the TP-Link TL-WR741ND v4 and TL-WR740ND v4 to the ath79 target. Because the two devices share the same hw layout, this patch adds a common .dtsi which is included by the two .dts. Signed-off-by: Rocco Folino <rocco@folino.io>
2018-07-02 05:02:56 +00:00
TPLINK_HWID := 0x07400004
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
SUPPORTED_DEVICES += tl-wr740n-v4
ath79: port TP-Link TL-WR741ND v4 and TL-WR740ND v4 This patch ports the TP-Link TL-WR741ND v4 and TL-WR740ND v4 to the ath79 target. Because the two devices share the same hw layout, this patch adds a common .dtsi which is included by the two .dts. Signed-off-by: Rocco Folino <rocco@folino.io>
2018-07-02 05:02:56 +00:00
endef
ath79: rename TL-WR740ND-v4 to TL-WR740N-v4 Give the device the same name it had in ar71xx. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2019-01-04 21:26:01 +00:00
TARGET_DEVICES += tplink_tl-wr740n-v4
ath79: port TP-Link TL-WR741ND v4 and TL-WR740ND v4 This patch ports the TP-Link TL-WR741ND v4 and TL-WR740ND v4 to the ath79 target. Because the two devices share the same hw layout, this patch adds a common .dtsi which is included by the two .dts. Signed-off-by: Rocco Folino <rocco@folino.io>
2018-07-02 05:02:56 +00:00
ath79: Fix led nodes for TL-WR740N v2 and add its clones This patch did the following things: 1. Separate ath9k-leds out of gpio leds so that all other leds will work before ath9k loded (e.g. during preinit/init stage). 2. Rename wps led to qss since that's how TP-Link mark it. 3. Rename LED prefix to tp-link because that dts is shared by many devices. 4. Rename to wr740n-v1 because v1 is the first and v2 just use the fw of v1. (This will require a forced sysupgrade if you comes from the previous wr740n v2 image.) 5. Remove SUPPORTED_DEVICES. (tl-wr740n-v2 doesn't exist anywhere so it's useless.) 6. Add all WR741ND v1 clones found in ar71xx. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 05:17:44 +00:00
define Device/tplink_tl-wr741-v1
$(Device/tplink-4m)
ATH_SOC := ar7240
ath79: split DEVICE_TITLE in multiple variables This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-16 19:34:46 +00:00
DEVICE_MODEL := TL-WR741N/ND
DEVICE_VARIANT := v1/v2
ath79: Fix led nodes for TL-WR740N v2 and add its clones This patch did the following things: 1. Separate ath9k-leds out of gpio leds so that all other leds will work before ath9k loded (e.g. during preinit/init stage). 2. Rename wps led to qss since that's how TP-Link mark it. 3. Rename LED prefix to tp-link because that dts is shared by many devices. 4. Rename to wr740n-v1 because v1 is the first and v2 just use the fw of v1. (This will require a forced sysupgrade if you comes from the previous wr740n v2 image.) 5. Remove SUPPORTED_DEVICES. (tl-wr740n-v2 doesn't exist anywhere so it's useless.) 6. Add all WR741ND v1 clones found in ar71xx. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 05:17:44 +00:00
TPLINK_HWID := 0x07410001
endef
TARGET_DEVICES += tplink_tl-wr741-v1
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
define Device/tplink_tl-wr741nd-v4
ath79: port TP-Link TL-WR741ND v4 and TL-WR740ND v4 This patch ports the TP-Link TL-WR741ND v4 and TL-WR740ND v4 to the ath79 target. Because the two devices share the same hw layout, this patch adds a common .dtsi which is included by the two .dts. Signed-off-by: Rocco Folino <rocco@folino.io>
2018-07-02 05:02:56 +00:00
$(Device/tplink-4mlzma)
ATH_SOC := ar9331
ath79: split DEVICE_TITLE in multiple variables This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-16 19:34:46 +00:00
DEVICE_MODEL := TL-WR741N/ND
DEVICE_VARIANT := v4
ath79: port TP-Link TL-WR741ND v4 and TL-WR740ND v4 This patch ports the TP-Link TL-WR741ND v4 and TL-WR740ND v4 to the ath79 target. Because the two devices share the same hw layout, this patch adds a common .dtsi which is included by the two .dts. Signed-off-by: Rocco Folino <rocco@folino.io>
2018-07-02 05:02:56 +00:00
TPLINK_HWID := 0x07410004
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
SUPPORTED_DEVICES += tl-wr741n-v4
ath79: port TP-Link TL-WR741ND v4 and TL-WR740ND v4 This patch ports the TP-Link TL-WR741ND v4 and TL-WR740ND v4 to the ath79 target. Because the two devices share the same hw layout, this patch adds a common .dtsi which is included by the two .dts. Signed-off-by: Rocco Folino <rocco@folino.io>
2018-07-02 05:02:56 +00:00
endef
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
TARGET_DEVICES += tplink_tl-wr741nd-v4
ath79: port TP-Link TL-WR741ND v4 and TL-WR740ND v4 This patch ports the TP-Link TL-WR741ND v4 and TL-WR740ND v4 to the ath79 target. Because the two devices share the same hw layout, this patch adds a common .dtsi which is included by the two .dts. Signed-off-by: Rocco Folino <rocco@folino.io>
2018-07-02 05:02:56 +00:00
ath79: Fix led nodes for TL-WR740N v2 and add its clones This patch did the following things: 1. Separate ath9k-leds out of gpio leds so that all other leds will work before ath9k loded (e.g. during preinit/init stage). 2. Rename wps led to qss since that's how TP-Link mark it. 3. Rename LED prefix to tp-link because that dts is shared by many devices. 4. Rename to wr740n-v1 because v1 is the first and v2 just use the fw of v1. (This will require a forced sysupgrade if you comes from the previous wr740n v2 image.) 5. Remove SUPPORTED_DEVICES. (tl-wr740n-v2 doesn't exist anywhere so it's useless.) 6. Add all WR741ND v1 clones found in ar71xx. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 05:17:44 +00:00
define Device/tplink_tl-wr743nd-v1
$(Device/tplink-4m)
ATH_SOC := ar7240
ath79: split DEVICE_TITLE in multiple variables This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-16 19:34:46 +00:00
DEVICE_MODEL := TL-WR743ND
DEVICE_VARIANT := v1
ath79: Fix led nodes for TL-WR740N v2 and add its clones This patch did the following things: 1. Separate ath9k-leds out of gpio leds so that all other leds will work before ath9k loded (e.g. during preinit/init stage). 2. Rename wps led to qss since that's how TP-Link mark it. 3. Rename LED prefix to tp-link because that dts is shared by many devices. 4. Rename to wr740n-v1 because v1 is the first and v2 just use the fw of v1. (This will require a forced sysupgrade if you comes from the previous wr740n v2 image.) 5. Remove SUPPORTED_DEVICES. (tl-wr740n-v2 doesn't exist anywhere so it's useless.) 6. Add all WR741ND v1 clones found in ar71xx. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 05:17:44 +00:00
TPLINK_HWID := 0x07430001
endef
TARGET_DEVICES += tplink_tl-wr743nd-v1
define Device/tplink_tl-wr841-v5
$(Device/tplink-4m)
ATH_SOC := ar7240
ath79: split DEVICE_TITLE in multiple variables This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-16 19:34:46 +00:00
DEVICE_MODEL := TL-WR841N/ND
DEVICE_VARIANT := v5/v6
ath79: Fix led nodes for TL-WR740N v2 and add its clones This patch did the following things: 1. Separate ath9k-leds out of gpio leds so that all other leds will work before ath9k loded (e.g. during preinit/init stage). 2. Rename wps led to qss since that's how TP-Link mark it. 3. Rename LED prefix to tp-link because that dts is shared by many devices. 4. Rename to wr740n-v1 because v1 is the first and v2 just use the fw of v1. (This will require a forced sysupgrade if you comes from the previous wr740n v2 image.) 5. Remove SUPPORTED_DEVICES. (tl-wr740n-v2 doesn't exist anywhere so it's useless.) 6. Add all WR741ND v1 clones found in ar71xx. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 05:17:44 +00:00
TPLINK_HWID := 0x08410005
endef
TARGET_DEVICES += tplink_tl-wr841-v5
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
define Device/tplink_tl-wr841-v7
ath79: add support for more AR7241 TP-Link boards Its common AP99(AR7241) platform with following devices: TP-Link TL-WR841N/ND v7 (SoC AR7241 / Wifi AR9287 / without USB) TP-Link TL-MR3220 v1 (SoC AR7241 / Wifi AR9285 / USB support) TP-Link TL-MR3420 v1 (SoC AR7241 / Wifi AR9287 / USB support) Signed-off-by: Dmytro Smyrnov <dioptimizer@hotmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-06-26 14:01:47 +00:00
$(Device/tplink-4m)
ATH_SOC := ar7241
ath79: split DEVICE_TITLE in multiple variables This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-16 19:34:46 +00:00
DEVICE_MODEL := TL-WR841N/ND
DEVICE_VARIANT := v7
ath79: add support for more AR7241 TP-Link boards Its common AP99(AR7241) platform with following devices: TP-Link TL-WR841N/ND v7 (SoC AR7241 / Wifi AR9287 / without USB) TP-Link TL-MR3220 v1 (SoC AR7241 / Wifi AR9285 / USB support) TP-Link TL-MR3420 v1 (SoC AR7241 / Wifi AR9287 / USB support) Signed-off-by: Dmytro Smyrnov <dioptimizer@hotmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-06-26 14:01:47 +00:00
TPLINK_HWID := 0x08410007
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
SUPPORTED_DEVICES += tl-wr841-v7
ath79: add support for more AR7241 TP-Link boards Its common AP99(AR7241) platform with following devices: TP-Link TL-WR841N/ND v7 (SoC AR7241 / Wifi AR9287 / without USB) TP-Link TL-MR3220 v1 (SoC AR7241 / Wifi AR9285 / USB support) TP-Link TL-MR3420 v1 (SoC AR7241 / Wifi AR9287 / USB support) Signed-off-by: Dmytro Smyrnov <dioptimizer@hotmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-06-26 14:01:47 +00:00
endef
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
TARGET_DEVICES += tplink_tl-wr841-v7
ath79: add support for tl-wr841n-v9 Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2018-07-30 13:21:12 +00:00
ath79: add support for TP-Link TL-WR841N/ND v8 CPU: Atheros AR9341 535MHz RAM: 32MB FLASH: 4MiB PORTS: 4 Port 100/10 Switch, 1 Port 100/10 Wan WiFi: Atheros AR9341 2x2:2 bgn LED: Power (static on), LAN (controlled by Switch), WAN, SYS, WiFi, RFKill BTN: WPS, WiFi, Reset Installation: Upload the factory image via the vendor-GUI. Signed-off-by: Antonio Silverio <menion@gmail.com> [resolve merge conflicts, squash commits, fix commit title, remove default default off led properties, mark sysupgrade image compatible with the ar71xx version of the board, drop blank lines from dts] Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-10-17 07:18:45 +00:00
define Device/tplink_tl-wr841-v8
$(Device/tplink-4mlzma)
ATH_SOC := ar9341
ath79: split DEVICE_TITLE in multiple variables This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-16 19:34:46 +00:00
DEVICE_MODEL := TL-WR841N/ND
DEVICE_VARIANT := v8
ath79: add support for TP-Link TL-WR841N/ND v8 CPU: Atheros AR9341 535MHz RAM: 32MB FLASH: 4MiB PORTS: 4 Port 100/10 Switch, 1 Port 100/10 Wan WiFi: Atheros AR9341 2x2:2 bgn LED: Power (static on), LAN (controlled by Switch), WAN, SYS, WiFi, RFKill BTN: WPS, WiFi, Reset Installation: Upload the factory image via the vendor-GUI. Signed-off-by: Antonio Silverio <menion@gmail.com> [resolve merge conflicts, squash commits, fix commit title, remove default default off led properties, mark sysupgrade image compatible with the ar71xx version of the board, drop blank lines from dts] Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-10-17 07:18:45 +00:00
TPLINK_HWID := 0x08410008
SUPPORTED_DEVICES += tl-wr841n-v8
endef
TARGET_DEVICES += tplink_tl-wr841-v8
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
define Device/tplink_tl-wr841-v9
ath79: add support for tl-wr841n-v9 Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2018-07-30 13:21:12 +00:00
$(Device/tplink-4mlzma)
ATH_SOC := qca9533
ath79: split DEVICE_TITLE in multiple variables This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-16 19:34:46 +00:00
DEVICE_MODEL := TL-WR841N/ND
DEVICE_VARIANT := v9
ath79: add support for tl-wr841n-v9 Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2018-07-30 13:21:12 +00:00
TPLINK_HWID := 0x08410009
ath79: add SUPPORTED_DEVICES for TP-Link TL-WR841N/ND v9 to v12 In ar71xx, v10 and v12 did not have separate board_name. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-22 15:42:39 +00:00
SUPPORTED_DEVICES += tl-wr841n-v9
ath79: add support for tl-wr841n-v9 Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2018-07-30 13:21:12 +00:00
endef
ath79: rename dts/image using manufacturer_board scheme This helps getting rid of SUPPORTED_DEVICES which can be auto-generated in image/Makefile. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 07:14:10 +00:00
TARGET_DEVICES += tplink_tl-wr841-v9
ath79: Fix led nodes for TL-WR740N v2 and add its clones This patch did the following things: 1. Separate ath9k-leds out of gpio leds so that all other leds will work before ath9k loded (e.g. during preinit/init stage). 2. Rename wps led to qss since that's how TP-Link mark it. 3. Rename LED prefix to tp-link because that dts is shared by many devices. 4. Rename to wr740n-v1 because v1 is the first and v2 just use the fw of v1. (This will require a forced sysupgrade if you comes from the previous wr740n v2 image.) 5. Remove SUPPORTED_DEVICES. (tl-wr740n-v2 doesn't exist anywhere so it's useless.) 6. Add all WR741ND v1 clones found in ar71xx. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 05:17:44 +00:00
ath79: add support for TP-Link TL-WR841N/ND v10 The TL-WR841N/ND v10 is mostly identical to the v9. Apart from some minor changes, it contains a newer revision of the QCA9533 SoC and the CPU clock is significantly higher. Flash instruction (WebUI): Download *-factory.bin image and upload it via the firmwary upgrade function of the stock firmware WebUI. Flash instruction (TFTP): 1. Set PC to fixed ip address 192.168.0.66 2. Download *-factory.bin image and rename it to wr841nv10_tp_recovery.bin 3. Start a tftp server with the image file in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-22 15:34:08 +00:00
define Device/tplink_tl-wr841-v10
$(Device/tplink-4mlzma)
ATH_SOC := qca9533
DEVICE_MODEL := TL-WR841N/ND
DEVICE_VARIANT := v10
TPLINK_HWID := 0x08410010
ath79: add SUPPORTED_DEVICES for TP-Link TL-WR841N/ND v9 to v12 In ar71xx, v10 and v12 did not have separate board_name. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-22 15:42:39 +00:00
SUPPORTED_DEVICES += tl-wr841n-v9
ath79: add support for TP-Link TL-WR841N/ND v10 The TL-WR841N/ND v10 is mostly identical to the v9. Apart from some minor changes, it contains a newer revision of the QCA9533 SoC and the CPU clock is significantly higher. Flash instruction (WebUI): Download *-factory.bin image and upload it via the firmwary upgrade function of the stock firmware WebUI. Flash instruction (TFTP): 1. Set PC to fixed ip address 192.168.0.66 2. Download *-factory.bin image and rename it to wr841nv10_tp_recovery.bin 3. Start a tftp server with the image file in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-22 15:34:08 +00:00
endef
TARGET_DEVICES += tplink_tl-wr841-v10
ath79: add support for TP-Link WR841N/ND v11 Specification: - SoC: Atheros AR9533 - Flash: 4 MB - RAM: 32 MB - Ethernet: 4x LAN (100M) / 1x WAN (100M) - WiFi: 2.4G 300M Flash instruction: Flash factory image from stock WebUI. Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de>
2018-08-13 13:28:51 +00:00
define Device/tplink_tl-wr841-v11
$(Device/tplink-4mlzma)
ATH_SOC := qca9533
ath79: split DEVICE_TITLE in multiple variables This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-16 19:34:46 +00:00
DEVICE_MODEL := TL-WR841N/ND
DEVICE_VARIANT := v11
ath79: add support for TP-Link WR841N/ND v11 Specification: - SoC: Atheros AR9533 - Flash: 4 MB - RAM: 32 MB - Ethernet: 4x LAN (100M) / 1x WAN (100M) - WiFi: 2.4G 300M Flash instruction: Flash factory image from stock WebUI. Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de>
2018-08-13 13:28:51 +00:00
TPLINK_HWID := 0x08410011
ath79: add SUPPORTED_DEVICES for TP-Link TL-WR841N/ND v9 to v12 In ar71xx, v10 and v12 did not have separate board_name. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-22 15:42:39 +00:00
SUPPORTED_DEVICES += tl-wr841n-v11
ath79: add support for TP-Link WR841N/ND v11 Specification: - SoC: Atheros AR9533 - Flash: 4 MB - RAM: 32 MB - Ethernet: 4x LAN (100M) / 1x WAN (100M) - WiFi: 2.4G 300M Flash instruction: Flash factory image from stock WebUI. Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de>
2018-08-13 13:28:51 +00:00
IMAGES += factory-us.bin factory-eu.bin
IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US
IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
endef
TARGET_DEVICES += tplink_tl-wr841-v11
ath79: add support for TP-Link TL-WR841N/ND v12 This router has the same hardware as TP-LINK TL-WR841N/ND v11 (same FCC ID, same TFTP image name...). Flash instruction (WebUI): Download *-factory.bin image and upload it via the firmwary upgrade function of the stock firmware WebUI. Flash instruction (TFTP): 1. Set PC to fixed ip address 192.168.0.66 2. Download *-factory.bin image and rename it to wr841nv11_tp_recovery.bin (it's really v11, not v12) 3. Start a tftp server with the image file in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-22 15:36:48 +00:00
define Device/tplink_tl-wr841-v12
$(Device/tplink-4mlzma)
ATH_SOC := qca9533
DEVICE_MODEL := TL-WR841N/ND
DEVICE_VARIANT := v12
TPLINK_HWID := 0x08410012
ath79: add SUPPORTED_DEVICES for TP-Link TL-WR841N/ND v9 to v12 In ar71xx, v10 and v12 did not have separate board_name. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-22 15:42:39 +00:00
SUPPORTED_DEVICES += tl-wr841n-v11
ath79: add support for TP-Link TL-WR841N/ND v12 This router has the same hardware as TP-LINK TL-WR841N/ND v11 (same FCC ID, same TFTP image name...). Flash instruction (WebUI): Download *-factory.bin image and upload it via the firmwary upgrade function of the stock firmware WebUI. Flash instruction (TFTP): 1. Set PC to fixed ip address 192.168.0.66 2. Download *-factory.bin image and rename it to wr841nv11_tp_recovery.bin (it's really v11, not v12) 3. Start a tftp server with the image file in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-22 15:36:48 +00:00
IMAGES += factory-us.bin factory-eu.bin
IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US
IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
endef
TARGET_DEVICES += tplink_tl-wr841-v12
ath79: add support for TP9343-based TP-Link TL-WR94x devices This adds support for several TP-Link devices based on TP9343 ("a QCA9561 without PCIe and USB"): - TL-WR940N v3 - TL-WR940N v4 - TL-WR941ND v6 The devices are only different concerning LEDs and MAC address assignment. All TL-WR940 are with non-detachable antennas (N), all TL-WR941 devices are with detachable antennas (ND). Specification: - 750 MHz CPU - 32 MB of RAM - 4 MB of FLASH - 2.4 GHz WiFi - 4x 10/100 Mbps Ethernet Flash instruction (WebUI): Download *-factory.bin image and upload it via the firmwary upgrade function of the stock firmware WebUI. Flash instruction (TFTP): 1. Set PC to fixed ip address 192.168.0.66 2. Download *-factory.bin image and rename it to * (see below) 3. Start a tftp server with the image file in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. * TFTP image names: 940 v3: wr941ndv6_tp_recovery.bin 940 v4: wr940nv4_tp_recovery.bin 941 v6: wr941ndv6_tp_recovery.bin Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-24 14:49:08 +00:00
define Device/tplink_tl-wr940n-v3
$(Device/tplink-4mlzma)
ATH_SOC := tp9343
DEVICE_MODEL := TL-WR940N
DEVICE_VARIANT := v3
TPLINK_HWID := 0x09410006
SUPPORTED_DEVICES += tl-wr941nd-v6
endef
TARGET_DEVICES += tplink_tl-wr940n-v3
define Device/tplink_tl-wr940n-v4
$(Device/tplink-4mlzma)
ATH_SOC := tp9343
DEVICE_MODEL := TL-WR940N
DEVICE_VARIANT := v4
TPLINK_HWID := 0x09400004
SUPPORTED_DEVICES += tl-wr940n-v4
IMAGES += factory-us.bin factory-eu.bin factory-br.bin
IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US
IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
IMAGE/factory-br.bin := append-rootfs | mktplinkfw factory -C BR
endef
TARGET_DEVICES += tplink_tl-wr940n-v4
ath79: add support for TP-Link TL-WR941N/ND v2/v3 Specification: - SoC: Atheros AR9132 - Flash: 4 MB - RAM: 32 MB - Ethernet: Marvell 88E6060 with 5 FE ports. Flash instruction: Upload the generated factory firmware on web interface. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-13 12:32:02 +00:00
define Device/tplink_tl-wr941-v2
$(Device/tplink-4m)
ATH_SOC := ar9132
ath79: split DEVICE_TITLE in multiple variables This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-16 19:34:46 +00:00
DEVICE_MODEL := TL-WR941N/ND
DEVICE_VARIANT := v2/v3
ath79: add support for TP-Link TL-WR941N/ND v2/v3 Specification: - SoC: Atheros AR9132 - Flash: 4 MB - RAM: 32 MB - Ethernet: Marvell 88E6060 with 5 FE ports. Flash instruction: Upload the generated factory firmware on web interface. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-13 12:32:02 +00:00
TPLINK_HWID := 0x09410002
TPLINK_HWREV := 2
endef
TARGET_DEVICES += tplink_tl-wr941-v2
ath79: Fix led nodes for TL-WR740N v2 and add its clones This patch did the following things: 1. Separate ath9k-leds out of gpio leds so that all other leds will work before ath9k loded (e.g. during preinit/init stage). 2. Rename wps led to qss since that's how TP-Link mark it. 3. Rename LED prefix to tp-link because that dts is shared by many devices. 4. Rename to wr740n-v1 because v1 is the first and v2 just use the fw of v1. (This will require a forced sysupgrade if you comes from the previous wr740n v2 image.) 5. Remove SUPPORTED_DEVICES. (tl-wr740n-v2 doesn't exist anywhere so it's useless.) 6. Add all WR741ND v1 clones found in ar71xx. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 05:17:44 +00:00
define Device/tplink_tl-wr941-v4
$(Device/tplink-4m)
ATH_SOC := ar7240
ath79: split DEVICE_TITLE in multiple variables This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-16 19:34:46 +00:00
DEVICE_MODEL := TL-WR941N/ND
DEVICE_VARIANT := v4
ath79: Fix led nodes for TL-WR740N v2 and add its clones This patch did the following things: 1. Separate ath9k-leds out of gpio leds so that all other leds will work before ath9k loded (e.g. during preinit/init stage). 2. Rename wps led to qss since that's how TP-Link mark it. 3. Rename LED prefix to tp-link because that dts is shared by many devices. 4. Rename to wr740n-v1 because v1 is the first and v2 just use the fw of v1. (This will require a forced sysupgrade if you comes from the previous wr740n v2 image.) 5. Remove SUPPORTED_DEVICES. (tl-wr740n-v2 doesn't exist anywhere so it's useless.) 6. Add all WR741ND v1 clones found in ar71xx. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-02 05:17:44 +00:00
TPLINK_HWID := 0x09410004
endef
TARGET_DEVICES += tplink_tl-wr941-v4
ath79: add support for TP-Link TL-WR941N v7 (CN) This adds support for the Chinese version of TL-WR941N v7. It uses QCA9558+AR8236 while the international version uses TP9343 instead. Specification: - SoC: Qualcomm Atheros QCA9558 - Flash: 4 MB - RAM: 64 MB - Ethernet: Atheros AR8236 with 5 FE ports Flash instruction: Upload the generated factory firmware on web interface. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2019-01-20 15:30:27 +00:00
ath79: add support for TP9343-based TP-Link TL-WR94x devices This adds support for several TP-Link devices based on TP9343 ("a QCA9561 without PCIe and USB"): - TL-WR940N v3 - TL-WR940N v4 - TL-WR941ND v6 The devices are only different concerning LEDs and MAC address assignment. All TL-WR940 are with non-detachable antennas (N), all TL-WR941 devices are with detachable antennas (ND). Specification: - 750 MHz CPU - 32 MB of RAM - 4 MB of FLASH - 2.4 GHz WiFi - 4x 10/100 Mbps Ethernet Flash instruction (WebUI): Download *-factory.bin image and upload it via the firmwary upgrade function of the stock firmware WebUI. Flash instruction (TFTP): 1. Set PC to fixed ip address 192.168.0.66 2. Download *-factory.bin image and rename it to * (see below) 3. Start a tftp server with the image file in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. * TFTP image names: 940 v3: wr941ndv6_tp_recovery.bin 940 v4: wr940nv4_tp_recovery.bin 941 v6: wr941ndv6_tp_recovery.bin Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-07-24 14:49:08 +00:00
define Device/tplink_tl-wr941nd-v6
$(Device/tplink-4mlzma)
ATH_SOC := tp9343
DEVICE_MODEL := TL-WR941ND
DEVICE_VARIANT := v6
TPLINK_HWID := 0x09410006
SUPPORTED_DEVICES += tl-wr941nd-v6
endef
TARGET_DEVICES += tplink_tl-wr941nd-v6
ath79: add support for TP-Link TL-WR941N v7 (CN) This adds support for the Chinese version of TL-WR941N v7. It uses QCA9558+AR8236 while the international version uses TP9343 instead. Specification: - SoC: Qualcomm Atheros QCA9558 - Flash: 4 MB - RAM: 64 MB - Ethernet: Atheros AR8236 with 5 FE ports Flash instruction: Upload the generated factory firmware on web interface. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2019-01-20 15:30:27 +00:00
define Device/tplink_tl-wr941n-v7-cn
$(Device/tplink-4mlzma)
ATH_SOC := qca9558
ath79: split DEVICE_TITLE in multiple variables This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-06-16 19:34:46 +00:00
DEVICE_MODEL := TL-WR941N
DEVICE_VARIANT := v7 (CN)
ath79: add support for TP-Link TL-WR941N v7 (CN) This adds support for the Chinese version of TL-WR941N v7. It uses QCA9558+AR8236 while the international version uses TP9343 instead. Specification: - SoC: Qualcomm Atheros QCA9558 - Flash: 4 MB - RAM: 64 MB - Ethernet: Atheros AR8236 with 5 FE ports Flash instruction: Upload the generated factory firmware on web interface. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2019-01-20 15:30:27 +00:00
TPLINK_HWID := 0x09410007
endef
TARGET_DEVICES += tplink_tl-wr941n-v7-cn
Reference in New Issue Copy Permalink